-
b43b79ce19
commit the frame_box component necessary for the abandoned mount
main
Brian S. Stephan
2024-05-11 09:44:41 -0500
-
f93f20997a
move the fancy mount into the attic
Brian S. Stephan
2024-05-11 09:41:15 -0500
-
70b45fa18b
make a fancy mount for showing off sticks
Brian S. Stephan
2024-05-01 08:11:40 -0500
-
e50629d372
make the frame routing hole a semicircle on one side
Brian S. Stephan
2024-04-23 17:15:03 -0500
-
01d4d95f24
update the blown up demo, now with frame pieces
Brian S. Stephan
2024-04-22 12:39:56 -0500
-
4cefdfa26b
move the DCO into CONTRIBUTING.md
Brian S. Stephan
2024-04-12 00:56:49 -0500
-
dabfc4258b
include the right file following its rename
v4.3.1
Brian S. Stephan
2024-04-05 18:49:09 -0500
-
a7206add7c
updated assembly instructions, simpler without posts
v4.3.0
Brian S. Stephan
2024-04-05 10:25:44 -0500
-
d70a2f90c6
remove the frame posts from panels, more trouble than they're worth
Brian S. Stephan
2024-04-04 16:33:29 -0500
-
0513da125f
don't recommend fiddling with the initial layer height/width
Brian S. Stephan
2024-04-04 14:16:48 -0500
-
e7543dceb0
dedupe top left and right frame pieces, they're the same shape
Brian S. Stephan
2024-04-03 18:00:58 -0500
-
45439cbf6d
things might have actually been warping a bit more with the higher temps
Brian S. Stephan
2024-04-01 16:11:43 -0500
-
b21cb75816
add some documentation to the built STLs .zip
v4.2.1
Brian S. Stephan
2024-03-21 19:00:13 -0500
-
882a34db55
rewrite Makefile to allow parallelization
Brian S. Stephan
2024-03-21 18:15:10 -0500
-
90f5670c2a
more notes on printing settings for the parts
Brian S. Stephan
2024-03-21 17:36:03 -0500
-
96342f1b16
general assembly instructions
Brian S. Stephan
2024-03-18 18:14:30 -0500
-
7bc6acfb93
updated photo for the README, showing the large bevels
Brian S. Stephan
2024-03-18 18:14:06 -0500
-
16f41fe245
more notes on printing and bottom layer patterns
Brian S. Stephan
2024-03-18 10:22:13 -0500
-
c8881fc172
document observations on printing settings
Brian S. Stephan
2024-03-16 11:28:25 -0500
-
1f8b5d527b
reorder the attribution section a bit
Brian S. Stephan
2024-03-15 09:48:52 -0500
-
edf5729a85
document a trick for getting panels out in this frictioned world
v4.2.0
Brian S. Stephan
2024-03-14 18:59:05 -0500
-
3a1494c021
s/spacer/standoff/
Brian S. Stephan
2024-03-14 18:51:48 -0500
-
9125105b42
correct name of the extra extended side piece
Brian S. Stephan
2024-03-09 12:49:49 -0600
-
cadf2bf210
add pieces vaguely like the TE1 sides as alternative frame sides
Brian S. Stephan
2024-03-07 19:15:31 -0600
-
0993c0f292
sales pitch (tongue in cheek) preamble in the README
Brian S. Stephan
2024-03-06 14:10:31 -0600
-
954ce38f07
clean up the part descriptions slightly in the README
Brian S. Stephan
2024-03-06 13:31:15 -0600
-
832d5ede8b
update example images in the README
Brian S. Stephan
2024-03-06 13:30:02 -0600
-
341f6cfc6a
add to the complications of the box frame method in the notes
v4.1.0
Brian S. Stephan
2024-03-06 13:02:43 -0600
-
308c21fb61
add more parts notes to the README
Brian S. Stephan
2024-03-06 12:01:26 -0600
-
c7befe0800
update the TODO
Brian S. Stephan
2024-03-06 11:41:50 -0600
-
41bfe3a661
bevel overhang panels in the same way as the frame
Brian S. Stephan
2024-03-06 11:40:10 -0600
-
412e6231d5
better parameterize frame bevel based on frame_bevel_height
Brian S. Stephan
2024-03-06 11:33:09 -0600
-
0ed6b32911
move the "extra lip" to the side pieces instead of the top/bottom
Brian S. Stephan
2024-03-05 14:33:06 -0600
-
155cba6d85
modularize the frame into separate wall pieces
Brian S. Stephan
2024-03-03 18:33:55 -0600
-
0708540ac7
restore the inset tray to the bottom overhang panel
Brian S. Stephan
2024-03-03 14:03:31 -0600
-
4c224b8a60
rename bottom-panel.scad to -inset.scad for clarity's sake
Brian S. Stephan
2024-03-03 13:58:04 -0600
-
e2e6acc0ca
use the same plate with posts for the bottom panel
Brian S. Stephan
2024-03-03 13:55:35 -0600
-
3b886d3994
simplify the interchange hole to make print easier
Brian S. Stephan
2024-03-03 13:46:50 -0600
-
d97f68a5cd
improve the edge (and name) of the frame bevel
Brian S. Stephan
2024-03-01 13:30:58 -0600
-
390df34f2b
frames: re-bevel the bottom and top, center buttons
Brian S. Stephan
2024-03-01 09:36:58 -0600
-
365faebfcb
parameterize frame_mount_column_width
Brian S. Stephan
2024-03-01 07:56:41 -0600
-
da54b160e9
update the reference to IRC in the README
Brian S. Stephan
2024-02-25 00:27:50 -0600
-
4cc110e791
replace the copy of the GPLv3 with one that is formatted better
Brian S. Stephan
2024-02-22 23:27:02 -0600
-
05dab45152
fix the blown up demo and update it for the docs
v4.0.0
Brian S. Stephan
2024-02-22 13:36:46 -0600
-
180b7deb9e
update costs in the README based on new settings
Brian S. Stephan
2024-02-22 13:32:43 -0600
-
8987d403ce
don't build another SCAD file I have locally for tinkering
Brian S. Stephan
2024-02-22 13:09:05 -0600
-
44a238f454
move the lever mount spacer out of the panels, into separate part
Brian S. Stephan
2024-02-20 12:25:14 -0600
-
ed031b9308
create 2mm of additional frame bottom
Brian S. Stephan
2024-02-20 08:07:29 -0600
-
296e6da14b
link to a couple presences in the README
Brian S. Stephan
2024-02-19 23:35:00 -0600
-
c0c9b9e1dc
adjust how the lever mount is aligned to do the chopper right
Brian S. Stephan
2024-02-19 11:14:14 -0600
-
b7af797349
un-inset the bottom panels, the bottom is now flush
Brian S. Stephan
2024-02-19 10:41:59 -0600
-
dd3d77ae90
correct the hole for the panel-to-frame post
Brian S. Stephan
2024-02-19 10:33:16 -0600
-
f90fc095e0
remove the bottom bevel to try to simplify the print
Brian S. Stephan
2024-02-18 12:36:51 -0600
-
f54aa989f7
bevel all the top edges of the frame
Brian S. Stephan
2024-02-18 10:28:10 -0600
-
abc4577173
bevel the bottom of the frame
Brian S. Stephan
2024-02-16 12:25:17 -0600
-
7b2289624e
fix an old math mistake with the spacing of 24mm aux buttons
Brian S. Stephan
2024-02-15 15:25:23 -0600
-
15083f6787
adjust the top panel post holes to fit appropriately
Brian S. Stephan
2024-02-14 14:33:10 -0600
-
a5724209fe
restore space for the hex bolts in the base panel frame posts
Brian S. Stephan
2024-02-14 08:18:48 -0600
-
78a43e41bc
fix imports of the overhang panels following renames
Brian S. Stephan
2024-02-12 20:10:14 -0600
-
370aeb56c6
add posts to the top panels
Brian S. Stephan
2024-02-11 20:10:04 -0600
-
06c27bd4aa
only round the sides, not the top/bottom, of the frame
Brian S. Stephan
2024-02-11 19:02:47 -0600
-
773433cd10
add a chamfer to the frame mount columns
Brian S. Stephan
2024-02-09 18:47:21 -0600
-
bad3c7628f
grow the frame, remove the bottom panel basin
Brian S. Stephan
2024-02-09 15:00:05 -0600
-
6a1e1cc1f3
better component/parameter names to match panel naming
Brian S. Stephan
2024-02-09 14:06:13 -0600
-
861a73708f
better component/parameter names to match panel naming
v3.3.1
Brian S. Stephan
2024-02-09 14:06:13 -0600
-
-
3c8aa4e090
rename overhang panel files for clarity and sorting
Brian S. Stephan
2024-02-06 19:14:24 -0600
-
dac1073aa0
move the bottom plate with overhang into the only part that uses it
Brian S. Stephan
2024-02-06 19:06:37 -0600
-
d3940c4109
s/topplate/panel/ --- just better naming
Brian S. Stephan
2024-02-06 18:57:12 -0600
-
53834363a6
add overhang amount to the chopper, to chop those properly too
Brian S. Stephan
2024-02-06 18:21:24 -0600
-
02993ab6a6
the overhang plates don't need the sunken tray
Brian S. Stephan
2024-02-06 18:12:54 -0600
-
543e31aec7
add an alternative top plate for buttons
v3.3.0
Brian S. Stephan
2024-01-15 22:51:10 -0600
-
438220466d
modularize "directional arc" buttons a bit more
Brian S. Stephan
2024-01-07 16:55:56 -0600
-
97f69b9332
update SPDX headers in source files
Brian S. Stephan
2024-01-02 15:06:19 -0600
-
b653815ef5
leave a TODO note for myself
Brian S. Stephan
2023-12-28 13:54:33 -0600
-
14150a3f04
add DCO and contributing information
Brian S. Stephan
2023-12-18 12:54:53 -0600
-
a0db9d9c3f
add SPDX-License-Identifier: GPL-3.0-or-later to SCAD files
Brian S. Stephan
2023-12-18 12:51:24 -0600
-
abc35affea
add a decorative plate for the neutrik + rocker mounts
Brian S. Stephan
2023-12-14 12:30:09 -0600
-
feebf5a38d
put the rocker mount holes in components, give the plate a better name
Brian S. Stephan
2023-12-13 13:50:24 -0600
-
3ee8745d09
DRY: use neutrik_d_mount in the 24mm mount plate
Brian S. Stephan
2023-12-13 13:40:17 -0600
-
99b03a3b48
parameterize the distance the neutrik holes are from center
Brian S. Stephan
2023-12-13 13:33:14 -0600
-
20373cf856
make the side chopper based on the frame wall parameter
Brian S. Stephan
2023-12-13 09:20:37 -0600
-
36231248b9
new decorative plate for the 3-button aux controls
v3.2.0
Brian S. Stephan
2023-11-26 12:59:54 -0600
-
62c804ed35
group the three 24mm buttons used in frames in one component
Brian S. Stephan
2023-11-25 23:52:20 -0600
-
769f184d1d
update material notes a bit with Hatchbox white
Brian S. Stephan
2023-11-23 20:50:09 -0600
-
f14c80d8a8
bring the frame Z back to 55mm, for taller levers
Brian S. Stephan
2023-11-23 09:32:03 -0600
-
ae40fd7289
break out tweakable parameters into a separate file
Brian S. Stephan
2023-11-20 14:25:27 -0600
-
9a5792580c
add a comment that is all that survived some experimentation
v3.1.1
Brian S. Stephan
2023-11-16 16:48:05 -0600
-
524273369b
correctly refer to the plate overhang as per edge
Brian S. Stephan
2023-11-16 09:02:43 -0600
-
e7a8fc42ed
correctly refer to the frame wall as per edge
Brian S. Stephan
2023-11-16 08:59:06 -0600
-
bac99f6ea8
fix dustwashers by scaling them based on the plate hole
Brian S. Stephan
2023-11-14 23:56:03 -0600
-
6a4980165d
write down a thing to try if I ever get time
v3.1.0
Brian S. Stephan
2023-11-10 15:49:45 -0600
-
7d3b4c0a6c
update notes on bolts/plate heights
Brian S. Stephan
2023-11-10 15:49:26 -0600
-
f2efee40ee
include a finished photo, this time of an inset-based stick
Brian S. Stephan
2023-11-10 15:42:25 -0600
-
53ecd27047
convert decorative plates to scaling the base button rather than adding
Brian S. Stephan
2023-11-09 12:47:05 -0600
-
544f4fb4ce
cleanups to the decorative plates
Brian S. Stephan
2023-11-09 12:29:18 -0600
-
b9d66a4a2f
remove commented out code
Brian S. Stephan
2023-11-09 08:02:47 -0600
-
696697f574
more inset panels, my normal 9+1 buttons
Brian S. Stephan
2023-11-09 07:52:05 -0600
-
d2a1a5be13
scoot the dir arc in and up a bit
Brian S. Stephan
2023-11-08 18:38:06 -0600
-
56f2214339
scoot the button layouts down a bit
Brian S. Stephan
2023-11-08 18:37:02 -0600
-
6fa474b748
update README, need 40mm spacers since chopping the bottom
Brian S. Stephan
2023-11-08 18:14:19 -0600