ba3e77d0cd
explain more about printing the parts, esp. patterns
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-07-13 23:41:12 -05:00
0513da125f
don't recommend fiddling with the initial layer height/width
...
doesn't seem to be any real gain in changing them, having done more
prints with those settings and with stock settings.
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-04-04 14:17:34 -05:00
45439cbf6d
things might have actually been warping a bit more with the higher temps
...
at least it's seeming that way with some Bambu matte PLA
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-04-01 16:11:43 -05:00
90f5670c2a
more notes on printing settings for the parts
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-03-21 17:36:03 -05:00
16f41fe245
more notes on printing and bottom layer patterns
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-03-18 18:15:48 -05:00
c8881fc172
document observations on printing settings
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-03-16 11:28:25 -05:00
