make the 24mm ergo variant quasi-official

I tested it and managed to cram it all onto one panel, and the dimensions seem cromulent, so I'm going to call it supported, even if it remains unused
correct label for example photo
2026-02-09 07:49:02 -06:00 · 2026-02-09 07:44:36 -06:00 · 2026-01-06 16:38:24 -06:00 · 2026-01-03 22:18:48 -06:00 · 2026-01-03 22:15:48 -06:00 · 2026-01-03 22:12:08 -06:00
62 changed files with 497 additions and 213 deletions
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@@ -2,6 +2,20 @@

 Included is a summary of changes to the project, by version. Details can be found in the commit history.

+## v4.7.1
+
+### Fixes
+
+* Hull-based decorative plates were accidentally grown in v4.7.0 due to ye olde refactoring. They are back to the
+  dimensions they should be (give or take) because there was an underlying bug in how they were geometried pre-v4.7.1.
+* The docs/ directory in the build now includes the images referred to, especially in the README.
+
+### Miscellaneous
+
+* Some README tweaks, including another demonstrative photo.
+* The build creates both a ZIP of everything, including docs, for humans to download, and also a ZIP of *just* the STLs,
+  to ease uploading to Printables.
+
 ## v4.7.0

 ### Features
--- a/6
+++ b/6
@@ -3,11 +3,11 @@ all:
 	mkdir -p ./build/docs
 	cp ./README.md ./build/README.md
 	cp ./docs/README-objects.md ./build/README-objects.md
-	cp ./docs/assembly-and-tips.md ./build/docs/assembly-and-tips.md
-	cp ./docs/printing-and-materials.md ./build/docs/printing-and-materials.md
+	cp ./docs/* ./build/docs/
 	cp ./LICENSE ./build/LICENSE
 	cp ./CHANGELOG.md ./build/CHANGELOG.md
-	pushd ./build; zip ./buildable-stick-system-`git describe --dirty`-stls.zip . -r; popd
+	pushd ./build; zip ./buildable-stick-system-`git describe --dirty`-stls-and-docs.zip . -r; popd
+	pushd ./build; zip ./buildable-stick-system-`git describe --dirty`-stls.zip extras frames misc panels -r; popd

 clean:
 	rm -rf ./build
--- a/README.md
+++ b/README.md
@@ -1,6 +1,6 @@
 # The Buildable Stick System

-Files for 3D printing an arcade stick.
+Files for 3D printing and building an arcade stick enclosure.

 Have you ever wanted to conjure your own arcade stick out of the ether (well, plastic), or to prototype a new layout or
 design before sending it to a custom builder? Do you just love having your space filled with arcade stick enclosures,
@@ -16,7 +16,7 @@ Randomus](https://webirc.randomus.net/#buildable-stick-system)!**

 ![A photo of a completed stick](docs/finished-v4.4.jpg)

-[Photo of a completed inset panel-based stick.]
+[Photo of a completed overhang panel-based stick.]

 Originally an attempt to make a couple customized STL files for the [OpenStickCommunity Fightstick
 Case](https://github.com/OpenStickCommunity/Hardware/tree/main/Fightstick%20Case), the changes ballooned to fit my
@@ -57,11 +57,15 @@ about what the types of parts are and how to use them:
      these is that they aren't as reusable as the inset panels, since the inset panels can go anywhere, but the
      overhang panels must be designed to not overlap with other overhang panels, so you might have to make more custom
      variants depending on where you put things.
-* `misc/`
-    * Pieces that I haven't organized better (yet) --- there are decorative plates for top buttons and similar to give
+* `plates/`
+    * Flat pieces used for cosmetic or connective reasons --- decorative plates for top buttons and similar to give
      more color variance and some layers to the arcade stick, some very simple dustwashers, plates that fit rocker
      switches and the like in Neutrik D or 20mm holes, and a lever mount spacer for getting your lever shaft at the
      desired height. You don't *need* any of these, but you'll probably use a few.
+* `misc/`
+    * Pieces that I haven't organized better (yet) --- odd things and scratch ideas, mostly. There are some decorative
+      corners for a bit more height/nicer seams, a sleeve to make smaller hex spacers fit in the hole as they're
+      supposed to, things of that nature.
 * `extras/`
    * Various experiments and things not directly related to making an arcade stick. At time of writing, there's a
      couple pieces for a little stand for the stick, solely for vanity purposes.
@@ -135,6 +139,16 @@ Board, ~$60 for Sanwa buttons and a lever, and ~$20 for miscellaneous connectors
 full-featured controller with an open source foundation together for around $140. Reducing wall and infill settings
 will probably save you around $5 of material, and you can probably decide what you want to do from there.

+## FAQ
+
+### I get a bunch of warnings on not being able to include files when I open them in OpenSCAD, what do I do?
+
+OpenSCAD pathing is relative to the current working directory by default, which is probably not the `src/` directory.
+When you start OpenSCAD, you must either start it from inside the project's `src/` directory, or point it at the path to
+the source files via e.g. `OPENSCADPATH=path/to/buildable-stick-system/src/ openscad`.
+
+See <https://en.wikibooks.org/wiki/OpenSCAD_User_Manual/Include_Statement>.
+
 ## Miscellany

 See the `/docs/` directory for more thoughts too scattered for this document.
@@ -195,3 +209,9 @@ like the below should suffice in either electronic or printed form:

 > This arcade stick is part of the Buildable Stick System, version X.Y.Z; the source code to this program is available
 > under the terms of the GNU General Public License, at [LINK].
+
+## Gallery
+
+More photos.
+
+![A photo of three completed sticks](docs/finished-v4.7-x3.jpg)
--- a/demo/all-together-demo-extended-with-windows.scad
+++ b/demo/all-together-demo-extended-with-windows.scad
@@ -9,10 +9,10 @@ use <frames/pieces/side-trapezoid.scad>
 use <frames/pieces/front-or-back-aux-and-neutrik.scad>
 use <frames/pieces/front-or-back-windowed-horiz-stripes.scad>
 use <panels/inset/lever-and-dir_arc-plus-w-30mm-panel.scad>
-use <panels/inset/sega-2p-nine-plus-control-panel-with-mount.scad>
-use <misc/decorative-plate-24mm-button.scad>
-use <misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-nine.scad>
-use <misc/dustwasher-lsx-nobi.scad>
+use <panels/inset/sega-2p-nine-plus-aux-button-with-mount.scad>
+use <plates/decorative-plate-24mm-button.scad>
+use <plates/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-nine.scad>
+use <plates/dustwasher-lsx-nobi.scad>

 top_panel_color        = "#5B6579";
 bottom_panel_color     = "#8E9089";
@@ -21,7 +21,7 @@ frame_side_color       = "#8E9089";
 top_deco_color         = "#8E9089";

 color(top_panel_color) translate([-panel_x/2, 0, frame_z/2-panel_z+0.01]) lever_and_dir_arc_w_30mm_panel();
-color(top_panel_color) translate([panel_x/2, 0, frame_z/2-panel_z+0.01]) sega_2p_nine_plus_control_panel_with_mount();
+color(top_panel_color) translate([panel_x/2, 0, frame_z/2-panel_z+0.01]) sega_2p_nine_plus_aux_button_with_mount();
 color(frame_side_color) translate([-frame_x/2+4, 0, -2.5]) side_trapezoid_frame_piece();
 color(frame_side_color) translate([frame_x/2-4, 0, -2.5]) mirror([1, 0, 0]) side_trapezoid_frame_piece();
 color(frame_top_bottom_color) translate([-frame_x/2+4, 0, -2.5])  horiz_striped_windowed_front_or_back_frame_piece();
@@ -31,7 +31,6 @@ color(frame_top_bottom_color) translate([frame_x/2-4, 0, -2.5]) rotate([180, 180
 color(bottom_panel_color) translate([-panel_x/2, 0, -5-frame_z/2+5]) panel();
 color(bottom_panel_color) translate([panel_x/2, 0, -5-frame_z/2+5]) panel();

-/* color(top_deco_color) translate([0, 0, 3+frame_z/2-4]) dir_arc_plus_w_30mm_and_sega_2p_nine_decorative_plate_of_plates(); */
 color(top_deco_color) translate([0, 0, 3+frame_z/2-panel_z]) dir_arc_plus_w_30mm_and_sega_2p_nine_decorative_plate();
 color(top_deco_color) translate([-170, 20, 3+frame_z/2-panel_z]) lsx_nobi_dustwasher();
 color(top_deco_color) translate([panel_x-24, 30, 3+frame_z/2-panel_z]) button_24mm_decorative_plate();
--- a/demo/all-together-demo-extended.scad
+++ b/demo/all-together-demo-extended.scad
@@ -5,32 +5,33 @@

 include <parameters.scad>
 include <components.scad>
-use <frames/pieces/front-or-back-trapezoid.scad>
 use <frames/pieces/side-trapezoid-extended-to-front-trapezoid.scad>
+use <frames/pieces/front-or-back-trapezoid.scad>
 use <frames/pieces/front-or-back-aux-and-neutrik.scad>
-use <panels/inset/lever-and-dir_arc-plus-w-30mm-panel.scad>
-use <panels/inset/sega-2p-nine-plus-control-panel-with-mount.scad>
-use <misc/decorative-plate-24mm-button.scad>
-use <misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-nine.scad>
-use <misc/dustwasher-lsx-nobi.scad>
+use <panels/inset/lever-and-ergo-wasd-five-panel-with-oled.scad>
+use <panels/inset/ergo-nine-plus-aux-button-with-mount.scad>
+use <plates/decorative-plate-24mm-button.scad>
+use <plates/decorative-plate-ergo-wasd-five-30mm-and-ergo-nine-30mm.scad>
+use <plates/dustwasher-lsx-nobi.scad>

-top_panel_color        = "#5B6579";
-bottom_panel_color     = "#8E9089";
-frame_top_bottom_color = "#8E9089";
-frame_side_color       = "#8E9089";
-top_deco_color         = "#8E9089";
+top_panel_color        = "#0086D6";
+bottom_panel_color     = "white";
+frame_front_color      = "white";
+frame_back_color       = "white";
+frame_side_color       = "yellow";
+top_deco_color         = "white";

-color(top_panel_color) translate([-panel_x/2, 0, frame_z/2-panel_z+0.01]) lever_and_dir_arc_w_30mm_panel();
-color(top_panel_color) translate([panel_x/2, 0, frame_z/2-panel_z+0.01]) sega_2p_nine_plus_control_panel_with_mount();
-color(frame_side_color) translate([-frame_x/2+4, 0, -2.5]) side_trapezoid_extended_to_front_frame_piece();
-color(frame_side_color) translate([frame_x/2-4, 0, -2.5]) mirror([1, 0, 0]) side_trapezoid_extended_to_front_frame_piece();
-color(frame_top_bottom_color) translate([-frame_x/2+4, 0, -2.5])  front_or_back_trapezoid_frame_piece();
-color(frame_top_bottom_color) translate([frame_x/2-4, 0, -2.5])  front_or_back_trapezoid_frame_piece();
-color(frame_top_bottom_color) translate([-frame_x/2+4, 0, -2.5]) rotate([180, 0, 0]) front_or_back_aux_and_neutrik_frame_piece();
-color(frame_top_bottom_color) translate([frame_x/2-4, 0, -2.5]) rotate([180, 180, 0]) front_or_back_aux_and_neutrik_frame_piece();
-color(bottom_panel_color) translate([-panel_x/2, 0, -5-frame_z/2+5]) panel();
-color(bottom_panel_color) translate([panel_x/2, 0, -5-frame_z/2+5]) panel();
+color(top_panel_color) translate([-panel_x/2, 0, frame_z/2-panel_z/2+0.001]) lever_and_ergo_wasd_five_panel_with_oled();
+color(top_panel_color) translate([panel_x/2, 0, frame_z/2-panel_z/2+0.001]) ergo_nine_plus_aux_button_panel_with_mount();
+color(frame_side_color) translate([-frame_x/2+4, 0, 0]) side_trapezoid_extended_to_front_frame_piece();
+color(frame_side_color) translate([frame_x/2-4, 0, 0]) mirror([1, 0, 0]) side_trapezoid_extended_to_front_frame_piece();
+color(frame_front_color) translate([-frame_x/2+4, 0, 0])  front_or_back_trapezoid_frame_piece();
+color(frame_front_color) translate([frame_x/2-4, 0, 0])  front_or_back_trapezoid_frame_piece();
+color(frame_back_color) translate([-frame_x/2+4, 0, 0]) rotate([180, 0, 0]) front_or_back_aux_and_neutrik_frame_piece();
+color(frame_back_color) translate([frame_x/2-4, 0, 0]) rotate([180, 180, 0]) front_or_back_aux_and_neutrik_frame_piece();
+/* color(bottom_panel_color) translate([-panel_x/2, 0, -5-frame_z/2+5]) panel(); */
+/* color(bottom_panel_color) translate([panel_x/2, 0, -5-frame_z/2+5]) panel(); */

-color(top_deco_color) translate([0, 0, 3+frame_z/2-panel_z]) dir_arc_plus_w_30mm_and_sega_2p_nine_decorative_plate();
-color(top_deco_color) translate([-170, 20, 3+frame_z/2-panel_z]) lsx_nobi_dustwasher();
-color(top_deco_color) translate([panel_x-24, 30, 3+frame_z/2-panel_z]) button_24mm_decorative_plate();
+color(top_deco_color) translate([0, 0, 4+frame_z/2-panel_z/2+0.001]) ergo_wasd_five_30mm_and_ergo_nine_30mm_decorative_plate();
+color(top_deco_color) translate([-170, 25, 4+frame_z/2-panel_z/2+0.001]) lsx_nobi_dustwasher();
+color(top_deco_color) translate([panel_x-24, 30, 4+frame_z/2-panel_z/2+0.001]) button_24mm_decorative_plate();
--- a/demo/all-together-demo-solo.scad
+++ b/demo/all-together-demo-solo.scad
@@ -10,7 +10,7 @@ use <frames/pieces/side-trapezoid-extended-to-front-trapezoid.scad>
 use <frames/pieces/front-or-back-aux-and-neutrik.scad>
 use <panels/inset/lever-and-dir_arc-plus-w-30mm-panel.scad>
 use <panels/inset/lever-and-sega-2p-6-button-panel-with-aux-with-mount.scad>
-use <misc/dustwasher-jlf.scad>
+use <plates/dustwasher-jlf.scad>

 top_panel_color        = "#5B6579";
 bottom_panel_color     = "#8E9089";
--- a/demo/all-together-demo.scad
+++ b/demo/all-together-demo.scad
@@ -8,34 +8,28 @@ include <components.scad>
 use <frames/pieces/side.scad>
 use <frames/pieces/front-or-back.scad>
 use <frames/pieces/front-or-back-aux-and-neutrik.scad>
-use <panels/inset/lever-and-dir_arc-plus-w-30mm-panel.scad>
-use <panels/inset/sega-2p-nine-plus-control-panel-with-mount.scad>
-use <misc/decorative-plate-24mm-button.scad>
-use <misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-nine.scad>
-use <misc/dustwasher-lsx-nobi.scad>
-use <misc/decorative-corner.scad>
+use <panels/inset/lever-and-ergo-wasd-five-panel-with-oled.scad>
+use <panels/inset/ergo-nine-plus-aux-button-with-mount.scad>
+use <plates/decorative-plate-24mm-button.scad>
+use <plates/decorative-plate-ergo-wasd-five-30mm-and-ergo-nine-30mm.scad>
+use <plates/dustwasher-lsx-nobi.scad>

 panel_color    = "red";
 base_color     = "gray";
 top_deco_color = "white";
 brace_color    = "gray";

-color(panel_color) translate([-panel_x/2, 0, frame_z/2-panel_z/2+0.001]) lever_and_dir_arc_w_30mm_panel();
-color(panel_color) translate([panel_x/2, 0, frame_z/2-panel_z/2+0.001]) sega_2p_nine_plus_control_panel_with_mount();
+color(panel_color) translate([-panel_x/2, 0, frame_z/2-panel_z/2+0.001]) lever_and_ergo_wasd_five_panel_with_oled();
+color(panel_color) translate([panel_x/2, 0, frame_z/2-panel_z/2+0.001]) ergo_nine_plus_aux_button_panel_with_mount();
 color(base_color) translate([panel_x/2, 0, 0]) rotate([0, 180, 0]) side_frame_piece();
 color(base_color) translate([-panel_x/2, 0, 0]) side_frame_piece();
-color(base_color) translate([panel_x/2, 0, 0]) front_or_back_frame_piece();
-color(base_color) translate([-panel_x/2, 0, 0]) front_or_back_frame_piece();
+color(base_color) translate([panel_x/2, 0, 0]) clean_edge_front_or_back_frame_piece();
+color(base_color) translate([-panel_x/2, 0, 0]) clean_edge_front_or_back_frame_piece();
 color(base_color) translate([panel_x/2, 0, 0]) rotate([180, 180, 0]) front_or_back_aux_and_neutrik_frame_piece();
 color(base_color) translate([-panel_x/2, 0, 0]) rotate([180, 0, 0]) front_or_back_aux_and_neutrik_frame_piece();
-color(base_color) translate([-panel_x/2, 0, -frame_z/2+panel_z/2]) panel();
-color(base_color) translate([panel_x/2, 0, -frame_z/2+panel_z/2]) panel();
+/* color(base_color) translate([-panel_x/2, 0, -frame_z/2+panel_z/2]) panel(); */
+/* color(base_color) translate([panel_x/2, 0, -frame_z/2+panel_z/2]) panel(); */

-color(brace_color) translate([-panel_x/2, 0, 0]) decorative_corner();
-color(brace_color) mirror([1, 0, 0]) translate([-panel_x/2, 0, 0]) decorative_corner();
-color(brace_color) mirror([0, 1, 0]) translate([-panel_x/2, 0, 0]) decorative_corner();
-color(brace_color) mirror([1, 0, 0]) mirror([0, 1, 0]) translate([-panel_x/2, 0, 0]) decorative_corner();
-
-color(top_deco_color) translate([0, 0, 4+frame_z/2-panel_z/2+0.001]) dir_arc_plus_w_30mm_and_sega_2p_nine_decorative_plate();
-color(top_deco_color) translate([-170, 20, 4+frame_z/2-panel_z/2+0.001]) lsx_nobi_dustwasher();
+color(top_deco_color) translate([0, 0, 4+frame_z/2-panel_z/2+0.001]) ergo_wasd_five_30mm_and_ergo_nine_30mm_decorative_plate();
+color(top_deco_color) translate([-170, 25, 4+frame_z/2-panel_z/2+0.001]) lsx_nobi_dustwasher();
 color(top_deco_color) translate([panel_x-24, 30, 4+frame_z/2-panel_z/2+0.001]) button_24mm_decorative_plate();
--- a/demo/blown-up-demo.scad
+++ b/demo/blown-up-demo.scad
@@ -10,16 +10,16 @@ use <frames/pieces/side.scad>
 use <frames/pieces/front-or-back.scad>
 use <frames/pieces/front-or-back-aux-and-neutrik.scad>
 use <panels/overhang/left-lever-and-dir_arc-plus-w-30mm-panel.scad>
-use <panels/overhang/right-sega-2p-nine-plus-control-panel-with-mount.scad>
+use <panels/overhang/right-sega-2p-nine-plus-aux-button-with-mount.scad>
 use <panels/overhang/left-or-right-panel.scad>
-use <misc/decorative-plate-24mm-button.scad>
-use <misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-nine.scad>
-use <misc/dustwasher-lsx-nobi.scad>
+use <plates/decorative-plate-24mm-button.scad>
+use <plates/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-nine.scad>
+use <plates/dustwasher-lsx-nobi.scad>

 color("#C12E1F") translate([-panel_x/2-25, 0, frame_z/2+75]) lever_and_dir_arc_w_30mm_left_overhang_panel();
-color("#C12E1F") translate([panel_x/2+25, 0, frame_z/2+75]) sega_2p_nine_plus_control_right_overhang_panel_with_mount();
-color("black") translate([-frame_x/2+5-25, -55, -2.5]) front_or_back_frame_piece();
-color("black") rotate([0, 180, 0]) translate([-frame_x/2+5-25, -55, -2.5]) front_or_back_frame_piece();
+color("#C12E1F") translate([panel_x/2+25, 0, frame_z/2+75]) sega_2p_nine_plus_aux_button_right_overhang_panel_with_mount();
+color("black") translate([-frame_x/2+5-25, -55, -2.5]) clean_edge_front_or_back_frame_piece();
+color("black") rotate([0, 180, 0]) translate([-frame_x/2+5-25, -55, -2.5]) clean_edge_front_or_back_frame_piece();
 color("black") translate([-frame_x/2+5-50, 0, -2.5]) side_frame_piece();
 color("black") rotate([0, 180, 0]) translate([-frame_x/2+5-50, 0, -2.5]) side_frame_piece();
 color("black") rotate([180, 0, 0]) translate([-frame_x/2+5-25, -55, -2.5]) front_or_back_aux_and_neutrik_frame_piece();
--- a/docs/assembly-and-tips.md
+++ b/docs/assembly-and-tips.md
@@ -27,17 +27,17 @@ The pieces you need to print (all colors to your taste):
 The above gets you the basics. Some common things you may also want:

 * **Mounting Neutrik connectors:** Neutrik D connectors can mount flush to the inside of the frame, but you can choose
-  to have a little decorative plate (`misc/neutrik-d-plate.stl` for added depth or color choices on the outside of the
+  to have a little decorative plate (`plates/neutrik-d-plate.stl` for added depth or color choices on the outside of the
  frame, if you'd like.
 * **Mounting a 24mm switch:** a rocker switch can also be mounted in the Neutrik D connector, but it needs to be placed
-  into a `misc/neutrik-d-plate-24mm-hole.stl` plate, and the plate mounted to the frame.
+  into a `plates/neutrik-d-plate-24mm-hole.stl` plate, and the plate mounted to the frame.
 * **Flair for the auxillary buttons:** the three buttons in a row on the back of the frame can also get some style, just
-  place a `misc/decorative-plate-aux-control-three-button-cluster.stl` between the buttons and the frame. This only
+  place a `plates/decorative-plate-aux-control-three-button-cluster.stl` between the buttons and the frame. This only
  works for screw-in buttons.
 * **Flair for the top buttons:** same as above, a decorative plate for top panel layouts --- e.g.
-  `misc/decorative-plate-sega-2p.stl` --- can be sandwiched between the buttons and panel to add some style. This also
+  `plates/decorative-plate-sega-2p.stl` --- can be sandwiched between the buttons and panel to add some style. This also
  only tends to work on screw-in buttons.
-* **Dustwashers/flair:** same deal, if you want to print one, use e.g. `misc/dustwasher-jlf.stl`.
+* **Dustwashers/flair:** same deal, if you want to print one, use e.g. `plates/dustwasher-jlf.stl`.

 ## Putting a BSS Stick Together

@@ -53,9 +53,9 @@ following is the most consistent way I've found to put one together.
   overall assembly works with your components, so again get your buttons, lever, etc., in place. You can secure them at
   this point.
    1. If you are using a button decorative plate that spans two panels --- e.g.
-       `misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one` --- take care to align the two panels as tightly
+       `plates/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one` --- take care to align the two panels as tightly
       as possible, and accurately, as they will be hard to adjust once everything is secured and in the frame.
-    2. If using a lever, don't forget the lever mount spacer --- `misc/lever-mount-sanwa-seimitsu` --- if you want it,
+    2. If using a lever, don't forget the lever mount spacer --- `plates/lever-mount-sanwa-seimitsu` --- if you want it,
       and tighten those mounting bolts now as well.
 3. Create the frame box by combining your frame piece parts, box or extended, together. This will be relatively stable
   just via friction fit.
--- a/docs/finished-v4.7-x3.jpg
+++ b/docs/finished-v4.7-x3.jpg
--- a/src/components.scad
+++ b/src/components.scad
@@ -107,16 +107,24 @@ module m2_mount_post() {
 	}
 }

-module oled_ssd1306_mount() {
-	translate([11.5, 12, 0]) m2_mount_post();
-	translate([11.5, -12, 0]) m2_mount_post();
-	translate([-11.5, 12, 0]) m2_mount_post();
-	translate([-11.5, -12, 0]) m2_mount_post();
+module adafruit_pid_326_oled_ssd1306_mount_post() {
+	cylinder(r=2.25/2, h=8, $fn=50, center=true);
 }

-module oled_ssd1306_mount_cutout() {
-	translate([0, 1.9, 0]) cube([25, 14, 5], center=true);
-	translate([0, 0, -1.0]) cube([35, 35, 4], center=true);
+// aligned to the cutout below
+module adafruit_pid_326_oled_ssd1306_mount() {
+	translate([12, 13.25, -2]) adafruit_pid_326_oled_ssd1306_mount_post();
+	translate([12, -13.25, -2]) adafruit_pid_326_oled_ssd1306_mount_post();
+	translate([-12, 13.25, -2]) adafruit_pid_326_oled_ssd1306_mount_post();
+	translate([-12, -13.25, -2]) adafruit_pid_326_oled_ssd1306_mount_post();
+}
+
+module adafruit_pid_326_oled_ssd1306_mount_cutout() {
+	translate([0, 3.5, 0]) cube([ssd1306_x, ssd1306_y, panel_z+0.1], center=true);
+	translate([0, 0, -ssd1306_z/2]) cube([adafruit_pid_326_oled_ssd1306_cutout_x,
+		adafruit_pid_326_oled_ssd1306_cutout_y, panel_z-ssd1306_z+0.1], center=true);
+	translate([0, 0, -ssd1306_z/2-2]) cube([adafruit_pid_326_oled_ssd1306_cutout_x*3/2,
+		adafruit_pid_326_oled_ssd1306_cutout_y/2, panel_z/2+0.1], center=true);
 }

 module m3_mount_post() {
@@ -502,6 +510,82 @@ module sega_2p_eleven() {
 	translate([sega_2p_column_5_offset, -19-9-11, 0]) sega_2p_p1();
 }

+// BSS ERGO - 30mm
+
+module wasd_30mm() {
+	button_30mm_hole();					// W
+	translate([0, -36, 0]) button_30mm_hole();		// S
+	translate([-34.5, -36-9, 0]) button_30mm_hole();	// A
+	translate([34.5, -36-9, 0]) button_30mm_hole();		// D
+}
+
+module wasd_six_30mm() {
+	wasd_30mm();
+	translate([-34.5, -9, 0]) button_30mm_hole();		// left of W
+	translate([34.5, -9, 0]) button_30mm_hole();		// right of W
+}
+
+module wasd_eight_30mm() {
+	wasd_six_30mm();
+	translate([34.5*1.9, -9*3, 0]) button_30mm_hole();	// top right of right of W
+	translate([34.5*1.9, -36-9*3, 0]) button_30mm_hole();	// right of D
+}
+
+module ergo_wasd_five_30mm() {
+	translate([-51.75, 65.5, 0]) rotate([0, 0, 10]) {
+		wasd_30mm();
+	}
+	translate([0, 0, 0]) sega_2p_nine_thumb_button();
+}
+
+module ergo_wasd_seven_30mm() {
+	translate([-51.75, 65.5, 0]) rotate([0, 0, 10]) {
+		wasd_six_30mm();
+	}
+	translate([0, 0, 0]) sega_2p_nine_thumb_button();
+}
+
+module ergo_nine_30mm() {
+	translate([-51.75, 65.5, 0]) rotate([0, 0, 10]) {
+		wasd_eight_30mm();
+	}
+	translate([0, 0, 0]) sega_2p_nine_thumb_button();
+}
+
+// BSS ERGO - 24mm
+module wasd_24mm() {
+	button_24mm_hole();					// W
+	translate([0, -27, 0]) button_24mm_hole();		// S
+	translate([-26, -27-7, 0]) button_24mm_hole();		// A
+	translate([26, -27-7, 0]) button_24mm_hole();		// D
+}
+
+module wasd_six_24mm() {
+	wasd_24mm();
+	translate([-26, -7, 0]) button_24mm_hole();		// left of W
+	translate([26, -7, 0]) button_24mm_hole();		// right of W
+}
+
+module wasd_eight_24mm() {
+	wasd_six_24mm();
+	translate([26*2-2, -7*3, 0]) button_24mm_hole();	// top right of right of W
+	translate([26*2-2, -27-7*3, 0]) button_24mm_hole();	// top right of right of W
+}
+
+module ergo_wasd_five_24mm() {
+	translate([-63.25, 65.5, 0]) rotate([0, 0, 10]) {
+		wasd_24mm();
+	}
+	translate([0, 0, 0]) sega_2p_nine_thumb_button();
+}
+
+module ergo_nine_24mm() {
+	translate([-63.25, 65.5, 0]) rotate([0, 0, 10]) {
+		wasd_eight_24mm();
+	}
+	translate([0, 0, 0]) sega_2p_nine_thumb_button();
+}
+
 module shiokenstar() {
 	translate([-172, 32, 0]) dir_arc_24mm_directionals();
 	sega_2p();
--- a/src/extras/bss-ae/decorative-plate-aux-control-tight-three-button-cluster.scad
+++ b/src/extras/bss-ae/decorative-plate-aux-control-tight-three-button-cluster.scad
@@ -10,11 +10,13 @@ include <components.scad>

 module aux_control_three_button_tight_cluster_decorative_plate() {
 	difference() {
-		// get a 2mm slice of the bigger button cylinders
-		translate([0, 0, -25]) hull() aux_control_three_button_tight_cluster();
-		// keep a thin slice
-		translate([0, 0, -100]) cube([500, 500, 198], center=true);
-		translate([0, 0, 100]) cube([500, 500, 198], center=true);
+		hull() difference() {
+			// get a 2mm slice of the decorative button cylinders
+			translate([0, 0, -50]) aux_control_three_button_tight_cluster();
+			// keep a thin slice
+			translate([0, 0, -100]) cube([500, 500, 198], center=true);
+			translate([0, 0, 100]) cube([500, 500, 198], center=true);
+		}
 		// cut out the normal holes
 		translate([0, 0, -1]) aux_control_three_button_tight_cluster();
 	}
--- a/src/extras/bss-ae/interconnect-x.scad
+++ b/src/extras/bss-ae/interconnect-x.scad
@@ -10,7 +10,7 @@ use <frames/pieces/front-or-back.scad>

 module interconnect_frame_half_piece() {
 	translate([0, frame_y/2-frame_wall, 0]) difference() {
-		front_or_back_frame_piece();
+		clean_edge_front_or_back_frame_piece();
 		translate([0, (-frame_y+frame_wall)/2-panel_overhang_amount, 0])
 			cube([overhang_panel_x, frame_wall+panel_overhang_amount*2, frame_z], center=true);
 	}
--- a/src/frames/pieces/front-or-back-aux-and-neutrik.scad
+++ b/src/frames/pieces/front-or-back-aux-and-neutrik.scad
@@ -9,7 +9,7 @@ use <front-or-back.scad>

 module front_or_back_aux_and_neutrik_frame_piece() {
 	difference() {
-		front_or_back_frame_piece();
+		clean_edge_front_or_back_frame_piece();

 		// aux button holes
 		translate([-35.25, -101.5, 0]) rotate([90, 0, 0]) aux_control_three_button_cluster();
--- a/src/frames/pieces/front-or-back-inner-wall.scad
+++ b/src/frames/pieces/front-or-back-inner-wall.scad
@@ -18,7 +18,7 @@ module mount_column_cutout() {
 module front_or_back_inner_wall_frame_base_piece() {
 	difference() {
 		// Z is scaled so that some part of the original part inner wall is retained
-		scale([1, 1, inner_frame_z_decorative_scale]) front_or_back_frame_piece();
+		scale([1, 1, inner_frame_z_decorative_scale]) clean_edge_front_or_back_frame_piece();
 		// minus the outer wall
 		translate([0, -(frame_y-frame_wall)/2, 0]) cube([frame_x, frame_wall, frame_z], center=true);
 		// minus half of the mounting posts (the other half provided by the outer wall)
--- a/src/frames/pieces/front-or-back-trapezoid.scad
+++ b/src/frames/pieces/front-or-back-trapezoid.scad
@@ -17,7 +17,7 @@ module clean_front_or_back() {

 module bottom_piece_wall() {
 	// get a slice of the piece (before the bevel), to use it in extruding
-	projection(cut=true) rotate([-90, 0, 0]) translate([0, frame_y/2-(frame_wall-frame_bevel_height)*3/2, 0])
+	projection(cut=true) rotate([-90, 0, 0]) translate([0, frame_y/2-frame_wall+0.01, 0])
 		clean_front_or_back();
 }

@@ -25,12 +25,12 @@ module bottom_piece_extension() {
 	// combine the original with a shrunken piece to "pull" the wall out
 	hull() {
 		linear_extrude(height=frame_extension_y) scale([1, 0.5, 1]) bottom_piece_wall();
-		linear_extrude(height=(frame_wall-frame_bevel_height)) bottom_piece_wall();
+		linear_extrude(height=frame_wall) bottom_piece_wall();
 	}
 }

 module front_or_back_trapezoid_frame_piece() {
-	clean_front_or_back();
+	clean_edge_front_or_back_frame_piece();
 	translate([0, -frame_y/2+frame_wall, 0]) rotate([90, 0, 0]) bottom_piece_extension();
 }

--- a/src/frames/pieces/front-or-back-windowed-backslashes.scad
+++ b/src/frames/pieces/front-or-back-windowed-backslashes.scad
@@ -21,7 +21,7 @@ module backslashes() {

 module backslashes_windowed_front_or_back_frame_piece() {
 	difference() {
-		front_or_back_frame_piece();
+		clean_edge_front_or_back_frame_piece();
 		// subtract slashes from the frame wall
 		backslashes();
 		// subtract the inner wall area that will be provided by the other piece
@@ -29,12 +29,4 @@ module backslashes_windowed_front_or_back_frame_piece() {
 	}
 }

-module backslashes_windowed_front_or_back_frame_piece_for_extended_side() {
-	difference() {
-		backslashes_windowed_front_or_back_frame_piece();
-		// ...minus the frame wall and lip on the left
-		translate([-frame_x/2+frame_wall/2, 0, 0]) cube([frame_wall, frame_y, frame_z], center=true);
-	}
-}
-
-backslashes_windowed_front_or_back_frame_piece_for_extended_side();
+backslashes_windowed_front_or_back_frame_piece();
--- a/src/frames/pieces/front-or-back-windowed-forwardslashes.scad
+++ b/src/frames/pieces/front-or-back-windowed-forwardslashes.scad
@@ -11,7 +11,7 @@ use <front-or-back-windowed-backslashes.scad>

 module forwardslashes_windowed_front_or_back_frame_piece() {
 	difference() {
-		front_or_back_frame_piece();
+		clean_edge_front_or_back_frame_piece();
 		// subtract slashes from the frame wall
 		mirror([0, 0, 1]) backslashes();
 		// subtract the inner wall area that will be provided by the other piece
@@ -19,12 +19,4 @@ module forwardslashes_windowed_front_or_back_frame_piece() {
 	}
 }

-module forwardslashes_windowed_front_or_back_frame_piece_for_extended_side() {
-	difference() {
-		forwardslashes_windowed_front_or_back_frame_piece();
-		// ...minus the frame wall and lip on the left
-		translate([-frame_x/2+frame_wall/2, 0, 0]) cube([frame_wall, frame_y, frame_z], center=true);
-	}
-}
-
-forwardslashes_windowed_front_or_back_frame_piece_for_extended_side();
+forwardslashes_windowed_front_or_back_frame_piece();
--- a/src/frames/pieces/front-or-back-windowed-horiz-stripes.scad
+++ b/src/frames/pieces/front-or-back-windowed-horiz-stripes.scad
@@ -22,7 +22,7 @@ module front_horiz_stripes() {

 module horiz_striped_windowed_front_or_back_frame_piece() {
 	difference() {
-		front_or_back_frame_piece();
+		clean_edge_front_or_back_frame_piece();
 		// subtract frame wall windows
 		front_horiz_stripes();
 		// subtract the inner wall area that will be provided by the other piece
--- a/src/frames/pieces/front-or-back-windowed.scad
+++ b/src/frames/pieces/front-or-back-windowed.scad
@@ -16,7 +16,7 @@ module front_or_back_window() {

 module windowed_front_or_back_frame_piece() {
 	difference() {
-		front_or_back_frame_piece();
+		clean_edge_front_or_back_frame_piece();
 		// subtract frame wall window
 		front_or_back_window();
 		// subtract the inner wall area that will be provided by the other piece
--- a/src/frames/pieces/front-or-back.scad
+++ b/src/frames/pieces/front-or-back.scad
@@ -8,8 +8,8 @@ include <components.scad>
 use <frames/complete/left-frame.scad>
 use <side.scad>

+piece_width = panel_support_width+frame_wall+frame_mount_column_width;
 module front_or_back_frame_piece() {
-	piece_width = panel_support_width+frame_wall+frame_mount_column_width;
 	intersection() {
 		left_frame();
 		difference() {
@@ -22,4 +22,21 @@ module front_or_back_frame_piece() {
 	}
 }

-front_or_back_frame_piece();
+// there's something with the print quality/slicing where a couple layers
+// around the hex hole get fat in the walls, making this not flush with a
+// sibling piece. this removal makes it so the pieces don't touch
+// HOWEVER, the side piece uses front_or_back_frame_piece() as a difference,
+// so if we removed the little chop from that piece, it'd make the
+// side_frame_piece() bigger, defeating the purpose, so what we'll actually
+// print is this one and there'll be a little gap in between as desired
+//
+// front/back pieces that build on this shape should inherit from clean_edge_
+module clean_edge_front_or_back_frame_piece() {
+	difference() {
+		front_or_back_frame_piece();
+		translate([panel_x/2, -(panel_y/2-15), 0]) cube([5, 30, inner_frame_z*2], center=true);
+		translate([-panel_x/2, -(panel_y/2-15), 0]) cube([5, 30, inner_frame_z*2], center=true);
+	}
+}
+
+clean_edge_front_or_back_frame_piece();
--- a/src/frames/pieces/side-trapezoid-extended-to-front-trapezoid.scad
+++ b/src/frames/pieces/side-trapezoid-extended-to-front-trapezoid.scad
@@ -11,18 +11,15 @@ use <front-or-back-trapezoid.scad>

 module side_and_bottom_frame_piece_wall() {
 	// get a slice of the pieces, to use it in extruding
-	// this doesn't use the side_frame_piece because of the 45 degree angle geometry
-	// not creating a clean thing to cut, so we just take the whole wall and use that
-	projection(cut=true) rotate([0, 90, 0]) translate([frame_x/2-frame_wall-(frame_bevel_height/2), 0, 0])
-		left_frame();
-	projection(cut=true) translate([0, -frame_y/2+frame_wall, 0]) rotate([90, 90, 0]) bottom_piece_extension();
+	projection(cut=true) rotate([0, 90, 0]) translate([frame_x/2-frame_wall+0.01, 0, 0]) side_frame_piece();
+	projection(cut=true) translate([0, -frame_y/2+frame_wall+0.01, 0]) rotate([90, 90, 0]) bottom_piece_extension();
 }

 module side_and_bottom_frame_piece_extension() {
 	// combine the original with a shrunken piece to "pull" the wall out
 	hull() {
 		linear_extrude(height=frame_extension_y) scale([0.5, 0.90, 1]) side_and_bottom_frame_piece_wall();
-		linear_extrude(height=frame_bevel_height) side_and_bottom_frame_piece_wall();
+		linear_extrude(height=frame_wall) side_and_bottom_frame_piece_wall();
 	}
 }

@@ -32,7 +29,7 @@ module side_trapezoid_extended_to_front_frame_piece() {
 		// chop off the old edge which is getting replaced with the extension
 		translate([-frame_x/2+frame_bevel_height/2, 0, 0]) cube([frame_bevel_height, frame_y, frame_z], center=true);
 	}
-	translate([-frame_x/2+frame_bevel_height*2, 0, 0]) rotate([0, -90, 0]) side_and_bottom_frame_piece_extension();
+	translate([-frame_x/2+frame_wall, 0, 0]) rotate([0, -90, 0]) side_and_bottom_frame_piece_extension();
 }

 side_trapezoid_extended_to_front_frame_piece();
--- a/src/frames/pieces/side-trapezoid.scad
+++ b/src/frames/pieces/side-trapezoid.scad
@@ -10,17 +10,14 @@ use <side.scad>

 module side_frame_piece_wall() {
 	// get a slice of the piece, to use it in extruding
-	// this doesn't use the side_frame_piece because of the 45 degree angle geometry
-	// not creating a clean thing to cut, so we just take the whole wall and use that
-	projection(cut=true) rotate([0, 90, 0]) translate([frame_x/2-frame_wall-(frame_bevel_height/2), 0, 0])
-		left_frame();
+	projection(cut=true) rotate([0, 90, 0]) translate([frame_x/2-frame_wall+0.01, 0, 0]) side_frame_piece();
 }

 module side_frame_piece_extension() {
 	// combine the original with a shrunken piece to "pull" the wall out
 	hull() {
 		linear_extrude(height=frame_extension_y) scale([0.5, 0.85, 1]) side_frame_piece_wall();
-		linear_extrude(height=frame_bevel_height) side_frame_piece_wall();
+		linear_extrude(height=frame_wall) side_frame_piece_wall();
 	}
 }

@@ -30,7 +27,7 @@ module side_trapezoid_frame_piece() {
 		// chop off the old edge which is getting replaced with the extension
 		translate([-frame_x/2+frame_bevel_height/2, 0, 0]) cube([frame_bevel_height, frame_y, frame_z], center=true);
 	}
-	translate([-frame_x/2+frame_bevel_height*2, 0, 0]) rotate([0, -90, 0]) side_frame_piece_extension();
+	translate([-frame_x/2+frame_wall, 0, 0]) rotate([0, -90, 0]) side_frame_piece_extension();
 }

 side_trapezoid_frame_piece();
--- a/src/misc/m4-hex-spacer-sleeve.scad
+++ b/src/misc/m4-hex-spacer-sleeve.scad
@@ -0,0 +1,24 @@
+/* Wrap a smaller width hex spacer with plastic to get it to fit in our standard post hole.
+ *
+ * Since the hex spacers can vary in width, you may have to adjust the inner dimensions
+ * to make this work right for your piece, but this worked right for mine. YMMV.
+ *
+ * SPDX-FileCopyrightText: © 2025 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+include <parameters.scad>
+include <components.scad>
+
+module small_m4_hole() {
+	scale([1, 1, 2]) cylinder(r=3.25, h=frame_z, $fn=6, center=true);
+}
+
+module m4_hex_spacer_sleeve() {
+	difference() {
+		resize([0, 0, 45]) frame_hex_bolt_hole();
+		small_m4_hole();
+	}
+}
+
+
+m4_hex_spacer_sleeve();
--- a/src/panels/inset/ergo-nine-plus-aux-button-with-mount.scad
+++ b/src/panels/inset/ergo-nine-plus-aux-button-with-mount.scad
@@ -0,0 +1,15 @@
+/*
+ * SPDX-FileCopyrightText: © 2025 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <ergo-nine-plus-aux-button.scad>
+
+module ergo_nine_plus_aux_button_panel_with_mount() {
+	ergo_nine_plus_aux_button_panel();
+	translate([20, -50, -(panel_z/2) - 3]) pcb_mount();
+}
+
+ergo_nine_plus_aux_button_panel_with_mount();
--- a/src/panels/inset/ergo-nine-plus-aux-button.scad
+++ b/src/panels/inset/ergo-nine-plus-aux-button.scad
@@ -0,0 +1,17 @@
+/*
+ * SPDX-FileCopyrightText: © 2025 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+
+module ergo_nine_plus_aux_button_panel() {
+	difference() {
+		panel();
+		ergo_nine_30mm();
+		translate([89, 30, 0]) button_24mm_hole();
+	}
+}
+
+ergo_nine_plus_aux_button_panel();
--- a/src/panels/inset/lever-and-dir_arc-plus-w-30mm-panel-with-oled.scad
+++ b/src/panels/inset/lever-and-dir_arc-plus-w-30mm-panel-with-oled.scad
@@ -0,0 +1,18 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <lever-and-dir_arc-plus-w-30mm-panel.scad>
+
+module lever_and_dir_arc_w_30mm_panel_with_oled() {
+	difference() {
+		lever_and_dir_arc_w_30mm_panel();
+		translate([0, -(panel_y/2 - 22), 0]) adafruit_pid_326_oled_ssd1306_mount_cutout();
+	}
+	translate([0, -(panel_y/2 - 22), 0]) adafruit_pid_326_oled_ssd1306_mount();
+}
+
+lever_and_dir_arc_w_30mm_panel_with_oled();
--- a/src/panels/inset/lever-and-ergo-wasd-five-panel-with-oled.scad
+++ b/src/panels/inset/lever-and-ergo-wasd-five-panel-with-oled.scad
@@ -0,0 +1,18 @@
+/*
+ * SPDX-FileCopyrightText: © 2025 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <lever-and-ergo-wasd-five-panel.scad>
+
+module lever_and_ergo_wasd_five_panel_with_oled() {
+	difference() {
+		lever_and_ergo_wasd_five_panel();
+		translate([0, -(panel_y/2 - 22), 0]) adafruit_pid_326_oled_ssd1306_mount_cutout();
+	}
+	translate([0, -(panel_y/2 - 22), 0]) adafruit_pid_326_oled_ssd1306_mount();
+}
+
+lever_and_ergo_wasd_five_panel_with_oled();
--- a/src/panels/inset/lever-and-ergo-wasd-five-panel.scad
+++ b/src/panels/inset/lever-and-ergo-wasd-five-panel.scad
@@ -0,0 +1,18 @@
+/*
+ * SPDX-FileCopyrightText: © 2025 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+
+module lever_and_ergo_wasd_five_panel() {
+	difference() {
+		panel();
+		mirror([1, 0, 0]) ergo_wasd_five_30mm();
+		translate([(-panel_x/2)+55, (panel_y/2)-75, 0]) levermountholes();
+		translate([(-panel_x/2)+55, (panel_y/2)-75, 0]) levermountcountersinks();
+	}
+}
+
+lever_and_ergo_wasd_five_panel();
--- a/src/panels/inset/sega-2p-eleven-panel-with-mount.scad
+++ b/src/panels/inset/sega-2p-eleven-panel-with-mount.scad
@@ -10,7 +10,7 @@ use <sega-2p-eleven-panel.scad>

 module sega_2p_eleven_panel_with_mount() {
 	sega_2p_eleven_panel();
-	translate([30, -50, -(panel_z/2) - 3]) pcb_mount();
+	translate([20, -50, -(panel_z/2) - 3]) pcb_mount();
 }

 sega_2p_eleven_panel_with_mount();
--- a/src/panels/inset/sega-2p-nine-plus-aux-button-with-mount.scad
+++ b/src/panels/inset/sega-2p-nine-plus-aux-button-with-mount.scad
@@ -0,0 +1,15 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <sega-2p-nine-plus-aux-button.scad>
+
+module sega_2p_nine_plus_aux_button_with_mount() {
+	sega_2p_nine_plus_aux_button();
+	translate([20, -50, -(panel_z/2) - 3]) pcb_mount();
+}
+
+sega_2p_nine_plus_aux_button_with_mount();
--- a/src/panels/inset/sega-2p-nine-plus-control-panel.scad
+++ b/src/panels/inset/sega-2p-nine-plus-control-panel.scad
@@ -6,7 +6,7 @@
 include <parameters.scad>
 include <components.scad>

-module sega_2p_nine_plus_control_panel() {
+module sega_2p_nine_plus_aux_button() {
 	difference() {
 		panel();
 		sega_2p_nine();
@@ -14,4 +14,4 @@ module sega_2p_nine_plus_control_panel() {
 	}
 }

-sega_2p_nine_plus_control_panel();
+sega_2p_nine_plus_aux_button();
--- a/src/panels/inset/sega-2p-nine-plus-control-panel-with-mount.scad
+++ b/src/panels/inset/sega-2p-nine-plus-control-panel-with-mount.scad
@@ -1,15 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <sega-2p-nine-plus-control-panel.scad>
-
-module sega_2p_nine_plus_control_panel_with_mount() {
-	sega_2p_nine_plus_control_panel();
-	translate([30, -50, -(panel_z/2) - 3]) pcb_mount();
-}
-
-sega_2p_nine_plus_control_panel_with_mount();
--- a/src/panels/overhang/right-sega-2p-nine-control-panel-with-mount-with-oled.scad
+++ b/src/panels/overhang/right-sega-2p-nine-control-panel-with-mount-with-oled.scad
@@ -1,18 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <right-sega-2p-nine-plus-control-panel-with-mount.scad>
-
-module sega_2p_nine_plus_control_right_overhang_panel_with_mount_with_oled() {
-	difference() {
-		sega_2p_nine_plus_control_right_overhang_panel_with_mount();
-		translate([75, 77.5, 0]) oled_ssd1306_mount_cutout();
-	}
-	translate([75, 77.5, 0.5]) oled_ssd1306_mount();
-}
-
-sega_2p_nine_plus_control_right_overhang_panel_with_mount_with_oled();
--- a/src/panels/overhang/right-sega-2p-nine-panel-with-mount.scad
+++ b/src/panels/overhang/right-sega-2p-nine-panel-with-mount.scad
@@ -9,7 +9,7 @@ use <right-sega-2p-nine-panel.scad>

 module sega_2p_nine_with_mount_right_overhang_panel() {
 	sega_2p_nine_right_overhang_panel();
-	translate([30, -50, -(panel_z/2) - 3]) pcb_mount();
+	translate([20, -50, -(panel_z/2) - 3]) pcb_mount();
 }

 sega_2p_nine_with_mount_right_overhang_panel();
--- a/src/panels/overhang/right-sega-2p-nine-plus-aux-button-with-mount.scad
+++ b/src/panels/overhang/right-sega-2p-nine-plus-aux-button-with-mount.scad
@@ -0,0 +1,15 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <right-sega-2p-nine-plus-aux-button.scad>
+
+module sega_2p_nine_plus_aux_button_right_overhang_panel_with_mount() {
+	sega_2p_nine_plus_aux_button_right_overhang_panel();
+	translate([20, -50, -(panel_z/2) - 3]) pcb_mount();
+}
+
+sega_2p_nine_plus_aux_button_right_overhang_panel_with_mount();
--- a/src/panels/overhang/right-sega-2p-nine-plus-control-panel.scad
+++ b/src/panels/overhang/right-sega-2p-nine-plus-control-panel.scad
@@ -6,7 +6,7 @@
 include <parameters.scad>
 include <components.scad>

-module sega_2p_nine_plus_control_right_overhang_panel() {
+module sega_2p_nine_plus_aux_button_right_overhang_panel() {
 	difference() {
 		panel_with_raised_overhang();
 		sega_2p_nine();
@@ -15,4 +15,4 @@ module sega_2p_nine_plus_control_right_overhang_panel() {
 	}
 }

-sega_2p_nine_plus_control_right_overhang_panel();
+sega_2p_nine_plus_aux_button_right_overhang_panel();
--- a/src/panels/overhang/right-sega-2p-nine-plus-control-panel-with-mount.scad
+++ b/src/panels/overhang/right-sega-2p-nine-plus-control-panel-with-mount.scad
@@ -1,15 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <right-sega-2p-nine-plus-control-panel.scad>
-
-module sega_2p_nine_plus_control_right_overhang_panel_with_mount() {
-	sega_2p_nine_plus_control_right_overhang_panel();
-	translate([30, -50, -(panel_z/2) - 3]) pcb_mount();
-}
-
-sega_2p_nine_plus_control_right_overhang_panel_with_mount();
--- a/src/parameters.scad
+++ b/src/parameters.scad
@@ -74,7 +74,7 @@ frame_extension_y = 25;

 // this sinks the bottom and top of the frame inward a bit, and is used to math out two shapes
 // when creating the frame box / overhang panel
-frame_bevel_height = 2;
+frame_bevel_height = 1.25;
 overhang_panel_bevel_height = 1;

 frame_center_to_neutrik = 70;
@@ -134,6 +134,13 @@ stand_x = 5;
 stand_y = frame_z;
 stand_z = 15;

+// oled cutout stuff
+ssd1306_x = 23;
+ssd1306_y = 12;
+ssd1306_z = 1;
+adafruit_pid_326_oled_ssd1306_cutout_x = 30;
+adafruit_pid_326_oled_ssd1306_cutout_y = 32;
+

 // LAYOUTS

--- a/src/plates/decorative-plate-24mm-button.scad
+++ b/src/plates/decorative-plate-24mm-button.scad
@@ -9,8 +9,8 @@ include <components.scad>

 module button_24mm_decorative_plate() {
 	difference() {
-		// get a 2mm slice of the bigger button cylinders
-		translate([0, 0, -55]) button_24mm_hole();
+		// get a 2mm slice of the decorative button cylinders
+		translate([0, 0, -50]) button_24mm_hole();
 		translate([0, 0, -100]) cube([500, 500, 198], center=true);
 		translate([0, 0, 100]) cube([500, 500, 198], center=true);
 		// cut out the normal holes
--- a/src/plates/decorative-plate-aux-connectors-neutrik-and-rocker-cluster.scad
+++ b/src/plates/decorative-plate-aux-connectors-neutrik-and-rocker-cluster.scad
--- a/src/plates/decorative-plate-aux-control-three-button-cluster.scad
+++ b/src/plates/decorative-plate-aux-control-three-button-cluster.scad
--- a/src/plates/decorative-plate-dir_arc-plus-w-24mm-8-button.scad
+++ b/src/plates/decorative-plate-dir_arc-plus-w-24mm-8-button.scad
@@ -8,8 +8,8 @@ include <components.scad>

 module dir_arc_plus_w_24mm_8_button_decorative_plate() {
 	difference() {
-		// get a 2mm slice of the bigger button cylinders
-		translate([0, 0, -55]) dir_arc_plus_w_24mm_8_button();
+		// get a 2mm slice of the decorative button cylinders
+		translate([0, 0, -50]) dir_arc_plus_w_24mm_8_button();
 		translate([0, 0, -100]) cube([500, 500, 198], center=true);
 		translate([0, 0, 100]) cube([500, 500, 198], center=true);
 		// cut out the normal holes
--- a/src/plates/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-nine-rectangles.scad
+++ b/src/plates/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-nine-rectangles.scad
--- a/src/plates/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-nine-superplate.scad
+++ b/src/plates/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-nine-superplate.scad
@@ -12,7 +12,7 @@ module dir_arc_plus_w_30mm_and_sega_2p_nine_decorative_superplate() {
 	difference() {
 		union() {
 			hull() difference() {
-				// get a 2mm slice of the bigger button cylinders
+				// get a 2mm slice of the decorative button cylinders
 				union() {
 					translate([-panel_x/2, 0, -50]) dir_arc_w_30mm();
 					translate([panel_x/2, 0, -50]) sega_2p_nine();
--- a/src/plates/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-nine.scad
+++ b/src/plates/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-nine.scad
@@ -8,10 +8,10 @@ include <components.scad>

 module dir_arc_plus_w_30mm_and_sega_2p_nine_decorative_plate() {
 	difference() {
-		// get a 2mm slice of the bigger button cylinders
+		// get a 2mm slice of the jumbo decorative button cylinders
 		union() {
-			translate([-panel_x/2, 0, -65]) dir_arc_w_30mm();
-			translate([panel_x/2, 0, -65]) sega_2p_nine();
+			translate([-panel_x/2, 0, -70]) dir_arc_w_30mm();
+			translate([panel_x/2, 0, -70]) sega_2p_nine();
 		}
 		translate([0, 0, -100]) cube([500, 500, 198], center=true);
 		translate([0, 0, 100]) cube([500, 500, 198], center=true);
--- a/src/plates/decorative-plate-dir_arc-plus-w-30mm-plate.scad
+++ b/src/plates/decorative-plate-dir_arc-plus-w-30mm-plate.scad
@@ -10,10 +10,12 @@ include <components.scad>

 module dir_arc_plus_w_30mm_plate_decorative_plate() {
 	difference() {
-		// get a 2mm slice of the bigger button cylinders
-		translate([-panel_x/2, 0, -25]) hull() dir_arc_w_30mm();
-		translate([0, 0, -100]) cube([500, 500, 198], center=true);
-		translate([0, 0, 100]) cube([500, 500, 198], center=true);
+		hull() difference() {
+			// get a 2mm slice of the decorative button cylinders
+			translate([-panel_x/2, 0, -50]) dir_arc_w_30mm();
+			translate([0, 0, -100]) cube([500, 500, 198], center=true);
+			translate([0, 0, 100]) cube([500, 500, 198], center=true);
+		}
 		// cut out the normal holes
 		translate([-panel_x/2, 0, -1]) dir_arc_w_30mm();
 	}
--- a/src/plates/decorative-plate-dir_arc-plus-w-30mm.scad
+++ b/src/plates/decorative-plate-dir_arc-plus-w-30mm.scad
@@ -8,8 +8,8 @@ include <components.scad>

 module dir_arc_plus_w_30mm_decorative_plate() {
 	difference() {
-		// get a 2mm slice of the bigger button cylinders
-		translate([0, 0, -55]) dir_arc_w_30mm();
+		// get a 2mm slice of the decorative button cylinders
+		translate([0, 0, -50]) dir_arc_w_30mm();
 		translate([0, 0, -100]) cube([500, 500, 198], center=true);
 		translate([0, 0, 100]) cube([500, 500, 198], center=true);
 		// cut out the normal holes
--- a/src/plates/decorative-plate-ergo-nine-30mm-plate.scad
+++ b/src/plates/decorative-plate-ergo-nine-30mm-plate.scad
@@ -0,0 +1,24 @@
+/* Decorative plate for ergo action buttons.
+ *
+ * SPDX-FileCopyrightText: © 2025 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+decorative_radius_scale = 1.5;
+include <components.scad>
+
+module ergo_nine_30mm_plate_decorative_plate() {
+	difference() {
+		hull() difference() {
+			// get a 2mm slice of the decorative button cylinders
+			translate([0, 0, -50]) ergo_nine_30mm();
+			translate([0, 0, -100]) cube([500, 500, 198], center=true);
+			translate([0, 0, 100]) cube([500, 500, 198], center=true);
+		}
+		// cut out the normal holes
+		translate([0, 0, -1]) ergo_nine_30mm();
+	}
+}
+
+ergo_nine_30mm_plate_decorative_plate();
--- a/src/plates/decorative-plate-ergo-wasd-five-30mm-and-ergo-nine-30mm.scad
+++ b/src/plates/decorative-plate-ergo-wasd-five-30mm-and-ergo-nine-30mm.scad
@@ -0,0 +1,24 @@
+/*
+ * SPDX-FileCopyrightText: © 2025 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+
+module ergo_wasd_five_30mm_and_ergo_nine_30mm_decorative_plate() {
+	difference() {
+		// get a 2mm slice of the jumbo decorative button cylinders
+		union() {
+			translate([-panel_x/2, 0, -70]) mirror([1, 0, 0]) ergo_wasd_five_30mm();
+			translate([panel_x/2, 0, -70]) ergo_nine_30mm();
+		}
+		translate([0, 0, -100]) cube([500, 500, 198], center=true);
+		translate([0, 0, 100]) cube([500, 500, 198], center=true);
+		// cut out the normal holes
+		translate([-panel_x/2, 0, -1]) mirror([1, 0, 0]) ergo_wasd_five_30mm();
+		translate([panel_x/2, 0, -1]) ergo_nine_30mm();
+	}
+}
+
+ergo_wasd_five_30mm_and_ergo_nine_30mm_decorative_plate();
--- a/src/plates/decorative-plate-ergo-wasd-five-30mm-plate.scad
+++ b/src/plates/decorative-plate-ergo-wasd-five-30mm-plate.scad
@@ -0,0 +1,24 @@
+/* Decorative plate for ergo WASD directional buttons.
+ *
+ * SPDX-FileCopyrightText: © 2025 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+decorative_radius_scale = 1.5;
+include <components.scad>
+
+module ergo_wasd_five_30mm_plate_decorative_plate() {
+	difference() {
+		hull() difference() {
+			// get a 2mm slice of the decorative button cylinders
+			translate([0, 0, -50]) ergo_wasd_seven_30mm();
+			translate([0, 0, -100]) cube([500, 500, 198], center=true);
+			translate([0, 0, 100]) cube([500, 500, 198], center=true);
+		}
+		// cut out the normal holes
+		translate([0, 0, -1]) ergo_wasd_five_30mm();
+	}
+}
+
+ergo_wasd_five_30mm_plate_decorative_plate();
--- a/src/plates/decorative-plate-sega-2p-6-button.scad
+++ b/src/plates/decorative-plate-sega-2p-6-button.scad
@@ -8,8 +8,8 @@ include <components.scad>

 module sega_2p_6_button_decorative_plate() {
 	difference() {
-		// get a 2mm slice of the bigger button cylinders
-		translate([0, 0, -55]) sega_2p_6_button();
+		// get a 2mm slice of the decorative button cylinders
+		translate([0, 0, -50]) sega_2p_6_button();
 		translate([0, 0, -100]) cube([500, 500, 198], center=true);
 		translate([0, 0, 100]) cube([500, 500, 198], center=true);
 		// cut out the normal holes
--- a/src/plates/decorative-plate-sega-2p-eleven-plate.scad
+++ b/src/plates/decorative-plate-sega-2p-eleven-plate.scad
@@ -10,10 +10,12 @@ include <components.scad>

 module sega_2p_eleven_plate_decorative_plate() {
 	difference() {
-		// get a 2mm slice of the bigger button cylinders
-		translate([panel_x/2, 0, -25]) hull() sega_2p_eleven();
-		translate([0, 0, -100]) cube([500, 500, 198], center=true);
-		translate([0, 0, 100]) cube([500, 500, 198], center=true);
+		hull() difference() {
+			// get a 2mm slice of the decorative button cylinders
+			translate([panel_x/2, 0, -50]) sega_2p_eleven();
+			translate([0, 0, -100]) cube([500, 500, 198], center=true);
+			translate([0, 0, 100]) cube([500, 500, 198], center=true);
+		}
 		// cut out the normal holes
 		translate([panel_x/2, 0, -1]) sega_2p_eleven();
 	}
--- a/src/plates/decorative-plate-sega-2p-nine-plate.scad
+++ b/src/plates/decorative-plate-sega-2p-nine-plate.scad
@@ -8,17 +8,17 @@ include <parameters.scad>
 decorative_radius_scale = 1.5;
 include <components.scad>

-module sega_2p_nine_decorative_plate_of_plates() {
+module sega_2p_nine_decorative_plate() {
 	difference() {
-		// get a 2mm slice of the bigger button cylinders
-		union() {
-			translate([panel_x/2, 0, -25]) hull() sega_2p_nine();
+		hull() difference() {
+			// get a 2mm slice of the decorative button cylinders
+			translate([panel_x/2, 0, -50]) sega_2p_nine();
+			translate([0, 0, -100]) cube([500, 500, 198], center=true);
+			translate([0, 0, 100]) cube([500, 500, 198], center=true);
 		}
-		translate([0, 0, -100]) cube([500, 500, 198], center=true);
-		translate([0, 0, 100]) cube([500, 500, 198], center=true);
 		// cut out the normal holes
 		translate([panel_x/2, 0, -1]) sega_2p_nine();
 	}
 }

-sega_2p_nine_decorative_plate_of_plates();
+sega_2p_nine_decorative_plate();
--- a/src/plates/decorative-plate-sega-2p-nine.scad
+++ b/src/plates/decorative-plate-sega-2p-nine.scad
@@ -8,8 +8,8 @@ include <components.scad>

 module sega_2p_nine_decorative_plate() {
 	difference() {
-		// get a 2mm slice of the bigger button cylinders
-		translate([0, 0, -55]) sega_2p_nine();
+		// get a 2mm slice of the decorative button cylinders
+		translate([0, 0, -50]) sega_2p_nine();
 		translate([0, 0, -100]) cube([500, 500, 198], center=true);
 		translate([0, 0, 100]) cube([500, 500, 198], center=true);
 		// cut out the normal holes
--- a/src/plates/decorative-plate-sega-2p.scad
+++ b/src/plates/decorative-plate-sega-2p.scad
@@ -9,8 +9,8 @@ include <components.scad>

 module sega_2p_decorative_plate() {
 	difference() {
-		// get a 2mm slice of the bigger button cylinders
-		translate([0, 0, -55]) sega_2p();
+		// get a 2mm slice of the decorative button cylinders
+		translate([0, 0, -50]) sega_2p();
 		translate([0, 0, -100]) cube([500, 500, 198], center=true);
 		translate([0, 0, 100]) cube([500, 500, 198], center=true);
 		// cut out the normal holes
--- a/src/plates/dustwasher-jlf.scad
+++ b/src/plates/dustwasher-jlf.scad
--- a/src/plates/dustwasher-lsx-nobi.scad
+++ b/src/plates/dustwasher-lsx-nobi.scad
--- a/src/plates/lever-mount-sanwa-seimitsu.scad
+++ b/src/plates/lever-mount-sanwa-seimitsu.scad
--- a/src/plates/neutrik-d-plate-24mm-hole.scad
+++ b/src/plates/neutrik-d-plate-24mm-hole.scad
--- a/src/plates/neutrik-d-plate.scad
+++ b/src/plates/neutrik-d-plate.scad
--- a/src/plates/rocker-20mm-plate.scad
+++ b/src/plates/rocker-20mm-plate.scad
Author	SHA1	Message	Date
Brian S. Stephan	0fd3880fa2	make the 24mm ergo variant quasi-official I tested it and managed to cram it all onto one panel, and the dimensions seem cromulent, so I'm going to call it supported, even if it remains unused	2026-02-09 07:49:02 -06:00
Brian S. Stephan	d028736d5a	correct label for example photo	2026-02-09 07:44:36 -06:00
Brian S. Stephan	80ce81c465	use a smaller frame bevel in order to improve print quality the bevel was big and looked nice, but the number of layers might have been contributing to reduced print quality and increased pull on the corners of the pieces printed face down (so bevels going out as layers go up). this reduces the size of the bevel in an attempt to make the problem less pronounced. hopefully. there was also a bunch of weird math in the trapezoid frame pieces that relied on the bevel size in broken ways, so the pieces have been simplified a little bit to work right and not be affected by that otherwise unrelated parameter. Signed-off-by: Brian S. Stephan <bss@incorporeal.org>	2026-01-06 16:38:24 -06:00
Brian S. Stephan	8b5d994847	cut some volume off of the front or back pieces where they touch sides there is a printing issue where a fat couple layers jut out a bit on the edge where the front or back piece would touch a side piece or another front or back piece, making them not connect that flushly. this removes a bit in order to let that fat layer be in a gap instead Signed-off-by: Brian S. Stephan <bss@incorporeal.org>	2026-01-03 22:18:48 -06:00
Brian S. Stephan	852cef821c	make "plate" decorative plates for ergo nine and ergo wasd 5 note that the ergo WASD 5 actually includes unused space as if it was 7 buttons, to have the inside edge be symmetrical with the ergo nine. it looked weird for the angle to cut in on one but not the other, when lined up next to each other Signed-off-by: Brian S. Stephan <bss@incorporeal.org>	2026-01-03 22:15:48 -06:00
Brian S. Stephan	bf2f8a8a17	fixing object names; these pieces are not for extended sides the object that made them "for" extended sides actually didn't do anything, either, so they've been removed Signed-off-by: Brian S. Stephan <bss@incorporeal.org>	2026-01-03 22:12:08 -06:00
Brian S. Stephan	1aea9221ff	rename some of the components for the ergo layouts I'm already regretting some of my naming choices but not enough to do anything about it right now Signed-off-by: Brian S. Stephan <bss@incorporeal.org>	2025-09-06 08:51:36 -05:00
Brian S. Stephan	ea4beca89d	move my many, many decorative plates and similar to their own dir finally making a plates/ instead of stuffing everything in misc/ Signed-off-by: Brian S. Stephan <bss@incorporeal.org>	2025-09-06 08:12:02 -05:00
Brian S. Stephan	aa92e57fe0	scoot the PCB mount a bit away from the inner wall this is mostly to accommodate some slightly longer dongles Signed-off-by: Brian S. Stephan <bss@incorporeal.org>	2025-09-05 15:13:49 -05:00
Brian S. Stephan	0d121e834a	update the demos I use to use the ergo layout Signed-off-by: Brian S. Stephan <bss@incorporeal.org>	2025-09-05 15:13:49 -05:00
Brian S. Stephan	d187312cd3	create new "ergo" layout based on a 30mm WASD layout for both left and right hands, these layouts have a WASD layout as a base, with the left and right sides pulled slightly down from the center, and with 8+ button layouts pulling down even further to match the arg for the pinky finger locations. I've been playing with this for a while, and think I like it, at least like it enough to commit it Signed-off-by: Brian S. Stephan <bss@incorporeal.org>	2025-09-05 15:13:44 -05:00
Brian S. Stephan	4c045951c7	fix some trivial markdown issues Signed-off-by: Brian S. Stephan <bss@incorporeal.org>	2025-06-20 08:20:40 -05:00
Brian S. Stephan	bcf2adcaa2	add a short FAQ to answer a question on IRC and maybe more questions in the future Signed-off-by: Brian S. Stephan <bss@incorporeal.org>	2025-06-20 08:11:34 -05:00
Brian S. Stephan	5e25a27d58	add a simple sleeve for a hex spacer that isn't wide enough I got a bag of spacers that are not as wide as what I normally use, so they rattle around in the post hole and obviously don't help with the fit of the completed stick. this sleeve seems to be right for them to fill the hole. provided in case it is useful in the future, for myself or anyone else Signed-off-by: Brian S. Stephan <bss@incorporeal.org>	2025-06-08 10:06:58 -05:00
Brian S. Stephan	462b4d45e0	some fixes and updates to the extended demo Signed-off-by: Brian S. Stephan <bss@incorporeal.org>	2025-06-01 09:35:40 -05:00
Brian S. Stephan	b0e5082064	remove the decorative corners, I don't use them Signed-off-by: Brian S. Stephan <bss@incorporeal.org>	2025-05-31 20:58:22 -05:00
Brian S. Stephan	6df2d7a84f	remove test components that were commented out while testing Signed-off-by: Brian S. Stephan <bss@incorporeal.org>	2025-05-30 16:12:41 -05:00
Brian S. Stephan	ef32076d98	rename some "control-panel" panels that are just one aux button appropriately Signed-off-by: Brian S. Stephan <bss@incorporeal.org>	2025-05-30 14:32:01 -05:00
Brian S. Stephan	d9d1183488	remove old unsupported OLED mount/cutout/panel the mount/cutout wasn't in a sensible place in the only panel it appeared in for a while, so removing it for now until/unless there's a reason to do it better, but in all likelihood, I'll just keep reusing the adafruit one Signed-off-by: Brian S. Stephan <bss@incorporeal.org>	2025-05-28 17:01:09 -05:00
Brian S. Stephan	fe8826d86f	rework the OLED mount and add it to a new panel Signed-off-by: Brian S. Stephan <bss@incorporeal.org>	2025-05-28 17:01:04 -05:00
Brian S. Stephan	8b96f60f37	add more color options to the demo Signed-off-by: Brian S. Stephan <bss@incorporeal.org>	2025-05-28 17:00:59 -05:00
Brian S. Stephan	5675921875	changelog for v4.7.1 Signed-off-by: Brian S. Stephan <bss@incorporeal.org>	2025-03-28 08:27:02 -05:00
Brian S. Stephan	d70ccf6491	fix an issue with decorative plate sizing I was taking a hull of the whole button negative shape in many places, rather than a hull of the sliced shape, which meant the amount of decorative plate beyond the button holes varied depending on the exact positioning of how it was sliced. this was brittle in general, but more importantly made many plates too big when I cleaned up some code to remove an override that I thought was irrelevant --- it was actually affecting the overall geometry outside of the slice Signed-off-by: Brian S. Stephan <bss@incorporeal.org>	2025-03-28 08:20:07 -05:00
Brian S. Stephan	432e6e74d5	put everything in docs/ in the build, in order to include images Signed-off-by: Brian S. Stephan <bss@incorporeal.org>	2025-03-26 16:32:30 -05:00
Brian S. Stephan	1e64f59134	minor README wording tweak Signed-off-by: Brian S. Stephan <bss@incorporeal.org>	2025-03-26 16:11:57 -05:00
Brian S. Stephan	a4f2650f00	include a v4.7 photo and add it to the README Signed-off-by: Brian S. Stephan <bss@incorporeal.org>	2025-03-26 15:56:46 -05:00
Brian S. Stephan	c9a74ebb18	build two zip files for printables uploading Signed-off-by: Brian S. Stephan <bss@incorporeal.org>	2025-03-26 14:39:49 -05:00