fix some trivial markdown issues

Signed-off-by: Brian S. Stephan <bss@incorporeal.org>

README.md

@@ -135,6 +135,16 @@ Board, ~$60 for Sanwa buttons and a lever, and ~$20 for miscellaneous connectors
 full-featured controller with an open source foundation together for around $140. Reducing wall and infill settings
 will probably save you around $5 of material, and you can probably decide what you want to do from there.
 
+## FAQ
+
+### I get a bunch of warnings on not being able to include files when I open them in OpenSCAD, what do I do?
+
+OpenSCAD pathing is relative to the current working directory by default, which is probably not the `src/` directory.
+When you start OpenSCAD, you must either start it from inside the project's `src/` directory, or point it at the path to
+the source files via e.g. `OPENSCADPATH=path/to/buildable-stick-system/src/ openscad`.
+
+See <https://en.wikibooks.org/wiki/OpenSCAD_User_Manual/Include_Statement>.
+
 ## Miscellany
 
 See the `/docs/` directory for more thoughts too scattered for this document.

demo/all-together-demo-extended-with-windows.scad

@@ -9,7 +9,7 @@ use <frames/pieces/side-trapezoid.scad>
 use <frames/pieces/front-or-back-aux-and-neutrik.scad>
 use <frames/pieces/front-or-back-windowed-horiz-stripes.scad>
 use <panels/inset/lever-and-dir_arc-plus-w-30mm-panel.scad>
-use <panels/inset/sega-2p-nine-plus-control-panel-with-mount.scad>
+use <panels/inset/sega-2p-nine-plus-aux-button-with-mount.scad>
 use <misc/decorative-plate-24mm-button.scad>
 use <misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-nine.scad>
 use <misc/dustwasher-lsx-nobi.scad>
@@ -21,7 +21,7 @@ frame_side_color       = "#8E9089";
 top_deco_color         = "#8E9089";
 
 color(top_panel_color) translate([-panel_x/2, 0, frame_z/2-panel_z+0.01]) lever_and_dir_arc_w_30mm_panel();
-color(top_panel_color) translate([panel_x/2, 0, frame_z/2-panel_z+0.01]) sega_2p_nine_plus_control_panel_with_mount();
+color(top_panel_color) translate([panel_x/2, 0, frame_z/2-panel_z+0.01]) sega_2p_nine_plus_aux_button_with_mount();
 color(frame_side_color) translate([-frame_x/2+4, 0, -2.5]) side_trapezoid_frame_piece();
 color(frame_side_color) translate([frame_x/2-4, 0, -2.5]) mirror([1, 0, 0]) side_trapezoid_frame_piece();
 color(frame_top_bottom_color) translate([-frame_x/2+4, 0, -2.5])  horiz_striped_windowed_front_or_back_frame_piece();

demo/all-together-demo-extended.scad

@@ -5,32 +5,33 @@
 
 include <parameters.scad>
 include <components.scad>
+use <frames/pieces/front-or-back-aux-and-neutrik.scad>
 use <frames/pieces/front-or-back-trapezoid.scad>
 use <frames/pieces/side-trapezoid-extended-to-front-trapezoid.scad>
-use <frames/pieces/front-or-back-aux-and-neutrik.scad>
-use <panels/inset/lever-and-dir_arc-plus-w-30mm-panel.scad>
-use <panels/inset/sega-2p-nine-plus-control-panel-with-mount.scad>
+use <panels/inset/lever-and-dir_arc-plus-w-30mm-panel-with-oled.scad>
+use <panels/inset/sega-2p-nine-plus-aux-button-with-mount.scad>
 use <misc/decorative-plate-24mm-button.scad>
 use <misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-nine.scad>
 use <misc/dustwasher-lsx-nobi.scad>
 
-top_panel_color        = "#5B6579";
-bottom_panel_color     = "#8E9089";
-frame_top_bottom_color = "#8E9089";
-frame_side_color       = "#8E9089";
-top_deco_color         = "#8E9089";
+top_panel_color        = "#0086D6";
+bottom_panel_color     = "white";
+frame_front_color      = "white";
+frame_back_color       = "white";
+frame_side_color       = "yellow";
+top_deco_color         = "white";
 
-color(top_panel_color) translate([-panel_x/2, 0, frame_z/2-panel_z+0.01]) lever_and_dir_arc_w_30mm_panel();
-color(top_panel_color) translate([panel_x/2, 0, frame_z/2-panel_z+0.01]) sega_2p_nine_plus_control_panel_with_mount();
+color(top_panel_color) translate([-panel_x/2, 0, frame_z/2-panel_z+0.01]) lever_and_dir_arc_w_30mm_panel_with_oled();
+color(top_panel_color) translate([panel_x/2, 0, frame_z/2-panel_z+0.01]) sega_2p_nine_plus_aux_button_with_mount();
 color(frame_side_color) translate([-frame_x/2+4, 0, -2.5]) side_trapezoid_extended_to_front_frame_piece();
 color(frame_side_color) translate([frame_x/2-4, 0, -2.5]) mirror([1, 0, 0]) side_trapezoid_extended_to_front_frame_piece();
-color(frame_top_bottom_color) translate([-frame_x/2+4, 0, -2.5])  front_or_back_trapezoid_frame_piece();
-color(frame_top_bottom_color) translate([frame_x/2-4, 0, -2.5])  front_or_back_trapezoid_frame_piece();
-color(frame_top_bottom_color) translate([-frame_x/2+4, 0, -2.5]) rotate([180, 0, 0]) front_or_back_aux_and_neutrik_frame_piece();
-color(frame_top_bottom_color) translate([frame_x/2-4, 0, -2.5]) rotate([180, 180, 0]) front_or_back_aux_and_neutrik_frame_piece();
+color(frame_front_color) translate([-frame_x/2+4, 0, -2.5])  front_or_back_trapezoid_frame_piece();
+color(frame_front_color) translate([frame_x/2-4, 0, -2.5])  front_or_back_trapezoid_frame_piece();
+color(frame_back_color) translate([-frame_x/2+4, 0, -2.5]) rotate([180, 0, 0]) front_or_back_aux_and_neutrik_frame_piece();
+color(frame_back_color) translate([frame_x/2-4, 0, -2.5]) rotate([180, 180, 0]) front_or_back_aux_and_neutrik_frame_piece();
 color(bottom_panel_color) translate([-panel_x/2, 0, -5-frame_z/2+5]) panel();
 color(bottom_panel_color) translate([panel_x/2, 0, -5-frame_z/2+5]) panel();
 
 color(top_deco_color) translate([0, 0, 3+frame_z/2-panel_z]) dir_arc_plus_w_30mm_and_sega_2p_nine_decorative_plate();
-color(top_deco_color) translate([-170, 20, 3+frame_z/2-panel_z]) lsx_nobi_dustwasher();
+color(top_deco_color) translate([-170, 20, 3+frame_z/2-panel_z]) rotate([180, 0, 0]) lsx_nobi_dustwasher();
 color(top_deco_color) translate([panel_x-24, 30, 3+frame_z/2-panel_z]) button_24mm_decorative_plate();

demo/all-together-demo.scad

@@ -9,11 +9,10 @@ use <frames/pieces/side.scad>
 use <frames/pieces/front-or-back.scad>
 use <frames/pieces/front-or-back-aux-and-neutrik.scad>
 use <panels/inset/lever-and-dir_arc-plus-w-30mm-panel.scad>
-use <panels/inset/sega-2p-nine-plus-control-panel-with-mount.scad>
+use <panels/inset/sega-2p-nine-plus-aux-button-with-mount.scad>
 use <misc/decorative-plate-24mm-button.scad>
 use <misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-nine.scad>
 use <misc/dustwasher-lsx-nobi.scad>
-use <misc/decorative-corner.scad>
 
 panel_color    = "red";
 base_color     = "gray";
@@ -21,7 +20,7 @@ top_deco_color = "white";
 brace_color    = "gray";
 
 color(panel_color) translate([-panel_x/2, 0, frame_z/2-panel_z/2+0.001]) lever_and_dir_arc_w_30mm_panel();
-color(panel_color) translate([panel_x/2, 0, frame_z/2-panel_z/2+0.001]) sega_2p_nine_plus_control_panel_with_mount();
+color(panel_color) translate([panel_x/2, 0, frame_z/2-panel_z/2+0.001]) sega_2p_nine_plus_aux_button_with_mount();
 color(base_color) translate([panel_x/2, 0, 0]) rotate([0, 180, 0]) side_frame_piece();
 color(base_color) translate([-panel_x/2, 0, 0]) side_frame_piece();
 color(base_color) translate([panel_x/2, 0, 0]) front_or_back_frame_piece();
@@ -31,11 +30,6 @@ color(base_color) translate([-panel_x/2, 0, 0]) rotate([180, 0, 0]) front_or_bac
 color(base_color) translate([-panel_x/2, 0, -frame_z/2+panel_z/2]) panel();
 color(base_color) translate([panel_x/2, 0, -frame_z/2+panel_z/2]) panel();
 
-color(brace_color) translate([-panel_x/2, 0, 0]) decorative_corner();
-color(brace_color) mirror([1, 0, 0]) translate([-panel_x/2, 0, 0]) decorative_corner();
-color(brace_color) mirror([0, 1, 0]) translate([-panel_x/2, 0, 0]) decorative_corner();
-color(brace_color) mirror([1, 0, 0]) mirror([0, 1, 0]) translate([-panel_x/2, 0, 0]) decorative_corner();
-
 color(top_deco_color) translate([0, 0, 4+frame_z/2-panel_z/2+0.001]) dir_arc_plus_w_30mm_and_sega_2p_nine_decorative_plate();
 color(top_deco_color) translate([-170, 20, 4+frame_z/2-panel_z/2+0.001]) lsx_nobi_dustwasher();
 color(top_deco_color) translate([panel_x-24, 30, 4+frame_z/2-panel_z/2+0.001]) button_24mm_decorative_plate();

demo/blown-up-demo.scad

@@ -10,14 +10,14 @@ use <frames/pieces/side.scad>
 use <frames/pieces/front-or-back.scad>
 use <frames/pieces/front-or-back-aux-and-neutrik.scad>
 use <panels/overhang/left-lever-and-dir_arc-plus-w-30mm-panel.scad>
-use <panels/overhang/right-sega-2p-nine-plus-control-panel-with-mount.scad>
+use <panels/overhang/right-sega-2p-nine-plus-aux-button-with-mount.scad>
 use <panels/overhang/left-or-right-panel.scad>
 use <misc/decorative-plate-24mm-button.scad>
 use <misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-nine.scad>
 use <misc/dustwasher-lsx-nobi.scad>
 
 color("#C12E1F") translate([-panel_x/2-25, 0, frame_z/2+75]) lever_and_dir_arc_w_30mm_left_overhang_panel();
-color("#C12E1F") translate([panel_x/2+25, 0, frame_z/2+75]) sega_2p_nine_plus_control_right_overhang_panel_with_mount();
+color("#C12E1F") translate([panel_x/2+25, 0, frame_z/2+75]) sega_2p_nine_plus_aux_button_right_overhang_panel_with_mount();
 color("black") translate([-frame_x/2+5-25, -55, -2.5]) front_or_back_frame_piece();
 color("black") rotate([0, 180, 0]) translate([-frame_x/2+5-25, -55, -2.5]) front_or_back_frame_piece();
 color("black") translate([-frame_x/2+5-50, 0, -2.5]) side_frame_piece();

src/components.scad

@@ -107,16 +107,24 @@ module m2_mount_post() {
 	}
 }
 
-module oled_ssd1306_mount() {
-	translate([11.5, 12, 0]) m2_mount_post();
-	translate([11.5, -12, 0]) m2_mount_post();
-	translate([-11.5, 12, 0]) m2_mount_post();
-	translate([-11.5, -12, 0]) m2_mount_post();
+module adafruit_pid_326_oled_ssd1306_mount_post() {
+	cylinder(r=2.25/2, h=8, $fn=50, center=true);
 }
 
-module oled_ssd1306_mount_cutout() {
-	translate([0, 1.9, 0]) cube([25, 14, 5], center=true);
-	translate([0, 0, -1.0]) cube([35, 35, 4], center=true);
+// aligned to the cutout below
+module adafruit_pid_326_oled_ssd1306_mount() {
+	translate([12, 13.25, -2]) adafruit_pid_326_oled_ssd1306_mount_post();
+	translate([12, -13.25, -2]) adafruit_pid_326_oled_ssd1306_mount_post();
+	translate([-12, 13.25, -2]) adafruit_pid_326_oled_ssd1306_mount_post();
+	translate([-12, -13.25, -2]) adafruit_pid_326_oled_ssd1306_mount_post();
+}
+
+module adafruit_pid_326_oled_ssd1306_mount_cutout() {
+	translate([0, 3.5, 0]) cube([ssd1306_x, ssd1306_y, panel_z+0.1], center=true);
+	translate([0, 0, -ssd1306_z/2]) cube([adafruit_pid_326_oled_ssd1306_cutout_x,
+		adafruit_pid_326_oled_ssd1306_cutout_y, panel_z-ssd1306_z+0.1], center=true);
+	translate([0, 0, -ssd1306_z/2-2]) cube([adafruit_pid_326_oled_ssd1306_cutout_x*3/2,
+		adafruit_pid_326_oled_ssd1306_cutout_y/2, panel_z/2+0.1], center=true);
 }
 
 module m3_mount_post() {

src/misc/m4-hex-spacer-sleeve.scad

@@ -0,0 +1,24 @@
+/* Wrap a smaller width hex spacer with plastic to get it to fit in our standard post hole.
+ *
+ * Since the hex spacers can vary in width, you may have to adjust the inner dimensions
+ * to make this work right for your piece, but this worked right for mine. YMMV.
+ *
+ * SPDX-FileCopyrightText: © 2025 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+include <parameters.scad>
+include <components.scad>
+
+module small_m4_hole() {
+	scale([1, 1, 2]) cylinder(r=3.25, h=frame_z, $fn=6, center=true);
+}
+
+module m4_hex_spacer_sleeve() {
+	difference() {
+		resize([0, 0, 45]) frame_hex_bolt_hole();
+		small_m4_hole();
+	}
+}
+
+
+m4_hex_spacer_sleeve();

src/panels/inset/lever-and-dir_arc-plus-w-30mm-panel-with-oled.scad

@@ -0,0 +1,18 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <lever-and-dir_arc-plus-w-30mm-panel.scad>
+
+module lever_and_dir_arc_w_30mm_panel_with_oled() {
+	difference() {
+		lever_and_dir_arc_w_30mm_panel();
+		translate([0, -(panel_y/2 - 22), 0]) adafruit_pid_326_oled_ssd1306_mount_cutout();
+	}
+	translate([0, -(panel_y/2 - 22), 0]) adafruit_pid_326_oled_ssd1306_mount();
+}
+
+lever_and_dir_arc_w_30mm_panel_with_oled();

src/panels/inset/sega-2p-nine-plus-aux-button-with-mount.scad

@@ -5,11 +5,11 @@
 
 include <parameters.scad>
 include <components.scad>
-use <sega-2p-nine-plus-control-panel.scad>
+use <sega-2p-nine-plus-aux-button.scad>
 
-module sega_2p_nine_plus_control_panel_with_mount() {
-	sega_2p_nine_plus_control_panel();
+module sega_2p_nine_plus_aux_button_with_mount() {
+	sega_2p_nine_plus_aux_button();
 	translate([30, -50, -(panel_z/2) - 3]) pcb_mount();
 }
 
-sega_2p_nine_plus_control_panel_with_mount();
+sega_2p_nine_plus_aux_button_with_mount();

src/panels/inset/sega-2p-nine-plus-aux-button.scad

@@ -6,7 +6,7 @@
 include <parameters.scad>
 include <components.scad>
 
-module sega_2p_nine_plus_control_panel() {
+module sega_2p_nine_plus_aux_button() {
 	difference() {
 		panel();
 		sega_2p_nine();
@@ -14,4 +14,4 @@ module sega_2p_nine_plus_control_panel() {
 	}
 }
 
-sega_2p_nine_plus_control_panel();
+sega_2p_nine_plus_aux_button();

src/panels/overhang/right-sega-2p-nine-control-panel-with-mount-with-oled.scad

@@ -1,18 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <right-sega-2p-nine-plus-control-panel-with-mount.scad>
-
-module sega_2p_nine_plus_control_right_overhang_panel_with_mount_with_oled() {
-	difference() {
-		sega_2p_nine_plus_control_right_overhang_panel_with_mount();
-		translate([75, 77.5, 0]) oled_ssd1306_mount_cutout();
-	}
-	translate([75, 77.5, 0.5]) oled_ssd1306_mount();
-}
-
-sega_2p_nine_plus_control_right_overhang_panel_with_mount_with_oled();

src/panels/overhang/right-sega-2p-nine-plus-aux-button-with-mount.scad

@@ -5,11 +5,11 @@
 
 include <parameters.scad>
 include <components.scad>
-use <right-sega-2p-nine-plus-control-panel.scad>
+use <right-sega-2p-nine-plus-aux-button.scad>
 
-module sega_2p_nine_plus_control_right_overhang_panel_with_mount() {
-	sega_2p_nine_plus_control_right_overhang_panel();
+module sega_2p_nine_plus_aux_button_right_overhang_panel_with_mount() {
+	sega_2p_nine_plus_aux_button_right_overhang_panel();
 	translate([30, -50, -(panel_z/2) - 3]) pcb_mount();
 }
 
-sega_2p_nine_plus_control_right_overhang_panel_with_mount();
+sega_2p_nine_plus_aux_button_right_overhang_panel_with_mount();

src/panels/overhang/right-sega-2p-nine-plus-aux-button.scad

@@ -6,7 +6,7 @@
 include <parameters.scad>
 include <components.scad>
 
-module sega_2p_nine_plus_control_right_overhang_panel() {
+module sega_2p_nine_plus_aux_button_right_overhang_panel() {
 	difference() {
 		panel_with_raised_overhang();
 		sega_2p_nine();
@@ -15,4 +15,4 @@ module sega_2p_nine_plus_control_right_overhang_panel() {
 	}
 }
 
-sega_2p_nine_plus_control_right_overhang_panel();
+sega_2p_nine_plus_aux_button_right_overhang_panel();

src/parameters.scad

@@ -134,6 +134,13 @@ stand_x = 5;
 stand_y = frame_z;
 stand_z = 15;
 
+// oled cutout stuff
+ssd1306_x = 23;
+ssd1306_y = 12;
+ssd1306_z = 1;
+adafruit_pid_326_oled_ssd1306_cutout_x = 30;
+adafruit_pid_326_oled_ssd1306_cutout_y = 32;
+
 
 // LAYOUTS