ed3c5a1210
rename non-overhang panels accordingly
2023-09-01 15:54:55 -05:00
fbf919b764
bottom panels with overhang for left/right/middle
2023-09-01 15:50:31 -05:00
9881f6391e
more top panel with overhang options
...
left/middle/right/solo is the overhang stuff, will need to rename the
inset ones at a later point
2023-09-01 13:39:48 -05:00
bfae2b093b
create a top left (overhang) lever panel
...
this replaces the left-adjusted inset panel, which I didn't use anyway,
and starts normalizing the overhang panels more
2023-09-01 13:38:29 -05:00
43a036e17c
consolidate button hole and wider cylinder into one object
...
nothing was materially using the non-snap-in cutout anymore (except for
the frame which wasn't updated since removing the bigger cutout
rectangle, so I fixed that), and I want to use it for a template thing
I'm working on, so remove some cruft
2023-08-30 10:02:12 -05:00
3b964ee6d8
scoot the buttons in panels a bit closer to each other
2023-08-30 00:24:19 -05:00
fe0e3b6017
center the button panels and their layouts
...
I can refactor the double translation away at soem later point
2023-08-30 00:22:31 -05:00
16d3feadc1
use the larger concaveness from the overhang panel
2023-08-29 23:33:54 -05:00
1db6577f75
remove unused, unnecessary panel with no concave
...
rename bottom panels now that concave is normal
2023-08-29 23:33:51 -05:00
cd5cd422e5
rename side chopper, going to be used for more than just frames
2023-08-29 10:13:40 -05:00
652653180e
go back to three neutrik D mounts on the solo frame
...
this (barely) works
2023-08-29 10:07:08 -05:00
73e93d4536
make a bottom overhang plate
...
slightly different than the top since there's no inset, so no need for
that frame or the posts
2023-08-29 10:06:21 -05:00
e51b79a193
squeeze dir. arc + W w/8 buttons on one panel
...
it's a tight squeeze; fits in the frame, but frame buttons/quick
connects maybe a problem
2023-08-28 10:51:07 -05:00
694e2c6173
bring 5 mm back to the frame
...
to accommodate quick connects, levers, etc.
2023-08-28 10:47:53 -05:00
a8ca6bafa9
fix the frame support box again
...
math is even harder when you're not using the right variables
2023-08-28 00:08:48 -05:00
cd71ed013b
fix the frame box width, which was too thin bc math is hard
2023-08-27 15:17:24 -05:00
12273649f5
better name for the 24mm dir + 6 button panel
2023-08-27 14:36:34 -05:00
57be13d9cb
more accurate name for the neutrik D plate
2023-08-26 22:12:07 -05:00
344de2c84f
standalone frame, with tweaks to the frame as a consequence
...
* frame width has been reduced in order to leave more space and have
sunken buttons somewhat accessible
* the cutout for neutrik mounts has been reduced and moved into the
holes themselves, to do this more modularly and restore some support
2023-08-26 21:57:12 -05:00
a8d02f9229
squish a decent all buttons layout onto one panel
...
this uses the new raised panel look, I'm trying it out but haven't
updated the other top panels yet until I'm sure I like it --- it'll mean
a lot of chopping
2023-08-26 14:48:01 -05:00
af38f0a580
move top plate holes into reusable module
2023-08-26 14:42:58 -05:00
19fa31b425
a one-panel 24mm dir arc + action buttons layout
...
(you can fit 6! not bad!)
2023-08-25 15:36:41 -05:00
6ca57615e4
solve for 24mm/30mm snap-ins
2023-08-25 15:36:38 -05:00
8fc51019c3
really simple Makefile to compile the STLs
2023-08-24 23:23:41 -05:00
f7fa46a074
include an example of what's possible
2023-08-24 23:11:43 -05:00
9f98f0cfa7
rename project before sharing
2023-08-24 22:49:34 -05:00
a3608492fb
considerably more README documentation
2023-08-24 19:51:07 -05:00
144e512433
licensing language tweaks
2023-08-24 15:04:11 -05:00
b0ca4d97c8
neutrik D plate to attach SPDT switches to
2023-08-24 12:54:42 -05:00
94a2e372f1
another improvement to make to v2
2023-08-24 10:16:35 -05:00
084f812541
directional buttons panel with PCB mount
...
also more notes for v2
2023-08-23 22:27:01 -05:00
21467010a7
split lever panel and w/mount variant into two files
2023-08-23 10:37:52 -05:00
cc7c5c5723
namco noir with even MOAR BUTTONS
2023-08-22 12:23:20 -05:00
4020eabb31
for next time: fix snap-ins
2023-08-22 12:22:29 -05:00
00e8344a91
panel for 30mm "directional arc" buttons + W + one extra
...
the extra could be mapped to L3 or soemthing like that, for SF6 or other
weirdos
2023-08-21 15:00:28 -05:00
0362e8f3ed
concave bottom panel to account for levers
...
(see notes in TODO)
2023-08-21 08:42:30 -05:00
facee903cf
add mount for a standard PS360+/RP2040ABB form factor PCB
2023-08-20 23:59:24 -05:00
f5ecdc9154
shrink the JLF mount panel height by 1mm
...
trying to shave a couple mm off the design to make room for this Seimitsu SEL-70X-F
2023-08-20 23:54:50 -05:00
80079a74a8
properly center frame mounting holes
...
noticed this after my first print, it's a fix for v1 but I don't think
I'll bother reprinting my stuff yet
2023-08-20 18:24:25 -05:00
40692bb6ff
bottom panel is just the base top panel
2023-08-20 09:56:47 -05:00
33271abef0
leaving some notes and comments for myself
2023-08-20 09:56:02 -05:00
f46500e941
start a TODO document for noticed future tweaks
2023-08-19 22:33:02 -05:00
6064884a89
account for 24mm buttons in the frame tops
2023-08-19 17:51:01 -05:00
7faa28b4b1
simplify the frame and use roundedcube for it
2023-08-19 08:59:41 -05:00
6c04c1b2f2
ethercon (and probably other neutrik Ds) need the wall thinner
...
to avoid overhang, this shrinks the overall case by 2mm on the x and y,
as this number was somewhat arbitrary
2023-08-18 13:18:38 -05:00
78ea95ecbd
moduleify middle_frame for testing purposes
2023-08-18 10:08:34 -05:00
42f417d86a
middle frame mostly ok, but I forgot to check neutrik panel thickness
2023-08-18 00:23:59 -05:00
e94a0498a3
remove the test hole from the lever plate
2023-08-17 20:45:38 -05:00
6e1ef9efaf
tiny rename for the lever base plate
...
this might move into components (while not adjusted) at some point
2023-08-17 20:27:59 -05:00
925cfebe9e
moduleize left lever panel for reuse
2023-08-17 20:02:59 -05:00
