cb82933e50
docs updates for v4.4.1
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-07-07 10:37:05 -05:00
bc68f8b0dc
naming consistency: panels are top/bottom
...
vertical planes that make up the frame are either sides or front/back
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-06-21 11:38:31 -05:00
92d3f9e6d5
some minor documentation updates
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-06-21 08:44:40 -05:00
c7befe0800
update the TODO
...
I did the "four pieces" one, yay!
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-03-06 11:41:50 -06:00
41bfe3a661
bevel overhang panels in the same way as the frame
...
this also ends our last usage of roundedcube.scad
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-03-06 11:41:17 -06:00
b653815ef5
leave a TODO note for myself
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2023-12-28 13:55:32 -06:00
6a4980165d
write down a thing to try if I ever get time
2023-11-10 15:49:45 -06:00
1da14d6dc3
remove stuff taken care of, bump engraving down again
2023-09-15 15:32:24 -05:00
63c7113d9f
more notes for next time
2023-09-12 23:52:32 -05:00
767b38acef
more TODO notes
2023-09-12 23:40:48 -05:00
ee3dd23b36
another idea for next time
2023-09-07 11:02:00 -05:00
ff19699d61
update TODO and README notes
...
no known issues!
2023-09-06 14:47:14 -05:00
b704f158db
start v3 TODO
2023-09-05 11:47:50 -05:00
344de2c84f
standalone frame, with tweaks to the frame as a consequence
...
* frame width has been reduced in order to leave more space and have
sunken buttons somewhat accessible
* the cutout for neutrik mounts has been reduced and moved into the
holes themselves, to do this more modularly and restore some support
2023-08-26 21:57:12 -05:00
6ca57615e4
solve for 24mm/30mm snap-ins
2023-08-25 15:36:38 -05:00
94a2e372f1
another improvement to make to v2
2023-08-24 10:16:35 -05:00
084f812541
directional buttons panel with PCB mount
...
also more notes for v2
2023-08-23 22:27:01 -05:00
4020eabb31
for next time: fix snap-ins
2023-08-22 12:22:29 -05:00
0362e8f3ed
concave bottom panel to account for levers
...
(see notes in TODO)
2023-08-21 08:42:30 -05:00
f5ecdc9154
shrink the JLF mount panel height by 1mm
...
trying to shave a couple mm off the design to make room for this Seimitsu SEL-70X-F
2023-08-20 23:54:50 -05:00
33271abef0
leaving some notes and comments for myself
2023-08-20 09:56:02 -05:00
f46500e941
start a TODO document for noticed future tweaks
2023-08-19 22:33:02 -05:00
