Brian S. Stephan
0993c0f292
sales pitch (tongue in cheek) preamble in the README
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-03-06 14:11:20 -06:00
Brian S. Stephan
954ce38f07
clean up the part descriptions slightly in the README
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-03-06 13:31:15 -06:00
Brian S. Stephan
832d5ede8b
update example images in the README
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-03-06 13:30:02 -06:00
Brian S. Stephan
341f6cfc6a
add to the complications of the box frame method in the notes
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-03-06 13:02:43 -06:00
Brian S. Stephan
308c21fb61
add more parts notes to the README
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-03-06 12:01:26 -06:00
Brian S. Stephan
da54b160e9
update the reference to IRC in the README
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-02-25 00:27:50 -06:00
Brian S. Stephan
05dab45152
fix the blown up demo and update it for the docs
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-02-22 13:40:01 -06:00
Brian S. Stephan
180b7deb9e
update costs in the README based on new settings
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-02-22 13:40:01 -06:00
Brian S. Stephan
296e6da14b
link to a couple presences in the README
...
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
2024-02-19 23:35:26 -06:00
Brian S. Stephan
f14c80d8a8
bring the frame Z back to 55mm, for taller levers
...
50mm - 10mm of panels was fine for some levers but not enough for the
LSX-NOBI, which I personally have a number of. I can't vet every lever
in existence, but I know at least that this was a problem that is solved
by adding 5mm, which seems like a fair trade and not a huge difference
in the final product.
this also helps the fact that at 40mm internal, some buttons + wiring
harnesses were getting pretty tight, mostly relevant at the frame
connection point where the inner bottom panel isn't a basin. this should
help that too.
additionally this has us go back to the 45mm M4 standoff recommendation,
which kinda sucks because it seems like 40mm are easier to find, but as
stated in the notes, the difference is somewhat negligible if you just
use 40mm with longer bolts.
2023-11-23 09:32:03 -06:00
Brian S. Stephan
7d3b4c0a6c
update notes on bolts/plate heights
2023-11-10 15:49:26 -06:00
Brian S. Stephan
f2efee40ee
include a finished photo, this time of an inset-based stick
2023-11-10 15:49:14 -06:00
Brian S. Stephan
6fa474b748
update README, need 40mm spacers since chopping the bottom
2023-11-08 18:14:19 -06:00
Brian S. Stephan
a960e57bd1
docs updates for v3
2023-09-17 11:33:49 -05:00
Brian S. Stephan
0611e23975
keep some notes on filament while I'm at it
2023-09-15 15:30:10 -05:00
Brian S. Stephan
87db45df15
complete the cost estimation: total ~$26 for an enclosure
2023-09-15 15:20:17 -05:00
Brian S. Stephan
56367369b7
more panel estimates
2023-09-12 20:19:43 -05:00
Brian S. Stephan
fa304606df
generalize the top panel cost, they should all come in around this
2023-09-12 17:09:30 -05:00
Brian S. Stephan
5d5eb34f8a
top panel cost for something like the lever + dir_arc panel
2023-09-12 13:03:35 -05:00
Brian S. Stephan
17ab4815a6
more cost estimate documentation
2023-09-12 10:36:15 -05:00
Brian S. Stephan
afd548f8d9
correct hardware notes, since v2 the M4 standoffs are 45mm
2023-09-12 10:14:45 -05:00
Brian S. Stephan
e2549694ea
start estimating cost of build
2023-09-12 09:24:33 -05:00
Brian S. Stephan
0e00f8d5d1
with the frame redesign, we can use 16mm M4s
2023-09-07 00:19:42 -05:00
Brian S. Stephan
b911a1b7c1
three section v2 render
2023-09-06 16:24:58 -05:00
Brian S. Stephan
ff19699d61
update TODO and README notes
...
no known issues!
2023-09-06 14:47:14 -05:00
Brian S. Stephan
344de2c84f
standalone frame, with tweaks to the frame as a consequence
...
* frame width has been reduced in order to leave more space and have
sunken buttons somewhat accessible
* the cutout for neutrik mounts has been reduced and moved into the
holes themselves, to do this more modularly and restore some support
2023-08-26 21:57:12 -05:00
Brian S. Stephan
6ca57615e4
solve for 24mm/30mm snap-ins
2023-08-25 15:36:38 -05:00
Brian S. Stephan
f7fa46a074
include an example of what's possible
2023-08-24 23:11:43 -05:00
Brian S. Stephan
9f98f0cfa7
rename project before sharing
2023-08-24 22:49:34 -05:00
Brian S. Stephan
a3608492fb
considerably more README documentation
2023-08-24 19:51:07 -05:00
Brian S. Stephan
144e512433
licensing language tweaks
2023-08-24 15:04:11 -05:00
Brian S. Stephan
9aa881be55
README license and attribution information
2023-08-16 08:25:04 -05:00
Brian S. Stephan
34234d38ae
Initial commit
2023-08-16 08:05:31 -05:00