bss/buildable-stick-system
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 11 Wiki Activity

reorganize parameters.scad a bit

Browse Source 
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
This commit is contained in:
Brian S. Stephan 2025-03-05 08:06:32 -06:00
parent a67c3a3d7f
commit 4336098fe8
Signed by: bss
GPG Key ID: 3DE06D3180895FCB
1 changed files with 30 additions and 21 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

51
src/parameters.scad
View File

@ -3,6 +3,10 @@
* SPDX-License-Identifier: GPL-3.0-or-later
*/
// CONNECTION POINT SIZES
// adjustments
hole_tolerance = 0.15;
@ -31,24 +35,34 @@ big_button_radius = 15 + hole_tolerance;
// radius + value below should leave space for the nut and for fingers to grab the nut
button_radius_connector_space = 5;
// standard lever hole
lever_plate_hole = 12;
// neutrik D screw holes
neutrik_d_screw_radius = 1.6 + hole_tolerance;
neutrik_d_radius = 12 + hole_tolerance;
// ELEMENT DIMENSIONS
// JLF mount dimensions
lever_mount_x = 53;
lever_mount_y = 95;
lever_mount_z = 2;
// standard lever hole
lever_plate_hole = 12;
// case dimensions
// base frame box. reminder: top of inside (including mounts) is chopped by panel_z for plates
// base frame box. reminder: inside top and bottom (including mounts) are chopped by panel_z for plates
frame_x = 233;
frame_y = 208;
frame_z = 57;
// stand dimensions to display a stick
stand_x = 5;
stand_y = frame_z;
stand_z = 15;
// depth of the "lip" of the frame that the top plate sets into/supports the overhang
frame_wall = 4;
// top plate, which can either be the whole plate ("inset") or the mounting frame for a plate that overhangs
panel_x = frame_x - (frame_wall * 2);
panel_y = frame_y - (frame_wall * 2);
panel_z = 5;
// degree to which the extended frame pieces stick out from the end of the frame
frame_extension_x = 25;
@ -61,20 +75,12 @@ overhang_panel_bevel_height = 1;
frame_center_to_neutrik = 70;
// depth of the "lip" of the frame that the top plate sets into/supports the overhang
frame_wall = 4;
// width of the column in the frame corners to support the hex bolt
frame_mount_column_width = 20;
// per neutrik (mm)
neutrik_panel_thickness = 3;
// top plate, which can either be the whole plate ("inset") or the mounting frame for a plate that overhangs
panel_x = frame_x - (frame_wall * 2);
panel_y = frame_y - (frame_wall * 2);
panel_z = 5;
// inside the frame
inner_frame_z = frame_z - (panel_z * 2);
@ -96,10 +102,6 @@ panel_to_frame_point_y = (panel_y/2)-10;
// frame interior that supports the top plates
panel_support_width = 5;
// neutrik D screw holes
neutrik_d_screw_radius = 1.6 + hole_tolerance;
neutrik_d_radius = 12 + hole_tolerance;
// additional button radius for decorative panels, etc.
decorative_radius_scale = 1.75;
jumbo_decorative_radius_scale = 2;
@ -113,8 +115,15 @@ slash_inner_displacement = 10;
slash_width = 15;
slash_height = frame_z-panel_z*3;
// stand dimensions to display a stick
stand_x = 5;
stand_y = frame_z;
stand_z = 15;
// LAYOUTS
sega_2p_column_2_offset = 30.5;
sega_2p_column_3_offset = sega_2p_column_2_offset + 36;
sega_2p_column_4_offset = sega_2p_column_3_offset + 36;