this is a crazy one since I tried to fill the corners by hand.
interesting, but I don't know if I'm actually going to use it... but it
works so committing it
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
license is still the same, this just saves duplicating the terms and
standardizes with what I've been doing elsewhere, style-wise
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
50mm - 10mm of panels was fine for some levers but not enough for the
LSX-NOBI, which I personally have a number of. I can't vet every lever
in existence, but I know at least that this was a problem that is solved
by adding 5mm, which seems like a fair trade and not a huge difference
in the final product.
this also helps the fact that at 40mm internal, some buttons + wiring
harnesses were getting pretty tight, mostly relevant at the frame
connection point where the inner bottom panel isn't a basin. this should
help that too.
additionally this has us go back to the 45mm M4 standoff recommendation,
which kinda sucks because it seems like 40mm are easier to find, but as
stated in the notes, the difference is somewhat negligible if you just
use 40mm with longer bolts.
this allows for:
include <parameters.scad>
// override a variable such as
frame_z = 60;
include <components.scad>
which will let individual components tweak settings, e.g. the height of
a frame
the horizontal move sends the dir arc closer to the edge, and the
vertical move puts the top back where it used to be before moving the
rest of the layouts down
both of these choices are entirely subjective
this complicates the print, in that now printing the frame requires
supports, but by cutting in on the bottom the same way as the top, we
can center some stuff better and also make the plates a bit more
interchangeable. this also eliminates the slightly unsightly bottom
panel hanging out in the open, so overall I think it's worth the
printing complication
