document a trick for getting panels out in this frictioned world

Signed-off-by: Brian S. Stephan <bss@incorporeal.org>

CONTRIBUTING.md

@@ -0,0 +1,35 @@
+# Contributing Guidelines
+
+The Buildable Stick System is made available under the GPLv3 (or later) license. Contributions are welcome via pull
+requests. This document outlines the process to get your contribution accepted.
+
+## Sign Offs/Custody of Contributions
+
+I do not request the copyright of contributions be assigned to me or to the project, and I require no provision that I
+be allowed to relicense your contributions. My personal oath is to maintain inbound=outbound in my open source projects,
+and the expectation is authors are responsible for their contributions.
+
+I am following the the [Developer Certificate of Origin (DCO)](https://developercertificate.org/), also available at
+`DCO.txt`. The DCO is a way for contributors to certify that they wrote or otherwise have the right to license their
+code contributions to the project. Contributors must sign-off that they adhere to these requirements by adding a
+`Signed-off-by` line to their commit message, and/or, for frequent contributors, by signing off on their entry in
+`MAINTAINERS.md`.
+
+This process is followed by a number of open source projects, most notably the Linux kernel. Here's the gist of it:
+
+```
+[Your normal Git commit message here.]
+
+Signed-off-by: Random J Developer <random@developer.example.org>
+```
+
+`git help commit` has more info on adding this:
+
+```
+-s, --signoff
+    Add Signed-off-by line by the committer at the end of the commit log
+    message. The meaning of a signoff depends on the project, but it typically
+    certifies that committer has the rights to submit this work under the same
+    license and agrees to a Developer Certificate of Origin (see
+    http://developercertificate.org/ for more information).
+```

DCO.txt

@@ -0,0 +1,34 @@
+Developer Certificate of Origin
+Version 1.1
+
+Copyright (C) 2004, 2006 The Linux Foundation and its contributors.
+
+Everyone is permitted to copy and distribute verbatim copies of this
+license document, but changing it is not allowed.
+
+
+Developer's Certificate of Origin 1.1
+
+By making a contribution to this project, I certify that:
+
+(a) The contribution was created in whole or in part by me and I
+    have the right to submit it under the open source license
+    indicated in the file; or
+
+(b) The contribution is based upon previous work that, to the best
+    of my knowledge, is covered under an appropriate open source
+    license and I have the right under that license to submit that
+    work with modifications, whether created in whole or in part
+    by me, under the same open source license (unless I am
+    permitted to submit under a different license), as indicated
+    in the file; or
+
+(c) The contribution was provided directly to me by some other
+    person who certified (a), (b) or (c) and I have not modified
+    it.
+
+(d) I understand and agree that this project and the contribution
+    are public and that a record of the contribution (including all
+    personal information I submit with it, including my sign-off) is
+    maintained indefinitely and may be redistributed consistent with
+    this project or the open source license(s) involved.

LICENSE

@@ -1,232 +1,674 @@
-GNU GENERAL PUBLIC LICENSE
-Version 3, 29 June 2007
-
-Copyright © 2007 Free Software Foundation, Inc. <http://fsf.org/>
-
-Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
-
-Preamble
-
-The GNU General Public License is a free, copyleft license for software and other kinds of works.
-
-The licenses for most software and other practical works are designed to take away your freedom to share and change the works. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change all versions of a program--to make sure it remains free software for all its users. We, the Free Software Foundation, use the GNU General Public License for most of our software; it applies also to any other work released this way by its authors. You can apply it to your programs, too.
-
-When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for them if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs, and that you know you can do these things.
-
-To protect your rights, we need to prevent others from denying you these rights or asking you to surrender the rights. Therefore, you have certain responsibilities if you distribute copies of the software, or if you modify it: responsibilities to respect the freedom of others.
-
-For example, if you distribute copies of such a program, whether gratis or for a fee, you must pass on to the recipients the same freedoms that you received. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights.
-
-Developers that use the GNU GPL protect your rights with two steps: (1) assert copyright on the software, and (2) offer you this License giving you legal permission to copy, distribute and/or modify it.
-
-For the developers' and authors' protection, the GPL clearly explains that there is no warranty for this free software. For both users' and authors' sake, the GPL requires that modified versions be marked as changed, so that their problems will not be attributed erroneously to authors of previous versions.
-
-Some devices are designed to deny users access to install or run modified versions of the software inside them, although the manufacturer can do so. This is fundamentally incompatible with the aim of protecting users' freedom to change the software. The systematic pattern of such abuse occurs in the area of products for individuals to use, which is precisely where it is most unacceptable. Therefore, we have designed this version of the GPL to prohibit the practice for those products. If such problems arise substantially in other domains, we stand ready to extend this provision to those domains in future versions of the GPL, as needed to protect the freedom of users.
-
-Finally, every program is threatened constantly by software patents. States should not allow patents to restrict development and use of software on general-purpose computers, but in those that do, we wish to avoid the special danger that patents applied to a free program could make it effectively proprietary. To prevent this, the GPL assures that patents cannot be used to render the program non-free.
-
-The precise terms and conditions for copying, distribution and modification follow.
-
-TERMS AND CONDITIONS
-
-0. Definitions.
-
-“This License” refers to version 3 of the GNU General Public License.
-
-“Copyright” also means copyright-like laws that apply to other kinds of works, such as semiconductor masks.
-
-“The Program” refers to any copyrightable work licensed under this License. Each licensee is addressed as “you”. “Licensees” and “recipients” may be individuals or organizations.
-
-To “modify” a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission, other than the making of an exact copy. The resulting work is called a “modified version” of the earlier work or a work “based on” the earlier work.
-
-A “covered work” means either the unmodified Program or a work based on the Program.
-
-To “propagate” a work means to do anything with it that, without permission, would make you directly or secondarily liable for infringement under applicable copyright law, except executing it on a computer or modifying a private copy. Propagation includes copying, distribution (with or without modification), making available to the public, and in some countries other activities as well.
-
-To “convey” a work means any kind of propagation that enables other parties to make or receive copies. Mere interaction with a user through a computer network, with no transfer of a copy, is not conveying.
-
-An interactive user interface displays “Appropriate Legal Notices” to the extent that it includes a convenient and prominently visible feature that (1) displays an appropriate copyright notice, and (2) tells the user that there is no warranty for the work (except to the extent that warranties are provided), that licensees may convey the work under this License, and how to view a copy of this License. If the interface presents a list of user commands or options, such as a menu, a prominent item in the list meets this criterion.
-
-1. Source Code.
-The “source code” for a work means the preferred form of the work for making modifications to it. “Object code” means any non-source form of a work.
-
-A “Standard Interface” means an interface that either is an official standard defined by a recognized standards body, or, in the case of interfaces specified for a particular programming language, one that is widely used among developers working in that language.
-
-The “System Libraries” of an executable work include anything, other than the work as a whole, that (a) is included in the normal form of packaging a Major Component, but which is not part of that Major Component, and (b) serves only to enable use of the work with that Major Component, or to implement a Standard Interface for which an implementation is available to the public in source code form. A “Major Component”, in this context, means a major essential component (kernel, window system, and so on) of the specific operating system (if any) on which the executable work runs, or a compiler used to produce the work, or an object code interpreter used to run it.
-
-The “Corresponding Source” for a work in object code form means all the source code needed to generate, install, and (for an executable work) run the object code and to modify the work, including scripts to control those activities. However, it does not include the work's System Libraries, or general-purpose tools or generally available free programs which are used unmodified in performing those activities but which are not part of the work. For example, Corresponding Source includes interface definition files associated with source files for the work, and the source code for shared libraries and dynamically linked subprograms that the work is specifically designed to require, such as by intimate data communication or control flow between those subprograms and other parts of the work.
-
-The Corresponding Source need not include anything that users can regenerate automatically from other parts of the Corresponding Source.
-
-The Corresponding Source for a work in source code form is that same work.
-
-2. Basic Permissions.
-All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided the stated conditions are met. This License explicitly affirms your unlimited permission to run the unmodified Program. The output from running a covered work is covered by this License only if the output, given its content, constitutes a covered work. This License acknowledges your rights of fair use or other equivalent, as provided by copyright law.
-
-You may make, run and propagate covered works that you do not convey, without conditions so long as your license otherwise remains in force. You may convey covered works to others for the sole purpose of having them make modifications exclusively for you, or provide you with facilities for running those works, provided that you comply with the terms of this License in conveying all material for which you do not control copyright. Those thus making or running the covered works for you must do so exclusively on your behalf, under your direction and control, on terms that prohibit them from making any copies of your copyrighted material outside their relationship with you.
-
-Conveying under any other circumstances is permitted solely under the conditions stated below. Sublicensing is not allowed; section 10 makes it unnecessary.
-
-3. Protecting Users' Legal Rights From Anti-Circumvention Law.
-No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or restricting circumvention of such measures.
-
-When you convey a covered work, you waive any legal power to forbid circumvention of technological measures to the extent such circumvention is effected by exercising rights under this License with respect to the covered work, and you disclaim any intention to limit operation or modification of the work as a means of enforcing, against the work's users, your or third parties' legal rights to forbid circumvention of technological measures.
-
-4. Conveying Verbatim Copies.
-You may convey verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice; keep intact all notices stating that this License and any non-permissive terms added in accord with section 7 apply to the code; keep intact all notices of the absence of any warranty; and give all recipients a copy of this License along with the Program.
-
-You may charge any price or no price for each copy that you convey, and you may offer support or warranty protection for a fee.
-
-5. Conveying Modified Source Versions.
-You may convey a work based on the Program, or the modifications to produce it from the Program, in the form of source code under the terms of section 4, provided that you also meet all of these conditions:
-
-     a) The work must carry prominent notices stating that you modified it, and giving a relevant date.
-
-     b) The work must carry prominent notices stating that it is released under this License and any conditions added under section 7. This requirement modifies the requirement in section 4 to “keep intact all notices”.
-
-     c) You must license the entire work, as a whole, under this License to anyone who comes into possession of a copy. This License will therefore apply, along with any applicable section 7 additional terms, to the whole of the work, and all its parts, regardless of how they are packaged. This License gives no permission to license the work in any other way, but it does not invalidate such permission if you have separately received it.
-
-     d) If the work has interactive user interfaces, each must display Appropriate Legal Notices; however, if the Program has interactive interfaces that do not display Appropriate Legal Notices, your work need not make them do so.
-
-A compilation of a covered work with other separate and independent works, which are not by their nature extensions of the covered work, and which are not combined with it such as to form a larger program, in or on a volume of a storage or distribution medium, is called an “aggregate” if the compilation and its resulting copyright are not used to limit the access or legal rights of the compilation's users beyond what the individual works permit. Inclusion of a covered work in an aggregate does not cause this License to apply to the other parts of the aggregate.
-
-6. Conveying Non-Source Forms.
-You may convey a covered work in object code form under the terms of sections 4 and 5, provided that you also convey the machine-readable Corresponding Source under the terms of this License, in one of these ways:
-
-     a) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by the Corresponding Source fixed on a durable physical medium customarily used for software interchange.
-
-     b) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by a written offer, valid for at least three years and valid for as long as you offer spare parts or customer support for that product model, to give anyone who possesses the object code either (1) a copy of the Corresponding Source for all the software in the product that is covered by this License, on a durable physical medium customarily used for software interchange, for a price no more than your reasonable cost of physically performing this conveying of source, or (2) access to copy the Corresponding Source from a network server at no charge.
-
-     c) Convey individual copies of the object code with a copy of the written offer to provide the Corresponding Source. This alternative is allowed only occasionally and noncommercially, and only if you received the object code with such an offer, in accord with subsection 6b.
-
-     d) Convey the object code by offering access from a designated place (gratis or for a charge), and offer equivalent access to the Corresponding Source in the same way through the same place at no further charge. You need not require recipients to copy the Corresponding Source along with the object code. If the place to copy the object code is a network server, the Corresponding Source may be on a different server (operated by you or a third party) that supports equivalent copying facilities, provided you maintain clear directions next to the object code saying where to find the Corresponding Source. Regardless of what server hosts the Corresponding Source, you remain obligated to ensure that it is available for as long as needed to satisfy these requirements.
-
-     e) Convey the object code using peer-to-peer transmission, provided you inform other peers where the object code and Corresponding Source of the work are being offered to the general public at no charge under subsection 6d.
-
-A separable portion of the object code, whose source code is excluded from the Corresponding Source as a System Library, need not be included in conveying the object code work.
-
-A “User Product” is either (1) a “consumer product”, which means any tangible personal property which is normally used for personal, family, or household purposes, or (2) anything designed or sold for incorporation into a dwelling. In determining whether a product is a consumer product, doubtful cases shall be resolved in favor of coverage. For a particular product received by a particular user, “normally used” refers to a typical or common use of that class of product, regardless of the status of the particular user or of the way in which the particular user actually uses, or expects or is expected to use, the product. A product is a consumer product regardless of whether the product has substantial commercial, industrial or non-consumer uses, unless such uses represent the only significant mode of use of the product.
-
-“Installation Information” for a User Product means any methods, procedures, authorization keys, or other information required to install and execute modified versions of a covered work in that User Product from a modified version of its Corresponding Source. The information must suffice to ensure that the continued functioning of the modified object code is in no case prevented or interfered with solely because modification has been made.
-
-If you convey an object code work under this section in, or with, or specifically for use in, a User Product, and the conveying occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the recipient in perpetuity or for a fixed term (regardless of how the transaction is characterized), the Corresponding Source conveyed under this section must be accompanied by the Installation Information. But this requirement does not apply if neither you nor any third party retains the ability to install modified object code on the User Product (for example, the work has been installed in ROM).
-
-The requirement to provide Installation Information does not include a requirement to continue to provide support service, warranty, or updates for a work that has been modified or installed by the recipient, or for the User Product in which it has been modified or installed. Access to a network may be denied when the modification itself materially and adversely affects the operation of the network or violates the rules and protocols for communication across the network.
-
-Corresponding Source conveyed, and Installation Information provided, in accord with this section must be in a format that is publicly documented (and with an implementation available to the public in source code form), and must require no special password or key for unpacking, reading or copying.
-
-7. Additional Terms.
-“Additional permissions” are terms that supplement the terms of this License by making exceptions from one or more of its conditions. Additional permissions that are applicable to the entire Program shall be treated as though they were included in this License, to the extent that they are valid under applicable law. If additional permissions apply only to part of the Program, that part may be used separately under those permissions, but the entire Program remains governed by this License without regard to the additional permissions.
-
-When you convey a copy of a covered work, you may at your option remove any additional permissions from that copy, or from any part of it. (Additional permissions may be written to require their own removal in certain cases when you modify the work.) You may place additional permissions on material, added by you to a covered work, for which you have or can give appropriate copyright permission.
-
-Notwithstanding any other provision of this License, for material you add to a covered work, you may (if authorized by the copyright holders of that material) supplement the terms of this License with terms:
-
-     a) Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License; or
-
-     b) Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by works containing it; or
-
-     c) Prohibiting misrepresentation of the origin of that material, or requiring that modified versions of such material be marked in reasonable ways as different from the original version; or
-
-     d) Limiting the use for publicity purposes of names of licensors or authors of the material; or
-
-     e) Declining to grant rights under trademark law for use of some trade names, trademarks, or service marks; or
-
-     f) Requiring indemnification of licensors and authors of that material by anyone who conveys the material (or modified versions of it) with contractual assumptions of liability to the recipient, for any liability that these contractual assumptions directly impose on those licensors and authors.
-
-All other non-permissive additional terms are considered “further restrictions” within the meaning of section 10. If the Program as you received it, or any part of it, contains a notice stating that it is governed by this License along with a term that is a further restriction, you may remove that term. If a license document contains a further restriction but permits relicensing or conveying under this License, you may add to a covered work material governed by the terms of that license document, provided that the further restriction does not survive such relicensing or conveying.
-
-If you add terms to a covered work in accord with this section, you must place, in the relevant source files, a statement of the additional terms that apply to those files, or a notice indicating where to find the applicable terms.
-
-Additional terms, permissive or non-permissive, may be stated in the form of a separately written license, or stated as exceptions; the above requirements apply either way.
-
-8. Termination.
-You may not propagate or modify a covered work except as expressly provided under this License. Any attempt otherwise to propagate or modify it is void, and will automatically terminate your rights under this License (including any patent licenses granted under the third paragraph of section 11).
-
-However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a) provisionally, unless and until the copyright holder explicitly and finally terminates your license, and (b) permanently, if the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation.
-
-Moreover, your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you of the violation by some reasonable means, this is the first time you have received notice of violation of this License (for any work) from that copyright holder, and you cure the violation prior to 30 days after your receipt of the notice.
-
-Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights from you under this License. If your rights have been terminated and not permanently reinstated, you do not qualify to receive new licenses for the same material under section 10.
-
-9. Acceptance Not Required for Having Copies.
-You are not required to accept this License in order to receive or run a copy of the Program. Ancillary propagation of a covered work occurring solely as a consequence of using peer-to-peer transmission to receive a copy likewise does not require acceptance. However, nothing other than this License grants you permission to propagate or modify any covered work. These actions infringe copyright if you do not accept this License. Therefore, by modifying or propagating a covered work, you indicate your acceptance of this License to do so.
-
-10. Automatic Licensing of Downstream Recipients.
-Each time you convey a covered work, the recipient automatically receives a license from the original licensors, to run, modify and propagate that work, subject to this License. You are not responsible for enforcing compliance by third parties with this License.
-
-An “entity transaction” is a transaction transferring control of an organization, or substantially all assets of one, or subdividing an organization, or merging organizations. If propagation of a covered work results from an entity transaction, each party to that transaction who receives a copy of the work also receives whatever licenses to the work the party's predecessor in interest had or could give under the previous paragraph, plus a right to possession of the Corresponding Source of the work from the predecessor in interest, if the predecessor has it or can get it with reasonable efforts.
-
-You may not impose any further restrictions on the exercise of the rights granted or affirmed under this License. For example, you may not impose a license fee, royalty, or other charge for exercise of rights granted under this License, and you may not initiate litigation (including a cross-claim or counterclaim in a lawsuit) alleging that any patent claim is infringed by making, using, selling, offering for sale, or importing the Program or any portion of it.
-
-11. Patents.
-A “contributor” is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based. The work thus licensed is called the contributor's “contributor version”.
-
-A contributor's “essential patent claims” are all patent claims owned or controlled by the contributor, whether already acquired or hereafter acquired, that would be infringed by some manner, permitted by this License, of making, using, or selling its contributor version, but do not include claims that would be infringed only as a consequence of further modification of the contributor version. For purposes of this definition, “control” includes the right to grant patent sublicenses in a manner consistent with the requirements of this License.
-
-Each contributor grants you a non-exclusive, worldwide, royalty-free patent license under the contributor's essential patent claims, to make, use, sell, offer for sale, import and otherwise run, modify and propagate the contents of its contributor version.
-
-In the following three paragraphs, a “patent license” is any express agreement or commitment, however denominated, not to enforce a patent (such as an express permission to practice a patent or covenant not to sue for patent infringement). To “grant” such a patent license to a party means to make such an agreement or commitment not to enforce a patent against the party.
-
-If you convey a covered work, knowingly relying on a patent license, and the Corresponding Source of the work is not available for anyone to copy, free of charge and under the terms of this License, through a publicly available network server or other readily accessible means, then you must either (1) cause the Corresponding Source to be so available, or (2) arrange to deprive yourself of the benefit of the patent license for this particular work, or (3) arrange, in a manner consistent with the requirements of this License, to extend the patent license to downstream recipients. “Knowingly relying” means you have actual knowledge that, but for the patent license, your conveying the covered work in a country, or your recipient's use of the covered work in a country, would infringe one or more identifiable patents in that country that you have reason to believe are valid.
-
-If, pursuant to or in connection with a single transaction or arrangement, you convey, or propagate by procuring conveyance of, a covered work, and grant a patent license to some of the parties receiving the covered work authorizing them to use, propagate, modify or convey a specific copy of the covered work, then the patent license you grant is automatically extended to all recipients of the covered work and works based on it.
-
-A patent license is “discriminatory” if it does not include within the scope of its coverage, prohibits the exercise of, or is conditioned on the non-exercise of one or more of the rights that are specifically granted under this License. You may not convey a covered work if you are a party to an arrangement with a third party that is in the business of distributing software, under which you make payment to the third party based on the extent of your activity of conveying the work, and under which the third party grants, to any of the parties who would receive the covered work from you, a discriminatory patent license (a) in connection with copies of the covered work conveyed by you (or copies made from those copies), or (b) primarily for and in connection with specific products or compilations that contain the covered work, unless you entered into that arrangement, or that patent license was granted, prior to 28 March 2007.
-
-Nothing in this License shall be construed as excluding or limiting any implied license or other defenses to infringement that may otherwise be available to you under applicable patent law.
-
-12. No Surrender of Others' Freedom.
-If conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot convey a covered work so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not convey it at all. For example, if you agree to terms that obligate you to collect a royalty for further conveying from those to whom you convey the Program, the only way you could satisfy both those terms and this License would be to refrain entirely from conveying the Program.
-
-13. Use with the GNU Affero General Public License.
-Notwithstanding any other provision of this License, you have permission to link or combine any covered work with a work licensed under version 3 of the GNU Affero General Public License into a single combined work, and to convey the resulting work. The terms of this License will continue to apply to the part which is the covered work, but the special requirements of the GNU Affero General Public License, section 13, concerning interaction through a network will apply to the combination as such.
-
-14. Revised Versions of this License.
-The Free Software Foundation may publish revised and/or new versions of the GNU General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.
-
-Each version is given a distinguishing version number. If the Program specifies that a certain numbered version of the GNU General Public License “or any later version” applies to it, you have the option of following the terms and conditions either of that numbered version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of the GNU General Public License, you may choose any version ever published by the Free Software Foundation.
-
-If the Program specifies that a proxy can decide which future versions of the GNU General Public License can be used, that proxy's public statement of acceptance of a version permanently authorizes you to choose that version for the Program.
-
-Later license versions may give you additional or different permissions. However, no additional obligations are imposed on any author or copyright holder as a result of your choosing to follow a later version.
-
-15. Disclaimer of Warranty.
-THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
-
-16. Limitation of Liability.
-IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-
-17. Interpretation of Sections 15 and 16.
-If the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect according to their terms, reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with the Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee.
-
-END OF TERMS AND CONDITIONS
-
-How to Apply These Terms to Your New Programs
-
-If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms.
-
-To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively state the exclusion of warranty; and each file should have at least the “copyright” line and a pointer to where the full notice is found.
-
-     <one line to give the program's name and a brief idea of what it does.>
-     Copyright (C) <year>  <name of author>
-
-     This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
-
-     This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-
-     You should have received a copy of the GNU General Public License along with this program.  If not, see <http://www.gnu.org/licenses/>.
+                    GNU GENERAL PUBLIC LICENSE
+                       Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+                            Preamble
+
+  The GNU General Public License is a free, copyleft license for
+software and other kinds of works.
+
+  The licenses for most software and other practical works are designed
+to take away your freedom to share and change the works.  By contrast,
+the GNU General Public License is intended to guarantee your freedom to
+share and change all versions of a program--to make sure it remains free
+software for all its users.  We, the Free Software Foundation, use the
+GNU General Public License for most of our software; it applies also to
+any other work released this way by its authors.  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+them if you wish), that you receive source code or can get it if you
+want it, that you can change the software or use pieces of it in new
+free programs, and that you know you can do these things.
+
+  To protect your rights, we need to prevent others from denying you
+these rights or asking you to surrender the rights.  Therefore, you have
+certain responsibilities if you distribute copies of the software, or if
+you modify it: responsibilities to respect the freedom of others.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must pass on to the recipients the same
+freedoms that you received.  You must make sure that they, too, receive
+or can get the source code.  And you must show them these terms so they
+know their rights.
+
+  Developers that use the GNU GPL protect your rights with two steps:
+(1) assert copyright on the software, and (2) offer you this License
+giving you legal permission to copy, distribute and/or modify it.
+
+  For the developers' and authors' protection, the GPL clearly explains
+that there is no warranty for this free software.  For both users' and
+authors' sake, the GPL requires that modified versions be marked as
+changed, so that their problems will not be attributed erroneously to
+authors of previous versions.
+
+  Some devices are designed to deny users access to install or run
+modified versions of the software inside them, although the manufacturer
+can do so.  This is fundamentally incompatible with the aim of
+protecting users' freedom to change the software.  The systematic
+pattern of such abuse occurs in the area of products for individuals to
+use, which is precisely where it is most unacceptable.  Therefore, we
+have designed this version of the GPL to prohibit the practice for those
+products.  If such problems arise substantially in other domains, we
+stand ready to extend this provision to those domains in future versions
+of the GPL, as needed to protect the freedom of users.
+
+  Finally, every program is threatened constantly by software patents.
+States should not allow patents to restrict development and use of
+software on general-purpose computers, but in those that do, we wish to
+avoid the special danger that patents applied to a free program could
+make it effectively proprietary.  To prevent this, the GPL assures that
+patents cannot be used to render the program non-free.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+                       TERMS AND CONDITIONS
+
+  0. Definitions.
+
+  "This License" refers to version 3 of the GNU General Public License.
+
+  "Copyright" also means copyright-like laws that apply to other kinds of
+works, such as semiconductor masks.
+
+  "The Program" refers to any copyrightable work licensed under this
+License.  Each licensee is addressed as "you".  "Licensees" and
+"recipients" may be individuals or organizations.
+
+  To "modify" a work means to copy from or adapt all or part of the work
+in a fashion requiring copyright permission, other than the making of an
+exact copy.  The resulting work is called a "modified version" of the
+earlier work or a work "based on" the earlier work.
+
+  A "covered work" means either the unmodified Program or a work based
+on the Program.
+
+  To "propagate" a work means to do anything with it that, without
+permission, would make you directly or secondarily liable for
+infringement under applicable copyright law, except executing it on a
+computer or modifying a private copy.  Propagation includes copying,
+distribution (with or without modification), making available to the
+public, and in some countries other activities as well.
+
+  To "convey" a work means any kind of propagation that enables other
+parties to make or receive copies.  Mere interaction with a user through
+a computer network, with no transfer of a copy, is not conveying.
+
+  An interactive user interface displays "Appropriate Legal Notices"
+to the extent that it includes a convenient and prominently visible
+feature that (1) displays an appropriate copyright notice, and (2)
+tells the user that there is no warranty for the work (except to the
+extent that warranties are provided), that licensees may convey the
+work under this License, and how to view a copy of this License.  If
+the interface presents a list of user commands or options, such as a
+menu, a prominent item in the list meets this criterion.
+
+  1. Source Code.
+
+  The "source code" for a work means the preferred form of the work
+for making modifications to it.  "Object code" means any non-source
+form of a work.
+
+  A "Standard Interface" means an interface that either is an official
+standard defined by a recognized standards body, or, in the case of
+interfaces specified for a particular programming language, one that
+is widely used among developers working in that language.
+
+  The "System Libraries" of an executable work include anything, other
+than the work as a whole, that (a) is included in the normal form of
+packaging a Major Component, but which is not part of that Major
+Component, and (b) serves only to enable use of the work with that
+Major Component, or to implement a Standard Interface for which an
+implementation is available to the public in source code form.  A
+"Major Component", in this context, means a major essential component
+(kernel, window system, and so on) of the specific operating system
+(if any) on which the executable work runs, or a compiler used to
+produce the work, or an object code interpreter used to run it.
+
+  The "Corresponding Source" for a work in object code form means all
+the source code needed to generate, install, and (for an executable
+work) run the object code and to modify the work, including scripts to
+control those activities.  However, it does not include the work's
+System Libraries, or general-purpose tools or generally available free
+programs which are used unmodified in performing those activities but
+which are not part of the work.  For example, Corresponding Source
+includes interface definition files associated with source files for
+the work, and the source code for shared libraries and dynamically
+linked subprograms that the work is specifically designed to require,
+such as by intimate data communication or control flow between those
+subprograms and other parts of the work.
+
+  The Corresponding Source need not include anything that users
+can regenerate automatically from other parts of the Corresponding
+Source.
+
+  The Corresponding Source for a work in source code form is that
+same work.
+
+  2. Basic Permissions.
+
+  All rights granted under this License are granted for the term of
+copyright on the Program, and are irrevocable provided the stated
+conditions are met.  This License explicitly affirms your unlimited
+permission to run the unmodified Program.  The output from running a
+covered work is covered by this License only if the output, given its
+content, constitutes a covered work.  This License acknowledges your
+rights of fair use or other equivalent, as provided by copyright law.
+
+  You may make, run and propagate covered works that you do not
+convey, without conditions so long as your license otherwise remains
+in force.  You may convey covered works to others for the sole purpose
+of having them make modifications exclusively for you, or provide you
+with facilities for running those works, provided that you comply with
+the terms of this License in conveying all material for which you do
+not control copyright.  Those thus making or running the covered works
+for you must do so exclusively on your behalf, under your direction
+and control, on terms that prohibit them from making any copies of
+your copyrighted material outside their relationship with you.
+
+  Conveying under any other circumstances is permitted solely under
+the conditions stated below.  Sublicensing is not allowed; section 10
+makes it unnecessary.
+
+  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
+
+  No covered work shall be deemed part of an effective technological
+measure under any applicable law fulfilling obligations under article
+11 of the WIPO copyright treaty adopted on 20 December 1996, or
+similar laws prohibiting or restricting circumvention of such
+measures.
+
+  When you convey a covered work, you waive any legal power to forbid
+circumvention of technological measures to the extent such circumvention
+is effected by exercising rights under this License with respect to
+the covered work, and you disclaim any intention to limit operation or
+modification of the work as a means of enforcing, against the work's
+users, your or third parties' legal rights to forbid circumvention of
+technological measures.
+
+  4. Conveying Verbatim Copies.
+
+  You may convey verbatim copies of the Program's source code as you
+receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice;
+keep intact all notices stating that this License and any
+non-permissive terms added in accord with section 7 apply to the code;
+keep intact all notices of the absence of any warranty; and give all
+recipients a copy of this License along with the Program.
+
+  You may charge any price or no price for each copy that you convey,
+and you may offer support or warranty protection for a fee.
+
+  5. Conveying Modified Source Versions.
+
+  You may convey a work based on the Program, or the modifications to
+produce it from the Program, in the form of source code under the
+terms of section 4, provided that you also meet all of these conditions:
+
+    a) The work must carry prominent notices stating that you modified
+    it, and giving a relevant date.
+
+    b) The work must carry prominent notices stating that it is
+    released under this License and any conditions added under section
+    7.  This requirement modifies the requirement in section 4 to
+    "keep intact all notices".
+
+    c) You must license the entire work, as a whole, under this
+    License to anyone who comes into possession of a copy.  This
+    License will therefore apply, along with any applicable section 7
+    additional terms, to the whole of the work, and all its parts,
+    regardless of how they are packaged.  This License gives no
+    permission to license the work in any other way, but it does not
+    invalidate such permission if you have separately received it.
+
+    d) If the work has interactive user interfaces, each must display
+    Appropriate Legal Notices; however, if the Program has interactive
+    interfaces that do not display Appropriate Legal Notices, your
+    work need not make them do so.
+
+  A compilation of a covered work with other separate and independent
+works, which are not by their nature extensions of the covered work,
+and which are not combined with it such as to form a larger program,
+in or on a volume of a storage or distribution medium, is called an
+"aggregate" if the compilation and its resulting copyright are not
+used to limit the access or legal rights of the compilation's users
+beyond what the individual works permit.  Inclusion of a covered work
+in an aggregate does not cause this License to apply to the other
+parts of the aggregate.
+
+  6. Conveying Non-Source Forms.
+
+  You may convey a covered work in object code form under the terms
+of sections 4 and 5, provided that you also convey the
+machine-readable Corresponding Source under the terms of this License,
+in one of these ways:
+
+    a) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by the
+    Corresponding Source fixed on a durable physical medium
+    customarily used for software interchange.
+
+    b) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by a
+    written offer, valid for at least three years and valid for as
+    long as you offer spare parts or customer support for that product
+    model, to give anyone who possesses the object code either (1) a
+    copy of the Corresponding Source for all the software in the
+    product that is covered by this License, on a durable physical
+    medium customarily used for software interchange, for a price no
+    more than your reasonable cost of physically performing this
+    conveying of source, or (2) access to copy the
+    Corresponding Source from a network server at no charge.
+
+    c) Convey individual copies of the object code with a copy of the
+    written offer to provide the Corresponding Source.  This
+    alternative is allowed only occasionally and noncommercially, and
+    only if you received the object code with such an offer, in accord
+    with subsection 6b.
+
+    d) Convey the object code by offering access from a designated
+    place (gratis or for a charge), and offer equivalent access to the
+    Corresponding Source in the same way through the same place at no
+    further charge.  You need not require recipients to copy the
+    Corresponding Source along with the object code.  If the place to
+    copy the object code is a network server, the Corresponding Source
+    may be on a different server (operated by you or a third party)
+    that supports equivalent copying facilities, provided you maintain
+    clear directions next to the object code saying where to find the
+    Corresponding Source.  Regardless of what server hosts the
+    Corresponding Source, you remain obligated to ensure that it is
+    available for as long as needed to satisfy these requirements.
+
+    e) Convey the object code using peer-to-peer transmission, provided
+    you inform other peers where the object code and Corresponding
+    Source of the work are being offered to the general public at no
+    charge under subsection 6d.
+
+  A separable portion of the object code, whose source code is excluded
+from the Corresponding Source as a System Library, need not be
+included in conveying the object code work.
+
+  A "User Product" is either (1) a "consumer product", which means any
+tangible personal property which is normally used for personal, family,
+or household purposes, or (2) anything designed or sold for incorporation
+into a dwelling.  In determining whether a product is a consumer product,
+doubtful cases shall be resolved in favor of coverage.  For a particular
+product received by a particular user, "normally used" refers to a
+typical or common use of that class of product, regardless of the status
+of the particular user or of the way in which the particular user
+actually uses, or expects or is expected to use, the product.  A product
+is a consumer product regardless of whether the product has substantial
+commercial, industrial or non-consumer uses, unless such uses represent
+the only significant mode of use of the product.
+
+  "Installation Information" for a User Product means any methods,
+procedures, authorization keys, or other information required to install
+and execute modified versions of a covered work in that User Product from
+a modified version of its Corresponding Source.  The information must
+suffice to ensure that the continued functioning of the modified object
+code is in no case prevented or interfered with solely because
+modification has been made.
+
+  If you convey an object code work under this section in, or with, or
+specifically for use in, a User Product, and the conveying occurs as
+part of a transaction in which the right of possession and use of the
+User Product is transferred to the recipient in perpetuity or for a
+fixed term (regardless of how the transaction is characterized), the
+Corresponding Source conveyed under this section must be accompanied
+by the Installation Information.  But this requirement does not apply
+if neither you nor any third party retains the ability to install
+modified object code on the User Product (for example, the work has
+been installed in ROM).
+
+  The requirement to provide Installation Information does not include a
+requirement to continue to provide support service, warranty, or updates
+for a work that has been modified or installed by the recipient, or for
+the User Product in which it has been modified or installed.  Access to a
+network may be denied when the modification itself materially and
+adversely affects the operation of the network or violates the rules and
+protocols for communication across the network.
+
+  Corresponding Source conveyed, and Installation Information provided,
+in accord with this section must be in a format that is publicly
+documented (and with an implementation available to the public in
+source code form), and must require no special password or key for
+unpacking, reading or copying.
+
+  7. Additional Terms.
+
+  "Additional permissions" are terms that supplement the terms of this
+License by making exceptions from one or more of its conditions.
+Additional permissions that are applicable to the entire Program shall
+be treated as though they were included in this License, to the extent
+that they are valid under applicable law.  If additional permissions
+apply only to part of the Program, that part may be used separately
+under those permissions, but the entire Program remains governed by
+this License without regard to the additional permissions.
+
+  When you convey a copy of a covered work, you may at your option
+remove any additional permissions from that copy, or from any part of
+it.  (Additional permissions may be written to require their own
+removal in certain cases when you modify the work.)  You may place
+additional permissions on material, added by you to a covered work,
+for which you have or can give appropriate copyright permission.
+
+  Notwithstanding any other provision of this License, for material you
+add to a covered work, you may (if authorized by the copyright holders of
+that material) supplement the terms of this License with terms:
+
+    a) Disclaiming warranty or limiting liability differently from the
+    terms of sections 15 and 16 of this License; or
+
+    b) Requiring preservation of specified reasonable legal notices or
+    author attributions in that material or in the Appropriate Legal
+    Notices displayed by works containing it; or
+
+    c) Prohibiting misrepresentation of the origin of that material, or
+    requiring that modified versions of such material be marked in
+    reasonable ways as different from the original version; or
+
+    d) Limiting the use for publicity purposes of names of licensors or
+    authors of the material; or
+
+    e) Declining to grant rights under trademark law for use of some
+    trade names, trademarks, or service marks; or
+
+    f) Requiring indemnification of licensors and authors of that
+    material by anyone who conveys the material (or modified versions of
+    it) with contractual assumptions of liability to the recipient, for
+    any liability that these contractual assumptions directly impose on
+    those licensors and authors.
+
+  All other non-permissive additional terms are considered "further
+restrictions" within the meaning of section 10.  If the Program as you
+received it, or any part of it, contains a notice stating that it is
+governed by this License along with a term that is a further
+restriction, you may remove that term.  If a license document contains
+a further restriction but permits relicensing or conveying under this
+License, you may add to a covered work material governed by the terms
+of that license document, provided that the further restriction does
+not survive such relicensing or conveying.
+
+  If you add terms to a covered work in accord with this section, you
+must place, in the relevant source files, a statement of the
+additional terms that apply to those files, or a notice indicating
+where to find the applicable terms.
+
+  Additional terms, permissive or non-permissive, may be stated in the
+form of a separately written license, or stated as exceptions;
+the above requirements apply either way.
+
+  8. Termination.
+
+  You may not propagate or modify a covered work except as expressly
+provided under this License.  Any attempt otherwise to propagate or
+modify it is void, and will automatically terminate your rights under
+this License (including any patent licenses granted under the third
+paragraph of section 11).
+
+  However, if you cease all violation of this License, then your
+license from a particular copyright holder is reinstated (a)
+provisionally, unless and until the copyright holder explicitly and
+finally terminates your license, and (b) permanently, if the copyright
+holder fails to notify you of the violation by some reasonable means
+prior to 60 days after the cessation.
+
+  Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+  Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License.  If your rights have been terminated and not permanently
+reinstated, you do not qualify to receive new licenses for the same
+material under section 10.
+
+  9. Acceptance Not Required for Having Copies.
+
+  You are not required to accept this License in order to receive or
+run a copy of the Program.  Ancillary propagation of a covered work
+occurring solely as a consequence of using peer-to-peer transmission
+to receive a copy likewise does not require acceptance.  However,
+nothing other than this License grants you permission to propagate or
+modify any covered work.  These actions infringe copyright if you do
+not accept this License.  Therefore, by modifying or propagating a
+covered work, you indicate your acceptance of this License to do so.
+
+  10. Automatic Licensing of Downstream Recipients.
+
+  Each time you convey a covered work, the recipient automatically
+receives a license from the original licensors, to run, modify and
+propagate that work, subject to this License.  You are not responsible
+for enforcing compliance by third parties with this License.
+
+  An "entity transaction" is a transaction transferring control of an
+organization, or substantially all assets of one, or subdividing an
+organization, or merging organizations.  If propagation of a covered
+work results from an entity transaction, each party to that
+transaction who receives a copy of the work also receives whatever
+licenses to the work the party's predecessor in interest had or could
+give under the previous paragraph, plus a right to possession of the
+Corresponding Source of the work from the predecessor in interest, if
+the predecessor has it or can get it with reasonable efforts.
+
+  You may not impose any further restrictions on the exercise of the
+rights granted or affirmed under this License.  For example, you may
+not impose a license fee, royalty, or other charge for exercise of
+rights granted under this License, and you may not initiate litigation
+(including a cross-claim or counterclaim in a lawsuit) alleging that
+any patent claim is infringed by making, using, selling, offering for
+sale, or importing the Program or any portion of it.
+
+  11. Patents.
+
+  A "contributor" is a copyright holder who authorizes use under this
+License of the Program or a work on which the Program is based.  The
+work thus licensed is called the contributor's "contributor version".
+
+  A contributor's "essential patent claims" are all patent claims
+owned or controlled by the contributor, whether already acquired or
+hereafter acquired, that would be infringed by some manner, permitted
+by this License, of making, using, or selling its contributor version,
+but do not include claims that would be infringed only as a
+consequence of further modification of the contributor version.  For
+purposes of this definition, "control" includes the right to grant
+patent sublicenses in a manner consistent with the requirements of
+this License.
+
+  Each contributor grants you a non-exclusive, worldwide, royalty-free
+patent license under the contributor's essential patent claims, to
+make, use, sell, offer for sale, import and otherwise run, modify and
+propagate the contents of its contributor version.
+
+  In the following three paragraphs, a "patent license" is any express
+agreement or commitment, however denominated, not to enforce a patent
+(such as an express permission to practice a patent or covenant not to
+sue for patent infringement).  To "grant" such a patent license to a
+party means to make such an agreement or commitment not to enforce a
+patent against the party.
+
+  If you convey a covered work, knowingly relying on a patent license,
+and the Corresponding Source of the work is not available for anyone
+to copy, free of charge and under the terms of this License, through a
+publicly available network server or other readily accessible means,
+then you must either (1) cause the Corresponding Source to be so
+available, or (2) arrange to deprive yourself of the benefit of the
+patent license for this particular work, or (3) arrange, in a manner
+consistent with the requirements of this License, to extend the patent
+license to downstream recipients.  "Knowingly relying" means you have
+actual knowledge that, but for the patent license, your conveying the
+covered work in a country, or your recipient's use of the covered work
+in a country, would infringe one or more identifiable patents in that
+country that you have reason to believe are valid.
+
+  If, pursuant to or in connection with a single transaction or
+arrangement, you convey, or propagate by procuring conveyance of, a
+covered work, and grant a patent license to some of the parties
+receiving the covered work authorizing them to use, propagate, modify
+or convey a specific copy of the covered work, then the patent license
+you grant is automatically extended to all recipients of the covered
+work and works based on it.
+
+  A patent license is "discriminatory" if it does not include within
+the scope of its coverage, prohibits the exercise of, or is
+conditioned on the non-exercise of one or more of the rights that are
+specifically granted under this License.  You may not convey a covered
+work if you are a party to an arrangement with a third party that is
+in the business of distributing software, under which you make payment
+to the third party based on the extent of your activity of conveying
+the work, and under which the third party grants, to any of the
+parties who would receive the covered work from you, a discriminatory
+patent license (a) in connection with copies of the covered work
+conveyed by you (or copies made from those copies), or (b) primarily
+for and in connection with specific products or compilations that
+contain the covered work, unless you entered into that arrangement,
+or that patent license was granted, prior to 28 March 2007.
+
+  Nothing in this License shall be construed as excluding or limiting
+any implied license or other defenses to infringement that may
+otherwise be available to you under applicable patent law.
+
+  12. No Surrender of Others' Freedom.
+
+  If conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot convey a
+covered work so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you may
+not convey it at all.  For example, if you agree to terms that obligate you
+to collect a royalty for further conveying from those to whom you convey
+the Program, the only way you could satisfy both those terms and this
+License would be to refrain entirely from conveying the Program.
+
+  13. Use with the GNU Affero General Public License.
+
+  Notwithstanding any other provision of this License, you have
+permission to link or combine any covered work with a work licensed
+under version 3 of the GNU Affero General Public License into a single
+combined work, and to convey the resulting work.  The terms of this
+License will continue to apply to the part which is the covered work,
+but the special requirements of the GNU Affero General Public License,
+section 13, concerning interaction through a network will apply to the
+combination as such.
+
+  14. Revised Versions of this License.
+
+  The Free Software Foundation may publish revised and/or new versions of
+the GNU General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+  Each version is given a distinguishing version number.  If the
+Program specifies that a certain numbered version of the GNU General
+Public License "or any later version" applies to it, you have the
+option of following the terms and conditions either of that numbered
+version or of any later version published by the Free Software
+Foundation.  If the Program does not specify a version number of the
+GNU General Public License, you may choose any version ever published
+by the Free Software Foundation.
+
+  If the Program specifies that a proxy can decide which future
+versions of the GNU General Public License can be used, that proxy's
+public statement of acceptance of a version permanently authorizes you
+to choose that version for the Program.
+
+  Later license versions may give you additional or different
+permissions.  However, no additional obligations are imposed on any
+author or copyright holder as a result of your choosing to follow a
+later version.
+
+  15. Disclaimer of Warranty.
+
+  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
+APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
+HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
+OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
+THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
+IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
+ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. Limitation of Liability.
+
+  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
+THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
+GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
+USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
+DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
+PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
+EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGES.
+
+  17. Interpretation of Sections 15 and 16.
+
+  If the disclaimer of warranty and limitation of liability provided
+above cannot be given local legal effect according to their terms,
+reviewing courts shall apply local law that most closely approximates
+an absolute waiver of all civil liability in connection with the
+Program, unless a warranty or assumption of liability accompanies a
+copy of the Program in return for a fee.
+
+                     END OF TERMS AND CONDITIONS
+
+            How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+state the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <https://www.gnu.org/licenses/>.
 
 Also add information on how to contact you by electronic and paper mail.
 
-If the program does terminal interaction, make it output a short notice like this when it starts in an interactive mode:
+  If the program does terminal interaction, make it output a short
+notice like this when it starts in an interactive mode:
 
-     <program>  Copyright (C) <year>  <name of author>
-     This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-     This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details.
+    <program>  Copyright (C) <year>  <name of author>
+    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
 
-The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, your program's commands might be different; for a GUI interface, you would use an “about box”.
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, your program's commands
+might be different; for a GUI interface, you would use an "about box".
 
-You should also get your employer (if you work as a programmer) or school, if any, to sign a “copyright disclaimer” for the program, if necessary. For more information on this, and how to apply and follow the GNU GPL, see <http://www.gnu.org/licenses/>.
+  You should also get your employer (if you work as a programmer) or school,
+if any, to sign a "copyright disclaimer" for the program, if necessary.
+For more information on this, and how to apply and follow the GNU GPL, see
+<https://www.gnu.org/licenses/>.
 
-The GNU General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of this License. But first, please read <http://www.gnu.org/philosophy/why-not-lgpl.html>.
+  The GNU General Public License does not permit incorporating your program
+into proprietary programs.  If your program is a subroutine library, you
+may consider it more useful to permit linking proprietary applications with
+the library.  If this is what you want to do, use the GNU Lesser General
+Public License instead of this License.  But first, please read
+<https://www.gnu.org/licenses/why-not-lgpl.html>.

MAINTAINERS.md

@@ -0,0 +1,10 @@
+# Maintainers
+
+This file contains information about people permitted to make major decisions and direction on the project.
+
+## Contributing Under the DCO
+
+By adding your name and email address to this section, you certify that all of your subsequent contributions to the
+Buildable Stick System are made under the terms of the Developer's Certificate of Origin 1.1, available at `DCO.txt`.
+
+* Brian S. Stephan (<bss@incorporeal.org>)

Makefile

@@ -1,4 +1,5 @@
 SRC_FILES := $(wildcard ./src/*.scad)
+SRC_FILES := $(filter-out ./src/all-together-demo.scad, $(SRC_FILES))
 SRC_FILES := $(filter-out ./src/blown-up-demo.scad, $(SRC_FILES))
 SRC_FILES := $(filter-out ./src/components.scad, $(SRC_FILES))
 SRC_FILES := $(filter-out ./src/roundedcube.scad, $(SRC_FILES))

README.md

@@ -2,11 +2,16 @@
 
 Files for 3D printing an arcade stick.
 
-![An example of stick components displayed in OpenSCAD](docs/two-panel-example-v3.png)
+Have you ever wanted to conjure your own arcade stick out of the ether (well, plastic), or to prototype a new layout or
+design before sending it to a custom builder? Do you just love having your space filled with arcade stick enclosures,
+because you keep making different variants, colorways, and so on? Or do you simply want a good stick on the cheap, and
+know someone or a library with a 3D printer? The Buildable Stick System may be the project for you!
+
+![An example of stick components displayed in OpenSCAD](docs/blown-up-demo.png)
 
 [OpenSCAD-based illustration of how the components for an overhang panel-based stick fit together.]
 
-![A photo of a completed stick](docs/finished-v3.1.jpg)
+![A photo of a completed stick](docs/finished-v4.1.jpg)
 
 [Photo of a completed inset panel-based stick.]
 
@@ -22,12 +27,33 @@ component objects or create new ones. The OpenSCAD language is essentially a fun
 it easy to reuse, alter, and compose objects. If you do not see the object you would like, you can likely create it by
 starting with an existing object and constructing what you'd like with new or existing components.
 
+## Usage of Parts
+
+There are a lot of parts to pick from, but there are some structural variants to pay attention to; here's some help
+about when/how to use specific parts:
+
+* `panel-inset` --- these fit flush into a frame, creating a closed box enclosure.
+* `panel-overhang` --- these have a tray that fits into a frame with the actual face extending beyond the frame,
+  creating an ice cream sandwich enclosure.
+    * These also yield a bit more space inside the box, for tall levers or whatever.
+* `frame` (non-pieces) --- these create the box of the enclosure, as one part. These can be hard to print well ---
+  shrinkage forces tend to curl up the corners no matter what you do, and some points need supports --- but if you don't
+  care about that because you're printing an ice cream sandwich, they are simpler than...
+* `frame-piece` --- these break up the frame box into four faces, and are held together by friction fit and the hex
+  bolts. This is more stable than you might expect, but it does introduce some variability in the overall sturdiness of
+  the enclosure compared with the frame as one box piece.
+    * The `interconnect` replaces the need to bolt multiple frames together.
+
 ## Printing
 
 These items all fit on a 256mm^2 print bed; I use a Bambu Lab P1P based on what I've learned from the
 OpenStickCommunity. Standard settings seem sufficiently sturdy for my purposes, though the slicer has done a couple
 weird things, in my experience.
 
+My preferred settings are 3 wall loops with 20% gyroid sparse infill. This gives the models a bit more weight and
+stability, but something like 2 wall loops, 15% grid sparse infill is fine and does not lead to a weak enclosure. The
+costs below have been made against my settings.
+
 ## Assembling
 
 What you'll need beyond these objects:
@@ -36,12 +62,12 @@ What you'll need beyond these objects:
   Board](https://github.com/OpenStickCommunity/Hardware/tree/main/RP2040%20Advanced%20Breakout%20Board))
     * 4 M3 8mm hex bolts to secure the PCB to a panel
 * Per frame and plate combo:
-    * 4 40mm M4 hex brass standoffs (or equivalent)
+    * 4 45mm M4 hex brass standoffs (or equivalent)
     * 8 M4 countersunk hex bolts
         * Overhang plates should use 12-16mm length bolts since they are taller
         * Inset plates should probably use 8-12mm bolts --- some standoffs aren't threaded the whole way, making 16mm
           too long to go flush
-        * If making the 40mm standoffs from multiple smaller ones, make sure they have enough length to take your bolts!
+        * If making the 45mm standoffs from multiple smaller ones, make sure they have enough length to take your bolts!
 * Per frame connection point:
     * 8 16mm M4 bolts
     * 8 M4 flange nuts
@@ -59,29 +85,32 @@ What you'll need beyond these objects:
 This is a rough estimate of the cost to produce one of these sticks, assuming a usual 2-frame design and layout.
 Filament masses from Bambu Studio estimates, using Bambu PLA Basic.
 
-* Left and right frame: **$7.08 USD** (141.84g each, as of 2023-09-12)
-* Left and right (overhang) top panels: **~$6.74 USD** (~135g each, as of 2023-09-12)
-* Left and right (overhang) bottom panels: **$5.90 USD** (118.16g each, as of 2023-09-12)
-* Miscellaneous mounting plates, decorative plates, etc.: **~$1.00 USD** (~40g, as of 2023-09-12)
+* Left and right frame: **$10.42 USD** (208.50g each, as of 2024-02-22)
+* Left and right (inset) top panels: **~$6.40 USD** (~128g each, as of 2024-02-22)
+* Left and right (non-overhang) bottom panels: **$6.80 USD** (135.99g each, as of 2024-02-22)
+* Miscellaneous mounting plates, decorative plates, etc.: **~$1.83 USD** (~73g, as of 2024-02-22)
 * 8 16mm M4 bolts to connect the frames: **$0.72 USD** (you can get a pack of 100 on Amazon for $9, as of 2023-09-12)
+    * These are only necessary if you are using the whole frames, but as a heads up, the material cost of the
+      pieces-based interconnect piece costs around $1, so it's roughly a wash since that's also a frame wall.
 * 8 M4 flange nuts to connect the frames: **$0.68 USD** (you can get a pack of 100 on Amazon for $8.50, as of 2023-09-12)
 * 4 10mm M3 bolts to connect Neutrik D plates to frames: **$0.40 USD** (you can get a pack of 100 on Amazon for $10, as
   of 2023-09-12)
 * 4 M3 flange nuts to connect Neutrik D plates to frames: **$0.34 USD** (you can get a pack of 100 on Amazon for $8.50,
   as of 2023-09-12)
-* 8 40mm M4 spacers to connect panels to frames: **$2.40 USD** (you can get a pack of 10 on AliExpress for $3, as of
+* 8 45mm M4 standoffs to connect panels to frames: **$2.40 USD** (you can get a pack of 10 on AliExpress for $3, as of
   2023-09-12)
     * You could 3D print these too, but you're probably better off with brass ones as they give some weight to the
       stick anyway
-    * You can also use a shorter length with longer bolts, or combine multiple spacers, if either of those yield better
+    * You can also use a shorter length with longer bolts, or combine multiple standoffs, if either of those yield better
       prices
 * 8 16mm M4 bolts to connect top plates to frames: **$0.72 USD** (you can get a pack of 100 on Amazon for $9, as of
 * 8 12mm M4 bolts to connect bottom plates to frames: **$0.72 USD** (you can get a pack of 100 on Amazon for $9, as of
   2023-09-12)
 
-With an enclosure coming in around $26, depending on your choices --- say, ~$30 for TheTrain's RP2040 Advanced Breakout
+With an enclosure coming in around $31, depending on your choices --- say, ~$30 for TheTrain's RP2040 Advanced Breakout
 Board, ~$60 for Sanwa buttons and a lever, and ~$20 for miscellaneous connectors and wiring --- you can put a
-full-featured controller with an open source foundation together for around $135.
+full-featured controller with an open source foundation together for around $140. Reducing wall and infill settings
+will probably save you around $5 of material, and you can probably decide what you want to do from there.
 
 ## Miscellany
 
@@ -99,6 +128,14 @@ Improvements, variants, new layouts, novel ideas, and etc. are all welcome.
 These files are suitable for previewing and rendering in OpenSCAD. They may also work in FreeCAD and perhaps other
 software, but they are developed in OpenSCAD, so YMMV otherwise.
 
+This project is hosted at [my personal Git site](https://git.incorporeal.org/bss/buildable-stick-system), but people are
+more likely to want to interact with [the GitHub mirror](https://github.com/bsstephan/buildable-stick-system). Feel free
+to use either.
+
+I'm reachable on the fediverse, over email, or on Discord, but if you're looking for an option I prefer, I maintain an
+IRC channel, `#buildable-stick-system`, on [my IRC network, Randomus](https://randomus.net/) if you would like a place
+to hang out and discuss issues and features and whatnot.
+
 ## Attribution
 
 Inspired by the incredible work of [TheTrain](https://github.com/TheTrainGoes) on the [OpenStickCommunity Fightstick

TODO.md

@@ -2,10 +2,6 @@
 
 Notes for "next time".
 
-## v4
+## v4.x
 
 * Engraving some cosmetic stuff? Or maybe a place to mount other plates?
-* Try making it so top plates are bolted in from the side of the frame rather than the top
-    * I'm thinking of abandoning this, because it makes the frame more complicated to have a portion of a column rather
-      than the full column, but I'll keep it here for a bit longer
-* Try making frames out of four pieces connected at joints on the hex posts, rather than one large piece?

docs/assembly-and-tips.md

@@ -0,0 +1,19 @@
+# Assembly and Tips
+
+Just some miscellaneous notes for any dear reader, or more likely, my own forgetful self.
+
+## Removing Inset Panels
+
+As of v4.1 (or in v3), the top and bottom inset panels both insert into the frame, inside the frame "lip", meaning that
+when everything is put together, they create a flush surface (more or less). This can make them hard to get out, as you
+can't grab anything to get any leverage, and especially with v4.1, the plastic posts to aid the friction fit make it
+even harder to muscle out --- in fact, even if you could get an edge and start yanking, you'd probably just break some
+of the plastic.
+
+You can instead use the reverse side and the hex standoffs to push a panel out, as so:
+
+1. Loosen, or completely remove, the hex bolts for the panel you would like to remove.
+2. Flip the stick over, and remove the hex bolts on the opposite side.
+3. Screw in longer bolts, or anything else that'll fit into the hole without going flush against the panel.
+4. Push the long bolts in, thus pushing the standoffs, thus pushing the desired panel out from within.
+5. You may have to even get a mallet and tap on a bolt, occasionally, as everything can be *pretty* tight.

docs/materials.md

@@ -21,4 +21,5 @@ bss's random thoughts and notes on 3D printing materials.
 
 ## Hatchbox PLA
 
-* Haven't done a lot of this yet, but my wife really likes the blue.
+* **Blue:** very blue. Wife likes it.
+* **White:** more opaque than the Bambu PLA mentioned above, makes a pretty decent (still slightly translucent) frame.

src/blown-up-demo.scad

@@ -1,39 +1,27 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 use <frame-left.scad>
 use <frame-right.scad>
-use <top-panel-left-lever-and-dir_arc-plus-w-30mm.scad>
-use <top-panel-right-sega-2p-plus-one-plus-control-with-mount.scad>
-use <bottom-panel-left.scad>
-use <bottom-panel-right.scad>
+use <top-panel-overhang-left-lever-and-dir_arc-plus-w-30mm.scad>
+use <top-panel-overhang-right-sega-2p-plus-one-plus-control-with-mount.scad>
+use <bottom-panel-overhang-left.scad>
+use <bottom-panel-overhang-right.scad>
 use <misc-decorative-plate-24mm-button.scad>
 use <misc-decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one.scad>
 use <misc-dustwasher-lsx-nobi.scad>
 
-color("#C12E1F") translate([-top_plate_x/2-25, 0, frame_z/2+75]) top_panel_left_lever_and_dir_arc_w_30mm();
-color("#C12E1F") translate([top_plate_x/2+25, 0, frame_z/2+75]) top_panel_right_sega_2p_plus_one_plus_control_with_mount();
+color("#C12E1F") translate([-panel_x/2-25, 0, frame_z/2+75]) top_panel_left_lever_and_dir_arc_w_30mm();
+color("#C12E1F") translate([panel_x/2+25, 0, frame_z/2+75]) top_panel_right_sega_2p_plus_one_plus_control_with_mount();
 color("black") translate([-frame_x/2+5-25, 0, -2.5]) left_frame();
 color("black") translate([frame_x/2+25, 0, -2.5]) right_frame();
-color("#C12E1F") translate([-top_plate_x/2-25, 0, -5-frame_z/2-75]) bottom_panel_left();
-color("#C12E1F") translate([top_plate_x/2+25, 0, -5-frame_z/2-75]) bottom_panel_right();
+color("#C12E1F") translate([-panel_x/2-25, 0, -5-frame_z/2-75]) bottom_panel_left();
+color("#C12E1F") translate([panel_x/2+25, 0, -5-frame_z/2-75]) bottom_panel_right();
 
 color("black") translate([0, 0, 3+frame_z/2+150]) dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate();
 color("black") translate([-195, 25, 3+frame_z/2+150]) lsx_nobi_dustwasher();
-color("black") translate([top_plate_x, 25, 3+frame_z/2+150]) button_24mm_decorative_plate();
+color("black") translate([panel_x, 25, 3+frame_z/2+150]) button_24mm_decorative_plate();

src/bottom-panel-inset.scad

@@ -1,28 +1,9 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
-module bottom_panel() {
-	difference() {
-		mirror([0, 0, 1]) topplate();
-		translate([0, 0, top_plate_z/2]) cube([top_plate_x-40, top_plate_y-40, top_plate_z], center=true);
-	}
-}
-
 bottom_panel();

src/bottom-panel-left.scad

@@ -1,30 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <components.scad>
-use <bottom-panel-solo.scad>
-
-module bottom_panel_left() {
-	difference() {
-		bottom_panel_solo();
-		// chop the right edge off
-		side_chopper();
-	}
-}
-
-bottom_panel_left();

src/bottom-panel-middle.scad

@@ -1,30 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <components.scad>
-use <bottom-panel-left.scad>
-use <bottom-panel-right.scad>
-
-module bottom_panel_middle() {
-	intersection() {
-		bottom_panel_left();
-		bottom_panel_right();
-	}
-}
-
-bottom_panel_middle();

src/bottom-panel-overhang-left.scad

@@ -0,0 +1,18 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <bottom-panel-overhang-solo.scad>
+
+module bottom_panel_left() {
+	difference() {
+		bottom_panel_solo();
+		// chop the right edge off
+		side_chopper();
+	}
+}
+
+bottom_panel_left();

src/bottom-panel-overhang-middle.scad

@@ -0,0 +1,18 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <bottom-panel-overhang-left.scad>
+use <bottom-panel-overhang-right.scad>
+
+module bottom_panel_middle() {
+	intersection() {
+		bottom_panel_left();
+		bottom_panel_right();
+	}
+}
+
+bottom_panel_middle();

src/bottom-panel-overhang-right.scad

@@ -0,0 +1,14 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <bottom-panel-overhang-left.scad>
+
+module bottom_panel_right() {
+	rotate([0, 0, 180]) bottom_panel_left();
+}
+
+bottom_panel_right();

src/bottom-panel-overhang-solo.scad

@@ -0,0 +1,16 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+
+module bottom_panel_solo() {
+	difference() {
+		rotate([180, 0, 0]) base_panel_with_raised_overhang();
+		rotate([180, 0, 0]) panel_holes();
+	}
+}
+
+bottom_panel_solo();

src/bottom-panel-right.scad

@@ -1,26 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <components.scad>
-use <bottom-panel-left.scad>
-
-module bottom_panel_right() {
-	rotate([0, 0, 180]) bottom_panel_left();
-}
-
-bottom_panel_right();

src/bottom-panel-solo.scad

@@ -1,28 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <components.scad>
-
-module bottom_panel_solo() {
-	difference() {
-		bottom_plate_with_overhang();
-		translate([0, 0, top_plate_z/2]) cube([top_plate_x-40, top_plate_y-40, top_plate_z], center=true);
-	}
-}
-
-bottom_panel_solo();

src/components.scad

@@ -1,89 +1,8 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
-include <roundedcube.scad>
-
-/* QUASI-CONSTANTS */
-
-// adjustments
-hole_tolerance = 0.15;
-
-// M2
-m2_screw_selftap_radius = 0.95;
-
-// M3
-m3_screw_selftap_radius = 1.3;
-
-// M4
-m4_bolt_radius = 2 + hole_tolerance;
-m4_bolt_countersink_radius = 6.1 + hole_tolerance;
-m4_bolt_hex_exterior_radius = 3.6 + hole_tolerance;
-
-// 24mm button
-small_button_radius = 12 + hole_tolerance;
-
-// 30mm button
-big_button_radius = 15 + hole_tolerance;
-
-// JLF mount dimensions
-lever_mount_x = 53;
-lever_mount_y = 95;
-lever_mount_z = 2;
-
-// case dimensions
-// base frame box. reminder: top of inside (including mounts) is chopped by top_plate_z for plates
-frame_x = 233;
-frame_y = 208;
-frame_z = 50;
-
-// depth of the "lip" of the frame that the top plate sets into/supports the overhang
-frame_wall = 8;
-
-// per neutrik (mm)
-neutrik_panel_thickness = 3;
-
-// top plate, which can either be the whole plate ("inset") or the mounting frame for a plate that overhangs
-top_plate_x = frame_x - frame_wall;
-top_plate_y = frame_y - frame_wall;
-top_plate_z = 5;
-
-// how much the top plate x/y is expanded to overhang the frame
-// note that this is relative to the top plate (so the wall is added back)
-top_plate_overhang_amount = frame_wall + 17;
-overhang_top_plate_x = top_plate_x + top_plate_overhang_amount;
-overhang_top_plate_y = top_plate_y + top_plate_overhang_amount;
-
-plate_to_frame_point_x = (top_plate_x/2)-10;
-plate_to_frame_point_y = (top_plate_y/2)-10;
-
-// frame interior that supports the top plates
-panel_support_width = 5;
-
-// neutrik D screw holes
-neutrik_d_screw_radius = 1.6 + hole_tolerance;
-neutrik_d_radius = 12 + hole_tolerance;
-
-// additional button radius for decorative panels, etc.
-decorative_radius_scale = 1.75;
-jumbo_decorative_radius_scale = 2;
-
-/* PARTS */
-
 module m4_hole() {
 	cylinder(r=m4_bolt_radius, h=100, $fn=50, center=true);
 }
@@ -92,17 +11,17 @@ module m4_hole_countersink() {
 	cylinder(r1=m4_bolt_radius, r2=m4_bolt_countersink_radius, h=3.2, $fn=50, center=true);
 }
 
-module top_plate_holes() {
+module panel_holes() {
 	// holes for mount bolts
-	translate([plate_to_frame_point_x, plate_to_frame_point_y, 0]) m4_hole();
-	translate([plate_to_frame_point_x, -plate_to_frame_point_y, 0]) m4_hole();
-	translate([-plate_to_frame_point_x, plate_to_frame_point_y, 0]) m4_hole();
-	translate([-plate_to_frame_point_x, -plate_to_frame_point_y, 0]) m4_hole();
+	translate([panel_to_frame_point_x, panel_to_frame_point_y, 0]) m4_hole();
+	translate([panel_to_frame_point_x, -panel_to_frame_point_y, 0]) m4_hole();
+	translate([-panel_to_frame_point_x, panel_to_frame_point_y, 0]) m4_hole();
+	translate([-panel_to_frame_point_x, -panel_to_frame_point_y, 0]) m4_hole();
 	// holes for mount bolt countersinks
-	translate([plate_to_frame_point_x, plate_to_frame_point_y, 2]) m4_hole_countersink();
-	translate([plate_to_frame_point_x, -plate_to_frame_point_y, 2]) m4_hole_countersink();
-	translate([-plate_to_frame_point_x, plate_to_frame_point_y, 2]) m4_hole_countersink();
-	translate([-plate_to_frame_point_x, -plate_to_frame_point_y, 2]) m4_hole_countersink();
+	translate([panel_to_frame_point_x, panel_to_frame_point_y, 2]) m4_hole_countersink();
+	translate([panel_to_frame_point_x, -panel_to_frame_point_y, 2]) m4_hole_countersink();
+	translate([-panel_to_frame_point_x, panel_to_frame_point_y, 2]) m4_hole_countersink();
+	translate([-panel_to_frame_point_x, -panel_to_frame_point_y, 2]) m4_hole_countersink();
 }
 
 // button hole, with extra wide bits for various uses (cutting out space
@@ -110,9 +29,9 @@ module top_plate_holes() {
 module button_24mm_hole() {
 	cylinder(r=small_button_radius, h=100, $fn=50, center=true);
 	// carve out space for snap-ins, leave 3mm
-	// slagcoin has screw-in nut diameter at 29.5mm, so radius+6 to leave some space
+	// slagcoin has screw-in nut diameter at 29.5mm, so radius+3 to leave some space
 	// translation is to leave 3mm thickness in the plate without recentering anything
-	translate([0, 0, -25]) cylinder(r=small_button_radius+6, h=49, $fn=50, center=true);
+	translate([0, 0, -25]) cylinder(r=small_button_radius+3, h=49, $fn=50, center=true);
 	// space for decorative button surround stuff
 	translate([0, 0, 50]) cylinder(r=small_button_radius*decorative_radius_scale, h=20, $fn=50, center=true);
 	translate([0, 0, 70]) cylinder(r=small_button_radius*jumbo_decorative_radius_scale, h=20, $fn=50, center=true);
@@ -136,7 +55,7 @@ module frame_hex_bolt_hole() {
 }
 
 module frame_interchange_hole() {
-	cylinder(r=15, h=50, $fn=50, center=true);
+	cylinder(r=18, h=50, $fn=4, center=true);
 }
 
 module neutrik_d_hole() {
@@ -153,9 +72,23 @@ module neutrik_d_mount() {
 	translate([-9.5, -12, 0]) neutrik_d_screw_hole();
 }
 
-// space for a neutrik D mount or 24mm button
+module rocker_20mm_mount() {
+	cylinder(r=10+hole_tolerance, h=5, $fn=50, center=true);
+	cube([2.2, 22, 5], center=true);
+	translate([9.5, 12, 0]) neutrik_d_screw_hole();
+	translate([-9.5, -12, 0]) neutrik_d_screw_hole();
+}
+
+// space for a neutrik D mount or 24mm button - Z is to cut the whole inside without affecting panel lip
 module frame_cutout() {
-	cube([36.5, 8, 40], center=true);
+	cube([30.5, 8, frame_z-(panel_z*2)], center=true);
+}
+
+// bank of three 24mm buttons, commonly on a frame face
+module aux_control_three_button_cluster() {
+	translate([-37, 0, 0]) button_24mm_hole();
+	translate([0, 0, 0]) button_24mm_hole();
+	translate([37, 0, 0]) button_24mm_hole();
 }
 
 module m2_mount_post() {
@@ -206,7 +139,7 @@ module levermountbase() {
 // should work with JLF, JLW, LS-32, LS-33, LS-40, LS-55, LS-56
 module levermountholes() {
 	// joystick hole
-	cylinder(r=12, h=5.1, $fn=50, center=true);
+	cylinder(r=lever_plate_hole, h=5.1, $fn=50, center=true);
 	// holes for joystick bolts
 	translate([20, 42.5, 0])
 		m4_hole();
@@ -216,6 +149,9 @@ module levermountholes() {
 		m4_hole();
 	translate([-20, -42.5, 0])
 		m4_hole();
+}
+
+module levermountcountersinks() {
 	// holes for joystick bolt countersinks
 	translate([20, 42.5, 2])
 		m4_hole_countersink();
@@ -227,62 +163,168 @@ module levermountholes() {
 		m4_hole_countersink();
 }
 
-module base_topplate() {
-	cube([top_plate_x, top_plate_y, top_plate_z], center=true);
+module base_panel() {
+	difference() {
+		union() {
+			cube([panel_x, panel_y, panel_z], center=true);
+			// add posts that sink into the frame, just to give
+			// a somewhat more sturdy/tight connection
+			translate([panel_to_frame_point_x, panel_to_frame_point_y, -panel_z])
+				scale([1.5, 1.5, 0.1]) frame_hex_bolt_hole();
+			translate([-panel_to_frame_point_x, panel_to_frame_point_y, -panel_z])
+				scale([1.5, 1.5, 0.1]) frame_hex_bolt_hole();
+			translate([panel_to_frame_point_x, -panel_to_frame_point_y, -panel_z])
+				scale([1.5, 1.5, 0.1]) frame_hex_bolt_hole();
+			translate([-panel_to_frame_point_x, -panel_to_frame_point_y, -panel_z])
+				scale([1.5, 1.5, 0.1]) frame_hex_bolt_hole();
+		}
+		// the posts mentioned above need space for the actual hex bolts
+		// used in connecting to the frame
+		translate([panel_to_frame_point_x, panel_to_frame_point_y, -panel_z])
+			scale([1, 1, 0.1]) frame_hex_bolt_hole();
+		translate([-panel_to_frame_point_x, panel_to_frame_point_y, -panel_z])
+			scale([1, 1, 0.1]) frame_hex_bolt_hole();
+		translate([panel_to_frame_point_x, -panel_to_frame_point_y, -panel_z])
+			scale([1, 1, 0.1]) frame_hex_bolt_hole();
+		translate([-panel_to_frame_point_x, -panel_to_frame_point_y, -panel_z])
+			scale([1, 1, 0.1]) frame_hex_bolt_hole();
+	}
+
+}
+
+module base_bottom_panel() {
+	mirror([0, 0, 1]) base_panel();
+}
+
+module panel() {
+	difference() {
+		base_panel();
+		panel_holes();
+	}
+}
+
+module bottom_panel() {
+	difference() {
+		base_bottom_panel();
+		mirror([0, 0, 1]) panel_holes();
+	}
 }
 
 module overhang_plate() {
-	roundedcube([overhang_top_plate_x, overhang_top_plate_y, top_plate_z], center=true, radius=1);
+	top_points = [
+		// top bevel
+		[(overhang_panel_x/2)-(overhang_panel_bevel_height*2),
+		 (overhang_panel_y/2)-(overhang_panel_bevel_height*2),
+		 panel_z/2-overhang_panel_bevel_height/2],
+		[-(overhang_panel_x/2)+(overhang_panel_bevel_height*2),
+		 (overhang_panel_y/2)-(overhang_panel_bevel_height*2),
+		 panel_z/2-overhang_panel_bevel_height/2],
+		[(overhang_panel_x/2)-(overhang_panel_bevel_height*2),
+		 -(overhang_panel_y/2)+(overhang_panel_bevel_height*2),
+		 panel_z/2-overhang_panel_bevel_height/2],
+		[-(overhang_panel_x/2)+(overhang_panel_bevel_height*2),
+		 -(overhang_panel_y/2)+(overhang_panel_bevel_height*2),
+		 panel_z/2-overhang_panel_bevel_height/2],
+	];
+	hull() {
+		for (p = top_points) {
+			translate(p) cylinder(r=overhang_panel_bevel_height, h=overhang_panel_bevel_height, center=true);
+		}
+		translate([0, 0, -overhang_panel_bevel_height])
+			cube([overhang_panel_x, overhang_panel_y, panel_z-overhang_panel_bevel_height*2], center=true);
+	}
 }
 
-// this takes the base_topplate and makes it a small frame, putting a larger top plate
-module base_top_plate_with_raised_overhang() {
+// this takes the base_panel and makes it a small frame, putting a larger top plate
+module base_panel_with_raised_overhang() {
 	// make a frame out of the top plate (and keep the main plate on the center plane)
 	translate([0, 0, -5]) difference() {
-		base_topplate();
-		cube([top_plate_x-(panel_support_width*2), top_plate_y-(panel_support_width*2), top_plate_z*2], center=true);
+		base_panel();
+		cube([panel_x-(panel_support_width*2), panel_y-(panel_support_width*2), panel_z], center=true);
 	}
-	translate([plate_to_frame_point_x, plate_to_frame_point_y, -2.5]) resize([0, 0, 10]) frame_mount_column();
-	translate([-(plate_to_frame_point_x), plate_to_frame_point_y, -2.5]) resize([0, 0, 10]) frame_mount_column();
-	translate([plate_to_frame_point_x, -(plate_to_frame_point_y), -2.5]) resize([0, 0, 10]) frame_mount_column();
-	translate([-(plate_to_frame_point_x), -(plate_to_frame_point_y), -2.5]) resize([0, 0, 10]) frame_mount_column();
+	translate([panel_to_frame_point_x, panel_to_frame_point_y, -2.5]) resize([0, 0, 10])
+		frame_mount_column();
+	translate([-(panel_to_frame_point_x), panel_to_frame_point_y, -2.5]) resize([0, 0, 10])
+		rotate([0, 0, 90]) frame_mount_column();
+	translate([panel_to_frame_point_x, -(panel_to_frame_point_y), -2.5]) resize([0, 0, 10])
+		rotate([0, 0, 270]) frame_mount_column();
+	translate([-(panel_to_frame_point_x), -(panel_to_frame_point_y), -2.5]) resize([0, 0, 10])
+		rotate([0, 0, 180]) frame_mount_column();
 	overhang_plate();
 }
 
-module topplate() {
+module panel_with_raised_overhang() {
 	difference() {
-		base_topplate();
-		top_plate_holes();
-	}
-}
-
-module bottom_plate_with_overhang() {
-	difference() {
-		rotate([180, 0, 0]) base_top_plate_with_raised_overhang();
-		rotate([180, 0, 0]) top_plate_holes();
-	}
-}
-
-module top_plate_with_raised_overhang() {
-	difference() {
-		base_top_plate_with_raised_overhang();
-		top_plate_holes();
+		base_panel_with_raised_overhang();
+		panel_holes();
 	}
 }
 
 module frame_box() {
 	difference() {
-		roundedcube([frame_x, frame_y, frame_z], center=true, radius=3);
-		cube([top_plate_x-(panel_support_width*2), top_plate_y-(panel_support_width*2), frame_z+5], center=true);
+		top_points = [
+			// top bevel
+			[(frame_x/2)-(frame_bevel_height*2),
+			 (frame_y/2)-(frame_bevel_height*2),
+			 frame_z/2-frame_bevel_height/2],
+			[-(frame_x/2)+(frame_bevel_height*2),
+			 (frame_y/2)-(frame_bevel_height*2),
+			 frame_z/2-frame_bevel_height/2],
+			[(frame_x/2)-(frame_bevel_height*2),
+			 -(frame_y/2)+(frame_bevel_height*2),
+			 frame_z/2-frame_bevel_height/2],
+			[-(frame_x/2)+(frame_bevel_height*2),
+			 -(frame_y/2)+(frame_bevel_height*2),
+			 frame_z/2-frame_bevel_height/2],
+		];
+		base_points = [
+			// majority of shape
+			[(frame_x/2)-frame_bevel_height, (frame_y/2)-frame_bevel_height, 0],
+			[-(frame_x/2)+frame_bevel_height, (frame_y/2)-frame_bevel_height, 0],
+			[(frame_x/2)-frame_bevel_height, -(frame_y/2)+frame_bevel_height, 0],
+			[-(frame_x/2)+frame_bevel_height, -(frame_y/2)+frame_bevel_height, 0],
+		];
+		bottom_points = [
+			// bottom bevel
+			[(frame_x/2)-(frame_bevel_height*2),
+			 (frame_y/2)-(frame_bevel_height*2),
+			 -frame_z/2+frame_bevel_height/2],
+			[-(frame_x/2)+(frame_bevel_height*2),
+			 (frame_y/2)-(frame_bevel_height*2),
+			 -frame_z/2+frame_bevel_height/2],
+			[(frame_x/2)-(frame_bevel_height*2),
+			 -(frame_y/2)+(frame_bevel_height*2),
+			 -frame_z/2+frame_bevel_height/2],
+			[-(frame_x/2)+(frame_bevel_height*2),
+			 -(frame_y/2)+(frame_bevel_height*2),
+			 -frame_z/2+frame_bevel_height/2],
+		];
+		hull() {
+			for (p = top_points) {
+				translate(p) cylinder(r=2, h=frame_bevel_height, center=true);
+			}
+			for (p = base_points) {
+				translate(p) cylinder(r=2, h=frame_z-(frame_bevel_height*2), center=true);
+			}
+			for (p = bottom_points) {
+				translate(p) cylinder(r=2, h=frame_bevel_height, center=true);
+			}
+		}
+		// cut out the middle to make it a box
+		cube([panel_x-(panel_support_width*2), panel_y-(panel_support_width*2), frame_z+5], center=true);
 	}
 }
 
 module frame_mount_column() {
-	cube([20, 20, frame_z], center=true);
+	cube([frame_mount_column_width, frame_mount_column_width, frame_z], center=true);
+	// add some corners back to do a lame chamfer
+	linear_extrude(height=frame_z, center=true)
+		polygon([[10, 10], [-20, 10], [10, -20]]);
 }
 
 module side_chopper() {
-	translate([frame_x/2+4, 0, 0]) cube([16, 2*(frame_y+top_plate_y), 2*(frame_z+top_plate_z)], center=true);
+	translate([(frame_x-frame_wall)/2+panel_overhang_amount, 0, 0])
+		cube([frame_wall+panel_overhang_amount*2, overhang_panel_y, frame_z], center=true);
 }
 
 module frame_connection_holes() {
@@ -303,21 +345,31 @@ module frame_cable_routing_hole() {
 
 module base_frame() {
 	frame_box();
-	translate([plate_to_frame_point_x, plate_to_frame_point_y, 0]) frame_mount_column();
-	translate([-plate_to_frame_point_x, plate_to_frame_point_y, 0]) frame_mount_column();
-	translate([plate_to_frame_point_x, -(plate_to_frame_point_y), 0]) frame_mount_column();
-	translate([-plate_to_frame_point_x, -(plate_to_frame_point_y), 0]) frame_mount_column();
+	translate([panel_to_frame_point_x, panel_to_frame_point_y, 0]) frame_mount_column();
+	translate([-panel_to_frame_point_x, panel_to_frame_point_y, 0]) rotate([0, 0, 90]) frame_mount_column();
+	translate([-panel_to_frame_point_x, -(panel_to_frame_point_y), 0]) rotate([0, 0, 180])  frame_mount_column();
+	translate([panel_to_frame_point_x, -(panel_to_frame_point_y), 0]) rotate([0, 0, 270])  frame_mount_column();
 }
 
 module frame() {
 	difference() {
 		base_frame();
-		translate([0, 0, frame_z/2]) scale([1, 1, 2]) base_topplate();
-		translate([0, 0, -frame_z/2]) scale([1, 1, 2]) base_topplate();
-		translate([plate_to_frame_point_x, plate_to_frame_point_y, 0]) frame_hex_bolt_hole();
-		translate([-plate_to_frame_point_x, plate_to_frame_point_y, 0]) frame_hex_bolt_hole();
-		translate([plate_to_frame_point_x, -plate_to_frame_point_y, 0]) frame_hex_bolt_hole();
-		translate([-plate_to_frame_point_x, -plate_to_frame_point_y, 0]) frame_hex_bolt_hole();
+		translate([0, 0, frame_z/2]) scale([1, 1, 2]) base_panel();
+		translate([0, 0, -frame_z/2]) scale([1, 1, 2]) bottom_panel();
+		translate([panel_to_frame_point_x, panel_to_frame_point_y, 0]) frame_hex_bolt_hole();
+		translate([-panel_to_frame_point_x, panel_to_frame_point_y, 0]) frame_hex_bolt_hole();
+		translate([panel_to_frame_point_x, -panel_to_frame_point_y, 0]) frame_hex_bolt_hole();
+		translate([-panel_to_frame_point_x, -panel_to_frame_point_y, 0]) frame_hex_bolt_hole();
+
+		// slightly larger holes than the posts in the base_panel
+		translate([panel_to_frame_point_x, panel_to_frame_point_y, frame_z/2-panel_z-5])
+			scale([1.55, 1.55, 0.2]) frame_hex_bolt_hole();
+		translate([-panel_to_frame_point_x, panel_to_frame_point_y, frame_z/2-panel_z-5])
+			scale([1.55, 1.55, 0.2]) frame_hex_bolt_hole();
+		translate([panel_to_frame_point_x, -panel_to_frame_point_y, frame_z/2-panel_z-5])
+			scale([1.55, 1.55, 0.2]) frame_hex_bolt_hole();
+		translate([-panel_to_frame_point_x, -panel_to_frame_point_y, frame_z/2-panel_z-5])
+			scale([1.55, 1.55, 0.2]) frame_hex_bolt_hole();
 	}
 }
 
@@ -364,18 +416,18 @@ module dir_arc_plus_w_24mm_8_button() {
 
 module dir_arc_30mm_thumb_button() {
 	// just my guesstimate on this one, but note that this is the same position as sega 2p (just mirrored)
-	translate([(top_plate_x/2)-28.06, (-top_plate_y/2)+62, 0]) button_30mm_hole();
+	translate([(panel_x/2)-28.06, (-panel_y/2)+62, 0]) button_30mm_hole();
 }
 
-module dir_arc_30mm() {
-	dir_arc_30mm_thumb_button();
+module dir_arc_30mm_finger_buttons() {
 	translate([0, 57.2, 0]) dir_arc_30mm_thumb_button();
 	translate([-33.8, 57.2+12.9, 0]) dir_arc_30mm_thumb_button();
 	translate([-33.8-34.8, 57.2+12.9, 0]) dir_arc_30mm_thumb_button();
 }
 
 module dir_arc_w_30mm() {
-	dir_arc_30mm();
+	dir_arc_30mm_thumb_button();
+	dir_arc_30mm_finger_buttons();
 	translate([-26.8, 57.2+12.9+34.5, 0]) dir_arc_30mm_thumb_button();
 }
 
@@ -387,7 +439,7 @@ module dir_arc_w_30mm_plus_one() {
 // Namco Noir (right hand)
 
 module noir_button_p1() {
-	translate([-top_plate_x/2, -top_plate_y/2, 0]) translate([35, 140, 0]) button_30mm_hole();
+	translate([-panel_x/2, -panel_y/2, 0]) translate([35, 140, 0]) button_30mm_hole();
 }
 
 module noir_plus_one() {
@@ -408,7 +460,7 @@ module noir_plus_one() {
 // Sega Astro City 2P (right hand)
 
 module sega_2p_p1() {
-	translate([-top_plate_x/2, -top_plate_y/2, 0]) translate([28.06, 140, 0]) button_30mm_hole();
+	translate([-panel_x/2, -panel_y/2, 0]) translate([28.06, 140, 0]) button_30mm_hole();
 }
 
 module sega_2p_6_button() {

src/frame-left.scad

@@ -1,21 +1,9 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
 module base_left_frame() {
@@ -36,16 +24,16 @@ module left_frame() {
 		frame_cable_routing_hole();
 
 		// aux button holes
-		translate([-30, 101.5, 0]) rotate([270, 0, 0]) button_24mm_hole();
-		translate([-30, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
-		translate([-70, 101.5, 0]) rotate([270, 0, 0]) button_24mm_hole();
-		translate([-70, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
-		translate([10, 101.5, 0]) rotate([270, 0, 0]) button_24mm_hole();
-		translate([10, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
+		translate([-35, 101.5, 0]) rotate([270, 0, 0]) aux_control_three_button_cluster();
+		translate([-35, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
+		translate([-72, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
+		translate([2, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
 
 		// neutrix button hole
-		translate([70, (frame_y/2)-neutrik_panel_thickness, 0]) rotate([90, 0, 0]) neutrik_d_mount();
-		translate([70, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
+		translate([frame_center_to_neutrik, (frame_y/2)-neutrik_panel_thickness, 0])
+			rotate([90, 0, 0]) neutrik_d_mount();
+		translate([frame_center_to_neutrik, (frame_y/2)-neutrik_panel_thickness-4, 0])
+			frame_cutout();
 	}
 }
 

src/frame-middle.scad

@@ -1,21 +1,9 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
 module base_middle_frame() {
@@ -39,11 +27,14 @@ module middle_frame() {
 		mirror([1, 0, 0]) frame_cable_routing_hole();
 
 		// neutrik mounts for connector, switches
-		translate([0, (frame_y/2)-neutrik_panel_thickness, 0]) rotate([90, 0, 0]) neutrik_d_mount();
+		translate([0, (frame_y/2)-neutrik_panel_thickness, 0])
+			rotate([90, 0, 0]) neutrik_d_mount();
 		translate([0, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
-		translate([-40, (frame_y/2)-neutrik_panel_thickness, 0]) rotate([90, 0, 0]) neutrik_d_mount();
+		translate([-40, (frame_y/2)-neutrik_panel_thickness, 0])
+			rotate([90, 0, 0]) neutrik_d_mount();
 		translate([-40, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
-		translate([40, (frame_y/2)-neutrik_panel_thickness, 0]) rotate([90, 0, 0]) neutrik_d_mount();
+		translate([40, (frame_y/2)-neutrik_panel_thickness, 0])
+			rotate([90, 0, 0]) neutrik_d_mount();
 		translate([40, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
 	}
 }

src/frame-piece-bottom-left-or-right-extended.scad

@@ -0,0 +1,29 @@
+/*
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <frame-piece-bottom-left-or-right.scad>
+
+module bottom_piece_wall() {
+	// get a slice of the piece, to use it in extruding
+	projection(cut=true) rotate([-90, 0, 0]) translate([0, frame_y/2-frame_bevel_height, 0])
+		bottom_left_or_right_frame_piece();
+}
+
+module bottom_piece_extension() {
+	// combine the original with a shrunken piece to "pull" the wall out
+	hull() {
+		linear_extrude(height=frame_extension_y) scale([1, 0.5, 1]) bottom_piece_wall();
+		linear_extrude(height=frame_bevel_height) bottom_piece_wall();
+	}
+}
+
+module extended_bottom_left_or_right_frame_piece() {
+	bottom_left_or_right_frame_piece();
+	translate([0, -frame_y/2+frame_bevel_height*2, 0]) rotate([90, 0, 0]) bottom_piece_extension();
+}
+
+extended_bottom_left_or_right_frame_piece();

src/frame-piece-bottom-left-or-right.scad

@@ -0,0 +1,26 @@
+/*
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <frame-left.scad>
+
+module bottom_left_or_right_frame_piece() {
+	piece_width = panel_support_width+frame_wall+frame_mount_column_width;
+	intersection() {
+		left_frame();
+		difference() {
+			// include the whole bottom wall (including mount columns)
+			translate([0, -(frame_y/2)+(piece_width/2), 0]) cube([frame_x, piece_width, frame_z], center=true);
+			// ...minus the frame wall and lip on the left
+			translate([-frame_x/2+frame_wall/2, 0, 0])
+				cube([frame_wall, frame_y, frame_z], center=true);
+			// ...minus a slot for the combining piece to go into
+			cube([frame_x, frame_y-(panel_support_width+frame_wall)*2, frame_z/4], center=true);
+		}
+	}
+}
+
+bottom_left_or_right_frame_piece();

src/frame-piece-interconnect.scad

@@ -0,0 +1,28 @@
+/*
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <frame-piece-side.scad>
+
+module interconnect_frame_half_piece() {
+	translate([frame_x/2-frame_wall, 0, 0]) difference() {
+		side_frame_piece();
+		rotate([0, 0, 180]) side_chopper();
+	}
+}
+
+module interconnect_frame_piece() {
+	difference() {
+		union() {
+			// slight translate is to make this a 2-manifold in OpenSCAD
+			translate([-0.01, 0, 0]) interconnect_frame_half_piece();
+			mirror([1, 0, 0]) interconnect_frame_half_piece();
+		}
+		translate([-frame_x/2, 0, 0]) frame_cable_routing_hole();
+	}
+}
+
+interconnect_frame_piece();

src/frame-piece-side-extended-to-bottom.scad

@@ -0,0 +1,35 @@
+/*
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <frame-piece-bottom-left-or-right-extended.scad>
+use <frame-piece-side.scad>
+
+module side_and_bottom_frame_piece_wall() {
+	// get a slice of the pieces, to use it in extruding
+	projection(cut=true) rotate([0, 90, 0]) translate([frame_x/2-frame_bevel_height, 0, 0])
+		side_frame_piece();
+	projection(cut=true) translate([0, -frame_y/2+frame_wall, 0]) rotate([90, 90, 0]) bottom_piece_extension();
+}
+
+module side_and_bottom_frame_piece_extension() {
+	// combine the original with a shrunken piece to "pull" the wall out
+	hull() {
+		linear_extrude(height=frame_extension_y) scale([0.5, 0.90, 1]) side_and_bottom_frame_piece_wall();
+		linear_extrude(height=frame_bevel_height) side_and_bottom_frame_piece_wall();
+	}
+}
+
+module extra_extended_left_or_right_frame_piece() {
+	difference() {
+		side_frame_piece();
+		// chop off the old edge which is getting replaced with the extension
+		translate([-frame_x/2+frame_bevel_height/2, 0, 0]) cube([frame_bevel_height, frame_y, frame_z], center=true);
+	}
+	translate([-frame_x/2+frame_bevel_height*2, 0, 0]) rotate([0, -90, 0]) side_and_bottom_frame_piece_extension();
+}
+
+extra_extended_left_or_right_frame_piece();

src/frame-piece-side-extended.scad

@@ -0,0 +1,33 @@
+/*
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <frame-piece-side.scad>
+
+module side_frame_piece_wall() {
+	// get a slice of the piece, to use it in extruding
+	projection(cut=true) rotate([0, 90, 0]) translate([frame_x/2-frame_bevel_height, 0, 0])
+		side_frame_piece();
+}
+
+module side_frame_piece_extension() {
+	// combine the original with a shrunken piece to "pull" the wall out
+	hull() {
+		linear_extrude(height=frame_extension_y) scale([0.5, 0.85, 1]) side_frame_piece_wall();
+		linear_extrude(height=frame_bevel_height) side_frame_piece_wall();
+	}
+}
+
+module extended_bottom_left_or_right_frame_piece() {
+	difference() {
+		side_frame_piece();
+		// chop off the old edge which is getting replaced with the extension
+		translate([-frame_x/2+frame_bevel_height/2, 0, 0]) cube([frame_bevel_height, frame_y, frame_z], center=true);
+	}
+	translate([-frame_x/2+frame_bevel_height*2, 0, 0]) rotate([0, -90, 0]) side_frame_piece_extension();
+}
+
+extended_bottom_left_or_right_frame_piece();

src/frame-piece-side.scad

@@ -0,0 +1,24 @@
+/*
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <frame-piece-top-left.scad>
+use <frame-piece-bottom-left-or-right.scad>
+
+module side_frame_piece() {
+	piece_width = panel_support_width+frame_wall+frame_mount_column_width;
+	difference() {
+		// side piece is left/right agnostic
+		frame();
+		// minus the top and bottom
+		top_left_frame_piece();
+		bottom_left_or_right_frame_piece();
+		// and just chop out the rest of the frame
+		translate([piece_width, 0, 0]) cube([frame_x, frame_y+1, frame_z+1], center=true);
+	}
+}
+
+side_frame_piece();

src/frame-piece-top-left.scad

@@ -0,0 +1,26 @@
+/*
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <frame-left.scad>
+
+module top_left_frame_piece() {
+	piece_width = panel_support_width+frame_wall+frame_mount_column_width;
+	intersection() {
+		left_frame();
+		difference() {
+			// include the whole top wall (including mount columns)
+			translate([0, (frame_y/2)-(piece_width/2), 0]) cube([frame_x, piece_width, frame_z], center=true);
+			// ...minus the frame wall and lip on the left
+			translate([-frame_x/2+frame_wall/2, 0, 0])
+				cube([frame_wall, frame_y, frame_z], center=true);
+			// ...minus a slot for the combining piece to go into
+			cube([frame_x, frame_y-(panel_support_width+frame_wall)*2, frame_z/4], center=true);
+		}
+	}
+}
+
+top_left_frame_piece();

src/frame-piece-top-right.scad

@@ -0,0 +1,26 @@
+/*
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <frame-right.scad>
+
+module top_right_frame_piece() {
+	piece_width = panel_support_width+frame_wall+frame_mount_column_width;
+	intersection() {
+		right_frame();
+		difference() {
+			// include the whole top wall (including mount columns)
+			translate([0, (frame_y/2)-(piece_width/2), 0]) cube([frame_x, piece_width, frame_z], center=true);
+			// ...minus the frame wall and lip on the right
+			translate([frame_x/2-frame_wall/2, 0, 0])
+				cube([frame_wall, frame_y, frame_z], center=true);
+			// ...minus a slot for the combining piece to go into
+			cube([frame_x, frame_y-(panel_support_width+frame_wall)*2, frame_z/4], center=true);
+		}
+	}
+}
+
+top_right_frame_piece();

src/frame-right.scad

@@ -1,21 +1,9 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
 module base_right_frame() {
@@ -36,16 +24,16 @@ module right_frame() {
 		mirror([1, 0, 0]) frame_cable_routing_hole();
 
 		// aux button holes
-		translate([30, 101.5, 0]) rotate([270, 0, 0]) button_24mm_hole();
-		translate([30, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
-		translate([70, 101.5, 0]) rotate([270, 0, 0]) button_24mm_hole();
-		translate([70, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
-		translate([-10, 101.5, 0]) rotate([270, 0, 0]) button_24mm_hole();
-		translate([-10, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
+		translate([35, 101.5, 0]) rotate([270, 0, 0]) aux_control_three_button_cluster();
+		translate([35, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
+		translate([72, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
+		translate([-2, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
 
 		// neutrix button hole
-		translate([-70, (frame_y/2)-neutrik_panel_thickness, 0]) rotate([90, 0, 0]) neutrik_d_mount();
-		translate([-70, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
+		translate([-frame_center_to_neutrik, (frame_y/2)-neutrik_panel_thickness, 0])
+			rotate([90, 0, 0]) neutrik_d_mount();
+		translate([-frame_center_to_neutrik, (frame_y/2)-neutrik_panel_thickness-4, 0])
+			frame_cutout();
 	}
 }
 

src/frame-solo.scad

@@ -1,21 +1,9 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
 module solo_frame() {
@@ -31,24 +19,17 @@ module solo_frame() {
 		translate([40, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
 
 		// aux button holes
-		translate([-frame_x/2+2.5, 0, 0]) rotate([0, 0, 270])
-			translate([0, 0, 0]) rotate([90, 0, 0]) button_24mm_hole();
+		translate([-frame_x/2+2.5, 0, 0]) rotate([90, 0, 270])
+			aux_control_three_button_cluster();
 		translate([(frame_x/2)-neutrik_panel_thickness-4, 0, 0]) rotate([0, 0, 90]) frame_cutout();
-		translate([-frame_x/2+2.5, 0, 0]) rotate([0, 0, 270])
-			translate([-40, 0, 0]) rotate([90, 0, 0]) button_24mm_hole();
-		translate([(frame_x/2)-neutrik_panel_thickness-4, -40, 0]) rotate([0, 0, 90]) frame_cutout();
-		translate([-frame_x/2+2.5, 0, 0]) rotate([0, 0, 270])
-			translate([40, 0, 0]) rotate([90, 0, 0]) button_24mm_hole();
-		translate([(frame_x/2)-neutrik_panel_thickness-4, 40, 0]) rotate([0, 0, 90]) frame_cutout();
-		translate([frame_x/2-2.5, 0, 0]) rotate([0, 0, 90])
-			translate([0, 0, 0]) rotate([90, 0, 0]) button_24mm_hole();
+		translate([(frame_x/2)-neutrik_panel_thickness-4, -37, 0]) rotate([0, 0, 90]) frame_cutout();
+		translate([(frame_x/2)-neutrik_panel_thickness-4, 37, 0]) rotate([0, 0, 90]) frame_cutout();
+
+		translate([frame_x/2+2.5, 0, 0]) rotate([90, 0, 270])
+			aux_control_three_button_cluster();
 		translate([-(frame_x/2)+neutrik_panel_thickness+4, 0, 0]) rotate([0, 0, 90]) frame_cutout();
-		translate([frame_x/2-2.5, 0, 0]) rotate([0, 0, 90])
-			translate([-40, 0, 0]) rotate([90, 0, 0]) button_24mm_hole();
-		translate([-(frame_x/2)+neutrik_panel_thickness+4, -40, 0]) rotate([0, 0, 90]) frame_cutout();
-		translate([frame_x/2-2.5, 0, 0]) rotate([0, 0, 90])
-			translate([40, 0, 0]) rotate([90, 0, 0]) button_24mm_hole();
-		translate([-(frame_x/2)+neutrik_panel_thickness+4, 40, 0]) rotate([0, 0, 90]) frame_cutout();
+		translate([-(frame_x/2)+neutrik_panel_thickness+4, -37, 0]) rotate([0, 0, 90]) frame_cutout();
+		translate([-(frame_x/2)+neutrik_panel_thickness+4, 37, 0]) rotate([0, 0, 90]) frame_cutout();
 	}
 }
 

src/misc-decorative-plate-24mm-button.scad

@@ -1,21 +1,9 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
 module button_24mm_decorative_plate() {

src/misc-decorative-plate-aux-connectors-neutrik-and-rocker-cluster.scad

@@ -0,0 +1,21 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <misc-neutrik-d-plate.scad>
+
+module aux_connectors_two_neutrik_cluster_decorative_plate() {
+	difference() {
+		hull() {
+			translate([-50, 0, 0]) neutrik_d_plate();
+			translate([50, 0, 0]) neutrik_d_plate();
+		}
+		translate([(frame_x/2)-frame_center_to_neutrik-frame_wall, 0, 0]) rocker_20mm_mount();
+		translate([-((frame_x/2)-frame_center_to_neutrik-frame_wall), 0, 0]) neutrik_d_mount();
+	}
+}
+
+aux_connectors_two_neutrik_cluster_decorative_plate();

src/misc-decorative-plate-aux-control-three-button-cluster.scad

@@ -0,0 +1,20 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <misc-neutrik-d-plate.scad>
+
+module aux_control_three_button_cluster_decorative_plate() {
+	difference() {
+		hull() {
+			translate([-44, 0, 0]) neutrik_d_plate();
+			translate([44, 0, 0]) neutrik_d_plate();
+		}
+		translate([0, 0, -10]) aux_control_three_button_cluster();
+	}
+}
+
+aux_control_three_button_cluster_decorative_plate();

src/misc-decorative-plate-dir_arc-plus-w-24mm-8-button.scad

@@ -1,21 +1,9 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
 module dir_arc_plus_w_24mm_8_button_decorative_plate() {

src/misc-decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one-plates.scad

@@ -0,0 +1,50 @@
+/*
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+decorative_radius_scale = 1.5;
+jumbo_decorative_radius_scale = 0;
+include <components.scad>
+
+module dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate_of_plates() {
+	difference() {
+		// get a 2mm slice of the bigger button cylinders
+		union() {
+			translate([-panel_x/2, 0, -25]) {
+				hull() union() {
+					dir_arc_30mm_finger_buttons();
+					translate([-26.8, 57.2+12.9+34.5, 0]) dir_arc_30mm_thumb_button();
+				}
+			}
+			translate([panel_x/2, 0, -25]) {
+				hull() sega_2p();
+			}
+			hull() {
+				translate([-panel_x/2, 0, -25]) dir_arc_30mm_thumb_button();
+				translate([panel_x/2, -19-9-11-19-9-11, -25]) sega_2p_p1();
+			}
+			difference() {
+				translate([-60, -8, 0]) cube(60, center=true);
+				translate([-98.35, -39.25, 0]) cylinder(h=50, r=48, $fn=50, center=true);
+			}
+			difference() {
+				translate([43.35, -10.30, 0]) cube(50, center=true);
+				translate([68.35, -35.30, 0]) cylinder(h=50, r=18, $fn=50, center=true);
+			}
+			difference() {
+				translate([-10, 55, 0]) cube(43, center=true);
+				translate([-5.15, 76.25, 0]) cylinder(h=50, r=27, $fn=50, center=true);
+			}
+			translate([-7, 0, 0]) cube(80, center=true);
+		}
+		translate([0, 0, -100]) cube([500, 500, 198], center=true);
+		translate([0, 0, 100]) cube([500, 500, 198], center=true);
+		// cut out the normal holes
+		translate([-panel_x/2, 0, -1]) dir_arc_w_30mm();
+		translate([panel_x/2, 0, -1]) sega_2p_plus_one();
+	}
+}
+
+dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate_of_plates();

src/misc-decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one.scad

@@ -1,35 +1,23 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
 module dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate() {
 	difference() {
 		// get a 2mm slice of the bigger button cylinders
 		union() {
-			translate([-top_plate_x/2, 0, -65]) dir_arc_w_30mm();
-			translate([top_plate_x/2, 0, -65]) sega_2p_plus_one();
+			translate([-panel_x/2, 0, -65]) dir_arc_w_30mm();
+			translate([panel_x/2, 0, -65]) sega_2p_plus_one();
 		}
 		translate([0, 0, -100]) cube([500, 500, 198], center=true);
 		translate([0, 0, 100]) cube([500, 500, 198], center=true);
 		// cut out the normal holes
-		translate([-top_plate_x/2, 0, -1]) dir_arc_w_30mm();
-		translate([top_plate_x/2, 0, -1]) sega_2p_plus_one();
+		translate([-panel_x/2, 0, -1]) dir_arc_w_30mm();
+		translate([panel_x/2, 0, -1]) sega_2p_plus_one();
 	}
 }
 

src/misc-decorative-plate-dir_arc-plus-w-30mm.scad

@@ -1,21 +1,9 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
 module dir_arc_plus_w_30mm_decorative_plate() {

src/misc-decorative-plate-sega-2p-6-button.scad

@@ -1,21 +1,9 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
 module sega_2p_6_button_decorative_plate() {

src/misc-decorative-plate-sega-2p-plus-one.scad

@@ -1,21 +1,9 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
 module sega_2p_plus_one_decorative_plate() {

src/misc-dustwasher-jlf.scad

@@ -1,26 +1,14 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
 module jlf_dustwasher() {
 	difference() {
-		cylinder(r=jumbo_decorative_radius+5+hole_tolerance, h=2, $fn=50, center=true);
+		cylinder(r=lever_plate_hole*decorative_radius_scale, h=2, $fn=50, center=true);
 		// 5.25 = 4.55 (diameter of shaft is 9.10mm) + .25 to let it take an angle
 		cylinder(r=4.8, h=2.1, $fn=50, center=true);
 	}

src/misc-dustwasher-lsx-nobi.scad

@@ -1,26 +1,14 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
 module lsx_nobi_dustwasher() {
 	difference() {
-		cylinder(r=jumbo_decorative_radius+5+hole_tolerance, h=2, $fn=50, center=true);
+		cylinder(r=lever_plate_hole*decorative_radius_scale, h=2, $fn=50, center=true);
 		// 5.25 = 5 (diameter of shaft is 10mm) + .25 to let it take an angle
 		cylinder(r=5.25+hole_tolerance, h=2.1, $fn=50, center=true);
 	}

src/misc-lever-mount-sanwa-seimitsu.scad

@@ -0,0 +1,16 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+
+module sanwa_seimitsu_lever_mount() {
+	difference() {
+		levermountbase();
+		levermountholes();
+	}
+}
+
+sanwa_seimitsu_lever_mount();

src/misc-neutrik-d-plate-20mm-hole.scad

@@ -1,30 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <components.scad>
-use <misc-neutrik-d-plate.scad>
-
-module neutrik_d_plate_20mm() {
-	difference() {
-		neutrik_d_plate();
-		cylinder(r=10+hole_tolerance, h=5, $fn=50, center=true);
-		cube([2.2, 22, 5], center=true);
-	}
-}
-
-neutrik_d_plate_20mm();

src/misc-neutrik-d-plate-24mm-hole.scad

@@ -1,28 +1,16 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 use <misc-neutrik-d-plate.scad>
 
 module neutrik_d_plate_24mm() {
 	difference() {
 		neutrik_d_plate();
-		cylinder(r=12+hole_tolerance, h=5, $fn=50, center=true);
+		neutrik_d_mount();
 	}
 }
 

src/misc-neutrik-d-plate.scad

@@ -1,21 +1,9 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
 module neutrik_d_plate() {

src/misc-rocker-20mm-plate.scad

@@ -0,0 +1,17 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <misc-neutrik-d-plate.scad>
+
+module rocker_plate_20mm() {
+	difference() {
+		neutrik_d_plate();
+		rocker_20mm_mount();
+	}
+}
+
+rocker_plate_20mm();

src/parameters.scad

@@ -0,0 +1,83 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+// adjustments
+hole_tolerance = 0.15;
+
+// M2
+m2_screw_selftap_radius = 0.95;
+
+// M3
+m3_screw_selftap_radius = 1.3;
+
+// M4
+m4_bolt_radius = 2 + hole_tolerance;
+m4_bolt_countersink_radius = 6.1 + hole_tolerance;
+m4_bolt_hex_exterior_radius = 3.6 + hole_tolerance;
+
+// 24mm button
+small_button_radius = 12 + hole_tolerance;
+
+// 30mm button
+big_button_radius = 15 + hole_tolerance;
+
+// JLF mount dimensions
+lever_mount_x = 53;
+lever_mount_y = 95;
+lever_mount_z = 2;
+
+// standard lever hole
+lever_plate_hole = 12;
+
+// case dimensions
+// base frame box. reminder: top of inside (including mounts) is chopped by panel_z for plates
+frame_x = 233;
+frame_y = 208;
+frame_z = 57;
+
+// degree to which the extended frame pieces stick out from the end of the frame
+frame_extension_x = 25;
+frame_extension_y = 25;
+
+// this sinks the bottom and top of the frame inward a bit, and is used to math out two shapes
+// when creating the frame box / overhang panel
+frame_bevel_height = 2;
+overhang_panel_bevel_height = 1;
+
+frame_center_to_neutrik = 70;
+
+// depth of the "lip" of the frame that the top plate sets into/supports the overhang
+frame_wall = 4;
+
+// width of the column in the frame corners to support the hex bolt
+frame_mount_column_width = 20;
+
+// per neutrik (mm)
+neutrik_panel_thickness = 3;
+
+// top plate, which can either be the whole plate ("inset") or the mounting frame for a plate that overhangs
+panel_x = frame_x - (frame_wall * 2);
+panel_y = frame_y - (frame_wall * 2);
+panel_z = 5;
+
+// how much the top plate x/y is expanded to overhang the frame
+// note that this is relative to the top plate (so the wall is added back)
+panel_overhang_amount = 8.5;
+overhang_panel_x = panel_x + (frame_wall * 2) + (panel_overhang_amount * 2);
+overhang_panel_y = panel_y + (frame_wall * 2) + (panel_overhang_amount * 2);
+
+panel_to_frame_point_x = (panel_x/2)-10;
+panel_to_frame_point_y = (panel_y/2)-10;
+
+// frame interior that supports the top plates
+panel_support_width = 5;
+
+// neutrik D screw holes
+neutrik_d_screw_radius = 1.6 + hole_tolerance;
+neutrik_d_radius = 12 + hole_tolerance;
+
+// additional button radius for decorative panels, etc.
+decorative_radius_scale = 1.75;
+jumbo_decorative_radius_scale = 2;

src/roundedcube.scad

@@ -1,55 +0,0 @@
-// More information: https://danielupshaw.com/openscad-rounded-corners/
-
-// Set to 0.01 for higher definition curves (renders slower)
-$fs = 0.15;
-
-module roundedcube(size = [1, 1, 1], center = false, radius = 0.5, apply_to = "all") {
-	// If single value, convert to [x, y, z] vector
-	size = (size[0] == undef) ? [size, size, size] : size;
-
-	translate_min = radius;
-	translate_xmax = size[0] - radius;
-	translate_ymax = size[1] - radius;
-	translate_zmax = size[2] - radius;
-
-	diameter = radius * 2;
-
-	obj_translate = (center == false) ?
-		[0, 0, 0] : [
-			-(size[0] / 2),
-			-(size[1] / 2),
-			-(size[2] / 2)
-		];
-
-	translate(v = obj_translate) {
-		hull() {
-			for (translate_x = [translate_min, translate_xmax]) {
-				x_at = (translate_x == translate_min) ? "min" : "max";
-				for (translate_y = [translate_min, translate_ymax]) {
-					y_at = (translate_y == translate_min) ? "min" : "max";
-					for (translate_z = [translate_min, translate_zmax]) {
-						z_at = (translate_z == translate_min) ? "min" : "max";
-
-						translate(v = [translate_x, translate_y, translate_z])
-						if (
-							(apply_to == "all") ||
-							(apply_to == "xmin" && x_at == "min") || (apply_to == "xmax" && x_at == "max") ||
-							(apply_to == "ymin" && y_at == "min") || (apply_to == "ymax" && y_at == "max") ||
-							(apply_to == "zmin" && z_at == "min") || (apply_to == "zmax" && z_at == "max")
-						) {
-							sphere(r = radius);
-						} else {
-							rotate = 
-								(apply_to == "xmin" || apply_to == "xmax" || apply_to == "x") ? [0, 90, 0] : (
-								(apply_to == "ymin" || apply_to == "ymax" || apply_to == "y") ? [90, 90, 0] :
-								[0, 0, 0]
-							);
-							rotate(a = rotate)
-							cylinder(h = diameter, r = radius, center = true);
-						}
-					}
-				}
-			}
-		}
-	}
-}

src/top-panel-inset-dir_arc-plus-w-30mm-plus-one-with-mount.scad

@@ -1,27 +1,15 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 use <top-panel-inset-dir_arc-plus-w-30mm-plus-one.scad>
 
 module dir_arc_w_30mm_plus_one_panel_with_mount() {
 	dir_arc_w_30mm_plus_one_panel();
-	translate([-15, -40, -(top_plate_z/2) - 3]) rotate([0, 0, -15]) pcb_mount();
+	translate([-15, -40, -(panel_z/2) - 3]) rotate([0, 0, -15]) pcb_mount();
 }
 
 dir_arc_w_30mm_plus_one_panel_with_mount();

src/top-panel-inset-dir_arc-plus-w-30mm-plus-one.scad

@@ -1,26 +1,14 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
 module dir_arc_w_30mm_plus_one_panel() {
 	difference() {
-		topplate();
+		panel();
 		dir_arc_w_30mm_plus_one();
 	}
 }

src/top-panel-inset-lever-and-dir_arc-plus-w-30mm.scad

@@ -1,31 +1,17 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
 module top_panel_inset_lever_and_dir_arc_w_30mm() {
 	difference() {
-		union() {
-			topplate();
-			translate([(-top_plate_x/2)+55, (top_plate_y/2)-75, -((top_plate_z/2)+(lever_mount_z/2))]) levermountbase();
-		}
+		panel();
 		dir_arc_w_30mm();
-		translate([(-top_plate_x/2)+55, (top_plate_y/2)-75, 0]) levermountholes();
+		translate([(-panel_x/2)+55, (panel_y/2)-75, 0]) levermountholes();
+		translate([(-panel_x/2)+55, (panel_y/2)-75, 0]) levermountcountersinks();
 	}
 }
 

src/top-panel-inset-lever-with-mount.scad

@@ -1,27 +1,15 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 use <top-panel-inset-lever.scad>
 
 module lever_panel_with_mount() {
 	lever_panel();
-	translate([0, -top_plate_y/2+25, -(top_plate_z/2) - 3]) pcb_mount();
+	translate([0, -panel_y/2+25, -(panel_z/2) - 3]) pcb_mount();
 }
 
 lever_panel_with_mount();

src/top-panel-inset-lever.scad

@@ -1,35 +1,19 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
 // combine the lever mount and generic plate, with mounting holes
 module lever_panel() {
 	difference() {
 		// base plate
-		union() {
-			translate([0,-20,0])
-				topplate();
-			translate([0, 0, -((top_plate_z/2)+(lever_mount_z/2))])
-				levermountbase();
-		}
+		translate([0,-20,0]) panel();
 		// holes to mount the lever
 		levermountholes();
+		levermountcountersinks();
 	}
 }
 

src/top-panel-inset-namco-noir-plus-one.scad

@@ -1,26 +1,14 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
 module namco_noir_plus_one_panel() {
 	difference() {
-		topplate();
+		panel();
 		noir_plus_one();
 	}
 }

src/top-panel-inset-namco-noir-plus-two.scad

@@ -1,26 +1,14 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
 module namco_noir_plus_two_panel() {
 	difference() {
-		topplate();
+		panel();
 		noir_plus_one();
 		translate([32.94-3.47-3.47, -78+7.37+4.49, 0]) noir_button_p1();
 	}

src/top-panel-inset-sega-2p-plus-one-plus-control-with-mount.scad

@@ -1,27 +1,15 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 use <top-panel-inset-sega-2p-plus-one-plus-control.scad>
 
 module top_panel_inset_sega_2p_plus_one_plus_control_with_mount() {
 	top_panel_inset_sega_2p_plus_one_plus_control();
-	translate([30, -50, -(top_plate_z/2) - 3]) pcb_mount();
+	translate([30, -50, -(panel_z/2) - 3]) pcb_mount();
 }
 
 top_panel_inset_sega_2p_plus_one_plus_control_with_mount();

src/top-panel-inset-sega-2p-plus-one-plus-control.scad

@@ -1,26 +1,14 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
 module top_panel_inset_sega_2p_plus_one_plus_control() {
 	difference() {
-		topplate();
+		panel();
 		sega_2p_plus_one();
 		rotate([0, 0, 180]) side_chopper();
 		translate([89, 30, 0]) button_24mm_hole();

src/top-panel-inset-sega-2p-plus-one.scad

@@ -1,26 +1,14 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
 module sega_2p_plus_one_panel() {
 	difference() {
-		topplate();
+		panel();
 		sega_2p_plus_one();
 	}
 }

src/top-panel-left-lever-and-dir_arc-plus-w-30mm.scad

@@ -1,33 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <components.scad>
-
-module top_panel_left_lever_and_dir_arc_w_30mm() {
-	difference() {
-		union() {
-			top_plate_with_raised_overhang();
-			translate([(-top_plate_x/2)+55, (top_plate_y/2)-75, -((top_plate_z/2)+(lever_mount_z/2))]) levermountbase();
-		}
-		dir_arc_w_30mm();
-		side_chopper();
-		translate([(-top_plate_x/2)+55, (top_plate_y/2)-75, 0]) levermountholes();
-	}
-}
-
-top_panel_left_lever_and_dir_arc_w_30mm();

src/top-panel-left-lever.scad

@@ -1,35 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <components.scad>
-
-// combine the lever mount and generic plate, with mounting holes
-module top_panel_left_lever() {
-	difference() {
-		// base plate
-		union() {
-			translate([0,-20,0]) top_plate_with_raised_overhang();
-			translate([0, 0, -((top_plate_z/2)+(lever_mount_z/2))]) levermountbase();
-		}
-		// holes to mount the lever
-		levermountholes();
-		side_chopper();
-	}
-}
-
-top_panel_left_lever();

src/top-panel-middle-dir_arc-plus-w-30mm-with-mount.scad

@@ -1,27 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <components.scad>
-use <top-panel-middle-dir_arc-plus-w-30mm.scad>
-
-module top_panel_middle_dir_arc_w_30mm_with_mount() {
-	top_panel_middle_dir_arc_w_30mm();
-	translate([-15, -40, -(top_plate_z/2) - 3]) rotate([0, 0, -45]) pcb_mount();
-}
-
-top_panel_middle_dir_arc_w_30mm_with_mount();

src/top-panel-middle-dir_arc-plus-w-30mm.scad

@@ -1,30 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <components.scad>
-
-module top_panel_middle_dir_arc_w_30mm() {
-	difference() {
-		top_plate_with_raised_overhang();
-		dir_arc_w_30mm();
-		rotate([0, 0, 180]) side_chopper();
-		side_chopper();
-	}
-}
-
-top_panel_middle_dir_arc_w_30mm();

src/top-panel-overhang-left-lever-and-dir_arc-plus-w-30mm.scad

@@ -0,0 +1,19 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+
+module top_panel_left_lever_and_dir_arc_w_30mm() {
+	difference() {
+		panel_with_raised_overhang();
+		dir_arc_w_30mm();
+		side_chopper();
+		translate([(-panel_x/2)+55, (panel_y/2)-75, 0]) levermountholes();
+		translate([(-panel_x/2)+55, (panel_y/2)-75, 0]) levermountcountersinks();
+	}
+}
+
+top_panel_left_lever_and_dir_arc_w_30mm();

src/top-panel-overhang-left-lever.scad

@@ -0,0 +1,21 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+
+// combine the lever mount and generic plate, with mounting holes
+module top_panel_left_lever() {
+	difference() {
+		// base plate
+		panel_with_raised_overhang();
+		// holes to mount the lever
+		translate([0, 20, 0]) levermountholes();
+		translate([0, 20, 0]) levermountcountersinks();
+		side_chopper();
+	}
+}
+
+top_panel_left_lever();

src/top-panel-overhang-middle-dir_arc-plus-w-30mm-with-mount.scad

@@ -0,0 +1,15 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <top-panel-overhang-middle-dir_arc-plus-w-30mm.scad>
+
+module top_panel_middle_dir_arc_w_30mm_with_mount() {
+	top_panel_middle_dir_arc_w_30mm();
+	translate([-15, -40, -(panel_z/2) - 3]) rotate([0, 0, -45]) pcb_mount();
+}
+
+top_panel_middle_dir_arc_w_30mm_with_mount();

src/top-panel-overhang-middle-dir_arc-plus-w-30mm.scad

@@ -0,0 +1,18 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+
+module top_panel_middle_dir_arc_w_30mm() {
+	difference() {
+		panel_with_raised_overhang();
+		dir_arc_w_30mm();
+		rotate([0, 0, 180]) side_chopper();
+		side_chopper();
+	}
+}
+
+top_panel_middle_dir_arc_w_30mm();

src/top-panel-overhang-right-sega-2p-plus-one-plus-control-with-mount-with-oled.scad

@@ -0,0 +1,18 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <top-panel-overhang-right-sega-2p-plus-one-plus-control-with-mount.scad>
+
+module top_panel_right_sega_2p_plus_one_plus_control_with_mount_with_oled() {
+	difference() {
+		top_panel_right_sega_2p_plus_one_plus_control_with_mount();
+		translate([75, 77.5, 0]) oled_ssd1306_mount_cutout();
+	}
+	translate([75, 77.5, 0.5]) oled_ssd1306_mount();
+}
+
+top_panel_right_sega_2p_plus_one_plus_control_with_mount_with_oled();

src/top-panel-overhang-right-sega-2p-plus-one-plus-control-with-mount.scad

@@ -0,0 +1,15 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <top-panel-overhang-right-sega-2p-plus-one-plus-control.scad>
+
+module top_panel_right_sega_2p_plus_one_plus_control_with_mount() {
+	top_panel_right_sega_2p_plus_one_plus_control();
+	translate([30, -50, -(panel_z/2) - 3]) pcb_mount();
+}
+
+top_panel_right_sega_2p_plus_one_plus_control_with_mount();

src/top-panel-overhang-right-sega-2p-plus-one-plus-control.scad

@@ -0,0 +1,18 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+
+module top_panel_right_sega_2p_plus_one_plus_control() {
+	difference() {
+		panel_with_raised_overhang();
+		sega_2p_plus_one();
+		rotate([0, 0, 180]) side_chopper();
+		translate([89, 30, 0]) button_24mm_hole();
+	}
+}
+
+top_panel_right_sega_2p_plus_one_plus_control();

src/top-panel-overhang-right-sega-2p-plus-one-with-mount.scad

@@ -0,0 +1,15 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <top-panel-overhang-right-sega-2p-plus-one.scad>
+
+module top_panel_right_sega_2p_plus_one_with_mount() {
+	top_panel_right_sega_2p_plus_one();
+	translate([30, -50, -(panel_z/2) - 3]) pcb_mount();
+}
+
+top_panel_right_sega_2p_plus_one_with_mount();

src/top-panel-overhang-right-sega-2p-plus-one.scad

@@ -0,0 +1,17 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+
+module top_panel_right_sega_2p_plus_one() {
+	difference() {
+		panel_with_raised_overhang();
+		sega_2p_plus_one();
+		rotate([0, 0, 180]) side_chopper();
+	}
+}
+
+top_panel_right_sega_2p_plus_one();

src/top-panel-overhang-solo-dir_arc-24mm-6-button.scad

@@ -0,0 +1,16 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+
+module dir_arc_24mm_6_button_panel() {
+	difference() {
+		panel_with_raised_overhang();
+		translate([-71.5, -panel_y/2+122.5, 0]) dir_arc_24mm_6_button();
+	}
+}
+
+dir_arc_24mm_6_button_panel();

src/top-panel-overhang-solo-dir_arc-plus-w-24mm-8-button.scad

@@ -0,0 +1,16 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+
+module dir_arc_plus_w_24mm_8_button_panel() {
+	difference() {
+		panel_with_raised_overhang();
+		translate([-80.5, panel_y/6, 0]) dir_arc_plus_w_24mm_8_button();
+	}
+}
+
+dir_arc_plus_w_24mm_8_button_panel();

src/top-panel-overhang-solo-lever-and-sega-2p-6-button.scad

@@ -0,0 +1,21 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+
+module top_panel_solo_lever_and_sega_2p_6_button() {
+	difference() {
+		// base plate
+		union() {
+			panel_with_raised_overhang();
+			translate([-60, 18, -((panel_z/2)+(lever_mount_z/2))]) levermountbase();
+		}
+		translate([95, -20, 0]) sega_2p_6_button();
+		translate([-60, 18, 0]) levermountholes();
+	}
+}
+
+top_panel_solo_lever_and_sega_2p_6_button();

src/top-panel-right-sega-2p-plus-one-plus-control-with-mount-with-oled.scad

@@ -1,30 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <components.scad>
-use <top-panel-right-sega-2p-plus-one-plus-control-with-mount.scad>
-
-module top_panel_right_sega_2p_plus_one_plus_control_with_mount_with_oled() {
-	difference() {
-		top_panel_right_sega_2p_plus_one_plus_control_with_mount();
-		translate([75, 77.5, 0]) oled_ssd1306_mount_cutout();
-	}
-	translate([75, 77.5, 0.5]) oled_ssd1306_mount();
-}
-
-top_panel_right_sega_2p_plus_one_plus_control_with_mount_with_oled();

src/top-panel-right-sega-2p-plus-one-plus-control-with-mount.scad

@@ -1,27 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <components.scad>
-use <top-panel-right-sega-2p-plus-one-plus-control.scad>
-
-module top_panel_right_sega_2p_plus_one_plus_control_with_mount() {
-	top_panel_right_sega_2p_plus_one_plus_control();
-	translate([30, -50, -(top_plate_z/2) - 3]) pcb_mount();
-}
-
-top_panel_right_sega_2p_plus_one_plus_control_with_mount();

src/top-panel-right-sega-2p-plus-one-plus-control.scad

@@ -1,30 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <components.scad>
-
-module top_panel_right_sega_2p_plus_one_plus_control() {
-	difference() {
-		top_plate_with_raised_overhang();
-		sega_2p_plus_one();
-		rotate([0, 0, 180]) side_chopper();
-		translate([89, 30, 0]) button_24mm_hole();
-	}
-}
-
-top_panel_right_sega_2p_plus_one_plus_control();

src/top-panel-right-sega-2p-plus-one-with-mount.scad

@@ -1,27 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <components.scad>
-use <top-panel-right-sega-2p-plus-one.scad>
-
-module top_panel_right_sega_2p_plus_one_with_mount() {
-	top_panel_right_sega_2p_plus_one();
-	translate([30, -50, -(top_plate_z/2) - 3]) pcb_mount();
-}
-
-top_panel_right_sega_2p_plus_one_with_mount();

src/top-panel-right-sega-2p-plus-one.scad

@@ -1,29 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <components.scad>
-
-module top_panel_right_sega_2p_plus_one() {
-	difference() {
-		top_plate_with_raised_overhang();
-		sega_2p_plus_one();
-		rotate([0, 0, 180]) side_chopper();
-	}
-}
-
-top_panel_right_sega_2p_plus_one();

src/top-panel-solo-dir_arc-24mm-6-button.scad

@@ -1,28 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <components.scad>
-
-module dir_arc_24mm_6_button_panel() {
-	difference() {
-		top_plate_with_raised_overhang();
-		translate([-71.5, -top_plate_y/2+122.5, 0]) dir_arc_24mm_6_button();
-	}
-}
-
-dir_arc_24mm_6_button_panel();

src/top-panel-solo-dir_arc-plus-w-24mm-8-button.scad

@@ -1,28 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <components.scad>
-
-module dir_arc_plus_w_24mm_8_button_panel() {
-	difference() {
-		top_plate_with_raised_overhang();
-		translate([-80.5, top_plate_y/6, 0]) dir_arc_plus_w_24mm_8_button();
-	}
-}
-
-dir_arc_plus_w_24mm_8_button_panel();

src/top-panel-solo-lever-and-sega-2p-6-button.scad

@@ -1,33 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <components.scad>
-
-module top_panel_solo_lever_and_sega_2p_6_button() {
-	difference() {
-		// base plate
-		union() {
-			top_plate_with_raised_overhang();
-			translate([-60, 18, -((top_plate_z/2)+(lever_mount_z/2))]) levermountbase();
-		}
-		translate([95, -20, 0]) sega_2p_6_button();
-		translate([-60, 18, 0]) levermountholes();
-	}
-}
-
-top_panel_solo_lever_and_sega_2p_6_button();