write down a thing to try if I ever get time

the horizontal move sends the dir arc closer to the edge, and the
vertical move puts the top back where it used to be before moving the
rest of the layouts down

both of these choices are entirely subjective

Makefile

@@ -1,11 +1,14 @@
-SRCDIR = ./src
-all: $(SRCDIR)/*
-	mkdir -p build
+SRC_FILES := $(wildcard ./src/*.scad)
+SRC_FILES := $(filter-out ./src/blown-up-demo.scad, $(SRC_FILES))
+SRC_FILES := $(filter-out ./src/components.scad, $(SRC_FILES))
+SRC_FILES := $(filter-out ./src/roundedcube.scad, $(SRC_FILES))
+all: $(SRC_FILES)
+	mkdir -p ./build
 	for file in $^ ; do \
 		openscad -o $${file}.stl $${file} ; \
-		mv $${file}.stl build ; \
+		mv $${file}.stl ./build/ ; \
 	done
+	zip ./build/buildable-stick-system-`git describe --dirty`-stls.zip ./build/*
 
 clean:
-	rm build/*.stl
-	rmdir build
+	rm -rf ./build

README.md

@@ -2,7 +2,13 @@
 
 Files for 3D printing an arcade stick.
 
-![An example of stick components displayed in OpenSCAD](docs/three-panel-example.png)
+![An example of stick components displayed in OpenSCAD](docs/two-panel-example-v3.png)
+
+[OpenSCAD-based illustration of how the components for an overhang panel-based stick fit together.]
+
+![A photo of a completed stick](docs/finished-v3.1.jpg)
+
+[Photo of a completed inset panel-based stick.]
 
 Originally an attempt to make a couple customized STL files for the [OpenStickCommunity Fightstick
 Case](https://github.com/OpenStickCommunity/Hardware/tree/main/Fightstick%20Case), the changes ballooned to fit my
@@ -30,29 +36,60 @@ What you'll need beyond these objects:
   Board](https://github.com/OpenStickCommunity/Hardware/tree/main/RP2040%20Advanced%20Breakout%20Board))
     * 4 M3 8mm hex bolts to secure the PCB to a panel
 * Per frame and plate combo:
-    * 4 40mm M4 hex brass standoffs
-    * 8 12-16mm M4 countersunk hex bolts
+    * 4 40mm M4 hex brass standoffs (or equivalent)
+    * 8 M4 countersunk hex bolts
+        * Overhang plates should use 12-16mm length bolts since they are taller
+        * Inset plates should probably use 8-12mm bolts --- some standoffs aren't threaded the whole way, making 16mm
+          too long to go flush
+        * If making the 40mm standoffs from multiple smaller ones, make sure they have enough length to take your bolts!
 * Per frame connection point:
-    * 8 25mm M4 bolts
+    * 8 16mm M4 bolts
     * 8 M4 flange nuts
 * For a lever:
     * 4 12-16mm M4 countersunk hex bolts
     * 4 M4 flange nuts
+* For Neutrik D connections:
+    * 2 10mm M3 hex bolts
+    * 2 M3 flange nuts
 * Buttons and levers as desired
 * Wiring as required
 
-### Issues and Limitations
+## Rough Costs
 
-This is a living repository, and as such, there are likely issues with the objects, known or otherwise. Be aware:
+This is a rough estimate of the cost to produce one of these sticks, assuming a usual 2-frame design and layout.
+Filament masses from Bambu Studio estimates, using Bambu PLA Basic.
 
-* The top panel is 5mm tall and doesn't have an inset; snap-in buttons likely do not fit.
-* A composition error made the frame 5mm shorter than intended and wasn't noticed until I printed everything:
-    * Some levers don't have enough clearance in the case.
-    * Buttons with traditional quick connects are a *very* tight fit, you will probably need to bend pins.
-* The PCB mount position was very tight on the buttons panel; it will probably have to be moved.
-* Support for the top plate was removed from the frame due to overhang issues, and now the top plate can bow slightly
-  with pressure; a new solution needs to be found.
+* Left and right frame: **$7.08 USD** (141.84g each, as of 2023-09-12)
+* Left and right (overhang) top panels: **~$6.74 USD** (~135g each, as of 2023-09-12)
+* Left and right (overhang) bottom panels: **$5.90 USD** (118.16g each, as of 2023-09-12)
+* Miscellaneous mounting plates, decorative plates, etc.: **~$1.00 USD** (~40g, as of 2023-09-12)
+* 8 16mm M4 bolts to connect the frames: **$0.72 USD** (you can get a pack of 100 on Amazon for $9, as of 2023-09-12)
+* 8 M4 flange nuts to connect the frames: **$0.68 USD** (you can get a pack of 100 on Amazon for $8.50, as of 2023-09-12)
+* 4 10mm M3 bolts to connect Neutrik D plates to frames: **$0.40 USD** (you can get a pack of 100 on Amazon for $10, as
+  of 2023-09-12)
+* 4 M3 flange nuts to connect Neutrik D plates to frames: **$0.34 USD** (you can get a pack of 100 on Amazon for $8.50,
+  as of 2023-09-12)
+* 8 40mm M4 spacers to connect panels to frames: **$2.40 USD** (you can get a pack of 10 on AliExpress for $3, as of
+  2023-09-12)
+    * You could 3D print these too, but you're probably better off with brass ones as they give some weight to the
+      stick anyway
+    * You can also use a shorter length with longer bolts, or combine multiple spacers, if either of those yield better
+      prices
+* 8 16mm M4 bolts to connect top plates to frames: **$0.72 USD** (you can get a pack of 100 on Amazon for $9, as of
+* 8 12mm M4 bolts to connect bottom plates to frames: **$0.72 USD** (you can get a pack of 100 on Amazon for $9, as of
+  2023-09-12)
 
+With an enclosure coming in around $26, depending on your choices --- say, ~$30 for TheTrain's RP2040 Advanced Breakout
+Board, ~$60 for Sanwa buttons and a lever, and ~$20 for miscellaneous connectors and wiring --- you can put a
+full-featured controller with an open source foundation together for around $135.
+
+## Miscellany
+
+See the `/docs/` directory for more thoughts too scattered for this document.
+
+## Issues and Limitations
+
+This is a living repository, and as such, there are likely issues with the objects, known or otherwise.
 These issues may be fixed in the future; see `TODO.md` for details.
 
 ## Development and Contributing

TODO.md

@@ -2,17 +2,10 @@
 
 Notes for "next time".
 
-## v2
+## v4
 
-* I need at least 5mm, maybe 10mm, more height, to fit some of my levers like the Nobi Bullet
-    * I couldn't even fit a JLF without the compensations in v1 on the bottom panel
-    * I had to bend the pins a bit on Crown SDB-202s, too
-* Top plates are 1-2mm too thick for snap-ins, maybe have a variant with a couple shaved off like with the bottom plate
-  workaround
-* The plates bow a bit on the top when pressure is applied, because there's no support from the frame up there ---
-  adding 5mm to the frame should leave a couple mm for support to get added back
-* PCB mount on `top-panel-dir_arc-plus-w-30mm-plus-one-with-mount.scad` doesn't leave room for a USB cable on the right
-  hand side
-* The panels' connection points could probably be a bit thinner to accommodate more bolts. A 20mm bolt barely clears the
-  two panels and I don't like that kind of bolt connection.
 * Engraving some cosmetic stuff? Or maybe a place to mount other plates?
+* Try making it so top plates are bolted in from the side of the frame rather than the top
+    * I'm thinking of abandoning this, because it makes the frame more complicated to have a portion of a column rather
+      than the full column, but I'll keep it here for a bit longer
+* Try making frames out of four pieces connected at joints on the hex posts, rather than one large piece?

docs/materials.md

@@ -0,0 +1,24 @@
+# Materials
+
+bss's random thoughts and notes on 3D printing materials.
+
+## Bambu Lab PLA
+
+### Basic
+
+* In general, nice texture, but under direct light, you can see a bit of the infill pattern through the walls. Not super
+  distracting, but it's there.
+
+#### White
+
+* Walls are practically translucent, you can almost always see the infill. Do not use for major components.
+* Looks perfectly good for thin things like the Neutrik plates, decorative pieces, that kind of thing.
+
+### Matte
+
+* I don't like the texture as much, but they do produce nice non-primary color colorways, and you don't see the infill.
+* Seems like their plastic treatment leaves some plate residue, so be better about cleaning it or you'll get ghosts.
+
+## Hatchbox PLA
+
+* Haven't done a lot of this yet, but my wife really likes the blue.

src/blown-up-demo.scad

@@ -0,0 +1,39 @@
+/* Copyright Brian Stephan 2023
+ *
+ * This file is part of the Buildable Stick System.
+ *
+ * The Buildable Stick System is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 3 of the License, or (at your
+ * option) any later version.
+ *
+ * The Buildable Stick System is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+ */
+
+include <components.scad>
+use <frame-left.scad>
+use <frame-right.scad>
+use <top-panel-left-lever-and-dir_arc-plus-w-30mm.scad>
+use <top-panel-right-sega-2p-plus-one-plus-control-with-mount.scad>
+use <bottom-panel-left.scad>
+use <bottom-panel-right.scad>
+use <misc-decorative-plate-24mm-button.scad>
+use <misc-decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one.scad>
+use <misc-dustwasher-lsx-nobi.scad>
+
+color("#C12E1F") translate([-top_plate_x/2-25, 0, frame_z/2+75]) top_panel_left_lever_and_dir_arc_w_30mm();
+color("#C12E1F") translate([top_plate_x/2+25, 0, frame_z/2+75]) top_panel_right_sega_2p_plus_one_plus_control_with_mount();
+color("black") translate([-frame_x/2+5-25, 0, -2.5]) left_frame();
+color("black") translate([frame_x/2+25, 0, -2.5]) right_frame();
+color("#C12E1F") translate([-top_plate_x/2-25, 0, -5-frame_z/2-75]) bottom_panel_left();
+color("#C12E1F") translate([top_plate_x/2+25, 0, -5-frame_z/2-75]) bottom_panel_right();
+
+color("black") translate([0, 0, 3+frame_z/2+150]) dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate();
+color("black") translate([-195, 25, 3+frame_z/2+150]) lsx_nobi_dustwasher();
+color("black") translate([top_plate_x, 25, 3+frame_z/2+150]) button_24mm_decorative_plate();

src/bottom-panel-inset.scad

@@ -0,0 +1,28 @@
+/* Copyright Brian Stephan 2023
+ *
+ * This file is part of the Buildable Stick System.
+ *
+ * The Buildable Stick System is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 3 of the License, or (at your
+ * option) any later version.
+ *
+ * The Buildable Stick System is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+ */
+
+include <components.scad>
+
+module bottom_panel() {
+	difference() {
+		mirror([0, 0, 1]) topplate();
+		translate([0, 0, top_plate_z/2]) cube([top_plate_x-40, top_plate_y-40, top_plate_z], center=true);
+	}
+}
+
+bottom_panel();

src/bottom-panel-left.scad

@@ -0,0 +1,30 @@
+/* Copyright Brian Stephan 2023
+ *
+ * This file is part of the Buildable Stick System.
+ *
+ * The Buildable Stick System is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 3 of the License, or (at your
+ * option) any later version.
+ *
+ * The Buildable Stick System is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+ */
+
+include <components.scad>
+use <bottom-panel-solo.scad>
+
+module bottom_panel_left() {
+	difference() {
+		bottom_panel_solo();
+		// chop the right edge off
+		side_chopper();
+	}
+}
+
+bottom_panel_left();

src/bottom-panel-middle.scad

@@ -0,0 +1,30 @@
+/* Copyright Brian Stephan 2023
+ *
+ * This file is part of the Buildable Stick System.
+ *
+ * The Buildable Stick System is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 3 of the License, or (at your
+ * option) any later version.
+ *
+ * The Buildable Stick System is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+ */
+
+include <components.scad>
+use <bottom-panel-left.scad>
+use <bottom-panel-right.scad>
+
+module bottom_panel_middle() {
+	intersection() {
+		bottom_panel_left();
+		bottom_panel_right();
+	}
+}
+
+bottom_panel_middle();

src/bottom-panel-right.scad

@@ -17,9 +17,10 @@
  */
 
 include <components.scad>
+use <bottom-panel-left.scad>
 
-module bottom_panel() {
-	mirror([0, 0, 1]) topplate();
+module bottom_panel_right() {
+	rotate([0, 0, 180]) bottom_panel_left();
 }
 
-bottom_panel();
+bottom_panel_right();

src/bottom-panel-solo.scad

@@ -17,13 +17,12 @@
  */
 
 include <components.scad>
-use <bottom-panel.scad>
 
-module bottom_panel_concave() {
+module bottom_panel_solo() {
 	difference() {
-		bottom_panel();
-		translate([0, 0, top_plate_z/2]) cube([top_plate_x*2/3, top_plate_y*2/3, top_plate_z], center=true);
+		bottom_plate_with_overhang();
+		translate([0, 0, top_plate_z/2]) cube([top_plate_x-40, top_plate_y-40, top_plate_z], center=true);
 	}
 }
 
-bottom_panel_concave();
+bottom_panel_solo();

src/components.scad

@@ -23,6 +23,9 @@ include <roundedcube.scad>
 // adjustments
 hole_tolerance = 0.15;
 
+// M2
+m2_screw_selftap_radius = 0.95;
+
 // M3
 m3_screw_selftap_radius = 1.3;
 
@@ -43,17 +46,42 @@ lever_mount_y = 95;
 lever_mount_z = 2;
 
 // case dimensions
-frame_x = 183;
+// base frame box. reminder: top of inside (including mounts) is chopped by top_plate_z for plates
+frame_x = 233;
 frame_y = 208;
-frame_z = 45;			// reminder: inside (including mounts) is chopped by top_plate_z for plates
-top_plate_x = 175;
-top_plate_y = 200;
+frame_z = 50;
+
+// depth of the "lip" of the frame that the top plate sets into/supports the overhang
+frame_wall = 8;
+
+// per neutrik (mm)
+neutrik_panel_thickness = 3;
+
+// top plate, which can either be the whole plate ("inset") or the mounting frame for a plate that overhangs
+top_plate_x = frame_x - frame_wall;
+top_plate_y = frame_y - frame_wall;
 top_plate_z = 5;
 
+// how much the top plate x/y is expanded to overhang the frame
+// note that this is relative to the top plate (so the wall is added back)
+top_plate_overhang_amount = frame_wall + 17;
+overhang_top_plate_x = top_plate_x + top_plate_overhang_amount;
+overhang_top_plate_y = top_plate_y + top_plate_overhang_amount;
+
+plate_to_frame_point_x = (top_plate_x/2)-10;
+plate_to_frame_point_y = (top_plate_y/2)-10;
+
+// frame interior that supports the top plates
+panel_support_width = 5;
+
 // neutrik D screw holes
 neutrik_d_screw_radius = 1.6 + hole_tolerance;
 neutrik_d_radius = 12 + hole_tolerance;
 
+// additional button radius for decorative panels, etc.
+decorative_radius_scale = 1.75;
+jumbo_decorative_radius_scale = 2;
+
 /* PARTS */
 
 module m4_hole() {
@@ -64,12 +92,43 @@ module m4_hole_countersink() {
 	cylinder(r1=m4_bolt_radius, r2=m4_bolt_countersink_radius, h=3.2, $fn=50, center=true);
 }
 
-module button_24mm_hole() {
-	cylinder(r=small_button_radius, h=100, $fn=50, center=true);
+module top_plate_holes() {
+	// holes for mount bolts
+	translate([plate_to_frame_point_x, plate_to_frame_point_y, 0]) m4_hole();
+	translate([plate_to_frame_point_x, -plate_to_frame_point_y, 0]) m4_hole();
+	translate([-plate_to_frame_point_x, plate_to_frame_point_y, 0]) m4_hole();
+	translate([-plate_to_frame_point_x, -plate_to_frame_point_y, 0]) m4_hole();
+	// holes for mount bolt countersinks
+	translate([plate_to_frame_point_x, plate_to_frame_point_y, 2]) m4_hole_countersink();
+	translate([plate_to_frame_point_x, -plate_to_frame_point_y, 2]) m4_hole_countersink();
+	translate([-plate_to_frame_point_x, plate_to_frame_point_y, 2]) m4_hole_countersink();
+	translate([-plate_to_frame_point_x, -plate_to_frame_point_y, 2]) m4_hole_countersink();
 }
 
+// button hole, with extra wide bits for various uses (cutting out space
+// for snap-ins, etc.
+module button_24mm_hole() {
+	cylinder(r=small_button_radius, h=100, $fn=50, center=true);
+	// carve out space for snap-ins, leave 3mm
+	// slagcoin has screw-in nut diameter at 29.5mm, so radius+6 to leave some space
+	// translation is to leave 3mm thickness in the plate without recentering anything
+	translate([0, 0, -25]) cylinder(r=small_button_radius+6, h=49, $fn=50, center=true);
+	// space for decorative button surround stuff
+	translate([0, 0, 50]) cylinder(r=small_button_radius*decorative_radius_scale, h=20, $fn=50, center=true);
+	translate([0, 0, 70]) cylinder(r=small_button_radius*jumbo_decorative_radius_scale, h=20, $fn=50, center=true);
+}
+
+// button hole, with extra wide bits for various uses (cutting out space
+// for snap-ins, etc.
 module button_30mm_hole() {
 	cylinder(r=big_button_radius, h=100, $fn=50, center=true);
+	// carve out space for snap-ins, leave 3mm
+	// slagcoin has screw-in nut diameter at 36mm, so radius+6 to leave some space
+	// translation is to leave 3mm thickness in the plate without recentering anything
+	translate([0, 0, -25]) cylinder(r=big_button_radius+6, h=49, $fn=50, center=true);
+	// space for decorative button surround stuff
+	translate([0, 0, 50]) cylinder(r=big_button_radius*decorative_radius_scale, h=20, $fn=50, center=true);
+	translate([0, 0, 70]) cylinder(r=big_button_radius*jumbo_decorative_radius_scale, h=20, $fn=50, center=true);
 }
 
 module frame_hex_bolt_hole() {
@@ -94,6 +153,30 @@ module neutrik_d_mount() {
 	translate([-9.5, -12, 0]) neutrik_d_screw_hole();
 }
 
+// space for a neutrik D mount or 24mm button
+module frame_cutout() {
+	cube([36.5, 8, 40], center=true);
+}
+
+module m2_mount_post() {
+	difference() {
+		cylinder(r=m2_screw_selftap_radius*2.25, h=3, $fn=6, center=true);
+		cylinder(r=m2_screw_selftap_radius, h=3*2, $fn=50, center=true);
+	}
+}
+
+module oled_ssd1306_mount() {
+	translate([11.5, 12, 0]) m2_mount_post();
+	translate([11.5, -12, 0]) m2_mount_post();
+	translate([-11.5, 12, 0]) m2_mount_post();
+	translate([-11.5, -12, 0]) m2_mount_post();
+}
+
+module oled_ssd1306_mount_cutout() {
+	translate([0, 1.9, 0]) cube([25, 14, 5], center=true);
+	translate([0, 0, -1.0]) cube([35, 35, 4], center=true);
+}
+
 module m3_mount_post() {
 	difference() {
 		cylinder(r=m3_screw_selftap_radius*4, h=8, $fn=6, center=true);
@@ -148,34 +231,49 @@ module base_topplate() {
 	cube([top_plate_x, top_plate_y, top_plate_z], center=true);
 }
 
+module overhang_plate() {
+	roundedcube([overhang_top_plate_x, overhang_top_plate_y, top_plate_z], center=true, radius=1);
+}
+
+// this takes the base_topplate and makes it a small frame, putting a larger top plate
+module base_top_plate_with_raised_overhang() {
+	// make a frame out of the top plate (and keep the main plate on the center plane)
+	translate([0, 0, -5]) difference() {
+		base_topplate();
+		cube([top_plate_x-(panel_support_width*2), top_plate_y-(panel_support_width*2), top_plate_z*2], center=true);
+	}
+	translate([plate_to_frame_point_x, plate_to_frame_point_y, -2.5]) resize([0, 0, 10]) frame_mount_column();
+	translate([-(plate_to_frame_point_x), plate_to_frame_point_y, -2.5]) resize([0, 0, 10]) frame_mount_column();
+	translate([plate_to_frame_point_x, -(plate_to_frame_point_y), -2.5]) resize([0, 0, 10]) frame_mount_column();
+	translate([-(plate_to_frame_point_x), -(plate_to_frame_point_y), -2.5]) resize([0, 0, 10]) frame_mount_column();
+	overhang_plate();
+}
+
 module topplate() {
 	difference() {
 		base_topplate();
-		// holes for mount bolts
-		translate([77.5, 90, 0])
-			m4_hole();
-		translate([77.5, -90, 0])
-			m4_hole();
-		translate([-77.5, 90, 0])
-			m4_hole();
-		translate([-77.5, -90, 0])
-			m4_hole();
-		// holes for mount bolt countersinks
-		translate([77.5, 90, 2])
-			m4_hole_countersink();
-		translate([77.5, -90, 2])
-			m4_hole_countersink();
-		translate([-77.5, 90, 2])
-			m4_hole_countersink();
-		translate([-77.5, -90, 2])
-			m4_hole_countersink();
+		top_plate_holes();
+	}
+}
+
+module bottom_plate_with_overhang() {
+	difference() {
+		rotate([180, 0, 0]) base_top_plate_with_raised_overhang();
+		rotate([180, 0, 0]) top_plate_holes();
+	}
+}
+
+module top_plate_with_raised_overhang() {
+	difference() {
+		base_top_plate_with_raised_overhang();
+		top_plate_holes();
 	}
 }
 
 module frame_box() {
 	difference() {
 		roundedcube([frame_x, frame_y, frame_z], center=true, radius=3);
-		cube([frame_x-26, frame_y-26, frame_z+5], center=true);
+		cube([top_plate_x-(panel_support_width*2), top_plate_y-(panel_support_width*2), frame_z+5], center=true);
 	}
 }
 
@@ -183,20 +281,20 @@ module frame_mount_column() {
 	cube([20, 20, frame_z], center=true);
 }
 
-module frame_side_chopper() {
-	translate([frame_x/2, 0, 0]) cube([8, 2*(frame_y+top_plate_y), 2*(frame_z+top_plate_z)], center=true);
+module side_chopper() {
+	translate([frame_x/2+4, 0, 0]) cube([16, 2*(frame_y+top_plate_y), 2*(frame_z+top_plate_z)], center=true);
 }
 
 module frame_connection_holes() {
-	translate([frame_x/2, (frame_y/4)+10, (frame_z/4)]) rotate([0, 90, 0]) m4_hole();
-	translate([frame_x/2, (frame_y/4)+10, -(frame_z/4)]) rotate([0, 90, 0]) m4_hole();
-	translate([frame_x/2, (frame_y/4)-10, (frame_z/4)]) rotate([0, 90, 0]) m4_hole();
-	translate([frame_x/2, (frame_y/4)-10, -(frame_z/4)]) rotate([0, 90, 0]) m4_hole();
+	translate([frame_x/2, (frame_y/4)+15, (frame_z/4)]) rotate([0, 90, 0]) m4_hole();
+	translate([frame_x/2, (frame_y/4)+15, -(frame_z/4)]) rotate([0, 90, 0]) m4_hole();
+	translate([frame_x/2, (frame_y/4)-15, (frame_z/4)]) rotate([0, 90, 0]) m4_hole();
+	translate([frame_x/2, (frame_y/4)-15, -(frame_z/4)]) rotate([0, 90, 0]) m4_hole();
 
-	translate([frame_x/2, -((frame_y/4)+10), (frame_z/4)]) rotate([0, 90, 0]) m4_hole();
-	translate([frame_x/2, -((frame_y/4)+10), -(frame_z/4)]) rotate([0, 90, 0]) m4_hole();
-	translate([frame_x/2, -((frame_y/4)-10), (frame_z/4)]) rotate([0, 90, 0]) m4_hole();
-	translate([frame_x/2, -((frame_y/4)-10), -(frame_z/4)]) rotate([0, 90, 0]) m4_hole();
+	translate([frame_x/2, -((frame_y/4)+15), (frame_z/4)]) rotate([0, 90, 0]) m4_hole();
+	translate([frame_x/2, -((frame_y/4)+15), -(frame_z/4)]) rotate([0, 90, 0]) m4_hole();
+	translate([frame_x/2, -((frame_y/4)-15), (frame_z/4)]) rotate([0, 90, 0]) m4_hole();
+	translate([frame_x/2, -((frame_y/4)-15), -(frame_z/4)]) rotate([0, 90, 0]) m4_hole();
 }
 
 module frame_cable_routing_hole() {
@@ -205,56 +303,91 @@ module frame_cable_routing_hole() {
 
 module base_frame() {
 	frame_box();
-	translate([(top_plate_x/2)-10, (top_plate_y/2)-10, 0])
-		frame_mount_column();
-	translate([-((top_plate_x/2)-10), (top_plate_y/2)-10, 0])
-		frame_mount_column();
-	translate([(top_plate_x/2)-10, -((top_plate_y/2)-10), 0])
-		frame_mount_column();
-	translate([-((top_plate_x/2)-10), -((top_plate_y/2)-10), 0])
-		frame_mount_column();
+	translate([plate_to_frame_point_x, plate_to_frame_point_y, 0]) frame_mount_column();
+	translate([-plate_to_frame_point_x, plate_to_frame_point_y, 0]) frame_mount_column();
+	translate([plate_to_frame_point_x, -(plate_to_frame_point_y), 0]) frame_mount_column();
+	translate([-plate_to_frame_point_x, -(plate_to_frame_point_y), 0]) frame_mount_column();
 }
 
 module frame() {
 	difference() {
 		base_frame();
 		translate([0, 0, frame_z/2]) scale([1, 1, 2]) base_topplate();
-		translate([(top_plate_x/2)-10, (top_plate_y/2)-10, 0])
-			frame_hex_bolt_hole();
-		translate([-((top_plate_x/2)-10), (top_plate_y/2)-10, 0])
-			frame_hex_bolt_hole();
-		translate([(top_plate_x/2)-10, -((top_plate_y/2)-10), 0])
-			frame_hex_bolt_hole();
-		translate([-((top_plate_x/2)-10), -((top_plate_y/2)-10), 0])
-			frame_hex_bolt_hole();
-
-		// thin up the mount point to accommodate snap-ins, ethercon adapter
-		translate([0, 10, 10]) cube([120, 180, 60], center=true);
+		translate([0, 0, -frame_z/2]) scale([1, 1, 2]) base_topplate();
+		translate([plate_to_frame_point_x, plate_to_frame_point_y, 0]) frame_hex_bolt_hole();
+		translate([-plate_to_frame_point_x, plate_to_frame_point_y, 0]) frame_hex_bolt_hole();
+		translate([plate_to_frame_point_x, -plate_to_frame_point_y, 0]) frame_hex_bolt_hole();
+		translate([-plate_to_frame_point_x, -plate_to_frame_point_y, 0]) frame_hex_bolt_hole();
 	}
 }
 
 /* LAYOUTS */
 
-module dir_arc_30mm_button_l() {
-	translate([68, 132, 0]) button_30mm_hole();
+// Directional Arc (both hands)
+
+module dir_arc_24mm_directionals() {
+	button_24mm_hole();
+	translate([29.5, 0, 0]) button_24mm_hole();
+	translate([29.5+26.3, -12.9, 0]) button_24mm_hole();
+	translate([29.5+26.3+15.5, -65.2, 0]) button_30mm_hole();
+}
+
+module dir_arc_24mm_6_button() {
+	dir_arc_24mm_directionals();
+	translate([29.5+26.3+27.8, 0, 0]) button_24mm_hole();
+	translate([29.5+26.3+27.8+26.9, 10.9, 0]) button_24mm_hole();
+	translate([29.5+26.3+27.8+26.9+29.6, 10.9, 0]) button_24mm_hole();
+	translate([29.5+26.3+15.5+9.7, -29.4, 0]) button_24mm_hole();
+	translate([29.5+26.3+27.8+26.9-1.7, 10.9-30.1, 0]) button_24mm_hole();
+	translate([29.5+26.3+27.8+26.9+29.6-0.2, 10.9-30.1, 0]) button_24mm_hole();
+}
+
+module dir_arc_24mm_8_button() {
+	dir_arc_24mm_6_button();
+	translate([29.5+26.3+27.8+26.9+29.6+29.5, 7.1, 0]) button_24mm_hole();
+	translate([29.5+26.3+27.8+26.9+29.6+29.5-0.3, -23.9, 0]) button_24mm_hole();
+}
+
+// 6 button plus the normal fourth column for 8 button actually on a third row
+module dir_arc_24mm_8_button_compressed() {
+	dir_arc_24mm_6_button();
+	translate([29.5+26.3+27.8+2.6, 29.4, 0]) button_24mm_hole();
+	translate([29.5+26.3+27.8+26.9+2.6, 40.3, 0]) button_24mm_hole();
+}
+
+module dir_arc_plus_w_24mm_8_button() {
+	dir_arc_24mm_8_button();
+	translate([36, 28, 0]) button_24mm_hole();
+}
+
+// Directional Arc (left hand)
+
+module dir_arc_30mm_thumb_button() {
+	// just my guesstimate on this one, but note that this is the same position as sega 2p (just mirrored)
+	translate([(top_plate_x/2)-28.06, (-top_plate_y/2)+62, 0]) button_30mm_hole();
+}
+
+module dir_arc_30mm() {
+	dir_arc_30mm_thumb_button();
+	translate([0, 57.2, 0]) dir_arc_30mm_thumb_button();
+	translate([-33.8, 57.2+12.9, 0]) dir_arc_30mm_thumb_button();
+	translate([-33.8-34.8, 57.2+12.9, 0]) dir_arc_30mm_thumb_button();
 }
 
 module dir_arc_w_30mm() {
-	dir_arc_30mm_button_l();
-	translate([35, 0, 0]) dir_arc_30mm_button_l();
-	translate([35+33.5, -12.9, 0]) dir_arc_30mm_button_l();
-	translate([35+7, 34.5, 0]) dir_arc_30mm_button_l();
-	// just my guesstimate on this one, but note that this is the same position as sega 2p (just mirrored)
-	translate([top_plate_x-33.06, 145-19-9-11-19-9-11, 0]) button_30mm_hole();
+	dir_arc_30mm();
+	translate([-26.8, 57.2+12.9+34.5, 0]) dir_arc_30mm_thumb_button();
 }
 
 module dir_arc_w_30mm_plus_one() {
 	dir_arc_w_30mm();
-	translate([-33.5, -12.9, 0]) dir_arc_30mm_button_l();
+	translate([-33.8-34.8-33.8, 57.2, 0]) dir_arc_30mm_thumb_button();
 }
 
+// Namco Noir (right hand)
+
 module noir_button_p1() {
-	translate([40, 145, 0]) button_30mm_hole();
+	translate([-top_plate_x/2, -top_plate_y/2, 0]) translate([35, 140, 0]) button_30mm_hole();
 }
 
 module noir_plus_one() {
@@ -272,21 +405,30 @@ module noir_plus_one() {
 	translate([-3.47-3.47, -78, 0]) noir_button_p1();
 }
 
+// Sega Astro City 2P (right hand)
+
 module sega_2p_p1() {
-	translate([33.06, 145, 0]) button_30mm_hole();
+	translate([-top_plate_x/2, -top_plate_y/2, 0]) translate([28.06, 140, 0]) button_30mm_hole();
 }
 
-module sega_2p_plus_one() {
+module sega_2p_6_button() {
 	// via slagcoin
 	sega_2p_p1();
 	translate([30.5, 11+9, 0]) sega_2p_p1();
 	translate([30.5+36, 11+9, 0]) sega_2p_p1();
-	translate([30.5+36+36, 11, 0]) sega_2p_p1();
 	translate([0, -19-9-11, 0]) sega_2p_p1();
 	translate([30.5, -19, 0]) sega_2p_p1();
 	translate([30.5+36, -19, 0]) sega_2p_p1();
-	translate([30.5+36+36, -19-9, 0]) sega_2p_p1();
+}
 
-	// just my guesstimate on this one, but note that this is the same position as sega 2p
+module sega_2p() {
+	sega_2p_6_button();
+	translate([30.5+36+36, 11, 0]) sega_2p_p1();
+	translate([30.5+36+36, -19-9, 0]) sega_2p_p1();
+}
+
+module sega_2p_plus_one() {
+	sega_2p();
+	// just my guesstimate on this one
 	translate([0, -19-9-11-19-9-11, 0]) sega_2p_p1();
 }

src/frame-left.scad

@@ -22,7 +22,7 @@ module base_left_frame() {
 	difference() {
 		frame();
 		// chop the right edge off
-		frame_side_chopper();
+		side_chopper();
 	}
 }
 
@@ -30,15 +30,22 @@ module left_frame() {
 	difference() {
 		base_left_frame();
 		// connection holes to other frames
-		translate([0, 0, -top_plate_z/2]) frame_connection_holes();
+		frame_connection_holes();
 
 		// cable routing hole
-		translate([0, 0, -top_plate_z/2]) frame_cable_routing_hole();
+		frame_cable_routing_hole();
 
 		// aux button holes
-		translate([0, 100, 0]) rotate([90, 0, 0]) button_24mm_hole();
-		translate([-40, 100, 0]) rotate([90, 0, 0]) button_24mm_hole();
-		translate([40, 100, 0]) rotate([90, 0, 0]) button_24mm_hole();
+		translate([-30, 101.5, 0]) rotate([270, 0, 0]) button_24mm_hole();
+		translate([-30, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
+		translate([-70, 101.5, 0]) rotate([270, 0, 0]) button_24mm_hole();
+		translate([-70, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
+		translate([10, 101.5, 0]) rotate([270, 0, 0]) button_24mm_hole();
+		translate([10, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
+
+		// neutrix button hole
+		translate([70, (frame_y/2)-neutrik_panel_thickness, 0]) rotate([90, 0, 0]) neutrik_d_mount();
+		translate([70, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
 	}
 }
 

src/frame-middle.scad

@@ -22,8 +22,8 @@ module base_middle_frame() {
 	difference() {
 		frame();
 		// chop the left and right edge off
-		frame_side_chopper();
-		mirror([1, 0, 0]) frame_side_chopper();
+		side_chopper();
+		mirror([1, 0, 0]) side_chopper();
 	}
 }
 
@@ -31,17 +31,20 @@ module middle_frame() {
 	difference() {
 		base_middle_frame();
 		// connection holes to other frames
-		translate([0, 0, -top_plate_z/2]) frame_connection_holes();
-		translate([0, 0, -top_plate_z/2]) mirror([1, 0, 0]) frame_connection_holes();
+		frame_connection_holes();
+		mirror([1, 0, 0]) frame_connection_holes();
 
 		// cable routing holes
-		translate([0, 0, -top_plate_z/2]) frame_cable_routing_hole();
-		translate([0, 0, -top_plate_z/2]) mirror([1, 0, 0]) frame_cable_routing_hole();
+		frame_cable_routing_hole();
+		mirror([1, 0, 0]) frame_cable_routing_hole();
 
 		// neutrik mounts for connector, switches
-		translate([0, 100, 0]) rotate([90, 0, 0]) neutrik_d_mount();
-		translate([-40, 100, 0]) rotate([90, 0, 0]) neutrik_d_mount();
-		translate([40, 100, 0]) rotate([90, 0, 0]) neutrik_d_mount();
+		translate([0, (frame_y/2)-neutrik_panel_thickness, 0]) rotate([90, 0, 0]) neutrik_d_mount();
+		translate([0, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
+		translate([-40, (frame_y/2)-neutrik_panel_thickness, 0]) rotate([90, 0, 0]) neutrik_d_mount();
+		translate([-40, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
+		translate([40, (frame_y/2)-neutrik_panel_thickness, 0]) rotate([90, 0, 0]) neutrik_d_mount();
+		translate([40, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
 	}
 }
 

src/frame-right.scad

@@ -17,10 +17,36 @@
  */
 
 include <components.scad>
-use <frame-left.scad>
+
+module base_right_frame() {
+	difference() {
+		frame();
+		// chop the left edge off
+		mirror([1, 0, 0]) side_chopper();
+	}
+}
 
 module right_frame() {
-	mirror([1, 0, 0]) left_frame();
+	difference() {
+		base_right_frame();
+		// connection holes to other frames
+		mirror([1, 0, 0]) frame_connection_holes();
+
+		// cable routing hole
+		mirror([1, 0, 0]) frame_cable_routing_hole();
+
+		// aux button holes
+		translate([30, 101.5, 0]) rotate([270, 0, 0]) button_24mm_hole();
+		translate([30, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
+		translate([70, 101.5, 0]) rotate([270, 0, 0]) button_24mm_hole();
+		translate([70, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
+		translate([-10, 101.5, 0]) rotate([270, 0, 0]) button_24mm_hole();
+		translate([-10, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
+
+		// neutrix button hole
+		translate([-70, (frame_y/2)-neutrik_panel_thickness, 0]) rotate([90, 0, 0]) neutrik_d_mount();
+		translate([-70, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
+	}
 }
 
 right_frame();

src/frame-solo.scad

@@ -0,0 +1,55 @@
+/* Copyright Brian Stephan 2023
+ *
+ * This file is part of the Buildable Stick System.
+ *
+ * The Buildable Stick System is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 3 of the License, or (at your
+ * option) any later version.
+ *
+ * The Buildable Stick System is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+ */
+
+include <components.scad>
+
+module solo_frame() {
+	difference() {
+		frame();
+
+		// neutrik mounts for connector, switches
+		translate([0, (frame_y/2)-2.5, 0]) rotate([90, 0, 0]) neutrik_d_mount();
+		translate([0, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
+		translate([-40, (frame_y/2)-2.5, 0]) rotate([90, 0, 0]) neutrik_d_mount();
+		translate([-40, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
+		translate([40, (frame_y/2)-2.5, 0]) rotate([90, 0, 0]) neutrik_d_mount();
+		translate([40, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
+
+		// aux button holes
+		translate([-frame_x/2+2.5, 0, 0]) rotate([0, 0, 270])
+			translate([0, 0, 0]) rotate([90, 0, 0]) button_24mm_hole();
+		translate([(frame_x/2)-neutrik_panel_thickness-4, 0, 0]) rotate([0, 0, 90]) frame_cutout();
+		translate([-frame_x/2+2.5, 0, 0]) rotate([0, 0, 270])
+			translate([-40, 0, 0]) rotate([90, 0, 0]) button_24mm_hole();
+		translate([(frame_x/2)-neutrik_panel_thickness-4, -40, 0]) rotate([0, 0, 90]) frame_cutout();
+		translate([-frame_x/2+2.5, 0, 0]) rotate([0, 0, 270])
+			translate([40, 0, 0]) rotate([90, 0, 0]) button_24mm_hole();
+		translate([(frame_x/2)-neutrik_panel_thickness-4, 40, 0]) rotate([0, 0, 90]) frame_cutout();
+		translate([frame_x/2-2.5, 0, 0]) rotate([0, 0, 90])
+			translate([0, 0, 0]) rotate([90, 0, 0]) button_24mm_hole();
+		translate([-(frame_x/2)+neutrik_panel_thickness+4, 0, 0]) rotate([0, 0, 90]) frame_cutout();
+		translate([frame_x/2-2.5, 0, 0]) rotate([0, 0, 90])
+			translate([-40, 0, 0]) rotate([90, 0, 0]) button_24mm_hole();
+		translate([-(frame_x/2)+neutrik_panel_thickness+4, -40, 0]) rotate([0, 0, 90]) frame_cutout();
+		translate([frame_x/2-2.5, 0, 0]) rotate([0, 0, 90])
+			translate([40, 0, 0]) rotate([90, 0, 0]) button_24mm_hole();
+		translate([-(frame_x/2)+neutrik_panel_thickness+4, 40, 0]) rotate([0, 0, 90]) frame_cutout();
+	}
+}
+
+solo_frame();

src/misc-decorative-plate-24mm-button.scad

@@ -0,0 +1,32 @@
+/* Copyright Brian Stephan 2023
+ *
+ * This file is part of the Buildable Stick System.
+ *
+ * The Buildable Stick System is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 3 of the License, or (at your
+ * option) any later version.
+ *
+ * The Buildable Stick System is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+ */
+
+include <components.scad>
+
+module button_24mm_decorative_plate() {
+	difference() {
+		// get a 2mm slice of the bigger button cylinders
+		translate([0, 0, -55]) button_24mm_hole();
+		translate([0, 0, -100]) cube([500, 500, 198], center=true);
+		translate([0, 0, 100]) cube([500, 500, 198], center=true);
+		// cut out the normal holes
+		translate([0, 0, -1]) button_24mm_hole();
+	}
+}
+
+button_24mm_decorative_plate();

src/misc-decorative-plate-dir_arc-plus-w-24mm-8-button.scad

@@ -0,0 +1,32 @@
+/* Copyright Brian Stephan 2023
+ *
+ * This file is part of the Buildable Stick System.
+ *
+ * The Buildable Stick System is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 3 of the License, or (at your
+ * option) any later version.
+ *
+ * The Buildable Stick System is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+ */
+
+include <components.scad>
+
+module dir_arc_plus_w_24mm_8_button_decorative_plate() {
+	difference() {
+		// get a 2mm slice of the bigger button cylinders
+		translate([0, 0, -55]) dir_arc_plus_w_24mm_8_button();
+		translate([0, 0, -100]) cube([500, 500, 198], center=true);
+		translate([0, 0, 100]) cube([500, 500, 198], center=true);
+		// cut out the normal holes
+		translate([0, 0, -1]) dir_arc_plus_w_24mm_8_button();
+	}
+}
+
+dir_arc_plus_w_24mm_8_button_decorative_plate();

src/misc-decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one.scad

@@ -0,0 +1,36 @@
+/* Copyright Brian Stephan 2023
+ *
+ * This file is part of the Buildable Stick System.
+ *
+ * The Buildable Stick System is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 3 of the License, or (at your
+ * option) any later version.
+ *
+ * The Buildable Stick System is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+ */
+
+include <components.scad>
+
+module dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate() {
+	difference() {
+		// get a 2mm slice of the bigger button cylinders
+		union() {
+			translate([-top_plate_x/2, 0, -65]) dir_arc_w_30mm();
+			translate([top_plate_x/2, 0, -65]) sega_2p_plus_one();
+		}
+		translate([0, 0, -100]) cube([500, 500, 198], center=true);
+		translate([0, 0, 100]) cube([500, 500, 198], center=true);
+		// cut out the normal holes
+		translate([-top_plate_x/2, 0, -1]) dir_arc_w_30mm();
+		translate([top_plate_x/2, 0, -1]) sega_2p_plus_one();
+	}
+}
+
+dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate();

src/misc-decorative-plate-dir_arc-plus-w-30mm.scad

@@ -0,0 +1,32 @@
+/* Copyright Brian Stephan 2023
+ *
+ * This file is part of the Buildable Stick System.
+ *
+ * The Buildable Stick System is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 3 of the License, or (at your
+ * option) any later version.
+ *
+ * The Buildable Stick System is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+ */
+
+include <components.scad>
+
+module dir_arc_plus_w_30mm_decorative_plate() {
+	difference() {
+		// get a 2mm slice of the bigger button cylinders
+		translate([0, 0, -55]) dir_arc_w_30mm();
+		translate([0, 0, -100]) cube([500, 500, 198], center=true);
+		translate([0, 0, 100]) cube([500, 500, 198], center=true);
+		// cut out the normal holes
+		translate([0, 0, -1]) dir_arc_w_30mm();
+	}
+}
+
+dir_arc_plus_w_30mm_decorative_plate();

src/misc-decorative-plate-sega-2p-6-button.scad

@@ -0,0 +1,32 @@
+/* Copyright Brian Stephan 2023
+ *
+ * This file is part of the Buildable Stick System.
+ *
+ * The Buildable Stick System is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 3 of the License, or (at your
+ * option) any later version.
+ *
+ * The Buildable Stick System is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+ */
+
+include <components.scad>
+
+module sega_2p_6_button_decorative_plate() {
+	difference() {
+		// get a 2mm slice of the bigger button cylinders
+		translate([0, 0, -55]) sega_2p_6_button();
+		translate([0, 0, -100]) cube([500, 500, 198], center=true);
+		translate([0, 0, 100]) cube([500, 500, 198], center=true);
+		// cut out the normal holes
+		translate([0, 0, -1]) sega_2p_6_button();
+	}
+}
+
+sega_2p_6_button_decorative_plate();

src/misc-decorative-plate-sega-2p-plus-one.scad

@@ -0,0 +1,32 @@
+/* Copyright Brian Stephan 2023
+ *
+ * This file is part of the Buildable Stick System.
+ *
+ * The Buildable Stick System is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 3 of the License, or (at your
+ * option) any later version.
+ *
+ * The Buildable Stick System is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+ */
+
+include <components.scad>
+
+module sega_2p_plus_one_decorative_plate() {
+	difference() {
+		// get a 2mm slice of the bigger button cylinders
+		translate([0, 0, -55]) sega_2p_plus_one();
+		translate([0, 0, -100]) cube([500, 500, 198], center=true);
+		translate([0, 0, 100]) cube([500, 500, 198], center=true);
+		// cut out the normal holes
+		translate([0, 0, -1]) sega_2p_plus_one();
+	}
+}
+
+sega_2p_plus_one_decorative_plate();

src/misc-dustwasher-jlf.scad

@@ -0,0 +1,29 @@
+/* Copyright Brian Stephan 2023
+ *
+ * This file is part of the Buildable Stick System.
+ *
+ * The Buildable Stick System is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 3 of the License, or (at your
+ * option) any later version.
+ *
+ * The Buildable Stick System is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+ */
+
+include <components.scad>
+
+module jlf_dustwasher() {
+	difference() {
+		cylinder(r=jumbo_decorative_radius+5+hole_tolerance, h=2, $fn=50, center=true);
+		// 5.25 = 4.55 (diameter of shaft is 9.10mm) + .25 to let it take an angle
+		cylinder(r=4.8, h=2.1, $fn=50, center=true);
+	}
+}
+
+jlf_dustwasher();

src/misc-dustwasher-lsx-nobi.scad

@@ -0,0 +1,29 @@
+/* Copyright Brian Stephan 2023
+ *
+ * This file is part of the Buildable Stick System.
+ *
+ * The Buildable Stick System is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 3 of the License, or (at your
+ * option) any later version.
+ *
+ * The Buildable Stick System is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+ */
+
+include <components.scad>
+
+module lsx_nobi_dustwasher() {
+	difference() {
+		cylinder(r=jumbo_decorative_radius+5+hole_tolerance, h=2, $fn=50, center=true);
+		// 5.25 = 5 (diameter of shaft is 10mm) + .25 to let it take an angle
+		cylinder(r=5.25+hole_tolerance, h=2.1, $fn=50, center=true);
+	}
+}
+
+lsx_nobi_dustwasher();

src/misc-neutrik-d-plate-20mm-hole.scad

@@ -0,0 +1,30 @@
+/* Copyright Brian Stephan 2023
+ *
+ * This file is part of the Buildable Stick System.
+ *
+ * The Buildable Stick System is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 3 of the License, or (at your
+ * option) any later version.
+ *
+ * The Buildable Stick System is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+ */
+
+include <components.scad>
+use <misc-neutrik-d-plate.scad>
+
+module neutrik_d_plate_20mm() {
+	difference() {
+		neutrik_d_plate();
+		cylinder(r=10+hole_tolerance, h=5, $fn=50, center=true);
+		cube([2.2, 22, 5], center=true);
+	}
+}
+
+neutrik_d_plate_20mm();

src/misc-neutrik-d-plate-24mm-hole.scad

@@ -0,0 +1,29 @@
+/* Copyright Brian Stephan 2023
+ *
+ * This file is part of the Buildable Stick System.
+ *
+ * The Buildable Stick System is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 3 of the License, or (at your
+ * option) any later version.
+ *
+ * The Buildable Stick System is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+ */
+
+include <components.scad>
+use <misc-neutrik-d-plate.scad>
+
+module neutrik_d_plate_24mm() {
+	difference() {
+		neutrik_d_plate();
+		cylinder(r=12+hole_tolerance, h=5, $fn=50, center=true);
+	}
+}
+
+neutrik_d_plate_24mm();

src/misc-neutrik-d-plate.scad

@@ -18,14 +18,12 @@
 
 include <components.scad>
 
-module spdt_neutrik_d_plate() {
+module neutrik_d_plate() {
 	difference() {
 		cube([30, 35, 2], center=true);
 		translate([9.5, 12, 0]) neutrik_d_screw_hole();
 		translate([-9.5, -12, 0]) neutrik_d_screw_hole();
-		cylinder(r=10+hole_tolerance, h=5, $fn=50, center=true);
-		cube([2.2, 22, 5], center=true);
 	}
 }
 
-spdt_neutrik_d_plate();
+neutrik_d_plate();

src/top-panel-inset-dir_arc-plus-w-30mm-plus-one-with-mount.scad

@@ -17,11 +17,11 @@
  */
 
 include <components.scad>
-use <top-panel-dir_arc-plus-w-30mm-plus-one.scad>
+use <top-panel-inset-dir_arc-plus-w-30mm-plus-one.scad>
 
 module dir_arc_w_30mm_plus_one_panel_with_mount() {
 	dir_arc_w_30mm_plus_one_panel();
-	translate([65, 55, -(top_plate_z/2) - 3]) pcb_mount();
+	translate([-15, -40, -(top_plate_z/2) - 3]) rotate([0, 0, -15]) pcb_mount();
 }
 
 dir_arc_w_30mm_plus_one_panel_with_mount();

src/top-panel-inset-dir_arc-plus-w-30mm-plus-one.scad

@@ -20,7 +20,7 @@ include <components.scad>
 
 module dir_arc_w_30mm_plus_one_panel() {
 	difference() {
-		translate([top_plate_x/2, top_plate_y/2, 0]) topplate();
+		topplate();
 		dir_arc_w_30mm_plus_one();
 	}
 }

src/top-panel-inset-lever-and-dir_arc-plus-w-30mm.scad

@@ -0,0 +1,32 @@
+/* Copyright Brian Stephan 2023
+ *
+ * This file is part of the Buildable Stick System.
+ *
+ * The Buildable Stick System is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 3 of the License, or (at your
+ * option) any later version.
+ *
+ * The Buildable Stick System is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+ */
+
+include <components.scad>
+
+module top_panel_inset_lever_and_dir_arc_w_30mm() {
+	difference() {
+		union() {
+			topplate();
+			translate([(-top_plate_x/2)+55, (top_plate_y/2)-75, -((top_plate_z/2)+(lever_mount_z/2))]) levermountbase();
+		}
+		dir_arc_w_30mm();
+		translate([(-top_plate_x/2)+55, (top_plate_y/2)-75, 0]) levermountholes();
+	}
+}
+
+top_panel_inset_lever_and_dir_arc_w_30mm();

src/top-panel-inset-lever-with-mount.scad

@@ -17,7 +17,7 @@
  */
 
 include <components.scad>
-use <top-panel-lever.scad>
+use <top-panel-inset-lever.scad>
 
 module lever_panel_with_mount() {
 	lever_panel();

src/top-panel-inset-namco-noir-plus-one.scad

@@ -20,7 +20,7 @@ include <components.scad>
 
 module namco_noir_plus_one_panel() {
 	difference() {
-		translate([top_plate_x/2, top_plate_y/2, 0]) topplate();
+		topplate();
 		noir_plus_one();
 	}
 }

src/top-panel-inset-namco-noir-plus-two.scad

@@ -20,7 +20,7 @@ include <components.scad>
 
 module namco_noir_plus_two_panel() {
 	difference() {
-		translate([top_plate_x/2, top_plate_y/2, 0]) topplate();
+		topplate();
 		noir_plus_one();
 		translate([32.94-3.47-3.47, -78+7.37+4.49, 0]) noir_button_p1();
 	}

src/top-panel-inset-sega-2p-plus-one-plus-control-with-mount.scad

@@ -0,0 +1,27 @@
+/* Copyright Brian Stephan 2023
+ *
+ * This file is part of the Buildable Stick System.
+ *
+ * The Buildable Stick System is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 3 of the License, or (at your
+ * option) any later version.
+ *
+ * The Buildable Stick System is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+ */
+
+include <components.scad>
+use <top-panel-inset-sega-2p-plus-one-plus-control.scad>
+
+module top_panel_inset_sega_2p_plus_one_plus_control_with_mount() {
+	top_panel_inset_sega_2p_plus_one_plus_control();
+	translate([30, -50, -(top_plate_z/2) - 3]) pcb_mount();
+}
+
+top_panel_inset_sega_2p_plus_one_plus_control_with_mount();

src/top-panel-inset-sega-2p-plus-one-plus-control.scad

@@ -0,0 +1,30 @@
+/* Copyright Brian Stephan 2023
+ *
+ * This file is part of the Buildable Stick System.
+ *
+ * The Buildable Stick System is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 3 of the License, or (at your
+ * option) any later version.
+ *
+ * The Buildable Stick System is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+ */
+
+include <components.scad>
+
+module top_panel_inset_sega_2p_plus_one_plus_control() {
+	difference() {
+		topplate();
+		sega_2p_plus_one();
+		rotate([0, 0, 180]) side_chopper();
+		translate([89, 30, 0]) button_24mm_hole();
+	}
+}
+
+top_panel_inset_sega_2p_plus_one_plus_control();

src/top-panel-inset-sega-2p-plus-one.scad

@@ -20,7 +20,7 @@ include <components.scad>
 
 module sega_2p_plus_one_panel() {
 	difference() {
-		translate([top_plate_x/2, top_plate_y/2, 0]) topplate();
+		topplate();
 		sega_2p_plus_one();
 	}
 }

src/top-panel-left-lever-and-dir_arc-plus-w-30mm.scad

@@ -0,0 +1,33 @@
+/* Copyright Brian Stephan 2023
+ *
+ * This file is part of the Buildable Stick System.
+ *
+ * The Buildable Stick System is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 3 of the License, or (at your
+ * option) any later version.
+ *
+ * The Buildable Stick System is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+ */
+
+include <components.scad>
+
+module top_panel_left_lever_and_dir_arc_w_30mm() {
+	difference() {
+		union() {
+			top_plate_with_raised_overhang();
+			translate([(-top_plate_x/2)+55, (top_plate_y/2)-75, -((top_plate_z/2)+(lever_mount_z/2))]) levermountbase();
+		}
+		dir_arc_w_30mm();
+		side_chopper();
+		translate([(-top_plate_x/2)+55, (top_plate_y/2)-75, 0]) levermountholes();
+	}
+}
+
+top_panel_left_lever_and_dir_arc_w_30mm();

src/top-panel-left-lever.scad

@@ -19,22 +19,17 @@
 include <components.scad>
 
 // combine the lever mount and generic plate, with mounting holes
-module left_lever_panel() {
+module top_panel_left_lever() {
 	difference() {
 		// base plate
 		union() {
-			translate([20,-20,0])
-				topplate();
+			translate([0,-20,0]) top_plate_with_raised_overhang();
 			translate([0, 0, -((top_plate_z/2)+(lever_mount_z/2))]) levermountbase();
 		}
 		// holes to mount the lever
 		levermountholes();
+		side_chopper();
 	}
 }
 
-module left_lever_panel_with_mount() {
-	left_lever_panel();
-	translate([0, -top_plate_y/2+25, -(top_plate_z/2) - 3]) pcb_mount();
-}
-
-left_lever_panel_with_mount();
+top_panel_left_lever();

src/top-panel-middle-dir_arc-plus-w-30mm-with-mount.scad

@@ -0,0 +1,27 @@
+/* Copyright Brian Stephan 2023
+ *
+ * This file is part of the Buildable Stick System.
+ *
+ * The Buildable Stick System is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 3 of the License, or (at your
+ * option) any later version.
+ *
+ * The Buildable Stick System is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+ */
+
+include <components.scad>
+use <top-panel-middle-dir_arc-plus-w-30mm.scad>
+
+module top_panel_middle_dir_arc_w_30mm_with_mount() {
+	top_panel_middle_dir_arc_w_30mm();
+	translate([-15, -40, -(top_plate_z/2) - 3]) rotate([0, 0, -45]) pcb_mount();
+}
+
+top_panel_middle_dir_arc_w_30mm_with_mount();

src/top-panel-middle-dir_arc-plus-w-30mm.scad

@@ -0,0 +1,30 @@
+/* Copyright Brian Stephan 2023
+ *
+ * This file is part of the Buildable Stick System.
+ *
+ * The Buildable Stick System is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 3 of the License, or (at your
+ * option) any later version.
+ *
+ * The Buildable Stick System is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+ */
+
+include <components.scad>
+
+module top_panel_middle_dir_arc_w_30mm() {
+	difference() {
+		top_plate_with_raised_overhang();
+		dir_arc_w_30mm();
+		rotate([0, 0, 180]) side_chopper();
+		side_chopper();
+	}
+}
+
+top_panel_middle_dir_arc_w_30mm();

src/top-panel-right-sega-2p-plus-one-plus-control-with-mount-with-oled.scad

@@ -0,0 +1,30 @@
+/* Copyright Brian Stephan 2023
+ *
+ * This file is part of the Buildable Stick System.
+ *
+ * The Buildable Stick System is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 3 of the License, or (at your
+ * option) any later version.
+ *
+ * The Buildable Stick System is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+ */
+
+include <components.scad>
+use <top-panel-right-sega-2p-plus-one-plus-control-with-mount.scad>
+
+module top_panel_right_sega_2p_plus_one_plus_control_with_mount_with_oled() {
+	difference() {
+		top_panel_right_sega_2p_plus_one_plus_control_with_mount();
+		translate([75, 77.5, 0]) oled_ssd1306_mount_cutout();
+	}
+	translate([75, 77.5, 0.5]) oled_ssd1306_mount();
+}
+
+top_panel_right_sega_2p_plus_one_plus_control_with_mount_with_oled();

src/top-panel-right-sega-2p-plus-one-plus-control-with-mount.scad

@@ -0,0 +1,27 @@
+/* Copyright Brian Stephan 2023
+ *
+ * This file is part of the Buildable Stick System.
+ *
+ * The Buildable Stick System is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 3 of the License, or (at your
+ * option) any later version.
+ *
+ * The Buildable Stick System is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+ */
+
+include <components.scad>
+use <top-panel-right-sega-2p-plus-one-plus-control.scad>
+
+module top_panel_right_sega_2p_plus_one_plus_control_with_mount() {
+	top_panel_right_sega_2p_plus_one_plus_control();
+	translate([30, -50, -(top_plate_z/2) - 3]) pcb_mount();
+}
+
+top_panel_right_sega_2p_plus_one_plus_control_with_mount();

src/top-panel-right-sega-2p-plus-one-plus-control.scad

@@ -0,0 +1,30 @@
+/* Copyright Brian Stephan 2023
+ *
+ * This file is part of the Buildable Stick System.
+ *
+ * The Buildable Stick System is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 3 of the License, or (at your
+ * option) any later version.
+ *
+ * The Buildable Stick System is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+ */
+
+include <components.scad>
+
+module top_panel_right_sega_2p_plus_one_plus_control() {
+	difference() {
+		top_plate_with_raised_overhang();
+		sega_2p_plus_one();
+		rotate([0, 0, 180]) side_chopper();
+		translate([89, 30, 0]) button_24mm_hole();
+	}
+}
+
+top_panel_right_sega_2p_plus_one_plus_control();

src/top-panel-right-sega-2p-plus-one-with-mount.scad

@@ -0,0 +1,27 @@
+/* Copyright Brian Stephan 2023
+ *
+ * This file is part of the Buildable Stick System.
+ *
+ * The Buildable Stick System is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 3 of the License, or (at your
+ * option) any later version.
+ *
+ * The Buildable Stick System is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+ */
+
+include <components.scad>
+use <top-panel-right-sega-2p-plus-one.scad>
+
+module top_panel_right_sega_2p_plus_one_with_mount() {
+	top_panel_right_sega_2p_plus_one();
+	translate([30, -50, -(top_plate_z/2) - 3]) pcb_mount();
+}
+
+top_panel_right_sega_2p_plus_one_with_mount();

src/top-panel-right-sega-2p-plus-one.scad

@@ -0,0 +1,29 @@
+/* Copyright Brian Stephan 2023
+ *
+ * This file is part of the Buildable Stick System.
+ *
+ * The Buildable Stick System is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 3 of the License, or (at your
+ * option) any later version.
+ *
+ * The Buildable Stick System is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+ */
+
+include <components.scad>
+
+module top_panel_right_sega_2p_plus_one() {
+	difference() {
+		top_plate_with_raised_overhang();
+		sega_2p_plus_one();
+		rotate([0, 0, 180]) side_chopper();
+	}
+}
+
+top_panel_right_sega_2p_plus_one();

src/top-panel-solo-dir_arc-24mm-6-button.scad

@@ -0,0 +1,28 @@
+/* Copyright Brian Stephan 2023
+ *
+ * This file is part of the Buildable Stick System.
+ *
+ * The Buildable Stick System is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 3 of the License, or (at your
+ * option) any later version.
+ *
+ * The Buildable Stick System is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+ */
+
+include <components.scad>
+
+module dir_arc_24mm_6_button_panel() {
+	difference() {
+		top_plate_with_raised_overhang();
+		translate([-71.5, -top_plate_y/2+122.5, 0]) dir_arc_24mm_6_button();
+	}
+}
+
+dir_arc_24mm_6_button_panel();

src/top-panel-solo-dir_arc-plus-w-24mm-8-button.scad

@@ -0,0 +1,28 @@
+/* Copyright Brian Stephan 2023
+ *
+ * This file is part of the Buildable Stick System.
+ *
+ * The Buildable Stick System is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 3 of the License, or (at your
+ * option) any later version.
+ *
+ * The Buildable Stick System is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+ */
+
+include <components.scad>
+
+module dir_arc_plus_w_24mm_8_button_panel() {
+	difference() {
+		top_plate_with_raised_overhang();
+		translate([-80.5, top_plate_y/6, 0]) dir_arc_plus_w_24mm_8_button();
+	}
+}
+
+dir_arc_plus_w_24mm_8_button_panel();

src/top-panel-solo-lever-and-sega-2p-6-button.scad

@@ -0,0 +1,33 @@
+/* Copyright Brian Stephan 2023
+ *
+ * This file is part of the Buildable Stick System.
+ *
+ * The Buildable Stick System is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 3 of the License, or (at your
+ * option) any later version.
+ *
+ * The Buildable Stick System is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+ */
+
+include <components.scad>
+
+module top_panel_solo_lever_and_sega_2p_6_button() {
+	difference() {
+		// base plate
+		union() {
+			top_plate_with_raised_overhang();
+			translate([-60, 18, -((top_plate_z/2)+(lever_mount_z/2))]) levermountbase();
+		}
+		translate([95, -20, 0]) sega_2p_6_button();
+		translate([-60, 18, 0]) levermountholes();
+	}
+}
+
+top_panel_solo_lever_and_sega_2p_6_button();