changelog for v4.7.0

Signed-off-by: Brian S. Stephan <bss@incorporeal.org>

.gitignore

@@ -1,3 +1,4 @@
 build/
+*.stl
 
 *.sw*

CHANGELOG.md

@@ -2,6 +2,84 @@
 
 Included is a summary of changes to the project, by version. Details can be found in the commit history.
 
+## v4.7.0
+
+### Features
+
+* Inner wall pieces where the horizontal stripes jut through the horizontal stripe windows have been added, these look
+  decent and avoid the outer wall feeling extremely flimsy. This piece uses a "longish" front/back piece which isn't
+  retained as a separate piece, because the latter is not meant to be printed itself.
+* I somehow went this whole time without creating a simple Sega 2P layout panel and decorative plate; those have been
+  added.
+* Prototype (still literally a bit rough) braces for the corners and middle have been added. These pieces cover up the
+  seams of the frame, and add some visual depth and distinction, but are not for everyone. YMMV.
+* A new "superplate" of the "directional arc + W" plus "sega 2P nine" layouts combined has been added, this is a piece I
+  ended up not using in a build, but it functions as well as any of the plates, so why not.
+
+### Improvements
+
+* Visible round edges have been made more round.
+* The single-24mm-button decorative disc has been shrunk a bit, since (IMO) it stood out a bit too much relative to the
+  button.
+* The "longish" extended side has been made a bit simpler to construct.
+* The side piece construction has been reworked, making it a bit simpler to construct and reducing the build complexity,
+  though preview mode still complains about 2-manifold errors.
+* The assembly documentation has been cleaned up, with more pieces explained a bit better as well.
+* Dustwashers got some small updates to shrink the size of the disc to the normal JLF dustwasher size, and to fit the
+  shaft a bit tighter without obstructing the lever's ability to... be a lever.
+
+### Miscellaneous
+
+* The build has been improved to error when there are issues in the .scad files, to keep me from making bad packages.
+* The back pieces are aligned properly in the all together demo.
+* Updates to the docs on my preferred printing settings.
+* README updates following the previous releases' reorganizations.
+* Objects README update to add attribution to TheTrain.
+
+## v4.6.0
+
+### Features
+
+* All frame pieces were updated to have flush edges, a la the "extended" sides, rather than the seam between the
+  front/back and the sides being at a 45 degree angle on some pieces, with the latter meaning that we were maintaining
+  two (complicated) duplicates of the same pieces because both 45 degree and 90 degree angles were necessary. This does
+  not affect the look of the build much, but simplifies the print and the maintenance of the project.
+* A slightly-extended flat side piece was added, to add just a bit of length to the overall build.
+
+### Improvements
+
+* One more slash has been added to the frame pieces, just for more interesting visuals.
+* The rectangle plates' positioning was tweaked slightly.
+
+### Fixes
+
+* The frame solid was very slightly shorter than it should have been as the corners relied on cylinders. The core solid
+  is now at its proper dimensions.
+
+## v4.5.0
+
+### Features
+
+* Many components for the Buildable Stick System - Arcade Edition --- pieces to create a control enclosure for the Qanba
+  2009 base! These pieces live in `extras/bss-ae/` but do use some parts from the base project; check that subdir's
+  README.
+* Created a Sega 2P 11 button layout, basically following the curve of the fourth column and adding a fifth, plus one
+  extra button
+* More decorative plates, this time square ones for an NES-styled project.
+
+### Improvements
+
+* Button layout positions for Sega 2P and directional arc layouts have been parameterized.
+* The decorative plates for the directional arc + W and Sega 2P 9 layout have been split into two files, since there was
+  no reason to keep them as one with multiple pieces anymore.
+* Tweaks to the horizontal stripes in order to get them to print better.
+* Renamed "Sega 2P plus one" to Sega 2P 9, following the pattern of the 11 layout.
+
+### Miscellaneous
+
+* Renaming of extended side pieces to fit the front/back idiom.
+* Cleanups to the demos.
+
 ## v4.4.3
 
 ### Features

README.md

@@ -40,21 +40,17 @@ about what the types of parts are and how to use them:
       larger arcade sticks. They are simple to assemble, but you have fewer modularity/customization options, and they
       are harder to print because the physics of the material cooling will probably pull the corners up. They also need
       supports, since the top and bottom of the frame both have trays for panels to go into. Use at your own risk.
-    * `pieces/`
+    * `pieces/` these are the same four walls (generally speaking) as in the complete frames above, broken out into
-        * `box/` --- these are the same four walls (generally speaking) as in the complete frames above, broken out into
+      modular pieces to print separately. Because they are separate pieces, you can mix and match colors, and you can
-          modular pieces to print separately. Because they are separate pieces, you can mix and match colors, and you
+      lay them all face down on the print surface for better adhesion and surface patterns. There are also variants
-          can lay them all face down on the print surface for better adhesion and surface patterns. There are also
+      here, the "windowed" pieces, for doing two-tone variants and that kind of thing. There are also frame walls pulled
-          variants here, the "windowed" pieces, for doing two-tone variants and that kind of thing.
+      out to create MCZ TE-style extended sides. There is an interconnect that stands in for the joined inner wall
-        * `extended/` --- the frame walls are pulled out to create MCZ TE-style extended sides. Rather than getting a
+      between boxes of the overall unit. You need this if you are combining multiple sets of walls, e.g. for a
-          box look, you get a longer slab with nice bevels. These look nice, but slightly fiddily to print (and of
+      two-panel-long stick.
-          course need more material) --- watch your surface adhesion.
-        * `interconnect` --- complete frames are bolted to one another, but for frame pieces, there is an interconnect
-          that stands in for the joined inner wall. You need this if you are combining multiple sets of walls, e.g. for
-          a two-panel-long stick.
 * `panels/`
     * `inset/` --- various panels, all of the same size, that fit into and flush with the frame, making the arcade stick
-      top or bottom. These work equally well with box or extended frames, and aside from using up a bit of the space
+      top or bottom. Aside from using up a bit of the space for components inside the frame, come with no downsides ---
-      inside the frame, come with no downsides --- they print easily and are a pretty simple shape to tweak and remix.
+      they print easily and are a pretty simple shape to tweak and remix.
     * `overhang/` --- overhang panels have their plane extending over the edge of the frame, creating a bit of a
       sandwich look. This is mostly an aesthetic choice, but they sit higher in the frame as well, the main panel being
       over/under the frame rather than within it. This extra space is useful for taller levers. The only downside to
@@ -69,6 +65,8 @@ about what the types of parts are and how to use them:
 * `extras/`
     * Various experiments and things not directly related to making an arcade stick. At time of writing, there's a
       couple pieces for a little stand for the stick, solely for vanity purposes.
+        * `bss-ae/` --- these are pieces for an arcade control panel that fits on the Qanba 2009. See the docs in that
+          directory for details.
 
 Feel free to request or contribute to more objects. Additional documentation regarding assembling the stick is available
 in `docs/assembly-and-tips.md`.
@@ -76,7 +74,7 @@ in `docs/assembly-and-tips.md`.
 ## Printing
 
 These items all fit on a 256mm^2 print bed; I use a Bambu Lab P1P based on what I've learned from the
-OpenStickCommunity. Standard settings seem sufficiently sturdy, but see `docs/materials-and-printing.md` for more
+OpenStickCommunity. Standard settings seem sufficiently sturdy, but see `docs/printing-and-materials.md` for more
 thoughts and settings based on my tinkering with prints.
 
 ## Assembling

build.py

@@ -42,9 +42,11 @@ for root, dirs, files in os.walk('.'):
         stl_file = re.sub(r'\.scad$', '.stl', file)
         input_ = os.path.join(input_dir, file)
         output = os.path.join(output_dir, stl_file)
-        cmd = f'openscad -o {output} {input_}'
+        cmd = f'openscad --hardwarnings -o {output} {input_}'
         print(cmd)
         processes.append(subprocess.Popen(cmd.split(' ')))
 
 for process in processes:
     process.wait()
+    if process.returncode != 0:
+        raise Exception(f"building {process.args} failed")

demo/all-together-demo-extended-with-windows.scad

@@ -5,15 +5,13 @@
 
 include <parameters.scad>
 include <components.scad>
-use <frames/pieces/extended/front-or-back.scad>
+use <frames/pieces/side-trapezoid.scad>
-use <frames/pieces/extended/side.scad>
+use <frames/pieces/front-or-back-aux-and-neutrik.scad>
-use <frames/pieces/extended/front-or-back-clean-for-extended-side-aux-and-neutrik.scad>
+use <frames/pieces/front-or-back-windowed-horiz-stripes.scad>
-use <frames/pieces/extended/front-or-back-clean-for-extended-side-windowed-horiz-stripes.scad>
 use <panels/inset/lever-and-dir_arc-plus-w-30mm-panel.scad>
-use <panels/inset/sega-2p-plus-one-plus-control-panel-with-mount.scad>
+use <panels/inset/sega-2p-nine-plus-control-panel-with-mount.scad>
 use <misc/decorative-plate-24mm-button.scad>
-use <misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one.scad>
+use <misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-nine.scad>
-use <misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one-plates.scad>
 use <misc/dustwasher-lsx-nobi.scad>
 
 top_panel_color        = "#5B6579";
@@ -23,17 +21,17 @@ frame_side_color       = "#8E9089";
 top_deco_color         = "#8E9089";
 
 color(top_panel_color) translate([-panel_x/2, 0, frame_z/2-panel_z+0.01]) lever_and_dir_arc_w_30mm_panel();
-color(top_panel_color) translate([panel_x/2, 0, frame_z/2-panel_z+0.01]) sega_2p_plus_one_plus_control_panel_with_mount();
+color(top_panel_color) translate([panel_x/2, 0, frame_z/2-panel_z+0.01]) sega_2p_nine_plus_control_panel_with_mount();
-color(frame_side_color) translate([-frame_x/2+4, 0, -2.5]) extended_left_or_right_frame_piece();
+color(frame_side_color) translate([-frame_x/2+4, 0, -2.5]) side_trapezoid_frame_piece();
-color(frame_side_color) translate([frame_x/2-4, 0, -2.5]) mirror([1, 0, 0]) extended_left_or_right_frame_piece();
+color(frame_side_color) translate([frame_x/2-4, 0, -2.5]) mirror([1, 0, 0]) side_trapezoid_frame_piece();
-color(frame_top_bottom_color) translate([-frame_x/2+4, 0, -2.5])  horiz_striped_windowed_front_or_back_box_frame_piece_for_extended_side();
+color(frame_top_bottom_color) translate([-frame_x/2+4, 0, -2.5])  horiz_striped_windowed_front_or_back_frame_piece();
-color(frame_top_bottom_color) translate([frame_x/2-4, 0, -2.5])  horiz_striped_windowed_front_or_back_box_frame_piece_for_extended_side();
+color(frame_top_bottom_color) translate([frame_x/2-4, 0, -2.5])  horiz_striped_windowed_front_or_back_frame_piece();
-color(frame_top_bottom_color) translate([-frame_x/2+4, 0, -2.5]) rotate([180, 0, 0]) front_or_back_aux_and_neutrik_box_frame_piece_for_extended_side();
+color(frame_top_bottom_color) translate([-frame_x/2+4, 0, -2.5]) rotate([180, 0, 0]) front_or_back_aux_and_neutrik_frame_piece();
-color(frame_top_bottom_color) translate([frame_x/2-4, 0, -2.5]) rotate([180, 180, 0]) front_or_back_aux_and_neutrik_box_frame_piece_for_extended_side();
+color(frame_top_bottom_color) translate([frame_x/2-4, 0, -2.5]) rotate([180, 180, 0]) front_or_back_aux_and_neutrik_frame_piece();
 color(bottom_panel_color) translate([-panel_x/2, 0, -5-frame_z/2+5]) panel();
 color(bottom_panel_color) translate([panel_x/2, 0, -5-frame_z/2+5]) panel();
 
-/* color(top_deco_color) translate([0, 0, 3+frame_z/2-4]) dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate_of_plates(); */
+/* color(top_deco_color) translate([0, 0, 3+frame_z/2-4]) dir_arc_plus_w_30mm_and_sega_2p_nine_decorative_plate_of_plates(); */
-color(top_deco_color) translate([0, 0, 3+frame_z/2-panel_z]) dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate();
+color(top_deco_color) translate([0, 0, 3+frame_z/2-panel_z]) dir_arc_plus_w_30mm_and_sega_2p_nine_decorative_plate();
 color(top_deco_color) translate([-170, 20, 3+frame_z/2-panel_z]) lsx_nobi_dustwasher();
 color(top_deco_color) translate([panel_x-24, 30, 3+frame_z/2-panel_z]) button_24mm_decorative_plate();

demo/all-together-demo-extended.scad

@@ -5,14 +5,13 @@
 
 include <parameters.scad>
 include <components.scad>
-use <frames/pieces/extended/front-or-back.scad>
+use <frames/pieces/front-or-back-trapezoid.scad>
-use <frames/pieces/extended/side-extended-to-bottom.scad>
+use <frames/pieces/side-trapezoid-extended-to-front-trapezoid.scad>
-use <frames/pieces/extended/front-or-back-clean-for-extended-side-aux-and-neutrik.scad>
+use <frames/pieces/front-or-back-aux-and-neutrik.scad>
 use <panels/inset/lever-and-dir_arc-plus-w-30mm-panel.scad>
-use <panels/inset/sega-2p-plus-one-plus-control-panel-with-mount.scad>
+use <panels/inset/sega-2p-nine-plus-control-panel-with-mount.scad>
 use <misc/decorative-plate-24mm-button.scad>
-use <misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one.scad>
+use <misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-nine.scad>
-use <misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one-plates.scad>
 use <misc/dustwasher-lsx-nobi.scad>
 
 top_panel_color        = "#5B6579";
@@ -22,17 +21,16 @@ frame_side_color       = "#8E9089";
 top_deco_color         = "#8E9089";
 
 color(top_panel_color) translate([-panel_x/2, 0, frame_z/2-panel_z+0.01]) lever_and_dir_arc_w_30mm_panel();
-color(top_panel_color) translate([panel_x/2, 0, frame_z/2-panel_z+0.01]) sega_2p_plus_one_plus_control_panel_with_mount();
+color(top_panel_color) translate([panel_x/2, 0, frame_z/2-panel_z+0.01]) sega_2p_nine_plus_control_panel_with_mount();
-color(frame_side_color) translate([-frame_x/2+4, 0, -2.5]) extra_extended_left_or_right_frame_piece();
+color(frame_side_color) translate([-frame_x/2+4, 0, -2.5]) side_trapezoid_extended_to_front_frame_piece();
-color(frame_side_color) translate([frame_x/2-4, 0, -2.5]) mirror([1, 0, 0]) extra_extended_left_or_right_frame_piece();
+color(frame_side_color) translate([frame_x/2-4, 0, -2.5]) mirror([1, 0, 0]) side_trapezoid_extended_to_front_frame_piece();
-color(frame_top_bottom_color) translate([-frame_x/2+4, 0, -2.5])  extended_front_or_back_frame_piece();
+color(frame_top_bottom_color) translate([-frame_x/2+4, 0, -2.5])  front_or_back_trapezoid_frame_piece();
-color(frame_top_bottom_color) translate([frame_x/2-4, 0, -2.5])  extended_front_or_back_frame_piece();
+color(frame_top_bottom_color) translate([frame_x/2-4, 0, -2.5])  front_or_back_trapezoid_frame_piece();
-color(frame_top_bottom_color) translate([-frame_x/2+4, 0, -2.5]) rotate([180, 0, 0]) front_or_back_aux_and_neutrik_box_frame_piece_for_extended_side();
+color(frame_top_bottom_color) translate([-frame_x/2+4, 0, -2.5]) rotate([180, 0, 0]) front_or_back_aux_and_neutrik_frame_piece();
-color(frame_top_bottom_color) translate([frame_x/2-4, 0, -2.5]) rotate([180, 180, 0]) front_or_back_aux_and_neutrik_box_frame_piece_for_extended_side();
+color(frame_top_bottom_color) translate([frame_x/2-4, 0, -2.5]) rotate([180, 180, 0]) front_or_back_aux_and_neutrik_frame_piece();
 color(bottom_panel_color) translate([-panel_x/2, 0, -5-frame_z/2+5]) panel();
 color(bottom_panel_color) translate([panel_x/2, 0, -5-frame_z/2+5]) panel();
 
-/* color(top_deco_color) translate([0, 0, 3+frame_z/2-4]) dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate_of_plates(); */
+color(top_deco_color) translate([0, 0, 3+frame_z/2-panel_z]) dir_arc_plus_w_30mm_and_sega_2p_nine_decorative_plate();
-color(top_deco_color) translate([0, 0, 3+frame_z/2-panel_z]) dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate();
 color(top_deco_color) translate([-170, 20, 3+frame_z/2-panel_z]) lsx_nobi_dustwasher();
 color(top_deco_color) translate([panel_x-24, 30, 3+frame_z/2-panel_z]) button_24mm_decorative_plate();

demo/all-together-demo-solo.scad

@@ -5,9 +5,9 @@
 
 include <parameters.scad>
 include <components.scad>
-use <frames/pieces/extended/front-or-back.scad>
+use <frames/pieces/front-or-back-trapezoid.scad>
-use <frames/pieces/extended/side-extended-to-bottom.scad>
+use <frames/pieces/side-trapezoid-extended-to-front-trapezoid.scad>
-use <frames/pieces/extended/front-or-back-clean-for-extended-side-aux-and-neutrik.scad>
+use <frames/pieces/front-or-back-aux-and-neutrik.scad>
 use <panels/inset/lever-and-dir_arc-plus-w-30mm-panel.scad>
 use <panels/inset/lever-and-sega-2p-6-button-panel-with-aux-with-mount.scad>
 use <misc/dustwasher-jlf.scad>
@@ -19,10 +19,10 @@ frame_side_color       = "#8E9089";
 top_deco_color         = "#000000";
 
 color(top_panel_color) translate([0, 0, frame_z/2-panel_z+0.01]) lever_and_sega_2p_6_button_panel_with_aux_with_mount();
-color(frame_side_color) translate([0, 0, -2.5]) extra_extended_left_or_right_frame_piece();
+color(frame_side_color) translate([0, 0, -2.5]) side_trapezoid_extended_to_front_frame_piece();
-color(frame_side_color) translate([0, 0, -2.5]) mirror([1, 0, 0]) extra_extended_left_or_right_frame_piece();
+color(frame_side_color) translate([0, 0, -2.5]) mirror([1, 0, 0]) side_trapezoid_extended_to_front_frame_piece();
-color(frame_top_bottom_color) translate([0, 0, -2.5])  extended_front_or_back_frame_piece();
+color(frame_top_bottom_color) translate([0, 0, -2.5])  front_or_back_trapezoid_frame_piece();
-color(frame_top_bottom_color) translate([0, 0, -2.5]) rotate([180, 0, 0]) front_or_back_aux_and_neutrik_box_frame_piece_for_extended_side();
+color(frame_top_bottom_color) translate([0, 0, -2.5]) rotate([180, 0, 0]) front_or_back_aux_and_neutrik_frame_piece();
 color(bottom_panel_color) translate([0, 0, -5-frame_z/2+5]) panel();
 
 color(top_deco_color) translate([-65, 5, 3+frame_z/2-panel_z]) jlf_dustwasher();

demo/all-together-demo.scad

@@ -5,31 +5,37 @@
 
 include <parameters.scad>
 include <components.scad>
-use <frames/complete/left-frame.scad>
+use <frames/pieces/side.scad>
-use <frames/pieces/box/side.scad>
+use <frames/pieces/front-or-back.scad>
-use <frames/pieces/box/front-or-back.scad>
+use <frames/pieces/front-or-back-aux-and-neutrik.scad>
-use <frames/pieces/box/front-or-back-aux-and-neutrik.scad>
 use <panels/inset/lever-and-dir_arc-plus-w-30mm-panel.scad>
-use <panels/inset/sega-2p-plus-one-plus-control-panel-with-mount.scad>
+use <panels/inset/sega-2p-nine-plus-control-panel-with-mount.scad>
 use <misc/decorative-plate-24mm-button.scad>
-use <misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one.scad>
+use <misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-nine.scad>
-use <misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one-plates.scad>
 use <misc/dustwasher-lsx-nobi.scad>
+use <misc/decorative-corner.scad>
 
 panel_color    = "red";
 base_color     = "gray";
 top_deco_color = "white";
+brace_color    = "gray";
 
-color(panel_color) translate([-panel_x/2, 0, frame_z/2-panel_z+0.01]) lever_and_dir_arc_w_30mm_panel();
+color(panel_color) translate([-panel_x/2, 0, frame_z/2-panel_z/2+0.001]) lever_and_dir_arc_w_30mm_panel();
-color(panel_color) translate([panel_x/2, 0, frame_z/2-panel_z+0.01]) sega_2p_plus_one_plus_control_panel_with_mount();
+color(panel_color) translate([panel_x/2, 0, frame_z/2-panel_z/2+0.001]) sega_2p_nine_plus_control_panel_with_mount();
-color(base_color) translate([-frame_x/2+5, 0, -2.5]) left_frame();
+color(base_color) translate([panel_x/2, 0, 0]) rotate([0, 180, 0]) side_frame_piece();
-color(base_color) translate([panel_x/2, 0, -2.5]) rotate([0, 180, 0]) side_box_frame_piece();
+color(base_color) translate([-panel_x/2, 0, 0]) side_frame_piece();
-color(base_color) translate([panel_x/2, 0, -2.5]) front_or_back_box_frame_piece();
+color(base_color) translate([panel_x/2, 0, 0]) front_or_back_frame_piece();
-color(base_color) translate([panel_x/2, 0, -2.5]) rotate([180, 180, 0]) front_or_back_aux_and_neutrik_box_frame_piece();
+color(base_color) translate([-panel_x/2, 0, 0]) front_or_back_frame_piece();
-color(base_color) translate([-panel_x/2, 0, -5-frame_z/2+5]) panel();
+color(base_color) translate([panel_x/2, 0, 0]) rotate([180, 180, 0]) front_or_back_aux_and_neutrik_frame_piece();
-color(base_color) translate([panel_x/2, 0, -5-frame_z/2+5]) panel();
+color(base_color) translate([-panel_x/2, 0, 0]) rotate([180, 0, 0]) front_or_back_aux_and_neutrik_frame_piece();
+color(base_color) translate([-panel_x/2, 0, -frame_z/2+panel_z/2]) panel();
+color(base_color) translate([panel_x/2, 0, -frame_z/2+panel_z/2]) panel();
 
-/* color(top_deco_color) translate([0, 0, 3+frame_z/2-4]) dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate_of_plates(); */
+color(brace_color) translate([-panel_x/2, 0, 0]) decorative_corner();
-color(top_deco_color) translate([0, 0, 3+frame_z/2-panel_z]) dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate();
+color(brace_color) mirror([1, 0, 0]) translate([-panel_x/2, 0, 0]) decorative_corner();
-color(top_deco_color) translate([-170, 20, 3+frame_z/2-panel_z]) lsx_nobi_dustwasher();
+color(brace_color) mirror([0, 1, 0]) translate([-panel_x/2, 0, 0]) decorative_corner();
-color(top_deco_color) translate([panel_x-24, 30, 3+frame_z/2-panel_z]) button_24mm_decorative_plate();
+color(brace_color) mirror([1, 0, 0]) mirror([0, 1, 0]) translate([-panel_x/2, 0, 0]) decorative_corner();
+
+color(top_deco_color) translate([0, 0, 4+frame_z/2-panel_z/2+0.001]) dir_arc_plus_w_30mm_and_sega_2p_nine_decorative_plate();
+color(top_deco_color) translate([-170, 20, 4+frame_z/2-panel_z/2+0.001]) lsx_nobi_dustwasher();
+color(top_deco_color) translate([panel_x-24, 30, 4+frame_z/2-panel_z/2+0.001]) button_24mm_decorative_plate();

demo/blown-up-demo.scad

@@ -6,29 +6,29 @@
 include <parameters.scad>
 include <components.scad>
 use <frames/pieces/interconnect.scad>
-use <frames/pieces/box/side.scad>
+use <frames/pieces/side.scad>
-use <frames/pieces/box/front-or-back.scad>
+use <frames/pieces/front-or-back.scad>
-use <frames/pieces/box/front-or-back-aux-and-neutrik.scad>
+use <frames/pieces/front-or-back-aux-and-neutrik.scad>
 use <panels/overhang/left-lever-and-dir_arc-plus-w-30mm-panel.scad>
-use <panels/overhang/right-sega-2p-plus-one-plus-control-panel-with-mount.scad>
+use <panels/overhang/right-sega-2p-nine-plus-control-panel-with-mount.scad>
 use <panels/overhang/left-or-right-panel.scad>
 use <misc/decorative-plate-24mm-button.scad>
-use <misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one.scad>
+use <misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-nine.scad>
 use <misc/dustwasher-lsx-nobi.scad>
 
 color("#C12E1F") translate([-panel_x/2-25, 0, frame_z/2+75]) lever_and_dir_arc_w_30mm_left_overhang_panel();
-color("#C12E1F") translate([panel_x/2+25, 0, frame_z/2+75]) sega_2p_plus_one_plus_control_right_overhang_panel_with_mount();
+color("#C12E1F") translate([panel_x/2+25, 0, frame_z/2+75]) sega_2p_nine_plus_control_right_overhang_panel_with_mount();
-color("black") translate([-frame_x/2+5-25, -55, -2.5]) front_or_back_box_frame_piece();
+color("black") translate([-frame_x/2+5-25, -55, -2.5]) front_or_back_frame_piece();
-color("black") rotate([0, 180, 0]) translate([-frame_x/2+5-25, -55, -2.5]) front_or_back_box_frame_piece();
+color("black") rotate([0, 180, 0]) translate([-frame_x/2+5-25, -55, -2.5]) front_or_back_frame_piece();
-color("black") translate([-frame_x/2+5-50, 0, -2.5]) side_box_frame_piece();
+color("black") translate([-frame_x/2+5-50, 0, -2.5]) side_frame_piece();
-color("black") rotate([0, 180, 0]) translate([-frame_x/2+5-50, 0, -2.5]) side_box_frame_piece();
+color("black") rotate([0, 180, 0]) translate([-frame_x/2+5-50, 0, -2.5]) side_frame_piece();
-color("black") rotate([180, 0, 0]) translate([-frame_x/2+5-25, -55, -2.5]) front_or_back_aux_and_neutrik_box_frame_piece();
+color("black") rotate([180, 0, 0]) translate([-frame_x/2+5-25, -55, -2.5]) front_or_back_aux_and_neutrik_frame_piece();
-color("black") rotate([180, 0, 0]) rotate([0, 180, 0]) translate([-frame_x/2+5-25, -55, -2.5]) front_or_back_aux_and_neutrik_box_frame_piece();
+color("black") rotate([180, 0, 0]) rotate([0, 180, 0]) translate([-frame_x/2+5-25, -55, -2.5]) front_or_back_aux_and_neutrik_frame_piece();
 color("black") rotate([0, 180, 0]) interconnect_frame_piece();
 color("#C12E1F") translate([-panel_x/2-25, 0, -5-frame_z/2-75]) left_or_right_overhang_panel();
 color("#C12E1F") mirror([0, 1, 0]) translate([panel_x/2+25, 0, -5-frame_z/2-75]) rotate([0, 0, 180])
 	left_or_right_overhang_panel();
 
-color("black") translate([0, 0, 3+frame_z/2+150]) dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate();
+color("black") translate([0, 0, 3+frame_z/2+150]) dir_arc_plus_w_30mm_and_sega_2p_nine_decorative_plate();
 color("black") translate([-195, 25, 3+frame_z/2+150]) lsx_nobi_dustwasher();
 color("black") translate([panel_x, 25, 3+frame_z/2+150]) button_24mm_decorative_plate();

docs/README-objects.md

@@ -28,6 +28,15 @@ details.
 You should have received a copy of the GNU General Public License along with the Buildable Stick System. If not, see
 <https://www.gnu.org/licenses/>.
 
+### Lineage
+
+Inspired by the incredible work of [TheTrain](https://github.com/TheTrainGoes) on the [OpenStickCommunity Fightstick
+Case](https://github.com/OpenStickCommunity/Hardware/tree/main/Fightstick%20Case), itself based on the incredible work
+by [Dash n'Mash](https://twitter.com/Dash_xx_Mash?s=20). Original work Copyright 2023 TheTrain, [licensed under CC BY
+4.0](https://creativecommons.org/licenses/by/4.0/).
+
+Made possible by the amazing efforts of [slagcoin](https://www.slagcoin.com/).
+
 ### Distributing BSS Sticks
 
 Under the terms of the GPLv3, you must inform the receiver of the "object code" of their rights under the GPLv3. This is

docs/assembly-and-tips.md

@@ -1,12 +1,48 @@
 # Assembly and Tips
 
-Just some miscellaneous notes for any dear reader, or more likely, my own forgetful self.
+These are the parts you need and instructions for creating a simple two panel arcade stick. The end product is a
+rectangular prism roughly 18" long, with ample space for back buttons and enough top panel space for almost any layout
+you can imagine. There are more pieces and designs to experiment with, but this will get you an awesome "standard"
+build.
+
+## Parts for a Basic Enclosure
+
+The pieces you need to print (all colors to your taste):
+
+* **The base frame:** `frame/pieces/front-or-back.stl` x2 + `frame/pieces/front-or-back-aux-and-neutrik.stl` x2 +
+  `frame/pieces/interconnect.stl`. This creates a large "H" with six 24mm button holes and two Neutrik D holes on the
+  back, which can mount USB connectors or rocker switches, or be covered if not used. All four of the front or back
+  pieces connect to the interconnect piece, which creates one frame out of the individual pieces, and also adds some
+  support to the center of the enclosure. The interconnect has a large hole that can either make wire routing easier, or
+  leave space in the center for button layouts that span it.
+* **The frame sides:** `frame/pieces/side.stl` x2. These cap the "H", completing the overall frame.
+* **The top:** `panels/inset/[LAYOUTS].stl`. These panels go on the top of the frame and are where you mount all of your
+  main buttons and levers and whatnot. There are a couple layouts whose panels are meant to be paired (e.g.
+  `shiokenstar-left-panel.stl` and `shiokenstar-right-panel.stl`), but usually you simply pick a left panel (e.g.
+  `lever-panel-with-mount.stl`) and right panel (e.g. `sega-2p-panel.stl`) based on what you want. Note that one of your
+  choices should be "with mount", which is where the usually-sized PCB will screw into inside the box.
+* **The bottom:** `panels/inset/panel.stl` x2. Other than being the color of your choice, these just close the box.
+  You could put foam pads or something on these if you wanted.
+
+The above gets you the basics. Some common things you may also want:
+
+* **Mounting Neutrik connectors:** Neutrik D connectors can mount flush to the inside of the frame, but you can choose
+  to have a little decorative plate (`misc/neutrik-d-plate.stl` for added depth or color choices on the outside of the
+  frame, if you'd like.
+* **Mounting a 24mm switch:** a rocker switch can also be mounted in the Neutrik D connector, but it needs to be placed
+  into a `misc/neutrik-d-plate-24mm-hole.stl` plate, and the plate mounted to the frame.
+* **Flair for the auxillary buttons:** the three buttons in a row on the back of the frame can also get some style, just
+  place a `misc/decorative-plate-aux-control-three-button-cluster.stl` between the buttons and the frame. This only
+  works for screw-in buttons.
+* **Flair for the top buttons:** same as above, a decorative plate for top panel layouts --- e.g.
+  `misc/decorative-plate-sega-2p.stl` --- can be sandwiched between the buttons and panel to add some style. This also
+  only tends to work on screw-in buttons.
+* **Dustwashers/flair:** same deal, if you want to print one, use e.g. `misc/dustwasher-jlf.stl`.
 
 ## Putting a BSS Stick Together
 
 Assembly of a stick is pretty straightforward, but there are some choices that can make it easier or harder. The
-following is the most consistent way I've found to put one together. This is assuming a v4.2 or beyond stick, with two
+following is the most consistent way I've found to put one together.
-panels to make a long standard stick, and the frame made of pieces.
 
 1. Prepare the frame pieces: this is your best shot to get the e.g. Neutrik plates for the USB mount, SPDT switches, etc.
    installed, so do it now, and give them a good tighten. You shouldn't need to adjust these again, so finish their
@@ -34,19 +70,3 @@ panels to make a long standard stick, and the frame made of pieces.
 
 In the end, this should be extremely sturdy. None of the frame or panels should be loose at all, and you should be able
 to move, flip, gently toss, etc. the stick without anything moving or feeling loose.
-
-## Removing Inset Panels
-
-As of v4.1 (or in v3), the top and bottom inset panels both insert into the frame, inside the frame "lip", meaning that
-when everything is put together, they create a flush surface (more or less). This can make them hard to get out, as you
-can't grab anything to get any leverage, and especially with v4.1, the plastic posts to aid the friction fit make it
-even harder to muscle out --- in fact, even if you could get an edge and start yanking, you'd probably just break some
-of the plastic.
-
-You can instead use the reverse side and the hex standoffs to push a panel out, as so:
-
-1. Loosen, or completely remove, the hex bolts for the panel you would like to remove.
-2. Flip the stick over, and remove the hex bolts on the opposite side.
-3. Screw in longer bolts, or anything else that'll fit into the hole without going flush against the panel.
-4. Push the long bolts in, thus pushing the standoffs, thus pushing the desired panel out from within.
-5. You may have to even get a mallet and tap on a bolt, occasionally, as everything can be *pretty* tight.

docs/printing-and-materials.md

@@ -4,7 +4,7 @@ bss's random thoughts and notes on the actual printing of the Buildable Stick Sy
 
 ## Printing Settings
 
-My preferred settings are 3 wall loops with 20% gyroid sparse infill. This gives the models a bit more weight and
+My preferred settings are 3 wall loops with 25% gyroid sparse infill. This gives the models a bit more weight and
 strength against bowing forces, but something more default, like 2 wall loops, 15% grid sparse infill, is fine and does
 not lead to a weak enclosure.
 

src/components.scad

@@ -11,6 +11,10 @@ module m4_hole_countersink() {
 	cylinder(r1=m4_bolt_radius, r2=m4_bolt_countersink_radius, h=3.2, $fn=50, center=true);
 }
 
+module m6_hole() {
+	cylinder(r=m6_bolt_radius, h=100, $fn=50, center=true);
+}
+
 module panel_holes() {
 	// holes for mount bolts
 	translate([panel_to_frame_point_x, panel_to_frame_point_y, 0]) m4_hole();
@@ -27,25 +31,25 @@ module panel_holes() {
 // button hole, with extra wide bits for various uses (cutting out space
 // for snap-ins, etc.
 module button_24mm_hole() {
-	cylinder(r=small_button_radius, h=100, $fn=50, center=true);
+	cylinder(r=small_button_radius, h=100, $fn=100, center=true);
 	// carve out space for snap-ins and screw-in nuts
 	// translation is to leave 3mm thickness in the plate without recentering anything
-	translate([0, 0, -25]) cylinder(r=small_button_radius+button_radius_connector_space, h=49, $fn=50, center=true);
+	translate([0, 0, -25]) cylinder(r=small_button_radius+button_radius_connector_space, h=49, $fn=100, center=true);
 	// space for decorative button surround stuff
-	translate([0, 0, 50]) cylinder(r=small_button_radius*decorative_radius_scale, h=20, $fn=50, center=true);
+	translate([0, 0, 50]) cylinder(r=small_button_radius*decorative_radius_scale, h=20, $fn=100, center=true);
-	translate([0, 0, 70]) cylinder(r=small_button_radius*jumbo_decorative_radius_scale, h=20, $fn=50, center=true);
+	translate([0, 0, 70]) cylinder(r=small_button_radius*jumbo_decorative_radius_scale, h=20, $fn=100, center=true);
 }
 
 // button hole, with extra wide bits for various uses (cutting out space
 // for snap-ins, etc.
 module button_30mm_hole() {
-	cylinder(r=big_button_radius, h=100, $fn=50, center=true);
+	cylinder(r=big_button_radius, h=100, $fn=100, center=true);
 	// carve out space for snap-ins and screw-in nuts
 	// translation is to leave 3mm thickness in the plate without recentering anything
-	translate([0, 0, -25]) cylinder(r=big_button_radius+button_radius_connector_space, h=49, $fn=50, center=true);
+	translate([0, 0, -25]) cylinder(r=big_button_radius+button_radius_connector_space, h=49, $fn=100, center=true);
 	// space for decorative button surround stuff
-	translate([0, 0, 50]) cylinder(r=big_button_radius*decorative_radius_scale, h=20, $fn=50, center=true);
+	translate([0, 0, 50]) cylinder(r=big_button_radius*decorative_radius_scale, h=20, $fn=100, center=true);
-	translate([0, 0, 70]) cylinder(r=big_button_radius*jumbo_decorative_radius_scale, h=20, $fn=50, center=true);
+	translate([0, 0, 70]) cylinder(r=big_button_radius*jumbo_decorative_radius_scale, h=20, $fn=100, center=true);
 }
 
 module frame_hex_bolt_hole() {
@@ -90,6 +94,12 @@ module aux_control_three_button_cluster() {
 	translate([37, 0, 0]) button_24mm_hole();
 }
 
+module aux_control_three_button_tight_cluster() {
+	translate([-32, 0, 0]) button_24mm_hole();
+	translate([0, 0, 0]) button_24mm_hole();
+	translate([32, 0, 0]) button_24mm_hole();
+}
+
 module m2_mount_post() {
 	difference() {
 		cylinder(r=m2_screw_selftap_radius*2.25, h=3, $fn=6, center=true);
@@ -264,13 +274,13 @@ module frame_solid() {
 		];
 		hull() {
 			for (p = top_points) {
-				translate(p) cylinder(r=2, h=frame_bevel_height, center=true);
+				translate(p) cylinder(r=2, h=frame_bevel_height, center=true, $fn=4);
 			}
 			for (p = base_points) {
-				translate(p) cylinder(r=2, h=frame_z-(frame_bevel_height*2), center=true);
+				translate(p) cylinder(r=2, h=frame_z-(frame_bevel_height*2), center=true, $fn=4);
 			}
 			for (p = bottom_points) {
-				translate(p) cylinder(r=2, h=frame_bevel_height, center=true);
+				translate(p) cylinder(r=2, h=frame_bevel_height, center=true, $fn=4);
 			}
 		}
 	}
@@ -342,14 +352,14 @@ module frame() {
 // for cutting out slashes from the frame outer wall
 module slash_cutout() {
 	polyhedron([
-		[slash_inner_displacement/2, -frame_wall/2, -slash_height/2],
+		[slash_inner_displacement/2, -wall_cutout_depth, -slash_height/2],
-		[(slash_inner_displacement/2+slash_width), -frame_wall/2, -slash_height/2],
+		[(slash_inner_displacement/2+slash_width), -wall_cutout_depth, -slash_height/2],
-		[(slash_inner_displacement/2+slash_width), frame_wall/2, -slash_height/2],
+		[(slash_inner_displacement/2+slash_width), wall_cutout_depth, -slash_height/2],
-		[slash_inner_displacement/2, frame_wall/2, -slash_height/2],
+		[slash_inner_displacement/2, wall_cutout_depth, -slash_height/2],
-		[-(slash_inner_displacement/2+slash_width), -frame_wall/2, slash_height/2],
+		[-(slash_inner_displacement/2+slash_width), -wall_cutout_depth, slash_height/2],
-		[-slash_inner_displacement/2, -frame_wall/2, slash_height/2],
+		[-slash_inner_displacement/2, -wall_cutout_depth, slash_height/2],
-		[-slash_inner_displacement/2, frame_wall/2, slash_height/2],
+		[-slash_inner_displacement/2, wall_cutout_depth, slash_height/2],
-		[-(slash_inner_displacement/2+slash_width), frame_wall/2, slash_height/2]
+		[-(slash_inner_displacement/2+slash_width), wall_cutout_depth, slash_height/2]
 	], [[0, 1, 2, 3], [4, 5, 1, 0], [7, 6, 5, 4], [5, 6, 2, 1], [6, 7, 3, 2], [7, 4, 0, 3]]);
 }
 
@@ -396,24 +406,40 @@ module dir_arc_plus_w_24mm_8_button() {
 
 module dir_arc_30mm_thumb_button() {
 	// just my guesstimate on this one, but note that this is the same position as sega 2p (just mirrored)
-	translate([(panel_x/2)-28.06, (-panel_y/2)+62, 0]) button_30mm_hole();
+	translate([(panel_x/2)-sega_2p_column_1_left_panel_edge_offset, (-panel_y/2)+62, 0]) button_30mm_hole();
+}
+
+module dir_arc_30mm_fingers_left_button() {
+	translate([-dir_arc_30mm_column_3_offset, dir_arc_30mm_row_3_offset, 0]) dir_arc_30mm_thumb_button();
+}
+
+module dir_arc_30mm_fingers_middle_button() {
+	translate([-dir_arc_30mm_column_2_offset, dir_arc_30mm_row_3_offset, 0]) dir_arc_30mm_thumb_button();
+}
+
+module dir_arc_30mm_fingers_right_button() {
+	translate([0, dir_arc_30mm_row_2_offset, 0]) dir_arc_30mm_thumb_button();
 }
 
 module dir_arc_30mm_finger_buttons() {
-	translate([0, 57.2, 0]) dir_arc_30mm_thumb_button();
+	dir_arc_30mm_fingers_left_button();
-	translate([-33.8, 57.2+12.9, 0]) dir_arc_30mm_thumb_button();
+	dir_arc_30mm_fingers_middle_button();
-	translate([-33.8-34.8, 57.2+12.9, 0]) dir_arc_30mm_thumb_button();
+	dir_arc_30mm_fingers_right_button();
+}
+
+module dir_arc_30mm_w_button() {
+	translate([-26.8, dir_arc_w_30mm_row_4_offset, 0]) dir_arc_30mm_thumb_button();
 }
 
 module dir_arc_w_30mm() {
 	dir_arc_30mm_thumb_button();
 	dir_arc_30mm_finger_buttons();
-	translate([-26.8, 57.2+12.9+34.5, 0]) dir_arc_30mm_thumb_button();
+	dir_arc_30mm_w_button();
 }
 
 module dir_arc_w_30mm_plus_one() {
 	dir_arc_w_30mm();
-	translate([-33.8-34.8-33.8, 57.2, 0]) dir_arc_30mm_thumb_button();
+	translate([-dir_arc_30mm_column_3_offset-33.8, dir_arc_30mm_row_2_offset, 0]) dir_arc_30mm_thumb_button();
 }
 
 // Namco Noir (right hand)
@@ -440,31 +466,42 @@ module noir_plus_one() {
 // Sega Astro City 2P (right hand)
 
 module sega_2p_p1() {
-	translate([-panel_x/2, -panel_y/2, 0]) translate([28.06, 140, 0]) button_30mm_hole();
+	translate([-panel_x/2, -panel_y/2, 0]) translate([sega_2p_column_1_left_panel_edge_offset, 140, 0])
+		button_30mm_hole();
 }
 
 module sega_2p_6_button() {
 	// via slagcoin
 	sega_2p_p1();
-	translate([30.5, 11+9, 0]) sega_2p_p1();
+	translate([sega_2p_column_2_offset, 11+9, 0]) sega_2p_p1();
-	translate([30.5+36, 11+9, 0]) sega_2p_p1();
+	translate([sega_2p_column_3_offset, 11+9, 0]) sega_2p_p1();
 	translate([0, -19-9-11, 0]) sega_2p_p1();
-	translate([30.5, -19, 0]) sega_2p_p1();
+	translate([sega_2p_column_2_offset, -19, 0]) sega_2p_p1();
-	translate([30.5+36, -19, 0]) sega_2p_p1();
+	translate([sega_2p_column_3_offset, -19, 0]) sega_2p_p1();
 }
 
 module sega_2p() {
 	sega_2p_6_button();
-	translate([30.5+36+36, 11, 0]) sega_2p_p1();
+	translate([sega_2p_column_4_offset, 11, 0]) sega_2p_p1();
-	translate([30.5+36+36, -19-9, 0]) sega_2p_p1();
+	translate([sega_2p_column_4_offset, -19-9, 0]) sega_2p_p1();
 }
 
-module sega_2p_plus_one() {
+module sega_2p_nine_thumb_button() {
-	sega_2p();
 	// just my guesstimate on this one
 	translate([0, -19-9-11-19-9-11, 0]) sega_2p_p1();
 }
 
+module sega_2p_nine() {
+	sega_2p();
+	sega_2p_nine_thumb_button();
+}
+
+module sega_2p_eleven() {
+	sega_2p_nine();
+	translate([sega_2p_column_5_offset, 0, 0]) sega_2p_p1();
+	translate([sega_2p_column_5_offset, -19-9-11, 0]) sega_2p_p1();
+}
+
 module shiokenstar() {
 	translate([-172, 32, 0]) dir_arc_24mm_directionals();
 	sega_2p();

src/extras/bss-ae/README.md

@@ -0,0 +1,38 @@
+# BSS Arcade Edition
+
+Pieces for mounting to a Qanba 2009 in order to create the Buildable Stick System - Arcade Edition.
+
+## Pieces
+
+* 4 `interconnect-x` --- creating the internal support for joining two rows of panels
+* 6 `frames/pieces/interconnect` --- (core project) the standard piece for joining two+ columns of panels
+* 4 `extended-side-no-back` --- the extended side pieces, flush on the back to connect to each other
+* 4 `frames/pieces/extended/front-or-back` --- (core project) the front extended piece
+* 2 `extended-back` --- a small piece that fits into the Qanba 2009 "lip" for running cables
+* 1 `extended-back-left-mount`
+* 1 `extended-back-right-mount` --- extended back pieces that can be mounted to the Qanba 2009 base
+* 1 `panel-front-left-mount`
+* 1 `panel-front-right-mount` --- blank panels that can be mounted to the Qanba 2009 base
+* 6 `panels/inset/panel` --- the rest of the bottom panels
+* 4 `panels/inset/` panels of your choice for the front controls
+* 2 `panel-three-aux-buttons` --- for aux controls in the back row
+* 2 `panel-three-aux-buttons-and-rocker-hole` --- for aux controls and the wired rocker in the back row
+* 4 `decorative-plate-aux-control-tight-three-button-cluster` --- for decorating the aux control clusters
+* 4 `src/misc/` decorative plates of your choice for the front controls, and similar miscellany
+* 4 `mount-spacer` --- making a flush mount between the enclosure and the base
+
+## Hardware
+
+* 32 45mm M4 hex brass standoffs (or equivalent) for each panel/frame compartment
+* 64 8-12mm M4 countersunk hex bolts for attaching panels to the compartments
+* 4 8-12mm M3 hex bolts and 4 M3 flange nuts for attaching rocker switches to the back panels
+* 4 40mm M6 bolts for connecting the enclosure to the base
+* 4 M6 flange nuts
+
+## Components
+
+* 2 controller boards, e.g. the RP2040 Advanced Breakout Board
+* buttons and/or levers as desired
+* necessary wiring
+
+For the rest of the build (e.g. mounting a level to a panel), see the core README.

src/extras/bss-ae/decorative-plate-aux-control-tight-three-button-cluster.scad

@@ -0,0 +1,23 @@
+/* Decorative plate for aux buttons.
+ *
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+decorative_radius_scale = 1.5;
+include <components.scad>
+
+module aux_control_three_button_tight_cluster_decorative_plate() {
+	difference() {
+		// get a 2mm slice of the bigger button cylinders
+		translate([0, 0, -25]) hull() aux_control_three_button_tight_cluster();
+		// keep a thin slice
+		translate([0, 0, -100]) cube([500, 500, 198], center=true);
+		translate([0, 0, 100]) cube([500, 500, 198], center=true);
+		// cut out the normal holes
+		translate([0, 0, -1]) aux_control_three_button_tight_cluster();
+	}
+}
+
+aux_control_three_button_tight_cluster_decorative_plate();

src/extras/bss-ae/extended-back-left-mount.scad

@@ -0,0 +1,26 @@
+/* A back piece of the enclosure, with a mounting hole.
+ *
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <extended-back.scad>
+
+// X: inner post to post (inclusive) is approx. 428.625mm, so half that, minus half the post itself
+// (41.28mm) is how much in from a normal panel to put the M6 mounting hole
+// Y: eyeballed it to 30mm
+mount_hole_x = (panel_x / 2) - (panel_x - ((428.625 / 2) - (41.28 / 2)));
+mount_hole_y = (panel_y / 2) + 30;
+
+module left_mount_extended_back() {
+	difference() {
+		extended_back();
+		translate([mount_hole_x, -mount_hole_y, -30]) m6_hole();
+		// punch out the back for cables
+		cube([frame_x-70, frame_y+160, frame_z-20], center=true);
+	}
+}
+
+left_mount_extended_back();

src/extras/bss-ae/extended-back-right-mount.scad

@@ -0,0 +1,15 @@
+/* A back piece of the enclosure, with a mounting hole.
+ *
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <extended-back-left-mount.scad>
+
+module right_mount_extended_back() {
+	mirror([1, 0, 0]) left_mount_extended_back();
+}
+
+right_mount_extended_back();

src/extras/bss-ae/extended-back.scad

@@ -0,0 +1,30 @@
+/* A back piece extended the rest of the depth of the base.
+ *
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <frames/pieces/front-or-back-trapezoid.scad>
+
+module back_piece_extension() {
+	// combine the original wall with a copy to "pull" the wall out
+	hull() {
+		linear_extrude(height=80) bottom_piece_wall();
+		linear_extrude(height=(frame_wall-frame_bevel_height)) bottom_piece_wall();
+	}
+}
+
+module extended_back() {
+	difference() {
+		union() {
+			clean_front_or_back();
+			translate([0, -frame_y/2+frame_wall, 0]) rotate([90, 0, 0]) back_piece_extension();
+		}
+		cube([frame_x-60, frame_y+160-10, frame_z-10], center=true);
+		translate([0, -frame_y/2-35, 0]) cube([frame_x-20, 70, frame_z-10], center=true);
+	}
+}
+
+extended_back();

src/extras/bss-ae/extended-side-no-back.scad

@@ -0,0 +1,60 @@
+/* Create an extended side that is flush on the back to lay against another side.
+ *
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <frames/complete/left-frame.scad>
+use <frames/pieces/side.scad>
+use <frames/pieces/front-or-back-trapezoid.scad>
+
+module side_frame_piece_wall() {
+	// this doesn't use the side_frame_piece because of the 45 degree angle geometry
+	// not creating a clean thing to cut, so we just take the whole wall and use that
+	projection(cut=true) rotate([0, 90, 0]) translate([frame_x/2-frame_wall-(frame_bevel_height/2), 0, 0])
+		left_frame();
+}
+
+module side_and_bottom_frame_piece_wall() {
+	// get a slice of the pieces, to use it in extruding
+	// this doesn't use the side_frame_piece because of the 45 degree angle geometry
+	// not creating a clean thing to cut, so we just take the whole wall and use that
+	side_frame_piece_wall();
+	projection(cut=true) translate([0, -frame_y/2+frame_wall, 0]) rotate([90, 90, 0]) bottom_piece_extension();
+}
+
+module side_and_bottom_frame_piece_extension() {
+	// combine the original with a shrunken piece to "pull" the wall out
+	hull() {
+		linear_extrude(height=frame_extension_y) scale([0.5, 0.90, 1]) side_and_bottom_frame_piece_wall();
+		linear_extrude(height=frame_extension_y) scale([0.5, 1, 1])
+			difference() {
+				side_frame_piece_wall();
+				// remove the front piece so it doesn't interfere with the front extend
+				translate([0, -frame_y/2, 0]) square([frame_x, frame_y], center=true);
+			}
+		linear_extrude(height=frame_bevel_height) side_and_bottom_frame_piece_wall();
+	}
+}
+
+module extra_extended_left_or_right_frame_piece() {
+	difference() {
+		union() {
+			difference() {
+				side_frame_piece();
+				// chop off the old edge which is getting replaced with the extension
+				translate([-frame_x/2+frame_bevel_height/2, 0, 0])
+					cube([frame_bevel_height, frame_y, frame_z], center=true);
+			}
+			translate([-frame_x/2+frame_bevel_height*2, 0, 0])
+				rotate([0, -90, 0]) side_and_bottom_frame_piece_extension();
+		}
+		// minus the back piece where the wall would be, since there is no wall and the pieces and panels
+		// go flush against one another
+		translate([0, frame_y/2-(frame_wall/2), 0]) cube([frame_x*2, frame_wall, frame_z], center=true);
+	}
+}
+
+extra_extended_left_or_right_frame_piece();

src/extras/bss-ae/interconnect-x.scad

@@ -0,0 +1,30 @@
+/* Interconnect frames along the x-axis (the longer side)
+ *
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <frames/pieces/front-or-back.scad>
+
+module interconnect_frame_half_piece() {
+	translate([0, frame_y/2-frame_wall, 0]) difference() {
+		front_or_back_frame_piece();
+		translate([0, (-frame_y+frame_wall)/2-panel_overhang_amount, 0])
+			cube([overhang_panel_x, frame_wall+panel_overhang_amount*2, frame_z], center=true);
+	}
+}
+
+module interconnect_frame_piece() {
+	difference() {
+		union() {
+			// slight translate is to make this a 2-manifold in OpenSCAD
+			translate([0, -0.01, 0]) interconnect_frame_half_piece();
+			mirror([0, 1, 0]) interconnect_frame_half_piece();
+		}
+		rotate([0, 0, 90]) translate([-frame_y/2, 0, 0]) frame_cable_routing_hole();
+	}
+}
+
+interconnect_frame_piece();

src/extras/bss-ae/mount-spacer.scad

@@ -0,0 +1,17 @@
+/* Just a simple washer to go between the frame post and the arcade enclosure.
+ *
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+
+module mount_spacer() {
+	difference() {
+		cylinder(r=25, h=1.25, $fn=50, center=true);
+		m6_hole();
+	}
+}
+
+mount_spacer();

src/extras/bss-ae/panel-front-left-mount.scad

@@ -0,0 +1,24 @@
+/* A panel with a mount point for the front left of the enclosure.
+ *
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <panels/inset/panel.scad>
+
+// X: inner post to post (inclusive) is approx. 428.625mm, so half that, minus half the post itself
+// (41.28mm) is how much in from a normal panel to put the M6 mounting hole
+// Y: eyeballed it to 2": 50.80mm
+mount_hole_x = (panel_x / 2) - (panel_x - ((428.625 / 2) - (41.28 / 2)));
+mount_hole_y = (panel_y / 2) - 50.80;
+
+module front_left_mount_panel() {
+	difference() {
+		panel();
+		translate([-mount_hole_x, -mount_hole_y, 0]) m6_hole();
+	}
+}
+
+front_left_mount_panel();

src/extras/bss-ae/panel-front-right-mount.scad

@@ -0,0 +1,14 @@
+/*
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <panel-front-left-mount.scad>
+
+module front_right_mount_panel() {
+	mirror([1, 0, 0]) front_left_mount_panel();
+}
+
+front_right_mount_panel();

src/extras/bss-ae/panel-three-aux-buttons-and-rocker-hole.scad

@@ -0,0 +1,18 @@
+/* A panel for mounting a couple aux buttons in a out of the way spot.
+ *
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+
+module three_aux_button_and_20mm_panel() {
+	difference() {
+		panel();
+		translate([0, -70, 0]) aux_control_three_button_tight_cluster();
+		translate([0, frame_y/2-30, 0]) rotate([180, 0, 0]) neutrik_d_mount();
+	}
+}
+
+three_aux_button_and_20mm_panel();

src/extras/bss-ae/panel-three-aux-buttons.scad

@@ -0,0 +1,17 @@
+/* A panel for mounting a couple aux buttons in a out of the way spot.
+ *
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+
+module three_aux_button_panel() {
+	difference() {
+		panel();
+		translate([0, -70, 0]) aux_control_three_button_tight_cluster();
+	}
+}
+
+three_aux_button_panel();

src/frames/pieces/box/front-or-back-windowed-backslashes.scad

@@ -1,31 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <front-or-back.scad>
-use <front-or-back-inner-wall.scad>
-
-module backslashes() {
-	translate([-60, -(frame_y-frame_wall)/2, 0]) slash_cutout();
-	translate([-40, -(frame_y-frame_wall)/2, 0]) slash_cutout();
-	translate([-20, -(frame_y-frame_wall)/2, 0]) slash_cutout();
-	translate([0, -(frame_y-frame_wall)/2, 0]) slash_cutout();
-	translate([20, -(frame_y-frame_wall)/2, 0]) slash_cutout();
-	translate([40, -(frame_y-frame_wall)/2, 0]) slash_cutout();
-	translate([60, -(frame_y-frame_wall)/2, 0]) slash_cutout();
-}
-
-module backslashes_windowed_front_or_back_box_frame_piece() {
-	difference() {
-		front_or_back_box_frame_piece();
-		// subtract slashes from the frame wall
-		backslashes();
-		// subtract the inner wall area that will be provided by the other piece
-		front_or_back_inner_wall_frame_piece();
-	}
-}
-
-backslashes_windowed_front_or_back_box_frame_piece();

src/frames/pieces/box/front-or-back-windowed-horiz-stripes.scad

@@ -1,29 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <front-or-back.scad>
-use <front-or-back-inner-wall.scad>
-
-module front_stripe() {
-	cube([frame_x-(frame_mount_column_width*1.75)*2, frame_wall, 6], center=true);
-}
-
-module horiz_striped_windowed_front_or_back_box_frame_piece() {
-	difference() {
-		front_or_back_box_frame_piece();
-		// subtract frame wall windows
-		translate([0, -(frame_y-frame_wall)/2, 18]) front_stripe();
-		translate([0, -(frame_y-frame_wall)/2, 9]) front_stripe();
-		translate([0, -(frame_y-frame_wall)/2, 0]) front_stripe();
-		translate([0, -(frame_y-frame_wall)/2, -9]) front_stripe();
-		translate([0, -(frame_y-frame_wall)/2, -18]) front_stripe();
-		// subtract the inner wall area that will be provided by the other piece
-		front_or_back_inner_wall_frame_piece();
-	}
-}
-
-horiz_striped_windowed_front_or_back_box_frame_piece();

src/frames/pieces/box/side-windowed-backslashes.scad

@@ -1,29 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <side.scad>
-use <side-inner-wall.scad>
-
-module backslashes() {
-	translate([-(frame_x-frame_wall)/2, -40, 0]) rotate([0, 0, -90]) slash_cutout();
-	translate([-(frame_x-frame_wall)/2, -20, 0]) rotate([0, 0, -90]) slash_cutout();
-	translate([-(frame_x-frame_wall)/2, 0, 0]) rotate([0, 0, -90]) slash_cutout();
-	translate([-(frame_x-frame_wall)/2, 20, 0]) rotate([0, 0, -90]) slash_cutout();
-	translate([-(frame_x-frame_wall)/2, 40, 0]) rotate([0, 0, -90]) slash_cutout();
-}
-
-module backslashes_windowed_side_box_frame_piece() {
-	difference() {
-		side_box_frame_piece();
-		// subtract slashes from the frame wall
-		backslashes();
-		// subtract the inner wall area that will be provided by the other piece
-		side_inner_wall_frame_piece();
-	}
-}
-
-backslashes_windowed_side_box_frame_piece();

src/frames/pieces/box/side-windowed-horiz-stripes.scad

@@ -1,29 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <side.scad>
-use <side-inner-wall.scad>
-
-module side_stripe() {
-	cube([frame_wall, frame_y-(frame_mount_column_width*1.75)*2, 6], center=true);
-}
-
-module horiz_striped_windowed_side_box_frame_piece() {
-	difference() {
-		side_box_frame_piece();
-		// subtract frame wall windows
-		translate([-(frame_x-frame_wall)/2, 0, 18]) side_stripe();
-		translate([-(frame_x-frame_wall)/2, 0, 9]) side_stripe();
-		translate([-(frame_x-frame_wall)/2, 0, 0]) side_stripe();
-		translate([-(frame_x-frame_wall)/2, 0, -9]) side_stripe();
-		translate([-(frame_x-frame_wall)/2, 0, -18]) side_stripe();
-		// subtract the inner wall area that will be provided by the other piece
-		side_inner_wall_frame_piece();
-	}
-}
-
-horiz_striped_windowed_side_box_frame_piece();

src/frames/pieces/box/side.scad

@@ -1,23 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <front-or-back.scad>
-
-module side_box_frame_piece() {
-	piece_width = panel_support_width+frame_wall+frame_mount_column_width;
-	difference() {
-		// side piece is left/right agnostic
-		frame();
-		// minus the top and bottom
-		front_or_back_box_frame_piece();
-		rotate([180, 0, 0]) front_or_back_box_frame_piece();
-		// and just chop out the rest of the frame
-		translate([piece_width, 0, 0]) cube([frame_x, frame_y+1, frame_z+1], center=true);
-	}
-}
-
-side_box_frame_piece();

src/frames/pieces/extended/front-or-back-clean-for-extended-side-aux-and-neutrik.scad

@@ -1,28 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <front-or-back-clean-for-extended-side.scad>
-
-module front_or_back_aux_and_neutrik_box_frame_piece_for_extended_side() {
-	difference() {
-		front_or_back_box_frame_piece_for_extended_side();
-
-		// aux button holes
-		translate([-35.25, -101.5, 0]) rotate([90, 0, 0]) aux_control_three_button_cluster();
-		translate([-35.25, -(frame_y/2)+neutrik_panel_thickness+4, 0]) frame_cutout();
-		translate([-72.25, -(frame_y/2)+neutrik_panel_thickness+4, 0]) frame_cutout();
-		translate([2, -(frame_y/2)+neutrik_panel_thickness+4, 0]) frame_cutout();
-
-		// neutrix button hole
-		translate([frame_center_to_neutrik, -(frame_y/2)+neutrik_panel_thickness, 0])
-			rotate([270, 0, 0]) neutrik_d_mount();
-		translate([frame_center_to_neutrik, -(frame_y/2)+neutrik_panel_thickness+4, 0])
-			frame_cutout();
-	}
-}
-
-front_or_back_aux_and_neutrik_box_frame_piece_for_extended_side();

src/frames/pieces/extended/front-or-back-clean-for-extended-side-windowed-backslashes.scad

@@ -1,18 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <frames/pieces/box/front-or-back-windowed-backslashes.scad>
-
-module backslashes_windowed_front_or_back_box_frame_piece_for_extended_side() {
-	difference() {
-		backslashes_windowed_front_or_back_box_frame_piece();
-		// ...minus the frame wall and lip on the left
-		translate([-frame_x/2+frame_wall/2, 0, 0]) cube([frame_wall, frame_y, frame_z], center=true);
-	}
-}
-
-backslashes_windowed_front_or_back_box_frame_piece_for_extended_side();

src/frames/pieces/extended/front-or-back-clean-for-extended-side-windowed-forwardslashes.scad

@@ -1,18 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <frames/pieces/box/front-or-back-windowed-forwardslashes.scad>
-
-module forwardslashes_windowed_front_or_back_box_frame_piece_for_extended_side() {
-	difference() {
-		forwardslashes_windowed_front_or_back_box_frame_piece();
-		// ...minus the frame wall and lip on the left
-		translate([-frame_x/2+frame_wall/2, 0, 0]) cube([frame_wall, frame_y, frame_z], center=true);
-	}
-}
-
-forwardslashes_windowed_front_or_back_box_frame_piece_for_extended_side();

src/frames/pieces/extended/front-or-back-clean-for-extended-side-windowed-horiz-stripes.scad

@@ -1,18 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <frames/pieces/box/front-or-back-windowed-horiz-stripes.scad>
-
-module horiz_striped_windowed_front_or_back_box_frame_piece_for_extended_side() {
-	difference() {
-		horiz_striped_windowed_front_or_back_box_frame_piece();
-		// ...minus the frame wall and lip on the left
-		translate([-frame_x/2+frame_wall/2, 0, 0]) cube([frame_wall, frame_y, frame_z], center=true);
-	}
-}
-
-horiz_striped_windowed_front_or_back_box_frame_piece_for_extended_side();

src/frames/pieces/extended/front-or-back-clean-for-extended-side-windowed.scad

@@ -1,18 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <frames/pieces/box/front-or-back-windowed.scad>
-
-module windowed_front_or_back_box_frame_piece_for_extended_side() {
-	difference() {
-		windowed_front_or_back_box_frame_piece();
-		// ...minus the frame wall and lip on the left
-		translate([-frame_x/2+frame_wall/2, 0, 0]) cube([frame_wall, frame_y, frame_z], center=true);
-	}
-}
-
-windowed_front_or_back_box_frame_piece_for_extended_side();

src/frames/pieces/extended/front-or-back-clean-for-extended-side.scad

@@ -1,18 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <frames/pieces/box/front-or-back.scad>
-
-module front_or_back_box_frame_piece_for_extended_side() {
-	difference() {
-		front_or_back_box_frame_piece();
-		// ...minus the frame wall and lip on the left
-		translate([-frame_x/2+frame_wall/2, 0, 0]) cube([frame_wall, frame_y, frame_z], center=true);
-	}
-}
-
-front_or_back_box_frame_piece_for_extended_side();

src/frames/pieces/front-or-back-aux-and-neutrik.scad

@@ -7,9 +7,9 @@ include <parameters.scad>
 include <components.scad>
 use <front-or-back.scad>
 
-module front_or_back_aux_and_neutrik_box_frame_piece() {
+module front_or_back_aux_and_neutrik_frame_piece() {
 	difference() {
-		front_or_back_box_frame_piece();
+		front_or_back_frame_piece();
 
 		// aux button holes
 		translate([-35.25, -101.5, 0]) rotate([90, 0, 0]) aux_control_three_button_cluster();
@@ -25,4 +25,4 @@ module front_or_back_aux_and_neutrik_box_frame_piece() {
 	}
 }
 
-front_or_back_aux_and_neutrik_box_frame_piece();
+front_or_back_aux_and_neutrik_frame_piece();

src/frames/pieces/front-or-back-inner-wall-for-horiz-stripes.scad

@@ -0,0 +1,31 @@
+/* The inner top/bottom wall of the frame, for being displayed through a horizontal stripe windowed part.
+ *
+ * SPDX-FileCopyrightText: © 2025 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <front-or-back-inner-wall.scad>
+use <front-or-back-windowed-horiz-stripes.scad>
+
+// for stability's sake, this piece juts out a bit from the outside of the wall, so we
+// need to hack the window piece a bit to subtract from the longer and get ours longer
+module horiz_striped_windowed_front_or_back_frame_piece() {
+	difference() {
+		front_or_back_longish_frame_piece();
+		// subtract frame wall windows
+		front_horiz_stripes();
+		// subtract the inner wall area that will be provided by the other piece
+		front_or_back_inner_wall_frame_piece();
+	}
+}
+
+module front_or_back_windowed_horiz_stripes_inner_wall_frame_piece() {
+	difference() {
+		front_or_back_longish_frame_piece();
+		horiz_striped_windowed_front_or_back_frame_piece();
+	}
+}
+
+front_or_back_windowed_horiz_stripes_inner_wall_frame_piece();

src/frames/pieces/front-or-back-inner-wall.scad

@@ -18,7 +18,7 @@ module mount_column_cutout() {
 module front_or_back_inner_wall_frame_base_piece() {
 	difference() {
 		// Z is scaled so that some part of the original part inner wall is retained
-		scale([1, 1, inner_frame_z_decorative_scale]) front_or_back_box_frame_piece();
+		scale([1, 1, inner_frame_z_decorative_scale]) front_or_back_frame_piece();
 		// minus the outer wall
 		translate([0, -(frame_y-frame_wall)/2, 0]) cube([frame_x, frame_wall, frame_z], center=true);
 		// minus half of the mounting posts (the other half provided by the outer wall)
@@ -36,4 +36,30 @@ module front_or_back_inner_wall_frame_piece() {
 		translate([0, 0, 50]) rotate([90, 0, 0]) front_or_back_inner_wall_frame_base_piece();
 }
 
+// this is here for use in inner wall pieces, but unlike the side longish piece (in its own
+// .scad), front_or_back_longish_frame_piece is not printable so we'll just stash it here
+module front_or_back_frame_piece_wall() {
+       // get a slice of the whole wall, to use it for making the extended version
+       difference() {
+               front_or_back_frame_piece();
+               cube([frame_x, frame_y-frame_wall*2, frame_z], center=true);
+       }
+}
+
+// this is here for use in inner wall pieces, but unlike the side longish piece (in its own
+// .scad), front_or_back_longish_frame_piece is not printable so we'll just stash it here
+module front_or_back_frame_piece_extension() {
+	hull() {
+		front_or_back_frame_piece_wall();
+		translate([0, -frame_bevel_height*2, 0]) front_or_back_frame_piece_wall();
+	}
+}
+
+// this is here for use in inner wall pieces, but unlike the side longish piece (in its own
+// .scad), front_or_back_longish_frame_piece is not printable so we'll just stash it here
+module front_or_back_longish_frame_piece() {
+	front_or_back_frame_piece_extension();
+	front_or_back_frame_piece();
+}
+
 front_or_back_inner_wall_frame_piece();

src/frames/pieces/front-or-back-trapezoid.scad

@@ -5,11 +5,11 @@
 
 include <parameters.scad>
 include <components.scad>
-use <front-or-back-clean-for-extended-side.scad>
+use <front-or-back.scad>
 
 module clean_front_or_back() {
 	difference() {
-		front_or_back_box_frame_piece_for_extended_side();
+		front_or_back_frame_piece();
 		// chop off the lip we left on the basic piece
 		translate([-frame_x/2+frame_wall/2, 0, 0]) cube([frame_wall, frame_y, frame_z], center=true);
 	};
@@ -29,9 +29,9 @@ module bottom_piece_extension() {
 	}
 }
 
-module extended_front_or_back_frame_piece() {
+module front_or_back_trapezoid_frame_piece() {
 	clean_front_or_back();
 	translate([0, -frame_y/2+frame_wall, 0]) rotate([90, 0, 0]) bottom_piece_extension();
 }
 
-extended_front_or_back_frame_piece();
+front_or_back_trapezoid_frame_piece();

src/frames/pieces/front-or-back-windowed-backslashes.scad

@@ -0,0 +1,40 @@
+/*
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <front-or-back.scad>
+use <front-or-back-inner-wall.scad>
+
+module backslashes() {
+	translate([-70, -(frame_y-frame_wall)/2, 0]) slash_cutout();
+	translate([-50, -(frame_y-frame_wall)/2, 0]) slash_cutout();
+	translate([-30, -(frame_y-frame_wall)/2, 0]) slash_cutout();
+	translate([-10, -(frame_y-frame_wall)/2, 0]) slash_cutout();
+	translate([10, -(frame_y-frame_wall)/2, 0]) slash_cutout();
+	translate([30, -(frame_y-frame_wall)/2, 0]) slash_cutout();
+	translate([50, -(frame_y-frame_wall)/2, 0]) slash_cutout();
+	translate([70, -(frame_y-frame_wall)/2, 0]) slash_cutout();
+}
+
+module backslashes_windowed_front_or_back_frame_piece() {
+	difference() {
+		front_or_back_frame_piece();
+		// subtract slashes from the frame wall
+		backslashes();
+		// subtract the inner wall area that will be provided by the other piece
+		front_or_back_inner_wall_frame_piece();
+	}
+}
+
+module backslashes_windowed_front_or_back_frame_piece_for_extended_side() {
+	difference() {
+		backslashes_windowed_front_or_back_frame_piece();
+		// ...minus the frame wall and lip on the left
+		translate([-frame_x/2+frame_wall/2, 0, 0]) cube([frame_wall, frame_y, frame_z], center=true);
+	}
+}
+
+backslashes_windowed_front_or_back_frame_piece_for_extended_side();

src/frames/pieces/front-or-back-windowed-forwardslashes.scad

@@ -9,9 +9,9 @@ use <front-or-back.scad>
 use <front-or-back-inner-wall.scad>
 use <front-or-back-windowed-backslashes.scad>
 
-module forwardslashes_windowed_front_or_back_box_frame_piece() {
+module forwardslashes_windowed_front_or_back_frame_piece() {
 	difference() {
-		front_or_back_box_frame_piece();
+		front_or_back_frame_piece();
 		// subtract slashes from the frame wall
 		mirror([0, 0, 1]) backslashes();
 		// subtract the inner wall area that will be provided by the other piece
@@ -19,4 +19,12 @@ module forwardslashes_windowed_front_or_back_box_frame_piece() {
 	}
 }
 
-forwardslashes_windowed_front_or_back_box_frame_piece();
+module forwardslashes_windowed_front_or_back_frame_piece_for_extended_side() {
+	difference() {
+		forwardslashes_windowed_front_or_back_frame_piece();
+		// ...minus the frame wall and lip on the left
+		translate([-frame_x/2+frame_wall/2, 0, 0]) cube([frame_wall, frame_y, frame_z], center=true);
+	}
+}
+
+forwardslashes_windowed_front_or_back_frame_piece_for_extended_side();

src/frames/pieces/front-or-back-windowed-horiz-stripes.scad

@@ -0,0 +1,33 @@
+/*
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <front-or-back.scad>
+use <front-or-back-inner-wall.scad>
+
+module front_horiz_stripe() {
+	cube([frame_x-(frame_mount_column_width*1.75)*2, wall_cutout_depth, 5], center=true);
+}
+
+module front_horiz_stripes() {
+	translate([0, -(frame_y-frame_wall)/2, 18]) front_horiz_stripe();
+	translate([0, -(frame_y-frame_wall)/2, 9]) front_horiz_stripe();
+	translate([0, -(frame_y-frame_wall)/2, 0]) front_horiz_stripe();
+	translate([0, -(frame_y-frame_wall)/2, -9]) front_horiz_stripe();
+	translate([0, -(frame_y-frame_wall)/2, -18]) front_horiz_stripe();
+}
+
+module horiz_striped_windowed_front_or_back_frame_piece() {
+	difference() {
+		front_or_back_frame_piece();
+		// subtract frame wall windows
+		front_horiz_stripes();
+		// subtract the inner wall area that will be provided by the other piece
+		front_or_back_inner_wall_frame_piece();
+	}
+}
+
+horiz_striped_windowed_front_or_back_frame_piece();

src/frames/pieces/front-or-back-windowed.scad

@@ -14,9 +14,9 @@ module front_or_back_window() {
 			frame_z-panel_z*3], center=true);
 }
 
-module windowed_front_or_back_box_frame_piece() {
+module windowed_front_or_back_frame_piece() {
 	difference() {
-		front_or_back_box_frame_piece();
+		front_or_back_frame_piece();
 		// subtract frame wall window
 		front_or_back_window();
 		// subtract the inner wall area that will be provided by the other piece
@@ -24,4 +24,12 @@ module windowed_front_or_back_box_frame_piece() {
 	}
 }
 
-windowed_front_or_back_box_frame_piece();
+module windowed_front_or_back_frame_piece_for_extended_side() {
+	difference() {
+		windowed_front_or_back_frame_piece();
+		// ...minus the frame wall and lip on the left
+		translate([-frame_x/2+frame_wall/2, 0, 0]) cube([frame_wall, frame_y, frame_z], center=true);
+	}
+}
+
+windowed_front_or_back_frame_piece_for_extended_side();

src/frames/pieces/front-or-back.scad

@@ -6,25 +6,20 @@
 include <parameters.scad>
 include <components.scad>
 use <frames/complete/left-frame.scad>
+use <side.scad>
 
-module front_or_back_box_frame_piece() {
+module front_or_back_frame_piece() {
 	piece_width = panel_support_width+frame_wall+frame_mount_column_width;
 	intersection() {
 		left_frame();
 		difference() {
 			// include the whole bottom wall (including mount columns)
-			translate([0, -(frame_y/2)+(piece_width/2), 0]) cube([frame_x, piece_width, frame_z], center=true);
+			translate([0, -(frame_y/2)+(piece_width/2), 0])
-			// ...minus the frame wall and lip on the left
+				cube([frame_piece_x_x, piece_width, frame_z], center=true);
-			translate([-frame_x/2+frame_wall/2, 0, 0])
-				cube([frame_wall, frame_y-frame_wall*2, frame_z], center=true);
-			linear_extrude(height=frame_z, center=true) polygon([
-				[-frame_x/2, -frame_y/2], [-frame_x/2+frame_wall, -frame_y/2+frame_wall],
-				[-frame_x/2, -frame_y/2+frame_wall]
-			]);
 			// ...minus a slot for the combining piece to go into
 			cube([frame_x, frame_y-(panel_support_width+frame_wall)*2, inner_frame_z/3], center=true);
 		}
 	}
 }
 
-front_or_back_box_frame_piece();
+front_or_back_frame_piece();

src/frames/pieces/interconnect.scad

@@ -5,11 +5,11 @@
 
 include <parameters.scad>
 include <components.scad>
-use <box/side.scad>
+use <side.scad>
 
 module interconnect_frame_half_piece() {
 	translate([frame_x/2-frame_wall, 0, 0]) difference() {
-		side_box_frame_piece();
+		side_frame_piece();
 		rotate([0, 0, 180]) side_chopper();
 	}
 }

src/frames/pieces/side-inner-wall-for-horiz-stripes.scad

@@ -0,0 +1,32 @@
+/* The inner side wall of the frame, for being displayed through a horizontal stripe windowed part.
+ *
+ * SPDX-FileCopyrightText: © 2025 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <side-inner-wall.scad>
+use <side-longish.scad>
+use <side-windowed-horiz-stripes.scad>
+
+// for stability's sake, this piece juts out a bit from the outside of the wall, so we
+// need to hack the window piece a bit to subtract from the longer and get ours longer
+module horiz_striped_windowed_side_frame_piece() {
+	difference() {
+		side_longish_frame_piece();
+		// subtract frame wall windows
+		side_horiz_stripes();
+		// subtract the inner wall area that will be provided by the other piece
+		side_inner_wall_frame_piece();
+	}
+}
+
+module side_windowed_horiz_stripes_inner_wall_frame_piece() {
+	difference() {
+		side_longish_frame_piece();
+		horiz_striped_windowed_side_frame_piece();
+	}
+}
+
+side_windowed_horiz_stripes_inner_wall_frame_piece();

src/frames/pieces/side-inner-wall.scad

@@ -18,7 +18,7 @@ module mount_column_cutout() {
 module side_inner_wall_frame_base_piece() {
 	difference() {
 		// Z is scaled so that some part of the original part inner wall is retained
-		scale([1, 1, inner_frame_z_decorative_scale]) side_box_frame_piece();
+		scale([1, 1, inner_frame_z_decorative_scale]) side_frame_piece();
 		// minus the outer wall
 		translate([-(frame_x-frame_wall)/2, 0, 0]) cube([frame_wall, frame_y, frame_z], center=true);
 		// minus half of the mounting posts (the other half provided by the outer wall)

src/frames/pieces/side-longish.scad

@@ -0,0 +1,32 @@
+/*
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <side.scad>
+
+module side_frame_piece_wall() {
+	// get a slice of the whole wall, to use it for making the extended version
+	difference() {
+		side_frame_piece();
+		cube([frame_x-frame_wall*2, frame_y, frame_z], center=true);
+	}
+}
+
+module side_frame_piece_extension() {
+	// hulling the two walls provides a wall with a thicker x
+	hull() {
+		side_frame_piece_wall();
+		translate([-frame_bevel_height*2, 0, 0]) side_frame_piece_wall();
+	}
+}
+
+module side_longish_frame_piece() {
+	// combine the wider wall and the original piece
+	side_frame_piece_extension();
+	side_frame_piece();
+}
+
+side_longish_frame_piece();

src/frames/pieces/side-trapezoid-extended-to-front-trapezoid.scad

@@ -6,8 +6,8 @@
 include <parameters.scad>
 include <components.scad>
 use <frames/complete/left-frame.scad>
-use <frames/pieces/box/side.scad>
+use <side.scad>
-use <front-or-back.scad>
+use <front-or-back-trapezoid.scad>
 
 module side_and_bottom_frame_piece_wall() {
 	// get a slice of the pieces, to use it in extruding
@@ -26,13 +26,13 @@ module side_and_bottom_frame_piece_extension() {
 	}
 }
 
-module extra_extended_left_or_right_frame_piece() {
+module side_trapezoid_extended_to_front_frame_piece() {
 	difference() {
-		side_box_frame_piece();
+		side_frame_piece();
 		// chop off the old edge which is getting replaced with the extension
 		translate([-frame_x/2+frame_bevel_height/2, 0, 0]) cube([frame_bevel_height, frame_y, frame_z], center=true);
 	}
 	translate([-frame_x/2+frame_bevel_height*2, 0, 0]) rotate([0, -90, 0]) side_and_bottom_frame_piece_extension();
 }
 
-extra_extended_left_or_right_frame_piece();
+side_trapezoid_extended_to_front_frame_piece();

src/frames/pieces/side-trapezoid.scad

@@ -6,8 +6,7 @@
 include <parameters.scad>
 include <components.scad>
 use <frames/complete/left-frame.scad>
-use <frames/pieces/box/side.scad>
+use <side.scad>
-use <front-or-back-clean-for-extended-side.scad>
 
 module side_frame_piece_wall() {
 	// get a slice of the piece, to use it in extruding
@@ -25,13 +24,13 @@ module side_frame_piece_extension() {
 	}
 }
 
-module extended_left_or_right_frame_piece() {
+module side_trapezoid_frame_piece() {
 	difference() {
-		side_box_frame_piece();
+		side_frame_piece();
 		// chop off the old edge which is getting replaced with the extension
 		translate([-frame_x/2+frame_bevel_height/2, 0, 0]) cube([frame_bevel_height, frame_y, frame_z], center=true);
 	}
 	translate([-frame_x/2+frame_bevel_height*2, 0, 0]) rotate([0, -90, 0]) side_frame_piece_extension();
 }
 
-extended_left_or_right_frame_piece();
+side_trapezoid_frame_piece();

src/frames/pieces/side-windowed-backslashes.scad

@@ -0,0 +1,30 @@
+/*
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <side.scad>
+use <side-inner-wall.scad>
+
+module backslashes() {
+	translate([-(frame_x-frame_wall)/2, -50, 0]) rotate([0, 0, -90]) slash_cutout();
+	translate([-(frame_x-frame_wall)/2, -30, 0]) rotate([0, 0, -90]) slash_cutout();
+	translate([-(frame_x-frame_wall)/2, -10, 0]) rotate([0, 0, -90]) slash_cutout();
+	translate([-(frame_x-frame_wall)/2, 10, 0]) rotate([0, 0, -90]) slash_cutout();
+	translate([-(frame_x-frame_wall)/2, 30, 0]) rotate([0, 0, -90]) slash_cutout();
+	translate([-(frame_x-frame_wall)/2, 50, 0]) rotate([0, 0, -90]) slash_cutout();
+}
+
+module backslashes_windowed_side_frame_piece() {
+	difference() {
+		side_frame_piece();
+		// subtract slashes from the frame wall
+		backslashes();
+		// subtract the inner wall area that will be provided by the other piece
+		side_inner_wall_frame_piece();
+	}
+}
+
+backslashes_windowed_side_frame_piece();

src/frames/pieces/side-windowed-forwardslashes.scad

@@ -9,9 +9,9 @@ use <side.scad>
 use <side-inner-wall.scad>
 use <side-windowed-backslashes.scad>
 
-module forwardslashes_windowed_side_box_frame_piece() {
+module forwardslashes_windowed_side_frame_piece() {
 	difference() {
-		side_box_frame_piece();
+		side_frame_piece();
 		// subtract slashes from the frame wall
 		mirror([0, 0, 1]) backslashes();
 		// subtract the inner wall area that will be provided by the other piece
@@ -19,4 +19,4 @@ module forwardslashes_windowed_side_box_frame_piece() {
 	}
 }
 
-forwardslashes_windowed_side_box_frame_piece();
+forwardslashes_windowed_side_frame_piece();

src/frames/pieces/side-windowed-horiz-stripes.scad

@@ -0,0 +1,33 @@
+/*
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <side.scad>
+use <side-inner-wall.scad>
+
+module side_horiz_stripe() {
+	cube([wall_cutout_depth, frame_y-(frame_mount_column_width*1.75)*2, 5], center=true);
+}
+
+module side_horiz_stripes() {
+	translate([-(frame_x-frame_wall)/2, 0, 18]) side_horiz_stripe();
+	translate([-(frame_x-frame_wall)/2, 0, 9]) side_horiz_stripe();
+	translate([-(frame_x-frame_wall)/2, 0, 0]) side_horiz_stripe();
+	translate([-(frame_x-frame_wall)/2, 0, -9]) side_horiz_stripe();
+	translate([-(frame_x-frame_wall)/2, 0, -18]) side_horiz_stripe();
+}
+
+module horiz_striped_windowed_side_frame_piece() {
+	difference() {
+		side_frame_piece();
+		// subtract frame wall windows
+		side_horiz_stripes();
+		// subtract the inner wall area that will be provided by the other piece
+		side_inner_wall_frame_piece();
+	}
+}
+
+horiz_striped_windowed_side_frame_piece();

src/frames/pieces/side-windowed.scad

@@ -8,9 +8,9 @@ include <components.scad>
 use <side.scad>
 use <side-inner-wall.scad>
 
-module windowed_side_box_frame_piece() {
+module windowed_side_frame_piece() {
 	difference() {
-		side_box_frame_piece();
+		side_frame_piece();
 		// subtract frame wall window
 		translate([-frame_x/2, 0, 0])
 			cube([(frame_wall+panel_support_width)*2, frame_y-frame_mount_column_width*3.5,
@@ -20,4 +20,4 @@ module windowed_side_box_frame_piece() {
 	}
 }
 
-windowed_side_box_frame_piece();
+windowed_side_frame_piece();

src/frames/pieces/side.scad

@@ -0,0 +1,26 @@
+/*
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <frames/complete/left-frame.scad>
+use <front-or-back.scad>
+
+module side_frame_piece() {
+	piece_width = panel_support_width+frame_wall+frame_mount_column_width;
+	difference() {
+		intersection() {
+			left_frame();
+			// include the whole left wall (including mount columns)
+			translate([-(frame_x/2)+(piece_width/2), 0, 0])
+				cube([piece_width, frame_piece_y_y, frame_z], center=true);
+		}
+		// minus the top and bottom
+		front_or_back_frame_piece();
+		rotate([180, 0, 0]) front_or_back_frame_piece();
+	}
+}
+
+side_frame_piece();

src/misc/decorative-corner.scad

@@ -0,0 +1,31 @@
+/* A bit of plastic to put on the corners of a case, just for more flair and seam hiding.
+ *
+ * Note: this only works on the standard side and front/back pieces, not the longish/extended pieces.
+ *
+ * SPDX-FileCopyrightText: © 2025 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+
+module decorative_corner() {
+	deco_thickness = 2;
+	difference() {
+		// start with the frame shape itself, just grown a bit
+		resize(newsize=[frame_x+(deco_thickness*2), frame_y+(deco_thickness*2), frame_z+(deco_thickness*2)])
+			frame_solid();
+		// lob off the pieces to make a corner
+		translate([(panel_to_frame_point_offset+deco_thickness*2)*1.5, 0, 0])
+			cube([frame_x, frame_y*2, frame_z*2], center=true);
+		translate([0, (panel_to_frame_point_offset+deco_thickness*2)*1.5, 0])
+			cube([frame_x*2, frame_y, frame_z*2], center=true);
+		// carve out the inside
+		frame_solid();
+		// holes for bolts
+		translate([0, 0, frame_z/2]) panel_holes();
+		translate([0, 0, -frame_z/2]) rotate([0, 180, 0]) panel_holes();
+	}
+}
+
+decorative_corner();

src/misc/decorative-middle.scad

@@ -0,0 +1,36 @@
+/* A bit of plastic to put on the center of a case front, just for more flair and seam hiding.
+ *
+ * SPDX-FileCopyrightText: © 2025 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+
+module decorative_half_middle() {
+	deco_thickness = 2;
+	translate([-frame_x/2+frame_wall, 0, 0]) difference() {
+		// start with the frame shape itself, just grown a bit
+		resize(newsize=[frame_x+(deco_thickness*2), frame_y+(deco_thickness*2), frame_z+(deco_thickness*2)])
+			frame_solid();
+		// make this appropriate for the middle
+		scale([1, 1, 2]) side_chopper();
+		// lob off the pieces to make a cornerish piece
+		translate([-(panel_to_frame_point_offset+deco_thickness*2)*1.65, 0, 0])
+			cube([frame_x, frame_y*2, frame_z*2], center=true);
+		translate([0, (panel_to_frame_point_offset+deco_thickness*2)*1.5, 0])
+			cube([frame_x*2, frame_y, frame_z*2], center=true);
+		// carve out the inside
+		frame_solid();
+		// holes for bolts
+		translate([0, 0, frame_z/2]) panel_holes();
+		translate([0, 0, -frame_z/2]) rotate([0, 180, 0]) panel_holes();
+	}
+}
+
+module decorative_middle() {
+	decorative_half_middle();
+	mirror([1, 0, 0]) decorative_half_middle();
+}
+
+decorative_middle();

src/misc/decorative-plate-24mm-button.scad

@@ -4,6 +4,7 @@
  */
 
 include <parameters.scad>
+decorative_radius_scale = 1.5;
 include <components.scad>
 
 module button_24mm_decorative_plate() {

src/misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-nine-rectangles.scad

@@ -0,0 +1,35 @@
+/*
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+decorative_radius_scale = 1.5;
+include <components.scad>
+
+module dir_arc_plus_w_30mm_and_sega_2p_nine_decorative_plate_of_plates() {
+	difference() {
+		// layout offset + 30 = width for layout plus button width + 19+3 = space around button
+		left_plate_x = dir_arc_30mm_column_3_offset + 30 + 19;
+		// layout offset + 30 = width for layout plus button width + 19+3 = space around button
+		left_plate_y = dir_arc_w_30mm_row_4_offset + 30 + 19;
+		left_plate_center_x = (left_plate_x + sega_2p_column_1_left_panel_edge_offset - 22)/2;
+		// layout offset + 30 = width for layout plus button width + 19+3 = space around button
+		right_plate_x = sega_2p_column_4_offset + 30 + 19;
+		right_plate_center_x = (right_plate_x + sega_2p_column_1_left_panel_edge_offset - 22)/2;
+
+		union() {
+			// y values are based on the other half below
+			translate([right_plate_center_x, 15, 0]) linear_extrude(2) offset(r=3, $fn=100)
+				square([right_plate_x, left_plate_y], center=true);
+			translate([-left_plate_center_x, 15, 0]) linear_extrude(2) offset(r=3, $fn=100)
+				square([left_plate_x, left_plate_y], center=true);
+			/* translate([-50, 0, 0]) cube([200, 200, 2], center=true); */
+		}
+		// cut out the normal holes
+		translate([-panel_x/2, 0, -1]) dir_arc_w_30mm();
+		translate([panel_x/2, 0, -1]) sega_2p_nine();
+	}
+}
+
+dir_arc_plus_w_30mm_and_sega_2p_nine_decorative_plate_of_plates();

src/misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-nine-superplate.scad

@@ -0,0 +1,34 @@
+/* decorative plate for directional and action buttons.
+ *
+ * SPDX-FileCopyrightText: © 2025 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+decorative_radius_scale = 1.5;
+include <components.scad>
+
+module dir_arc_plus_w_30mm_and_sega_2p_nine_decorative_superplate() {
+	difference() {
+		union() {
+			hull() difference() {
+				// get a 2mm slice of the bigger button cylinders
+				union() {
+					translate([-panel_x/2, 0, -50]) dir_arc_w_30mm();
+					translate([panel_x/2, 0, -50]) sega_2p_nine();
+					// customized position to make a top point even with the
+					// top of the dir_arc_w_30mm piece, because it being
+					// at an angle otherwise looks silly IMO
+					translate([panel_x*23/32, 26.6, -50]) sega_2p_p1();
+				}
+				translate([0, 0, -100]) cube([500, 500, 198], center=true);
+				translate([0, 0, 100]) cube([500, 500, 198], center=true);
+			}
+		}
+		// cut out the normal holes
+		translate([-panel_x/2, 0, -1]) dir_arc_w_30mm();
+		translate([panel_x/2, 0, -1]) sega_2p_nine();
+	}
+}
+
+dir_arc_plus_w_30mm_and_sega_2p_nine_decorative_superplate();

src/misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-nine.scad

@@ -6,19 +6,19 @@
 include <parameters.scad>
 include <components.scad>
 
-module dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate() {
+module dir_arc_plus_w_30mm_and_sega_2p_nine_decorative_plate() {
 	difference() {
 		// get a 2mm slice of the bigger button cylinders
 		union() {
 			translate([-panel_x/2, 0, -65]) dir_arc_w_30mm();
-			translate([panel_x/2, 0, -65]) sega_2p_plus_one();
+			translate([panel_x/2, 0, -65]) sega_2p_nine();
 		}
 		translate([0, 0, -100]) cube([500, 500, 198], center=true);
 		translate([0, 0, 100]) cube([500, 500, 198], center=true);
 		// cut out the normal holes
 		translate([-panel_x/2, 0, -1]) dir_arc_w_30mm();
-		translate([panel_x/2, 0, -1]) sega_2p_plus_one();
+		translate([panel_x/2, 0, -1]) sega_2p_nine();
 	}
 }
 
-dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate();
+dir_arc_plus_w_30mm_and_sega_2p_nine_decorative_plate();

src/misc/decorative-plate-dir_arc-plus-w-30mm-plate.scad

@@ -1,26 +1,22 @@
-/*
+/* Decorative plate for directional buttons.
+ *
  * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
  * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
 include <parameters.scad>
 decorative_radius_scale = 1.5;
-jumbo_decorative_radius_scale = 0;
 include <components.scad>
 
-module dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate_of_plates() {
+module dir_arc_plus_w_30mm_plate_decorative_plate() {
 	difference() {
 		// get a 2mm slice of the bigger button cylinders
-		union() {
+		translate([-panel_x/2, 0, -25]) hull() dir_arc_w_30mm();
-			translate([-panel_x/2, 0, -25]) hull() dir_arc_w_30mm();
-			translate([panel_x/2, 0, -25]) hull() sega_2p_plus_one();
-		}
 		translate([0, 0, -100]) cube([500, 500, 198], center=true);
 		translate([0, 0, 100]) cube([500, 500, 198], center=true);
 		// cut out the normal holes
 		translate([-panel_x/2, 0, -1]) dir_arc_w_30mm();
-		translate([panel_x/2, 0, -1]) sega_2p_plus_one();
 	}
 }
 
-dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate_of_plates();
+dir_arc_plus_w_30mm_plate_decorative_plate();

src/misc/decorative-plate-sega-2p-eleven-plate.scad

@@ -0,0 +1,22 @@
+/* Decorative plate for directional buttons.
+ *
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+decorative_radius_scale = 1.5;
+include <components.scad>
+
+module sega_2p_eleven_plate_decorative_plate() {
+	difference() {
+		// get a 2mm slice of the bigger button cylinders
+		translate([panel_x/2, 0, -25]) hull() sega_2p_eleven();
+		translate([0, 0, -100]) cube([500, 500, 198], center=true);
+		translate([0, 0, 100]) cube([500, 500, 198], center=true);
+		// cut out the normal holes
+		translate([panel_x/2, 0, -1]) sega_2p_eleven();
+	}
+}
+
+sega_2p_eleven_plate_decorative_plate();

src/misc/decorative-plate-sega-2p-nine-plate.scad

@@ -0,0 +1,24 @@
+/* A rounded corner decorative plate for the Sega 2P + 1 button layout.
+ *
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+decorative_radius_scale = 1.5;
+include <components.scad>
+
+module sega_2p_nine_decorative_plate_of_plates() {
+	difference() {
+		// get a 2mm slice of the bigger button cylinders
+		union() {
+			translate([panel_x/2, 0, -25]) hull() sega_2p_nine();
+		}
+		translate([0, 0, -100]) cube([500, 500, 198], center=true);
+		translate([0, 0, 100]) cube([500, 500, 198], center=true);
+		// cut out the normal holes
+		translate([panel_x/2, 0, -1]) sega_2p_nine();
+	}
+}
+
+sega_2p_nine_decorative_plate_of_plates();

src/misc/decorative-plate-sega-2p-nine.scad

@@ -6,15 +6,15 @@
 include <parameters.scad>
 include <components.scad>
 
-module sega_2p_plus_one_decorative_plate() {
+module sega_2p_nine_decorative_plate() {
 	difference() {
 		// get a 2mm slice of the bigger button cylinders
-		translate([0, 0, -55]) sega_2p_plus_one();
+		translate([0, 0, -55]) sega_2p_nine();
 		translate([0, 0, -100]) cube([500, 500, 198], center=true);
 		translate([0, 0, 100]) cube([500, 500, 198], center=true);
 		// cut out the normal holes
-		translate([0, 0, -1]) sega_2p_plus_one();
+		translate([0, 0, -1]) sega_2p_nine();
 	}
 }
 
-sega_2p_plus_one_decorative_plate();
+sega_2p_nine_decorative_plate();

src/misc/decorative-plate-sega-2p.scad

@@ -0,0 +1,21 @@
+/* A decorative plate for the Sega 2P layout.
+ *
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+
+module sega_2p_decorative_plate() {
+	difference() {
+		// get a 2mm slice of the bigger button cylinders
+		translate([0, 0, -55]) sega_2p();
+		translate([0, 0, -100]) cube([500, 500, 198], center=true);
+		translate([0, 0, 100]) cube([500, 500, 198], center=true);
+		// cut out the normal holes
+		translate([0, 0, -1]) sega_2p();
+	}
+}
+
+sega_2p_decorative_plate();

src/misc/dustwasher-jlf.scad

@@ -8,9 +8,9 @@ include <components.scad>
 
 module jlf_dustwasher() {
 	difference() {
-		cylinder(r=lever_plate_hole*decorative_radius_scale, h=2, $fn=50, center=true);
+		cylinder(r=jlf_dustwasher_radius, h=2, $fn=100, center=true);
-		// 5.25 = 4.55 (diameter of shaft is 9.10mm) + .25 to let it take an angle
+		cylinder(r1=jlf_shaft_inner_radius, r2=jlf_shaft_inner_radius+shaft_position_tolerance,
-		cylinder(r=4.8, h=2.1, $fn=50, center=true);
+			h=2.001, $fn=100, center=true);
 	}
 }
 

src/misc/dustwasher-lsx-nobi.scad

@@ -8,9 +8,9 @@ include <components.scad>
 
 module lsx_nobi_dustwasher() {
 	difference() {
-		cylinder(r=lever_plate_hole*decorative_radius_scale, h=2, $fn=50, center=true);
+		cylinder(r=lsx_nobi_dustwasher_radius, h=2, $fn=100, center=true);
-		// 5.25 = 5 (diameter of shaft is 10mm) + .25 to let it take an angle
+		cylinder(r1=lsx_nobi_shaft_inner_radius, r2=lsx_nobi_shaft_inner_radius+shaft_position_tolerance,
-		cylinder(r=5.25+hole_tolerance, h=2.1, $fn=50, center=true);
+			h=2.001, $fn=100, center=true);
 	}
 }
 

src/panels/inset/dir_arc-plus-w-30mm-panel.scad

@@ -6,11 +6,11 @@
 include <parameters.scad>
 include <components.scad>
 
-module sega_2p_plus_one_panel() {
+module dir_arc_w_30mm_panel() {
 	difference() {
 		panel();
-		sega_2p_plus_one();
+		dir_arc_w_30mm();
 	}
 }
 
-sega_2p_plus_one_panel();
+dir_arc_w_30mm_panel();

src/panels/inset/sega-2p-eleven-panel-with-mount.scad

@@ -0,0 +1,16 @@
+/* 11-button Sega 2P panel with PCB mount
+ *
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <sega-2p-eleven-panel.scad>
+
+module sega_2p_eleven_panel_with_mount() {
+	sega_2p_eleven_panel();
+	translate([30, -50, -(panel_z/2) - 3]) pcb_mount();
+}
+
+sega_2p_eleven_panel_with_mount();

src/panels/inset/sega-2p-eleven-panel.scad

@@ -0,0 +1,17 @@
+/* A panel with the Sega 2P button layout plus three extra buttons for whatever purpose.
+ *
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+
+module sega_2p_eleven_panel() {
+	difference() {
+		panel();
+		sega_2p_eleven();
+	}
+}
+
+sega_2p_eleven_panel();

src/panels/inset/sega-2p-nine-panel.scad

@@ -0,0 +1,16 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+
+module sega_2p_nine_panel() {
+	difference() {
+		panel();
+		sega_2p_nine();
+	}
+}
+
+sega_2p_nine_panel();

src/panels/inset/sega-2p-nine-plus-control-panel-with-mount.scad

@@ -5,11 +5,11 @@
 
 include <parameters.scad>
 include <components.scad>
-use <right-sega-2p-plus-one-panel.scad>
+use <sega-2p-nine-plus-control-panel.scad>
 
-module sega_2p_plus_one_with_mount_right_overhang_panel() {
+module sega_2p_nine_plus_control_panel_with_mount() {
-	sega_2p_plus_one_right_overhang_panel();
+	sega_2p_nine_plus_control_panel();
 	translate([30, -50, -(panel_z/2) - 3]) pcb_mount();
 }
 
-sega_2p_plus_one_with_mount_right_overhang_panel();
+sega_2p_nine_plus_control_panel_with_mount();

src/panels/inset/sega-2p-nine-plus-control-panel.scad

@@ -6,13 +6,12 @@
 include <parameters.scad>
 include <components.scad>
 
-module sega_2p_plus_one_plus_control_panel() {
+module sega_2p_nine_plus_control_panel() {
 	difference() {
 		panel();
-		sega_2p_plus_one();
+		sega_2p_nine();
-		rotate([0, 0, 180]) side_chopper();
 		translate([89, 30, 0]) button_24mm_hole();
 	}
 }
 
-sega_2p_plus_one_plus_control_panel();
+sega_2p_nine_plus_control_panel();

src/panels/inset/sega-2p-panel.scad

@@ -0,0 +1,17 @@
+/* A top panel in the very popular Sega 2P layout.
+ *
+ * SPDX-FileCopyrightText: © 2025 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+
+module sega_2p_panel() {
+	difference() {
+		panel();
+		sega_2p();
+	}
+}
+
+sega_2p_panel();

src/panels/overhang/right-sega-2p-nine-control-panel-with-mount-with-oled.scad

@@ -5,14 +5,14 @@
 
 include <parameters.scad>
 include <components.scad>
-use <right-sega-2p-plus-one-plus-control-panel-with-mount.scad>
+use <right-sega-2p-nine-plus-control-panel-with-mount.scad>
 
-module sega_2p_plus_one_plus_control_right_overhang_panel_with_mount_with_oled() {
+module sega_2p_nine_plus_control_right_overhang_panel_with_mount_with_oled() {
 	difference() {
-		sega_2p_plus_one_plus_control_right_overhang_panel_with_mount();
+		sega_2p_nine_plus_control_right_overhang_panel_with_mount();
 		translate([75, 77.5, 0]) oled_ssd1306_mount_cutout();
 	}
 	translate([75, 77.5, 0.5]) oled_ssd1306_mount();
 }
 
-sega_2p_plus_one_plus_control_right_overhang_panel_with_mount_with_oled();
+sega_2p_nine_plus_control_right_overhang_panel_with_mount_with_oled();

src/panels/overhang/right-sega-2p-nine-panel-with-mount.scad

@@ -5,11 +5,11 @@
 
 include <parameters.scad>
 include <components.scad>
-use <sega-2p-plus-one-plus-control-panel.scad>
+use <right-sega-2p-nine-panel.scad>
 
-module sega_2p_plus_one_plus_control_panel_with_mount() {
+module sega_2p_nine_with_mount_right_overhang_panel() {
-	sega_2p_plus_one_plus_control_panel();
+	sega_2p_nine_right_overhang_panel();
 	translate([30, -50, -(panel_z/2) - 3]) pcb_mount();
 }
 
-sega_2p_plus_one_plus_control_panel_with_mount();
+sega_2p_nine_with_mount_right_overhang_panel();

src/panels/overhang/right-sega-2p-nine-panel.scad

@@ -6,12 +6,12 @@
 include <parameters.scad>
 include <components.scad>
 
-module sega_2p_plus_one_right_overhang_panel() {
+module sega_2p_nine_right_overhang_panel() {
 	difference() {
 		panel_with_raised_overhang();
-		sega_2p_plus_one();
+		sega_2p_nine();
 		rotate([0, 0, 180]) side_chopper();
 	}
 }
 
-sega_2p_plus_one_right_overhang_panel();
+sega_2p_nine_right_overhang_panel();

src/panels/overhang/right-sega-2p-nine-plus-control-panel-with-mount.scad

@@ -0,0 +1,15 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <right-sega-2p-nine-plus-control-panel.scad>
+
+module sega_2p_nine_plus_control_right_overhang_panel_with_mount() {
+	sega_2p_nine_plus_control_right_overhang_panel();
+	translate([30, -50, -(panel_z/2) - 3]) pcb_mount();
+}
+
+sega_2p_nine_plus_control_right_overhang_panel_with_mount();

src/panels/overhang/right-sega-2p-nine-plus-control-panel.scad

@@ -6,13 +6,13 @@
 include <parameters.scad>
 include <components.scad>
 
-module sega_2p_plus_one_plus_control_right_overhang_panel() {
+module sega_2p_nine_plus_control_right_overhang_panel() {
 	difference() {
 		panel_with_raised_overhang();
-		sega_2p_plus_one();
+		sega_2p_nine();
 		rotate([0, 0, 180]) side_chopper();
 		translate([89, 30, 0]) button_24mm_hole();
 	}
 }
 
-sega_2p_plus_one_plus_control_right_overhang_panel();
+sega_2p_nine_plus_control_right_overhang_panel();

src/panels/overhang/right-sega-2p-plus-one-plus-control-panel-with-mount.scad

@@ -1,15 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <right-sega-2p-plus-one-plus-control-panel.scad>
-
-module sega_2p_plus_one_plus_control_right_overhang_panel_with_mount() {
-	sega_2p_plus_one_plus_control_right_overhang_panel();
-	translate([30, -50, -(panel_z/2) - 3]) pcb_mount();
-}
-
-sega_2p_plus_one_plus_control_right_overhang_panel_with_mount();

src/parameters.scad

@@ -3,6 +3,10 @@
  * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+
+// CONNECTION POINT SIZES
+
+
 // adjustments
 hole_tolerance = 0.15;
 
@@ -17,6 +21,9 @@ m4_bolt_radius = 2 + hole_tolerance;
 m4_bolt_countersink_radius = 6.1 + hole_tolerance;
 m4_bolt_hex_exterior_radius = 3.6 + hole_tolerance;
 
+// M6
+m6_bolt_radius = 3 + hole_tolerance;
+
 // 24mm button
 small_button_radius = 12 + hole_tolerance;
 
@@ -28,24 +35,38 @@ big_button_radius = 15 + hole_tolerance;
 // radius + value below should leave space for the nut and for fingers to grab the nut
 button_radius_connector_space = 5;
 
+// standard lever hole
+lever_plate_hole = 12;
+
+// neutrik D screw holes
+neutrik_d_screw_radius = 1.6 + hole_tolerance;
+neutrik_d_radius = 12 + hole_tolerance;
+
+
+// ELEMENT DIMENSIONS
+
+
 // JLF mount dimensions
 lever_mount_x = 53;
 lever_mount_y = 95;
 lever_mount_z = 2;
 
-// standard lever hole
+// base frame box. reminder: inside top and bottom (including mounts) are chopped by panel_z for plates
-lever_plate_hole = 12;
-
-// case dimensions
-// base frame box. reminder: top of inside (including mounts) is chopped by panel_z for plates
 frame_x = 233;
 frame_y = 208;
 frame_z = 57;
 
-// stand dimensions to display a stick
+// depth of the "lip" of the frame that the top plate sets into/supports the overhang
-stand_x = 5;
+frame_wall = 4;
-stand_y = frame_z;
+
-stand_z = 15;
+// top plate, which can either be the whole plate ("inset") or the mounting frame for a plate that overhangs
+panel_x = frame_x - (frame_wall * 2);
+panel_y = frame_y - (frame_wall * 2);
+panel_z = 5;
+
+// some dimensions for frame pieces, useful in doing some intersections and chopping
+frame_piece_x_x = frame_x - (frame_wall * 2);	// essentially panel_x, yes
+frame_piece_y_y = frame_y;			// the whole y of the frame, yes
 
 // degree to which the extended frame pieces stick out from the end of the frame
 frame_extension_x = 25;
@@ -58,20 +79,12 @@ overhang_panel_bevel_height = 1;
 
 frame_center_to_neutrik = 70;
 
-// depth of the "lip" of the frame that the top plate sets into/supports the overhang
-frame_wall = 4;
-
 // width of the column in the frame corners to support the hex bolt
 frame_mount_column_width = 20;
 
 // per neutrik (mm)
 neutrik_panel_thickness = 3;
 
-// top plate, which can either be the whole plate ("inset") or the mounting frame for a plate that overhangs
-panel_x = frame_x - (frame_wall * 2);
-panel_y = frame_y - (frame_wall * 2);
-panel_z = 5;
-
 // inside the frame
 inner_frame_z = frame_z - (panel_z * 2);
 
@@ -87,21 +100,54 @@ panel_overhang_amount = 8.5;
 overhang_panel_x = panel_x + (frame_wall * 2) + (panel_overhang_amount * 2);
 overhang_panel_y = panel_y + (frame_wall * 2) + (panel_overhang_amount * 2);
 
-panel_to_frame_point_x = (panel_x/2)-10;
+panel_to_frame_point_offset = 10;
-panel_to_frame_point_y = (panel_y/2)-10;
+panel_to_frame_point_x = (panel_x/2) - panel_to_frame_point_offset;
+panel_to_frame_point_y = (panel_y/2) - panel_to_frame_point_offset;
 
 // frame interior that supports the top plates
 panel_support_width = 5;
 
-// neutrik D screw holes
-neutrik_d_screw_radius = 1.6 + hole_tolerance;
-neutrik_d_radius = 12 + hole_tolerance;
-
 // additional button radius for decorative panels, etc.
 decorative_radius_scale = 1.75;
 jumbo_decorative_radius_scale = 2;
 
+// decorative wall cutout parameters
+// thicker than the actual base wall to account for the longish pieces
+wall_cutout_depth = frame_wall * 3;
+
 // decorative slash parameters
 slash_inner_displacement = 10;
 slash_width = 15;
 slash_height = frame_z-panel_z*3;
+
+// dustwasher parameters
+jlf_dustwasher_radius = 19;
+jlf_shaft_inner_radius = 4.55;
+
+lsx_nobi_dustwasher_radius = jlf_dustwasher_radius;
+lsx_nobi_shaft_inner_radius = 5;
+
+shaft_position_tolerance = 2;
+
+// stand dimensions to display a stick
+stand_x = 5;
+stand_y = frame_z;
+stand_z = 15;
+
+
+// LAYOUTS
+
+
+sega_2p_column_2_offset = 30.5;
+sega_2p_column_3_offset = sega_2p_column_2_offset + 36;
+sega_2p_column_4_offset = sega_2p_column_3_offset + 36;
+sega_2p_column_5_offset = sega_2p_column_4_offset + 36;
+
+// this offset is from the left edge of the panel
+sega_2p_column_1_left_panel_edge_offset = 28.06;
+
+dir_arc_30mm_column_2_offset = 33.8;
+dir_arc_30mm_column_3_offset = dir_arc_30mm_column_2_offset + 34.8;
+dir_arc_30mm_row_2_offset = 57.2;
+dir_arc_30mm_row_3_offset = dir_arc_30mm_row_2_offset + 12.9;
+dir_arc_w_30mm_row_4_offset = dir_arc_30mm_row_3_offset + 34.5;