e2549694ea
start estimating cost of build
2023-09-12 09:24:33 -05:00
2aab029905
use the same frame cutout for neutrik D and 24mm holes
2023-09-11 20:34:09 -05:00
0f11aacec4
un-rotate the solo frame now that X is longer
2023-09-11 20:28:33 -05:00
3f0712af70
try making the frame wider than it is deep
...
the goal is to try to fit a hitstick-w into two frames
2023-09-11 13:29:40 -05:00
51ba220a5a
refer to proper parent filename
2023-09-11 12:01:27 -05:00
47d9a523c3
remove double translation of dir_arc-30mm layouts
2023-09-11 11:43:25 -05:00
3e74f3d915
refer to proper parent filename
2023-09-11 11:28:18 -05:00
cfb48574b2
change 30mm dir_arc layouts to be based on the thumb position
...
this will hopefully make some moving of stuff around a bit easier
2023-09-11 11:25:59 -05:00
36a96fbe26
tighten up the inner hole a bit, to no noticeable detriment
2023-09-11 10:37:46 -05:00
86ba641ba6
modularize the directional arc part of the 24mm all buttons layout
...
this was for a failed experiment, but it's probably good to do this
regardless
2023-09-11 10:37:43 -05:00
3d24dad1ae
spread out the frame connection holes a bit
2023-09-11 09:56:52 -05:00
fe961e8a7e
make neutrik D cutout bigger, simplifies that frame wall
2023-09-11 09:45:09 -05:00
28c0c0e475
properly and relatively position neutrik cutouts
2023-09-11 09:33:39 -05:00
2960151d98
remove more magic numbers, overhang relative to base frame stuff
2023-09-08 14:08:40 -05:00
82d1913551
remove more magic numbers, top plate is a derivative of base frame dimensions
2023-09-08 13:53:51 -05:00
88fc53988e
remove some magic numbers that are derived from base dimensions
2023-09-08 13:44:05 -05:00
f73c94be2f
move the rotated top plate into something reusable
2023-09-08 13:17:04 -05:00
cd21b4dd0a
remove unused import
2023-09-08 13:14:53 -05:00
7a71c8cd81
simple naming consistency change
...
sed -i 's/topplate_with_raised/top_plate_with_raised/' **/*.scad
2023-09-08 12:22:53 -05:00
350fc27285
break up the sega 2P layout into parts
...
messing with something that may never see the light of day, but no harm
in doing this
2023-09-08 12:15:46 -05:00
3b3b857568
build improvements, create zip file
2023-09-07 19:53:56 -05:00
fddb5d450e
commit my scratch file since it's a good demo
2023-09-07 19:17:48 -05:00
0329dd2b3c
make dustwasher hole a bit bigger to let the lever move
2023-09-07 19:12:20 -05:00
ee3dd23b36
another idea for next time
2023-09-07 11:02:00 -05:00
0e00f8d5d1
with the frame redesign, we can use 16mm M4s
2023-09-07 00:19:42 -05:00
b911a1b7c1
three section v2 render
2023-09-06 16:24:58 -05:00
ff19699d61
update TODO and README notes
...
no known issues!
2023-09-06 14:47:14 -05:00
8140d5e3a8
neutrik D base plate, also good as a cover
2023-09-06 14:44:54 -05:00
708122e510
dustwasher that fits the LSX-NOBI, maybe more
2023-09-06 11:30:52 -05:00
b704f158db
start v3 TODO
2023-09-05 11:47:50 -05:00
5177090625
rename some misc files for consistency/sorting
2023-09-05 10:41:59 -05:00
679d3025fe
decorative plate for a neutrik D mount
...
this is used for the outside of an ethercon, for instance
2023-09-03 09:56:53 -05:00
e68ffbfc7b
decorative button surround plates for the top
2023-09-03 09:53:49 -05:00
ed3c5a1210
rename non-overhang panels accordingly
2023-09-01 15:54:55 -05:00
fbf919b764
bottom panels with overhang for left/right/middle
2023-09-01 15:50:31 -05:00
9881f6391e
more top panel with overhang options
...
left/middle/right/solo is the overhang stuff, will need to rename the
inset ones at a later point
2023-09-01 13:39:48 -05:00
bfae2b093b
create a top left (overhang) lever panel
...
this replaces the left-adjusted inset panel, which I didn't use anyway,
and starts normalizing the overhang panels more
2023-09-01 13:38:29 -05:00
43a036e17c
consolidate button hole and wider cylinder into one object
...
nothing was materially using the non-snap-in cutout anymore (except for
the frame which wasn't updated since removing the bigger cutout
rectangle, so I fixed that), and I want to use it for a template thing
I'm working on, so remove some cruft
2023-08-30 10:02:12 -05:00
3b964ee6d8
scoot the buttons in panels a bit closer to each other
2023-08-30 00:24:19 -05:00
fe0e3b6017
center the button panels and their layouts
...
I can refactor the double translation away at soem later point
2023-08-30 00:22:31 -05:00
16d3feadc1
use the larger concaveness from the overhang panel
2023-08-29 23:33:54 -05:00
1db6577f75
remove unused, unnecessary panel with no concave
...
rename bottom panels now that concave is normal
2023-08-29 23:33:51 -05:00
cd5cd422e5
rename side chopper, going to be used for more than just frames
2023-08-29 10:13:40 -05:00
652653180e
go back to three neutrik D mounts on the solo frame
...
this (barely) works
2023-08-29 10:07:08 -05:00
73e93d4536
make a bottom overhang plate
...
slightly different than the top since there's no inset, so no need for
that frame or the posts
2023-08-29 10:06:21 -05:00
e51b79a193
squeeze dir. arc + W w/8 buttons on one panel
...
it's a tight squeeze; fits in the frame, but frame buttons/quick
connects maybe a problem
2023-08-28 10:51:07 -05:00
694e2c6173
bring 5 mm back to the frame
...
to accommodate quick connects, levers, etc.
2023-08-28 10:47:53 -05:00
a8ca6bafa9
fix the frame support box again
...
math is even harder when you're not using the right variables
2023-08-28 00:08:48 -05:00
cd71ed013b
fix the frame box width, which was too thin bc math is hard
2023-08-27 15:17:24 -05:00
12273649f5
better name for the 24mm dir + 6 button panel
2023-08-27 14:36:34 -05:00
