c0ae73b139
link to the IRC channel in the README
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-07-13 23:40:04 -05:00
bbe1ab25d7
reorganize the READMEs a bit and put both in the .zip
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-07-07 11:13:03 -05:00
3059e01b8f
update build blown up demo and example photo
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-06-24 15:50:25 -05:00
bc68f8b0dc
naming consistency: panels are top/bottom
...
vertical planes that make up the frame are either sides or front/back
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-06-21 11:38:31 -05:00
92d3f9e6d5
some minor documentation updates
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-06-21 08:44:40 -05:00
8168797be3
rewrite the README notes on parts, now that I reorganized them
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-06-21 08:36:08 -05:00
7bc6acfb93
updated photo for the README, showing the large bevels
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-03-18 18:15:52 -05:00
c8881fc172
document observations on printing settings
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-03-16 11:28:25 -05:00
1f8b5d527b
reorder the attribution section a bit
...
also add a blurb about what I believe satisfies the GPLv3 in any
distribution of the object files and/or objects themselves, since I'm
beginning to think about how to send sticks to other people
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-03-15 09:48:52 -05:00
3a1494c021
s/spacer/standoff/
...
I honestly never remember the difference, but might as well be
consistent
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-03-14 18:52:25 -05:00
0993c0f292
sales pitch (tongue in cheek) preamble in the README
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-03-06 14:11:20 -06:00
954ce38f07
clean up the part descriptions slightly in the README
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-03-06 13:31:15 -06:00
832d5ede8b
update example images in the README
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-03-06 13:30:02 -06:00
341f6cfc6a
add to the complications of the box frame method in the notes
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-03-06 13:02:43 -06:00
308c21fb61
add more parts notes to the README
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-03-06 12:01:26 -06:00
da54b160e9
update the reference to IRC in the README
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-02-25 00:27:50 -06:00
05dab45152
fix the blown up demo and update it for the docs
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-02-22 13:40:01 -06:00
180b7deb9e
update costs in the README based on new settings
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-02-22 13:40:01 -06:00
296e6da14b
link to a couple presences in the README
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-02-19 23:35:26 -06:00
f14c80d8a8
bring the frame Z back to 55mm, for taller levers
...
50mm - 10mm of panels was fine for some levers but not enough for the
LSX-NOBI, which I personally have a number of. I can't vet every lever
in existence, but I know at least that this was a problem that is solved
by adding 5mm, which seems like a fair trade and not a huge difference
in the final product.
this also helps the fact that at 40mm internal, some buttons + wiring
harnesses were getting pretty tight, mostly relevant at the frame
connection point where the inner bottom panel isn't a basin. this should
help that too.
additionally this has us go back to the 45mm M4 standoff recommendation,
which kinda sucks because it seems like 40mm are easier to find, but as
stated in the notes, the difference is somewhat negligible if you just
use 40mm with longer bolts.
2023-11-23 09:32:03 -06:00
7d3b4c0a6c
update notes on bolts/plate heights
2023-11-10 15:49:26 -06:00
f2efee40ee
include a finished photo, this time of an inset-based stick
2023-11-10 15:49:14 -06:00
6fa474b748
update README, need 40mm spacers since chopping the bottom
2023-11-08 18:14:19 -06:00
a960e57bd1
docs updates for v3
2023-09-17 11:33:49 -05:00
0611e23975
keep some notes on filament while I'm at it
2023-09-15 15:30:10 -05:00
87db45df15
complete the cost estimation: total ~$26 for an enclosure
2023-09-15 15:20:17 -05:00
56367369b7
more panel estimates
2023-09-12 20:19:43 -05:00
fa304606df
generalize the top panel cost, they should all come in around this
2023-09-12 17:09:30 -05:00
5d5eb34f8a
top panel cost for something like the lever + dir_arc panel
2023-09-12 13:03:35 -05:00
17ab4815a6
more cost estimate documentation
2023-09-12 10:36:15 -05:00
afd548f8d9
correct hardware notes, since v2 the M4 standoffs are 45mm
2023-09-12 10:14:45 -05:00
e2549694ea
start estimating cost of build
2023-09-12 09:24:33 -05:00
0e00f8d5d1
with the frame redesign, we can use 16mm M4s
2023-09-07 00:19:42 -05:00
b911a1b7c1
three section v2 render
2023-09-06 16:24:58 -05:00
ff19699d61
update TODO and README notes
...
no known issues!
2023-09-06 14:47:14 -05:00
344de2c84f
standalone frame, with tweaks to the frame as a consequence
...
* frame width has been reduced in order to leave more space and have
sunken buttons somewhat accessible
* the cutout for neutrik mounts has been reduced and moved into the
holes themselves, to do this more modularly and restore some support
2023-08-26 21:57:12 -05:00
6ca57615e4
solve for 24mm/30mm snap-ins
2023-08-25 15:36:38 -05:00
f7fa46a074
include an example of what's possible
2023-08-24 23:11:43 -05:00
9f98f0cfa7
rename project before sharing
2023-08-24 22:49:34 -05:00
a3608492fb
considerably more README documentation
2023-08-24 19:51:07 -05:00
144e512433
licensing language tweaks
2023-08-24 15:04:11 -05:00
9aa881be55
README license and attribution information
2023-08-16 08:25:04 -05:00
34234d38ae
Initial commit
2023-08-16 08:05:31 -05:00
