Brian S. Stephan
ff19699d61
update TODO and README notes
...
no known issues!
2023-09-06 14:47:14 -05:00
Brian S. Stephan
8140d5e3a8
neutrik D base plate, also good as a cover
2023-09-06 14:44:54 -05:00
Brian S. Stephan
708122e510
dustwasher that fits the LSX-NOBI, maybe more
2023-09-06 11:30:52 -05:00
Brian S. Stephan
b704f158db
start v3 TODO
2023-09-05 11:47:50 -05:00
Brian S. Stephan
5177090625
rename some misc files for consistency/sorting
2023-09-05 10:41:59 -05:00
Brian S. Stephan
679d3025fe
decorative plate for a neutrik D mount
...
this is used for the outside of an ethercon, for instance
2023-09-03 09:56:53 -05:00
Brian S. Stephan
e68ffbfc7b
decorative button surround plates for the top
2023-09-03 09:53:49 -05:00
Brian S. Stephan
ed3c5a1210
rename non-overhang panels accordingly
2023-09-01 15:54:55 -05:00
Brian S. Stephan
fbf919b764
bottom panels with overhang for left/right/middle
2023-09-01 15:50:31 -05:00
Brian S. Stephan
9881f6391e
more top panel with overhang options
...
left/middle/right/solo is the overhang stuff, will need to rename the
inset ones at a later point
2023-09-01 13:39:48 -05:00
Brian S. Stephan
bfae2b093b
create a top left (overhang) lever panel
...
this replaces the left-adjusted inset panel, which I didn't use anyway,
and starts normalizing the overhang panels more
2023-09-01 13:38:29 -05:00
Brian S. Stephan
43a036e17c
consolidate button hole and wider cylinder into one object
...
nothing was materially using the non-snap-in cutout anymore (except for
the frame which wasn't updated since removing the bigger cutout
rectangle, so I fixed that), and I want to use it for a template thing
I'm working on, so remove some cruft
2023-08-30 10:02:12 -05:00
Brian S. Stephan
3b964ee6d8
scoot the buttons in panels a bit closer to each other
2023-08-30 00:24:19 -05:00
Brian S. Stephan
fe0e3b6017
center the button panels and their layouts
...
I can refactor the double translation away at soem later point
2023-08-30 00:22:31 -05:00
Brian S. Stephan
16d3feadc1
use the larger concaveness from the overhang panel
2023-08-29 23:33:54 -05:00
Brian S. Stephan
1db6577f75
remove unused, unnecessary panel with no concave
...
rename bottom panels now that concave is normal
2023-08-29 23:33:51 -05:00
Brian S. Stephan
cd5cd422e5
rename side chopper, going to be used for more than just frames
2023-08-29 10:13:40 -05:00
Brian S. Stephan
652653180e
go back to three neutrik D mounts on the solo frame
...
this (barely) works
2023-08-29 10:07:08 -05:00
Brian S. Stephan
73e93d4536
make a bottom overhang plate
...
slightly different than the top since there's no inset, so no need for
that frame or the posts
2023-08-29 10:06:21 -05:00
Brian S. Stephan
e51b79a193
squeeze dir. arc + W w/8 buttons on one panel
...
it's a tight squeeze; fits in the frame, but frame buttons/quick
connects maybe a problem
2023-08-28 10:51:07 -05:00
Brian S. Stephan
694e2c6173
bring 5 mm back to the frame
...
to accommodate quick connects, levers, etc.
2023-08-28 10:47:53 -05:00
Brian S. Stephan
a8ca6bafa9
fix the frame support box again
...
math is even harder when you're not using the right variables
2023-08-28 00:08:48 -05:00
Brian S. Stephan
cd71ed013b
fix the frame box width, which was too thin bc math is hard
2023-08-27 15:17:24 -05:00
Brian S. Stephan
12273649f5
better name for the 24mm dir + 6 button panel
2023-08-27 14:36:34 -05:00
Brian S. Stephan
57be13d9cb
more accurate name for the neutrik D plate
2023-08-26 22:12:07 -05:00
Brian S. Stephan
344de2c84f
standalone frame, with tweaks to the frame as a consequence
...
* frame width has been reduced in order to leave more space and have
sunken buttons somewhat accessible
* the cutout for neutrik mounts has been reduced and moved into the
holes themselves, to do this more modularly and restore some support
2023-08-26 21:57:12 -05:00
Brian S. Stephan
a8d02f9229
squish a decent all buttons layout onto one panel
...
this uses the new raised panel look, I'm trying it out but haven't
updated the other top panels yet until I'm sure I like it --- it'll mean
a lot of chopping
2023-08-26 14:48:01 -05:00
Brian S. Stephan
af38f0a580
move top plate holes into reusable module
2023-08-26 14:42:58 -05:00
Brian S. Stephan
19fa31b425
a one-panel 24mm dir arc + action buttons layout
...
(you can fit 6! not bad!)
2023-08-25 15:36:41 -05:00
Brian S. Stephan
6ca57615e4
solve for 24mm/30mm snap-ins
2023-08-25 15:36:38 -05:00
Brian S. Stephan
8fc51019c3
really simple Makefile to compile the STLs
2023-08-24 23:23:41 -05:00
Brian S. Stephan
f7fa46a074
include an example of what's possible
2023-08-24 23:11:43 -05:00
Brian S. Stephan
9f98f0cfa7
rename project before sharing
2023-08-24 22:49:34 -05:00
Brian S. Stephan
a3608492fb
considerably more README documentation
2023-08-24 19:51:07 -05:00
Brian S. Stephan
144e512433
licensing language tweaks
2023-08-24 15:04:11 -05:00
Brian S. Stephan
b0ca4d97c8
neutrik D plate to attach SPDT switches to
2023-08-24 12:54:42 -05:00
Brian S. Stephan
94a2e372f1
another improvement to make to v2
2023-08-24 10:16:35 -05:00
Brian S. Stephan
084f812541
directional buttons panel with PCB mount
...
also more notes for v2
2023-08-23 22:27:01 -05:00
Brian S. Stephan
21467010a7
split lever panel and w/mount variant into two files
2023-08-23 10:37:52 -05:00
Brian S. Stephan
cc7c5c5723
namco noir with even MOAR BUTTONS
2023-08-22 12:23:20 -05:00
Brian S. Stephan
4020eabb31
for next time: fix snap-ins
2023-08-22 12:22:29 -05:00
Brian S. Stephan
00e8344a91
panel for 30mm "directional arc" buttons + W + one extra
...
the extra could be mapped to L3 or soemthing like that, for SF6 or other
weirdos
2023-08-21 15:00:28 -05:00
Brian S. Stephan
0362e8f3ed
concave bottom panel to account for levers
...
(see notes in TODO)
2023-08-21 08:42:30 -05:00
Brian S. Stephan
facee903cf
add mount for a standard PS360+/RP2040ABB form factor PCB
2023-08-20 23:59:24 -05:00
Brian S. Stephan
f5ecdc9154
shrink the JLF mount panel height by 1mm
...
trying to shave a couple mm off the design to make room for this Seimitsu SEL-70X-F
2023-08-20 23:54:50 -05:00
Brian S. Stephan
80079a74a8
properly center frame mounting holes
...
noticed this after my first print, it's a fix for v1 but I don't think
I'll bother reprinting my stuff yet
2023-08-20 18:24:25 -05:00
Brian S. Stephan
40692bb6ff
bottom panel is just the base top panel
2023-08-20 09:56:47 -05:00
Brian S. Stephan
33271abef0
leaving some notes and comments for myself
2023-08-20 09:56:02 -05:00
Brian S. Stephan
f46500e941
start a TODO document for noticed future tweaks
2023-08-19 22:33:02 -05:00
Brian S. Stephan
6064884a89
account for 24mm buttons in the frame tops
2023-08-19 17:51:01 -05:00