decorative button surround plates for the top
This commit is contained in:
parent
ed3c5a1210
commit
e68ffbfc7b
|
@ -57,6 +57,10 @@ panel_support_width = 5;
|
|||
neutrik_d_screw_radius = 1.6 + hole_tolerance;
|
||||
neutrik_d_radius = 12 + hole_tolerance;
|
||||
|
||||
// additional button radius for decorative panels, etc.
|
||||
decorative_radius = 12;
|
||||
jumbo_decorative_radius = 15;
|
||||
|
||||
/* PARTS */
|
||||
|
||||
module m4_hole() {
|
||||
|
@ -88,6 +92,9 @@ module button_24mm_hole() {
|
|||
// slagcoin has screw-in nut diameter at 29.5mm, so radius+6 to leave some space
|
||||
// translation is to leave 3mm thickness in the plate without recentering anything
|
||||
translate([0, 0, -25]) cylinder(r=small_button_radius+6, h=49, $fn=50, center=true);
|
||||
// space for decorative button surround stuff
|
||||
translate([0, 0, 50]) cylinder(r=small_button_radius+decorative_radius, h=20, $fn=50, center=true);
|
||||
translate([0, 0, 70]) cylinder(r=small_button_radius+jumbo_decorative_radius, h=20, $fn=50, center=true);
|
||||
}
|
||||
|
||||
// button hole, with extra wide bits for various uses (cutting out space
|
||||
|
@ -98,6 +105,9 @@ module button_30mm_hole() {
|
|||
// slagcoin has screw-in nut diameter at 36mm, so radius+6 to leave some space
|
||||
// translation is to leave 3mm thickness in the plate without recentering anything
|
||||
translate([0, 0, -25]) cylinder(r=big_button_radius+6, h=49, $fn=50, center=true);
|
||||
// space for decorative button surround stuff
|
||||
translate([0, 0, 50]) cylinder(r=big_button_radius+decorative_radius, h=20, $fn=50, center=true);
|
||||
translate([0, 0, 70]) cylinder(r=big_button_radius+jumbo_decorative_radius, h=20, $fn=50, center=true);
|
||||
}
|
||||
|
||||
module frame_hex_bolt_hole() {
|
||||
|
|
|
@ -0,0 +1,38 @@
|
|||
/* Copyright Brian Stephan 2023
|
||||
*
|
||||
* This file is part of the Buildable Stick System.
|
||||
*
|
||||
* The Buildable Stick System is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation, either version 3 of the License, or (at your
|
||||
* option) any later version.
|
||||
*
|
||||
* The Buildable Stick System is distributed in the hope that it will be useful, but
|
||||
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
|
||||
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
||||
* more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License along with
|
||||
* the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
include <components.scad>
|
||||
|
||||
module dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate() {
|
||||
difference() {
|
||||
// get a 1mm slice of the bigger button cylinders
|
||||
union() {
|
||||
translate([-top_plate_x/2, 0, -65]) dir_arc_w_30mm();
|
||||
translate([top_plate_x/2, 0, -65]) sega_2p_plus_one();
|
||||
}
|
||||
translate([0, 0, -100]) cube([500, 500, 198], center=true);
|
||||
translate([0, 0, 100]) cube([500, 500, 198], center=true);
|
||||
// cut out the normal holes
|
||||
translate([-top_plate_x/2, 0, -1]) dir_arc_w_30mm();
|
||||
translate([top_plate_x/2, 0, -1]) sega_2p_plus_one();
|
||||
}
|
||||
/* // fill in some space */
|
||||
/* translate([-6, -6, 0]) cube([23, 23, 1], center=true); */
|
||||
}
|
||||
|
||||
dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate();
|
|
@ -0,0 +1,32 @@
|
|||
/* Copyright Brian Stephan 2023
|
||||
*
|
||||
* This file is part of the Buildable Stick System.
|
||||
*
|
||||
* The Buildable Stick System is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation, either version 3 of the License, or (at your
|
||||
* option) any later version.
|
||||
*
|
||||
* The Buildable Stick System is distributed in the hope that it will be useful, but
|
||||
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
|
||||
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
||||
* more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License along with
|
||||
* the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
include <components.scad>
|
||||
|
||||
module dir_arc_plus_w_30mm_decorative_plate() {
|
||||
difference() {
|
||||
// get a 1mm slice of the bigger button cylinders
|
||||
translate([0, 0, -45]) dir_arc_w_30mm();
|
||||
translate([0, 0, -50]) cube([500, 500, 98], center=true);
|
||||
translate([0, 0, 50]) cube([500, 500, 98], center=true);
|
||||
// cut out the normal holes
|
||||
translate([0, 0, -1]) dir_arc_w_30mm();
|
||||
}
|
||||
}
|
||||
|
||||
dir_arc_plus_w_30mm_decorative_plate();
|
|
@ -0,0 +1,33 @@
|
|||
/* Copyright Brian Stephan 2023
|
||||
*
|
||||
* This file is part of the Buildable Stick System.
|
||||
*
|
||||
* The Buildable Stick System is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation, either version 3 of the License, or (at your
|
||||
* option) any later version.
|
||||
*
|
||||
* The Buildable Stick System is distributed in the hope that it will be useful, but
|
||||
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
|
||||
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
||||
* more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License along with
|
||||
* the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
include <components.scad>
|
||||
|
||||
module sega_2p_plus_one_decorative_plate() {
|
||||
difference() {
|
||||
decorative_add=10;
|
||||
// get a 1mm slice of the bigger button cylinders
|
||||
translate([0, 0, -45]) sega_2p_plus_one();
|
||||
translate([0, 0, -50]) cube([500, 500, 98], center=true);
|
||||
translate([0, 0, 50]) cube([500, 500, 98], center=true);
|
||||
// cut out the normal holes
|
||||
translate([0, 0, -1]) sega_2p_plus_one();
|
||||
}
|
||||
}
|
||||
|
||||
sega_2p_plus_one_decorative_plate();
|
Loading…
Reference in New Issue