Commit Graph

Select branches

Hide Pull Requests

build123d-experimental

main

v1.0.0

v2.0.0

v2.0.1

v3.0.0

v3.1.0

v3.1.1

v3.2.0

v3.3.0

v3.3.1

v4.0.0

v4.1.0

v4.2.0

v4.2.1

v4.3.0

v4.3.1

v4.4.0

v4.4.1

v4.4.2

v4.4.3

v4.5.0

v4.6.0

v4.7.0

v4.7.1

Mono Color

• 82d914c30c
  
  TEMP build123d environment part 1 Brian S. Stephan 2024-07-02 10:24:13 -05:00
• 903b9b40ff
  
  actually update the blown up demo image after fixing the file Brian S. Stephan 2024-07-01 20:28:32 -05:00
• 9fd3658518
  
  parameterize more of the slashes used for windowed walls Brian S. Stephan 2024-06-28 12:01:49 -05:00
• bd7b908712
  
  make more windowed frame pieces, this time horizontal stripes Brian S. Stephan 2024-06-28 12:01:26 -05:00
• 61a67109ce
  
  fix alignment of a bottom overhang panel in the demo Brian S. Stephan 2024-06-25 17:02:03 -05:00
• ff85423cee
  
  DRY the frame wall slashes and parameterize them a bit Brian S. Stephan 2024-06-25 17:01:21 -05:00
• ca655012c5
  
  start a CHANGELOG for v4.4 and backfill old notes v4.4.0 Brian S. Stephan 2024-06-24 16:17:06 -05:00
• 3059e01b8f
  
  update build blown up demo and example photo Brian S. Stephan 2024-06-24 15:49:22 -05:00
• 2911b23db4
  
  rewrite "plates" as two separate plates Brian S. Stephan 2024-06-24 15:35:43 -05:00
• 00a1bbc065
  
  don't error if the necessary build directories already exist Brian S. Stephan 2024-06-24 15:35:14 -05:00
• 6726233beb
  
  favor symmetry in the front/back and side wall windowed pieces Brian S. Stephan 2024-06-22 09:01:19 -05:00
• bc68f8b0dc
  
  naming consistency: panels are top/bottom Brian S. Stephan 2024-06-21 10:28:56 -05:00
• de3914fa85
  
  more documentation updates for the assembly, after renaming stuff Brian S. Stephan 2024-06-21 09:07:46 -05:00
• 92d3f9e6d5
  
  some minor documentation updates Brian S. Stephan 2024-06-21 08:39:53 -05:00
• 8168797be3
  
  rewrite the README notes on parts, now that I reorganized them Brian S. Stephan 2024-06-21 08:36:08 -05:00
• 244ace1b4a
  
  add box pieces for a vent kind of look Brian S. Stephan 2024-06-21 08:34:18 -05:00
• db887b668f
  
  reorganize all the parts into subdirectories Brian S. Stephan 2024-06-20 17:36:22 -05:00
• dccd2836b2
  
  start some frame pieces that have openings for decoration Brian S. Stephan 2024-06-20 14:02:19 -05:00
• 2ed9b12ed3
  
  simplify my Makefile by writing the build stuff in Python Brian S. Stephan 2024-06-20 10:51:16 -05:00
• de0fcfd160
  
  use gray in the demo so that it's easier to see edges Brian S. Stephan 2024-06-19 13:28:23 -05:00
• 4e65445e16
  
  fix the extended pieces, sans 45 degree box corner Brian S. Stephan 2024-06-19 13:23:01 -05:00
• d578890d96
  
  rename box-style frame pieces to be explicitly for boxes Brian S. Stephan 2024-06-19 12:54:13 -05:00
• db41aa1183
  
  add demo of a stick as if was assembled Brian S. Stephan 2024-06-19 11:12:33 -05:00
• 0d954c2630
  
  fix the blown up demo and move it to a demo/ dir Brian S. Stephan 2024-06-19 10:46:27 -05:00
• 60b52eb10d
  
  DRY: base top_or_bottom_aux_and_neutrik_frame_piece on basic piece Brian S. Stephan 2024-06-19 10:05:07 -05:00
• 63c7ade41d
  
  split the top/bottom and side walls' corners in the middle Brian S. Stephan 2024-06-19 09:57:38 -05:00
• eaaa92004f
  
  scoot the 3 aux buttons a bit closer to the edge Brian S. Stephan 2024-06-18 13:58:55 -05:00
• cf218ecc1d
  
  tweaks to the frame pieces for better names and post sizes Brian S. Stephan 2024-06-18 07:37:52 -05:00
• 8fd77375b7
  
  parameterize the construction of the frame_mount_column chamfer Brian S. Stephan 2024-06-17 12:22:31 -05:00
• a9911820c9
  
  make a base for the little stand things Brian S. Stephan 2024-06-17 11:51:34 -05:00
• b9ba201c99
  
  add a shiokenstar layout and top panels Brian S. Stephan 2024-06-17 11:24:32 -05:00
• 3bd36cfbdf
  
  leave a section of full frame after a neutrik cutout Brian S. Stephan 2024-05-30 08:03:52 -05:00
• 89e25bd001
  
  lengthen the stand to give more support Brian S. Stephan 2024-05-20 10:11:52 -05:00
• a6803450f8
  
  raise the stand piece slightly Brian S. Stephan 2024-05-20 10:09:44 -05:00
• e41f3f4c6c
  
  a new stand, far simpler and smaller than the old Brian S. Stephan 2024-05-19 15:43:09 -05:00
• 3ec6132547
  
  tweak the interchange hole slightly to fit center layouts a bit better Brian S. Stephan 2024-05-13 12:44:01 -05:00
• b43b79ce19
  
  commit the frame_box component necessary for the abandoned mount Brian S. Stephan 2024-05-11 09:44:41 -05:00
• f93f20997a
  
  move the fancy mount into the attic Brian S. Stephan 2024-05-11 09:41:15 -05:00
• 70b45fa18b
  
  make a fancy mount for showing off sticks Brian S. Stephan 2024-05-01 08:11:40 -05:00
• e50629d372
  
  make the frame routing hole a semicircle on one side Brian S. Stephan 2024-04-23 17:15:03 -05:00
• 01d4d95f24
  
  update the blown up demo, now with frame pieces Brian S. Stephan 2024-04-22 12:39:56 -05:00
• 4cefdfa26b
  
  move the DCO into CONTRIBUTING.md Brian S. Stephan 2024-04-12 00:56:49 -05:00
• dabfc4258b
  
  include the right file following its rename v4.3.1 Brian S. Stephan 2024-04-05 18:49:09 -05:00
• a7206add7c
  
  updated assembly instructions, simpler without posts v4.3.0 Brian S. Stephan 2024-04-05 10:25:44 -05:00
• d70a2f90c6
  
  remove the frame posts from panels, more trouble than they're worth Brian S. Stephan 2024-04-04 16:33:29 -05:00
• 0513da125f
  
  don't recommend fiddling with the initial layer height/width Brian S. Stephan 2024-04-04 14:16:48 -05:00
• e7543dceb0
  
  dedupe top left and right frame pieces, they're the same shape Brian S. Stephan 2024-04-03 18:00:58 -05:00
• 45439cbf6d
  
  things might have actually been warping a bit more with the higher temps Brian S. Stephan 2024-04-01 16:11:43 -05:00
• b21cb75816
  
  add some documentation to the built STLs .zip v4.2.1 Brian S. Stephan 2024-03-21 19:00:13 -05:00
• 882a34db55
  
  rewrite Makefile to allow parallelization Brian S. Stephan 2024-03-21 18:15:10 -05:00
• 90f5670c2a
  
  more notes on printing settings for the parts Brian S. Stephan 2024-03-21 17:36:03 -05:00
• 96342f1b16
  
  general assembly instructions Brian S. Stephan 2024-03-18 18:14:30 -05:00
• 7bc6acfb93
  
  updated photo for the README, showing the large bevels Brian S. Stephan 2024-03-18 18:14:06 -05:00
• 16f41fe245
  
  more notes on printing and bottom layer patterns Brian S. Stephan 2024-03-18 10:22:13 -05:00
• c8881fc172
  
  document observations on printing settings Brian S. Stephan 2024-03-16 11:28:25 -05:00
• 1f8b5d527b
  
  reorder the attribution section a bit Brian S. Stephan 2024-03-15 09:48:52 -05:00
• edf5729a85
  
  document a trick for getting panels out in this frictioned world v4.2.0 Brian S. Stephan 2024-03-14 18:59:05 -05:00
• 3a1494c021
  
  s/spacer/standoff/ Brian S. Stephan 2024-03-14 18:51:48 -05:00
• 9125105b42
  
  correct name of the extra extended side piece Brian S. Stephan 2024-03-09 12:49:49 -06:00
• cadf2bf210
  
  add pieces vaguely like the TE1 sides as alternative frame sides Brian S. Stephan 2024-03-07 19:15:31 -06:00
• 0993c0f292
  
  sales pitch (tongue in cheek) preamble in the README Brian S. Stephan 2024-03-06 14:10:31 -06:00
• 954ce38f07
  
  clean up the part descriptions slightly in the README Brian S. Stephan 2024-03-06 13:31:15 -06:00
• 832d5ede8b
  
  update example images in the README Brian S. Stephan 2024-03-06 13:30:02 -06:00
• 341f6cfc6a
  
  add to the complications of the box frame method in the notes v4.1.0 Brian S. Stephan 2024-03-06 13:02:43 -06:00
• 308c21fb61
  
  add more parts notes to the README Brian S. Stephan 2024-03-06 12:01:26 -06:00
• c7befe0800
  
  update the TODO Brian S. Stephan 2024-03-06 11:41:50 -06:00
• 41bfe3a661
  
  bevel overhang panels in the same way as the frame Brian S. Stephan 2024-03-06 11:40:10 -06:00
• 412e6231d5
  
  better parameterize frame bevel based on frame_bevel_height Brian S. Stephan 2024-03-06 11:33:09 -06:00
• 0ed6b32911
  
  move the "extra lip" to the side pieces instead of the top/bottom Brian S. Stephan 2024-03-05 14:33:06 -06:00
• 155cba6d85
  
  modularize the frame into separate wall pieces Brian S. Stephan 2024-03-03 18:33:55 -06:00
• 0708540ac7
  
  restore the inset tray to the bottom overhang panel Brian S. Stephan 2024-03-03 14:03:31 -06:00
• 4c224b8a60
  
  rename bottom-panel.scad to -inset.scad for clarity's sake Brian S. Stephan 2024-03-03 13:58:04 -06:00
• e2e6acc0ca
  
  use the same plate with posts for the bottom panel Brian S. Stephan 2024-03-03 13:55:35 -06:00
• 3b886d3994
  
  simplify the interchange hole to make print easier Brian S. Stephan 2024-03-03 13:46:50 -06:00
• d97f68a5cd
  
  improve the edge (and name) of the frame bevel Brian S. Stephan 2024-03-01 13:30:58 -06:00
• 390df34f2b
  
  frames: re-bevel the bottom and top, center buttons Brian S. Stephan 2024-03-01 09:36:58 -06:00
• 365faebfcb
  
  parameterize frame_mount_column_width Brian S. Stephan 2024-03-01 07:56:41 -06:00
• da54b160e9
  
  update the reference to IRC in the README Brian S. Stephan 2024-02-25 00:27:50 -06:00
• 4cc110e791
  
  replace the copy of the GPLv3 with one that is formatted better Brian S. Stephan 2024-02-22 23:27:02 -06:00
• 05dab45152
  
  fix the blown up demo and update it for the docs v4.0.0 Brian S. Stephan 2024-02-22 13:36:46 -06:00
• 180b7deb9e
  
  update costs in the README based on new settings Brian S. Stephan 2024-02-22 13:32:43 -06:00
• 8987d403ce
  
  don't build another SCAD file I have locally for tinkering Brian S. Stephan 2024-02-22 13:09:05 -06:00
• 44a238f454
  
  move the lever mount spacer out of the panels, into separate part Brian S. Stephan 2024-02-20 12:25:14 -06:00
• ed031b9308
  
  create 2mm of additional frame bottom Brian S. Stephan 2024-02-20 08:07:29 -06:00
• 296e6da14b
  
  link to a couple presences in the README Brian S. Stephan 2024-02-19 23:35:00 -06:00
• c0c9b9e1dc
  
  adjust how the lever mount is aligned to do the chopper right Brian S. Stephan 2024-02-19 11:14:14 -06:00
• b7af797349
  
  un-inset the bottom panels, the bottom is now flush Brian S. Stephan 2024-02-19 10:41:59 -06:00
• dd3d77ae90
  
  correct the hole for the panel-to-frame post Brian S. Stephan 2024-02-19 10:33:16 -06:00
• f90fc095e0
  
  remove the bottom bevel to try to simplify the print Brian S. Stephan 2024-02-18 12:36:51 -06:00
• f54aa989f7
  
  bevel all the top edges of the frame Brian S. Stephan 2024-02-18 10:28:10 -06:00
• abc4577173
  
  bevel the bottom of the frame Brian S. Stephan 2024-02-16 12:25:17 -06:00
• 7b2289624e
  
  fix an old math mistake with the spacing of 24mm aux buttons Brian S. Stephan 2024-02-15 15:25:23 -06:00
• 15083f6787
  
  adjust the top panel post holes to fit appropriately Brian S. Stephan 2024-02-14 14:33:10 -06:00
• a5724209fe
  
  restore space for the hex bolts in the base panel frame posts Brian S. Stephan 2024-02-14 08:18:48 -06:00
• 78a43e41bc
  
  fix imports of the overhang panels following renames Brian S. Stephan 2024-02-12 20:10:14 -06:00
• 370aeb56c6
  
  add posts to the top panels Brian S. Stephan 2024-02-11 20:10:04 -06:00
• 06c27bd4aa
  
  only round the sides, not the top/bottom, of the frame Brian S. Stephan 2024-02-11 19:02:47 -06:00
• 773433cd10
  
  add a chamfer to the frame mount columns Brian S. Stephan 2024-02-09 18:47:21 -06:00
• bad3c7628f
  
  grow the frame, remove the bottom panel basin Brian S. Stephan 2024-02-09 15:00:05 -06:00
• 6a1e1cc1f3
  
  better component/parameter names to match panel naming Brian S. Stephan 2024-02-09 14:06:13 -06:00