|
|
fa1f6927c5
|
new demo for v3 --- two panels
|
2023-09-17 11:28:56 -05:00 |
|
|
|
1da14d6dc3
|
remove stuff taken care of, bump engraving down again
|
2023-09-15 15:32:24 -05:00 |
|
|
|
0611e23975
|
keep some notes on filament while I'm at it
|
2023-09-15 15:30:10 -05:00 |
|
|
|
87db45df15
|
complete the cost estimation: total ~$26 for an enclosure
|
2023-09-15 15:20:17 -05:00 |
|
|
|
28809230bc
|
sega 2p panel with a button for start or whatever
|
2023-09-15 15:03:49 -05:00 |
|
|
|
2253889430
|
remove unnecessary difference/union duplication
|
2023-09-15 15:01:39 -05:00 |
|
|
|
a26f87a9d2
|
fit an arcade layout in one panel
|
2023-09-13 21:17:45 -05:00 |
|
|
|
962402c291
|
new top panels for my current two-frame experiment
seems good so far
|
2023-09-13 20:46:00 -05:00 |
|
|
|
63c7113d9f
|
more notes for next time
|
2023-09-12 23:52:32 -05:00 |
|
|
|
163dfc2c63
|
commit my new target assembly
|
2023-09-12 23:51:37 -05:00 |
|
|
|
aa633584e5
|
don't mirror, mostly duplicate the left frame components into right frame
doing a naive mirror meant the neutrik D mount holes were in the wrong
spot. fine for a 20mm + plate mount, but not good for any actual
component
|
2023-09-12 23:40:51 -05:00 |
|
|
|
767b38acef
|
more TODO notes
|
2023-09-12 23:40:48 -05:00 |
|
|
|
56367369b7
|
more panel estimates
|
2023-09-12 20:19:43 -05:00 |
|
|
|
fa304606df
|
generalize the top panel cost, they should all come in around this
|
2023-09-12 17:09:30 -05:00 |
|
|
|
5d5eb34f8a
|
top panel cost for something like the lever + dir_arc panel
|
2023-09-12 13:03:35 -05:00 |
|
|
|
17ab4815a6
|
more cost estimate documentation
|
2023-09-12 10:36:15 -05:00 |
|
|
|
afd548f8d9
|
correct hardware notes, since v2 the M4 standoffs are 45mm
|
2023-09-12 10:14:45 -05:00 |
|
|
|
e2549694ea
|
start estimating cost of build
|
2023-09-12 09:24:33 -05:00 |
|
|
|
2aab029905
|
use the same frame cutout for neutrik D and 24mm holes
|
2023-09-11 20:34:09 -05:00 |
|
|
|
0f11aacec4
|
un-rotate the solo frame now that X is longer
|
2023-09-11 20:28:33 -05:00 |
|
|
|
3f0712af70
|
try making the frame wider than it is deep
the goal is to try to fit a hitstick-w into two frames
|
2023-09-11 13:29:40 -05:00 |
|
|
|
51ba220a5a
|
refer to proper parent filename
|
2023-09-11 12:01:27 -05:00 |
|
|
|
47d9a523c3
|
remove double translation of dir_arc-30mm layouts
|
2023-09-11 11:43:25 -05:00 |
|
|
|
3e74f3d915
|
refer to proper parent filename
|
2023-09-11 11:28:18 -05:00 |
|
|
|
cfb48574b2
|
change 30mm dir_arc layouts to be based on the thumb position
this will hopefully make some moving of stuff around a bit easier
|
2023-09-11 11:25:59 -05:00 |
|
|
|
36a96fbe26
|
tighten up the inner hole a bit, to no noticeable detriment
|
2023-09-11 10:37:46 -05:00 |
|
|
|
86ba641ba6
|
modularize the directional arc part of the 24mm all buttons layout
this was for a failed experiment, but it's probably good to do this
regardless
|
2023-09-11 10:37:43 -05:00 |
|
|
|
3d24dad1ae
|
spread out the frame connection holes a bit
|
2023-09-11 09:56:52 -05:00 |
|
|
|
fe961e8a7e
|
make neutrik D cutout bigger, simplifies that frame wall
|
2023-09-11 09:45:09 -05:00 |
|
|
|
28c0c0e475
|
properly and relatively position neutrik cutouts
|
2023-09-11 09:33:39 -05:00 |
|
|
|
2960151d98
|
remove more magic numbers, overhang relative to base frame stuff
|
2023-09-08 14:08:40 -05:00 |
|
|
|
82d1913551
|
remove more magic numbers, top plate is a derivative of base frame dimensions
|
2023-09-08 13:53:51 -05:00 |
|
|
|
88fc53988e
|
remove some magic numbers that are derived from base dimensions
|
2023-09-08 13:44:05 -05:00 |
|
|
|
f73c94be2f
|
move the rotated top plate into something reusable
|
2023-09-08 13:17:04 -05:00 |
|
|
|
cd21b4dd0a
|
remove unused import
|
2023-09-08 13:14:53 -05:00 |
|
|
|
7a71c8cd81
|
simple naming consistency change
sed -i 's/topplate_with_raised/top_plate_with_raised/' **/*.scad
|
2023-09-08 12:22:53 -05:00 |
|
|
|
350fc27285
|
break up the sega 2P layout into parts
messing with something that may never see the light of day, but no harm
in doing this
|
2023-09-08 12:15:46 -05:00 |
|
|
|
3b3b857568
|
build improvements, create zip file
|
2023-09-07 19:53:56 -05:00 |
|
|
|
fddb5d450e
|
commit my scratch file since it's a good demo
|
2023-09-07 19:17:48 -05:00 |
|
|
|
0329dd2b3c
|
make dustwasher hole a bit bigger to let the lever move
v2.0.1
|
2023-09-07 19:12:20 -05:00 |
|
|
|
ee3dd23b36
|
another idea for next time
|
2023-09-07 11:02:00 -05:00 |
|
|
|
0e00f8d5d1
|
with the frame redesign, we can use 16mm M4s
|
2023-09-07 00:19:42 -05:00 |
|
|
|
b911a1b7c1
|
three section v2 render
v2.0.0
|
2023-09-06 16:24:58 -05:00 |
|
|
|
ff19699d61
|
update TODO and README notes
no known issues!
|
2023-09-06 14:47:14 -05:00 |
|
|
|
8140d5e3a8
|
neutrik D base plate, also good as a cover
|
2023-09-06 14:44:54 -05:00 |
|
|
|
708122e510
|
dustwasher that fits the LSX-NOBI, maybe more
|
2023-09-06 11:30:52 -05:00 |
|
|
|
b704f158db
|
start v3 TODO
|
2023-09-05 11:47:50 -05:00 |
|
|
|
5177090625
|
rename some misc files for consistency/sorting
|
2023-09-05 10:41:59 -05:00 |
|
|
|
679d3025fe
|
decorative plate for a neutrik D mount
this is used for the outside of an ethercon, for instance
|
2023-09-03 09:56:53 -05:00 |
|
|
|
e68ffbfc7b
|
decorative button surround plates for the top
|
2023-09-03 09:53:49 -05:00 |
|
