bss/buildable-stick-system
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 9 Wiki Activity
cd71ed013b
buildable-stick-system/TODO.md
Brian S. Stephan 344de2c84f
standalone frame, with tweaks to the frame as a consequence 
* frame width has been reduced in order to leave more space and have
  sunken buttons somewhat accessible
* the cutout for neutrik mounts has been reduced and moved into the
  holes themselves, to do this more modularly and restore some support
2023-08-26 21:57:12 -05:00

676 B
Raw Blame History

TODO

Notes for "next time".

v2

  • I need at least 5mm, maybe 10mm, more height, to fit some of my levers like the Nobi Bullet
    • I couldn't even fit a JLF without the compensations in v1 on the bottom panel
    • I had to bend the pins a bit on Crown SDB-202s, too
  • The plates bow a bit on the top when pressure is applied, because there's no support from the frame up there --- adding 5mm to the frame should leave a couple mm for support to get added back
  • PCB mount on top-panel-dir_arc-plus-w-30mm-plus-one-with-mount.scad doesn't leave room for a USB cable on the right hand side
  • Engraving some cosmetic stuff? Or maybe a place to mount other plates?