add some documentation to the built STLs .zip

Signed-off-by: Brian S. Stephan <bss@incorporeal.org>

Makefile

@@ -3,7 +3,13 @@ OBJECTS := $(filter-out $(EXCLUDES),$(patsubst src/%.scad,%,$(wildcard src/*.sca
 dir_guard=@mkdir -p ./build
 
 all:	$(OBJECTS)
-	zip ./build/buildable-stick-system-`git describe --dirty`-stls.zip ./build/*
+	$(dir_guard)
+	mkdir -p ./build/docs
+	cp ./docs/README-objects.md ./build/README.md
+	cp ./docs/assembly-and-tips.md ./build/docs/assembly-and-tips.md
+	cp ./docs/printing-and-materials.md ./build/docs/printing-and-materials.md
+	cp ./LICENSE ./build/LICENSE
+	pushd ./build; zip ./buildable-stick-system-`git describe --dirty`-stls.zip . -r; popd
 
 $(OBJECTS):
 	$(dir_guard)

docs/README-objects.md

@@ -0,0 +1,65 @@
+# The Buildable Stick System
+
+Files for 3D printing an arcade stick.
+
+## Objects
+
+The following notes document the objects in the Buildable Stick System and how you can use them:
+
+* `bottom-panel-inset`: a simple solid panel that fits into the bottom of a frame box.
+* `bottom-panel-overhang-*`: solid panels whose base fits into the bottom of a frame box, but have a longer sheet that
+  extends beyond the frame, creating a sandwich kind of look; the various forms hang over more or less of the frame,
+  expecting it will be connected to other frames.
+* `frame-{left,middle,right,solo}`: the core frame of the stick, these are complete boxes; since they are long and
+  narrow, and need supports to print the space for the insets, these may be difficult to print nicely.
+* `frame-piece-*`: the core frame broken up by individual faces, which are easier to print and essentially just as
+  sturdy.
+* `frame-piece-*-extended*`: frame pieces that have been stretched out beyond the normal frame dimensions in order to
+  make a nice bevel on the sides and/or bottom; this, interestingly, tends to make the stick look a bit thinner than if
+  it was just a simple box.
+* `misc-decorative-plate-*`: things you can print to snazz up face buttons mounting, auxillary button points, etc..
+* `misc-dustwasher-*`: simple dustwashers for levers.
+* `misc-lever-mount-*`: lever mounts of various shapes and depths to get the desired lever height when mounting a lever
+  to a panel (with the appropriate cutouts).
+* `misc-neutrik-*`: like the decorative plates, but these are a bit more necessary by their design.
+* `misc-rocker-*`: rocker SPDT switches don't have mounting holes, this allows you to attach them to the frame.
+* `top-panel-inset-*`: various lever and/or button layouts for using as the face(s) of a stick.
+* `top-panel-overhang-`: same idea as the inset top panels, but overhung over the frame to make the sandwich look; these
+  also leave a bit more space inside the frame, which might accommodate a taller lever.
+
+Feel free to request or contribute to more objects, see the links to Git repos below.
+
+## Printing and Assembling
+
+Additional documentation regarding printing the objects and assembling the stick are available in
+`docs/printing-and-materials.md` and `docs/assembly-and-tips.md`, respectively.
+
+## Author and Licensing
+
+Written by and copyright Brian S. Stephan (<bss@incorporeal.org>).
+
+These arcade stick parts are from the Buildable Stick System; the source code to this program is available under the
+terms of the GNU General Public License, at:
+
+* <https://github.com/bsstephan/buildable-stick-system>, or
+* <https://git.incorporeal.org/bss/buildable-stick-system>
+
+See the tags/releases for the version of the source code corresponding to the STLs you received.
+
+The Buildable Stick System is free software: you can redistribute it and/or modify it under the terms of the GNU General
+Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any
+later version.
+
+The Buildable Stick System is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the
+implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
+details.
+
+You should have received a copy of the GNU General Public License along with the Buildable Stick System. If not, see
+<https://www.gnu.org/licenses/>.
+
+## Lineage
+
+Inspired by the incredible work of [TheTrain](https://github.com/TheTrainGoes) on the [OpenStickCommunity Fightstick
+Case](https://github.com/OpenStickCommunity/Hardware/tree/main/Fightstick%20Case), itself based on the incredible work
+by [Dash n'Mash](https://twitter.com/Dash_xx_Mash?s=20). Original work Copyright 2023 TheTrain, [licensed under CC BY
+4.0](https://creativecommons.org/licenses/by/4.0/).