903b9b40ff
actually update the blown up demo image after fixing the file
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-07-01 20:28:53 -05:00
3059e01b8f
update build blown up demo and example photo
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-06-24 15:50:25 -05:00
bc68f8b0dc
naming consistency: panels are top/bottom
...
vertical planes that make up the frame are either sides or front/back
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-06-21 11:38:31 -05:00
de3914fa85
more documentation updates for the assembly, after renaming stuff
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-06-21 09:07:46 -05:00
92d3f9e6d5
some minor documentation updates
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-06-21 08:44:40 -05:00
01d4d95f24
update the blown up demo, now with frame pieces
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-04-22 12:40:24 -05:00
a7206add7c
updated assembly instructions, simpler without posts
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-04-05 10:25:44 -05:00
0513da125f
don't recommend fiddling with the initial layer height/width
...
doesn't seem to be any real gain in changing them, having done more
prints with those settings and with stock settings.
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-04-04 14:17:34 -05:00
45439cbf6d
things might have actually been warping a bit more with the higher temps
...
at least it's seeming that way with some Bambu matte PLA
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-04-01 16:11:43 -05:00
b21cb75816
add some documentation to the built STLs .zip
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-03-21 19:07:29 -05:00
90f5670c2a
more notes on printing settings for the parts
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-03-21 17:36:03 -05:00
96342f1b16
general assembly instructions
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-03-18 18:15:52 -05:00
7bc6acfb93
updated photo for the README, showing the large bevels
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-03-18 18:15:52 -05:00
16f41fe245
more notes on printing and bottom layer patterns
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-03-18 18:15:48 -05:00
c8881fc172
document observations on printing settings
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-03-16 11:28:25 -05:00
edf5729a85
document a trick for getting panels out in this frictioned world
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-03-14 18:59:27 -05:00
832d5ede8b
update example images in the README
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-03-06 13:30:02 -06:00
05dab45152
fix the blown up demo and update it for the docs
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-02-22 13:40:01 -06:00
769f184d1d
update material notes a bit with Hatchbox white
2023-11-23 20:50:09 -06:00
f2efee40ee
include a finished photo, this time of an inset-based stick
2023-11-10 15:49:14 -06:00
fa1f6927c5
new demo for v3 --- two panels
2023-09-17 11:28:56 -05:00
0611e23975
keep some notes on filament while I'm at it
2023-09-15 15:30:10 -05:00
b911a1b7c1
three section v2 render
2023-09-06 16:24:58 -05:00
f7fa46a074
include an example of what's possible
2023-08-24 23:11:43 -05:00
