Brian S. Stephan
2253889430
remove unnecessary difference/union duplication
2023-09-15 15:01:39 -05:00
Brian S. Stephan
a26f87a9d2
fit an arcade layout in one panel
2023-09-13 21:17:45 -05:00
Brian S. Stephan
962402c291
new top panels for my current two-frame experiment
...
seems good so far
2023-09-13 20:46:00 -05:00
Brian S. Stephan
63c7113d9f
more notes for next time
2023-09-12 23:52:32 -05:00
Brian S. Stephan
163dfc2c63
commit my new target assembly
2023-09-12 23:51:37 -05:00
Brian S. Stephan
aa633584e5
don't mirror, mostly duplicate the left frame components into right frame
...
doing a naive mirror meant the neutrik D mount holes were in the wrong
spot. fine for a 20mm + plate mount, but not good for any actual
component
2023-09-12 23:40:51 -05:00
Brian S. Stephan
767b38acef
more TODO notes
2023-09-12 23:40:48 -05:00
Brian S. Stephan
56367369b7
more panel estimates
2023-09-12 20:19:43 -05:00
Brian S. Stephan
fa304606df
generalize the top panel cost, they should all come in around this
2023-09-12 17:09:30 -05:00
Brian S. Stephan
5d5eb34f8a
top panel cost for something like the lever + dir_arc panel
2023-09-12 13:03:35 -05:00
Brian S. Stephan
17ab4815a6
more cost estimate documentation
2023-09-12 10:36:15 -05:00
Brian S. Stephan
afd548f8d9
correct hardware notes, since v2 the M4 standoffs are 45mm
2023-09-12 10:14:45 -05:00
Brian S. Stephan
e2549694ea
start estimating cost of build
2023-09-12 09:24:33 -05:00
Brian S. Stephan
2aab029905
use the same frame cutout for neutrik D and 24mm holes
2023-09-11 20:34:09 -05:00
Brian S. Stephan
0f11aacec4
un-rotate the solo frame now that X is longer
2023-09-11 20:28:33 -05:00
Brian S. Stephan
3f0712af70
try making the frame wider than it is deep
...
the goal is to try to fit a hitstick-w into two frames
2023-09-11 13:29:40 -05:00
Brian S. Stephan
51ba220a5a
refer to proper parent filename
2023-09-11 12:01:27 -05:00
Brian S. Stephan
47d9a523c3
remove double translation of dir_arc-30mm layouts
2023-09-11 11:43:25 -05:00
Brian S. Stephan
3e74f3d915
refer to proper parent filename
2023-09-11 11:28:18 -05:00
Brian S. Stephan
cfb48574b2
change 30mm dir_arc layouts to be based on the thumb position
...
this will hopefully make some moving of stuff around a bit easier
2023-09-11 11:25:59 -05:00
Brian S. Stephan
36a96fbe26
tighten up the inner hole a bit, to no noticeable detriment
2023-09-11 10:37:46 -05:00
Brian S. Stephan
86ba641ba6
modularize the directional arc part of the 24mm all buttons layout
...
this was for a failed experiment, but it's probably good to do this
regardless
2023-09-11 10:37:43 -05:00
Brian S. Stephan
3d24dad1ae
spread out the frame connection holes a bit
2023-09-11 09:56:52 -05:00
Brian S. Stephan
fe961e8a7e
make neutrik D cutout bigger, simplifies that frame wall
2023-09-11 09:45:09 -05:00
Brian S. Stephan
28c0c0e475
properly and relatively position neutrik cutouts
2023-09-11 09:33:39 -05:00
Brian S. Stephan
2960151d98
remove more magic numbers, overhang relative to base frame stuff
2023-09-08 14:08:40 -05:00
Brian S. Stephan
82d1913551
remove more magic numbers, top plate is a derivative of base frame dimensions
2023-09-08 13:53:51 -05:00
Brian S. Stephan
88fc53988e
remove some magic numbers that are derived from base dimensions
2023-09-08 13:44:05 -05:00
Brian S. Stephan
f73c94be2f
move the rotated top plate into something reusable
2023-09-08 13:17:04 -05:00
Brian S. Stephan
cd21b4dd0a
remove unused import
2023-09-08 13:14:53 -05:00
Brian S. Stephan
7a71c8cd81
simple naming consistency change
...
sed -i 's/topplate_with_raised/top_plate_with_raised/' **/*.scad
2023-09-08 12:22:53 -05:00
Brian S. Stephan
350fc27285
break up the sega 2P layout into parts
...
messing with something that may never see the light of day, but no harm
in doing this
2023-09-08 12:15:46 -05:00
Brian S. Stephan
3b3b857568
build improvements, create zip file
2023-09-07 19:53:56 -05:00
Brian S. Stephan
fddb5d450e
commit my scratch file since it's a good demo
2023-09-07 19:17:48 -05:00
Brian S. Stephan
0329dd2b3c
make dustwasher hole a bit bigger to let the lever move
2023-09-07 19:12:20 -05:00
Brian S. Stephan
ee3dd23b36
another idea for next time
2023-09-07 11:02:00 -05:00
Brian S. Stephan
0e00f8d5d1
with the frame redesign, we can use 16mm M4s
2023-09-07 00:19:42 -05:00
Brian S. Stephan
b911a1b7c1
three section v2 render
2023-09-06 16:24:58 -05:00
Brian S. Stephan
ff19699d61
update TODO and README notes
...
no known issues!
2023-09-06 14:47:14 -05:00
Brian S. Stephan
8140d5e3a8
neutrik D base plate, also good as a cover
2023-09-06 14:44:54 -05:00
Brian S. Stephan
708122e510
dustwasher that fits the LSX-NOBI, maybe more
2023-09-06 11:30:52 -05:00
Brian S. Stephan
b704f158db
start v3 TODO
2023-09-05 11:47:50 -05:00
Brian S. Stephan
5177090625
rename some misc files for consistency/sorting
2023-09-05 10:41:59 -05:00
Brian S. Stephan
679d3025fe
decorative plate for a neutrik D mount
...
this is used for the outside of an ethercon, for instance
2023-09-03 09:56:53 -05:00
Brian S. Stephan
e68ffbfc7b
decorative button surround plates for the top
2023-09-03 09:53:49 -05:00
Brian S. Stephan
ed3c5a1210
rename non-overhang panels accordingly
2023-09-01 15:54:55 -05:00
Brian S. Stephan
fbf919b764
bottom panels with overhang for left/right/middle
2023-09-01 15:50:31 -05:00
Brian S. Stephan
9881f6391e
more top panel with overhang options
...
left/middle/right/solo is the overhang stuff, will need to rename the
inset ones at a later point
2023-09-01 13:39:48 -05:00
Brian S. Stephan
bfae2b093b
create a top left (overhang) lever panel
...
this replaces the left-adjusted inset panel, which I didn't use anyway,
and starts normalizing the overhang panels more
2023-09-01 13:38:29 -05:00
Brian S. Stephan
43a036e17c
consolidate button hole and wider cylinder into one object
...
nothing was materially using the non-snap-in cutout anymore (except for
the frame which wasn't updated since removing the bigger cutout
rectangle, so I fixed that), and I want to use it for a template thing
I'm working on, so remove some cruft
2023-08-30 10:02:12 -05:00