Brian S. Stephan
350fc27285
break up the sega 2P layout into parts
...
messing with something that may never see the light of day, but no harm
in doing this
2023-09-08 12:15:46 -05:00
Brian S. Stephan
3b3b857568
build improvements, create zip file
2023-09-07 19:53:56 -05:00
Brian S. Stephan
fddb5d450e
commit my scratch file since it's a good demo
2023-09-07 19:17:48 -05:00
Brian S. Stephan
0329dd2b3c
make dustwasher hole a bit bigger to let the lever move
2023-09-07 19:12:20 -05:00
Brian S. Stephan
ee3dd23b36
another idea for next time
2023-09-07 11:02:00 -05:00
Brian S. Stephan
0e00f8d5d1
with the frame redesign, we can use 16mm M4s
2023-09-07 00:19:42 -05:00
Brian S. Stephan
b911a1b7c1
three section v2 render
2023-09-06 16:24:58 -05:00
Brian S. Stephan
ff19699d61
update TODO and README notes
...
no known issues!
2023-09-06 14:47:14 -05:00
Brian S. Stephan
8140d5e3a8
neutrik D base plate, also good as a cover
2023-09-06 14:44:54 -05:00
Brian S. Stephan
708122e510
dustwasher that fits the LSX-NOBI, maybe more
2023-09-06 11:30:52 -05:00
Brian S. Stephan
b704f158db
start v3 TODO
2023-09-05 11:47:50 -05:00
Brian S. Stephan
5177090625
rename some misc files for consistency/sorting
2023-09-05 10:41:59 -05:00
Brian S. Stephan
679d3025fe
decorative plate for a neutrik D mount
...
this is used for the outside of an ethercon, for instance
2023-09-03 09:56:53 -05:00
Brian S. Stephan
e68ffbfc7b
decorative button surround plates for the top
2023-09-03 09:53:49 -05:00
Brian S. Stephan
ed3c5a1210
rename non-overhang panels accordingly
2023-09-01 15:54:55 -05:00
Brian S. Stephan
fbf919b764
bottom panels with overhang for left/right/middle
2023-09-01 15:50:31 -05:00
Brian S. Stephan
9881f6391e
more top panel with overhang options
...
left/middle/right/solo is the overhang stuff, will need to rename the
inset ones at a later point
2023-09-01 13:39:48 -05:00
Brian S. Stephan
bfae2b093b
create a top left (overhang) lever panel
...
this replaces the left-adjusted inset panel, which I didn't use anyway,
and starts normalizing the overhang panels more
2023-09-01 13:38:29 -05:00
Brian S. Stephan
43a036e17c
consolidate button hole and wider cylinder into one object
...
nothing was materially using the non-snap-in cutout anymore (except for
the frame which wasn't updated since removing the bigger cutout
rectangle, so I fixed that), and I want to use it for a template thing
I'm working on, so remove some cruft
2023-08-30 10:02:12 -05:00
Brian S. Stephan
3b964ee6d8
scoot the buttons in panels a bit closer to each other
2023-08-30 00:24:19 -05:00
Brian S. Stephan
fe0e3b6017
center the button panels and their layouts
...
I can refactor the double translation away at soem later point
2023-08-30 00:22:31 -05:00
Brian S. Stephan
16d3feadc1
use the larger concaveness from the overhang panel
2023-08-29 23:33:54 -05:00
Brian S. Stephan
1db6577f75
remove unused, unnecessary panel with no concave
...
rename bottom panels now that concave is normal
2023-08-29 23:33:51 -05:00
Brian S. Stephan
cd5cd422e5
rename side chopper, going to be used for more than just frames
2023-08-29 10:13:40 -05:00
Brian S. Stephan
652653180e
go back to three neutrik D mounts on the solo frame
...
this (barely) works
2023-08-29 10:07:08 -05:00
Brian S. Stephan
73e93d4536
make a bottom overhang plate
...
slightly different than the top since there's no inset, so no need for
that frame or the posts
2023-08-29 10:06:21 -05:00
Brian S. Stephan
e51b79a193
squeeze dir. arc + W w/8 buttons on one panel
...
it's a tight squeeze; fits in the frame, but frame buttons/quick
connects maybe a problem
2023-08-28 10:51:07 -05:00
Brian S. Stephan
694e2c6173
bring 5 mm back to the frame
...
to accommodate quick connects, levers, etc.
2023-08-28 10:47:53 -05:00
Brian S. Stephan
a8ca6bafa9
fix the frame support box again
...
math is even harder when you're not using the right variables
2023-08-28 00:08:48 -05:00
Brian S. Stephan
cd71ed013b
fix the frame box width, which was too thin bc math is hard
2023-08-27 15:17:24 -05:00
Brian S. Stephan
12273649f5
better name for the 24mm dir + 6 button panel
2023-08-27 14:36:34 -05:00
Brian S. Stephan
57be13d9cb
more accurate name for the neutrik D plate
2023-08-26 22:12:07 -05:00
Brian S. Stephan
344de2c84f
standalone frame, with tweaks to the frame as a consequence
...
* frame width has been reduced in order to leave more space and have
sunken buttons somewhat accessible
* the cutout for neutrik mounts has been reduced and moved into the
holes themselves, to do this more modularly and restore some support
2023-08-26 21:57:12 -05:00
Brian S. Stephan
a8d02f9229
squish a decent all buttons layout onto one panel
...
this uses the new raised panel look, I'm trying it out but haven't
updated the other top panels yet until I'm sure I like it --- it'll mean
a lot of chopping
2023-08-26 14:48:01 -05:00
Brian S. Stephan
af38f0a580
move top plate holes into reusable module
2023-08-26 14:42:58 -05:00
Brian S. Stephan
19fa31b425
a one-panel 24mm dir arc + action buttons layout
...
(you can fit 6! not bad!)
2023-08-25 15:36:41 -05:00
Brian S. Stephan
6ca57615e4
solve for 24mm/30mm snap-ins
2023-08-25 15:36:38 -05:00
Brian S. Stephan
8fc51019c3
really simple Makefile to compile the STLs
2023-08-24 23:23:41 -05:00
Brian S. Stephan
f7fa46a074
include an example of what's possible
2023-08-24 23:11:43 -05:00
Brian S. Stephan
9f98f0cfa7
rename project before sharing
2023-08-24 22:49:34 -05:00
Brian S. Stephan
a3608492fb
considerably more README documentation
2023-08-24 19:51:07 -05:00
Brian S. Stephan
144e512433
licensing language tweaks
2023-08-24 15:04:11 -05:00
Brian S. Stephan
b0ca4d97c8
neutrik D plate to attach SPDT switches to
2023-08-24 12:54:42 -05:00
Brian S. Stephan
94a2e372f1
another improvement to make to v2
2023-08-24 10:16:35 -05:00
Brian S. Stephan
084f812541
directional buttons panel with PCB mount
...
also more notes for v2
2023-08-23 22:27:01 -05:00
Brian S. Stephan
21467010a7
split lever panel and w/mount variant into two files
2023-08-23 10:37:52 -05:00
Brian S. Stephan
cc7c5c5723
namco noir with even MOAR BUTTONS
2023-08-22 12:23:20 -05:00
Brian S. Stephan
4020eabb31
for next time: fix snap-ins
2023-08-22 12:22:29 -05:00
Brian S. Stephan
00e8344a91
panel for 30mm "directional arc" buttons + W + one extra
...
the extra could be mapped to L3 or soemthing like that, for SF6 or other
weirdos
2023-08-21 15:00:28 -05:00
Brian S. Stephan
0362e8f3ed
concave bottom panel to account for levers
...
(see notes in TODO)
2023-08-21 08:42:30 -05:00