TEMP build123d framework stuff part 2

Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
TEMP build123d extremely basic panel demo
2024-07-05 17:23:11 -05:00 · 2024-07-05 17:21:57 -05:00 · 2024-07-04 21:58:43 -05:00 · 2024-07-02 10:24:13 -05:00
111 changed files with 2440 additions and 1924 deletions
--- a/.gitignore
+++ b/.gitignore
@ -1,4 +1,8 @@
 build/
-*.stl
+venv/
+*.egg-info/
+.tox/

+*.pyc
 *.sw*
+.coverage
--- a/.pylintrc
+++ b/.pylintrc
@ -0,0 +1,2 @@
+[MESSAGES CONTROL]
+disable = W,C,R
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@ -2,146 +2,6 @@

 Included is a summary of changes to the project, by version. Details can be found in the commit history.

-## v4.7.1
-
-### Fixes
-
-* Hull-based decorative plates were accidentally grown in v4.7.0 due to ye olde refactoring. They are back to the
-  dimensions they should be (give or take) because there was an underlying bug in how they were geometried pre-v4.7.1.
-* The docs/ directory in the build now includes the images referred to, especially in the README.
-
-### Miscellaneous
-
-* Some README tweaks, including another demonstrative photo.
-* The build creates both a ZIP of everything, including docs, for humans to download, and also a ZIP of *just* the STLs,
-  to ease uploading to Printables.
-
-## v4.7.0
-
-### Features
-
-* Inner wall pieces where the horizontal stripes jut through the horizontal stripe windows have been added, these look
-  decent and avoid the outer wall feeling extremely flimsy. This piece uses a "longish" front/back piece which isn't
-  retained as a separate piece, because the latter is not meant to be printed itself.
-* I somehow went this whole time without creating a simple Sega 2P layout panel and decorative plate; those have been
-  added.
-* Prototype (still literally a bit rough) braces for the corners and middle have been added. These pieces cover up the
-  seams of the frame, and add some visual depth and distinction, but are not for everyone. YMMV.
-* A new "superplate" of the "directional arc + W" plus "sega 2P nine" layouts combined has been added, this is a piece I
-  ended up not using in a build, but it functions as well as any of the plates, so why not.
-
-### Improvements
-
-* Visible round edges have been made more round.
-* The single-24mm-button decorative disc has been shrunk a bit, since (IMO) it stood out a bit too much relative to the
-  button.
-* The "longish" extended side has been made a bit simpler to construct.
-* The side piece construction has been reworked, making it a bit simpler to construct and reducing the build complexity,
-  though preview mode still complains about 2-manifold errors.
-* The assembly documentation has been cleaned up, with more pieces explained a bit better as well.
-* Dustwashers got some small updates to shrink the size of the disc to the normal JLF dustwasher size, and to fit the
-  shaft a bit tighter without obstructing the lever's ability to... be a lever.
-
-### Miscellaneous
-
-* The build has been improved to error when there are issues in the .scad files, to keep me from making bad packages.
-* The back pieces are aligned properly in the all together demo.
-* Updates to the docs on my preferred printing settings.
-* README updates following the previous releases' reorganizations.
-* Objects README update to add attribution to TheTrain.
-
-## v4.6.0
-
-### Features
-
-* All frame pieces were updated to have flush edges, a la the "extended" sides, rather than the seam between the
-  front/back and the sides being at a 45 degree angle on some pieces, with the latter meaning that we were maintaining
-  two (complicated) duplicates of the same pieces because both 45 degree and 90 degree angles were necessary. This does
-  not affect the look of the build much, but simplifies the print and the maintenance of the project.
-* A slightly-extended flat side piece was added, to add just a bit of length to the overall build.
-
-### Improvements
-
-* One more slash has been added to the frame pieces, just for more interesting visuals.
-* The rectangle plates' positioning was tweaked slightly.
-
-### Fixes
-
-* The frame solid was very slightly shorter than it should have been as the corners relied on cylinders. The core solid
-  is now at its proper dimensions.
-
-## v4.5.0
-
-### Features
-
-* Many components for the Buildable Stick System - Arcade Edition --- pieces to create a control enclosure for the Qanba
-  2009 base! These pieces live in `extras/bss-ae/` but do use some parts from the base project; check that subdir's
-  README.
-* Created a Sega 2P 11 button layout, basically following the curve of the fourth column and adding a fifth, plus one
-  extra button
-* More decorative plates, this time square ones for an NES-styled project.
-
-### Improvements
-
-* Button layout positions for Sega 2P and directional arc layouts have been parameterized.
-* The decorative plates for the directional arc + W and Sega 2P 9 layout have been split into two files, since there was
-  no reason to keep them as one with multiple pieces anymore.
-* Tweaks to the horizontal stripes in order to get them to print better.
-* Renamed "Sega 2P plus one" to Sega 2P 9, following the pattern of the 11 layout.
-
-### Miscellaneous
-
-* Renaming of extended side pieces to fit the front/back idiom.
-* Cleanups to the demos.
-
-## v4.4.3
-
-### Features
-
-* Windowed frame wall pieces were made for the "clean" front/back walls that line up with the extended sides.
-
-### Improvements
-
-* The inner wall piece has been thickened, bringing its surface closer to the end of the outer wall windowed frame
-  pieces, making the window less deep and the inner wall easier to see.
-* The inner wall piece has been shrunken on the Z in order to leave some material on the outer wall and thus improve the
-  friction fit and clamp of the outer wall piece, which was too weakened by the unsupported top and bottom otherwise.
-
-### Miscellaneous
-
-* Documentation updates, especially around the printing of parts.
-* Corrected the names of some pieces that were accidentally duplicated from the file they were copied from rather than
-  what they were, or otherwise didn't match the standard pattern (such as it is).
-
-## v4.4.2
-
-### Bugfixes
-
-* Fix a regression with the small button screw-in space cutting into the frame wall supports. The screw-in space is
-  potentially more important for some nuts than the thickness of the frame wall supports, so the latter have been
-  thinned slightly.
-
-## v4.4.1
-
-### Features
-
-* A new lever + Sega 2P 6 button panel has been added. The overhang version hadn't been updated in forever, but the
-  inset panel moved stuff around in a way that allowed a couple aux buttons to fit in, so those have been added to the
-  overhang panel as well.
-* A horizontal stripe frame windowed piece has been added. YMMV may vary a bit on this vs. an empty window --- you can
-  see less of the inner object with the stripes, but it's a bit more stable.
-
-### Improvements
-
-* The frame wall slashes have been made a bit more reusable.
-* The area around button holes for screw-ins has been tweaked to be a bit smaller for 30mm buttons and a bit larger for
-  24mm buttons.
-
-### Miscellaneous
-
-* A bottom overhang panel was positioned incorrectly in the demo file; this has been fixed.
-* Added a demo of the one-panel overhang lever + 6 button stick.
-
 ## v4.4.0

 ### Features
--- a/9
+++ b/9
@ -1,13 +1,12 @@
 all:
 	python build.py
 	mkdir -p ./build/docs
-	cp ./README.md ./build/README.md
-	cp ./docs/README-objects.md ./build/README-objects.md
-	cp ./docs/* ./build/docs/
+	cp ./docs/README-objects.md ./build/README.md
+	cp ./docs/assembly-and-tips.md ./build/docs/assembly-and-tips.md
+	cp ./docs/printing-and-materials.md ./build/docs/printing-and-materials.md
 	cp ./LICENSE ./build/LICENSE
 	cp ./CHANGELOG.md ./build/CHANGELOG.md
-	pushd ./build; zip ./buildable-stick-system-`git describe --dirty`-stls-and-docs.zip . -r; popd
-	pushd ./build; zip ./buildable-stick-system-`git describe --dirty`-stls.zip extras frames misc panels -r; popd
+	pushd ./build; zip ./buildable-stick-system-`git describe --dirty`-stls.zip . -r; popd

 clean:
 	rm -rf ./build
--- a/README.md
+++ b/README.md
@ -1,15 +1,12 @@
 # The Buildable Stick System

-Files for 3D printing and building an arcade stick enclosure.
+Files for 3D printing an arcade stick.

 Have you ever wanted to conjure your own arcade stick out of the ether (well, plastic), or to prototype a new layout or
 design before sending it to a custom builder? Do you just love having your space filled with arcade stick enclosures,
 because you keep making different variants, colorways, and so on? Or do you simply want a good stick on the cheap, and
 know someone or a library with a 3D printer? The Buildable Stick System may be the project for you!

-**Join the project IRC channel: [#buildable-stick-system @
-Randomus](https://webirc.randomus.net/#buildable-stick-system)!**
-
 ![An example of stick components displayed in OpenSCAD](docs/blown-up-demo.png)

 [OpenSCAD-based illustration of how the components for an overhang panel-based stick fit together.]
@ -40,17 +37,21 @@ about what the types of parts are and how to use them:
      larger arcade sticks. They are simple to assemble, but you have fewer modularity/customization options, and they
      are harder to print because the physics of the material cooling will probably pull the corners up. They also need
      supports, since the top and bottom of the frame both have trays for panels to go into. Use at your own risk.
-    * `pieces/` these are the same four walls (generally speaking) as in the complete frames above, broken out into
-      modular pieces to print separately. Because they are separate pieces, you can mix and match colors, and you can
-      lay them all face down on the print surface for better adhesion and surface patterns. There are also variants
-      here, the "windowed" pieces, for doing two-tone variants and that kind of thing. There are also frame walls pulled
-      out to create MCZ TE-style extended sides. There is an interconnect that stands in for the joined inner wall
-      between boxes of the overall unit. You need this if you are combining multiple sets of walls, e.g. for a
-      two-panel-long stick.
+    * `pieces/`
+        * `box/` --- these are the same four walls (generally speaking) as in the complete frames above, broken out into
+          modular pieces to print separately. Because they are separate pieces, you can mix and match colors, and you
+          can lay them all face down on the print surface for better adhesion and surface patterns. There are also
+          variants here, the "windowed" pieces, for doing two-tone variants and that kind of thing.
+        * `extended/` --- the frame walls are pulled out to create MCZ TE-style extended sides. Rather than getting a
+          box look, you get a longer slab with nice bevels. These look nice, but slightly fiddily to print (and of
+          course need more material) --- watch your surface adhesion.
+        * `interconnect` --- complete frames are bolted to one another, but for frame pieces, there is an interconnect
+          that stands in for the joined inner wall. You need this if you are combining multiple sets of walls, e.g. for
+          a two-panel-long stick.
 * `panels/`
    * `inset/` --- various panels, all of the same size, that fit into and flush with the frame, making the arcade stick
-      top or bottom. Aside from using up a bit of the space for components inside the frame, come with no downsides ---
-      they print easily and are a pretty simple shape to tweak and remix.
+      top or bottom. These work equally well with box or extended frames, and aside from using up a bit of the space
+      inside the frame, come with no downsides --- they print easily and are a pretty simple shape to tweak and remix.
    * `overhang/` --- overhang panels have their plane extending over the edge of the frame, creating a bit of a
      sandwich look. This is mostly an aesthetic choice, but they sit higher in the frame as well, the main panel being
      over/under the frame rather than within it. This extra space is useful for taller levers. The only downside to
@ -65,16 +66,11 @@ about what the types of parts are and how to use them:
 * `extras/`
    * Various experiments and things not directly related to making an arcade stick. At time of writing, there's a
      couple pieces for a little stand for the stick, solely for vanity purposes.
-        * `bss-ae/` --- these are pieces for an arcade control panel that fits on the Qanba 2009. See the docs in that
-          directory for details.
-
-Feel free to request or contribute to more objects. Additional documentation regarding assembling the stick is available
-in `docs/assembly-and-tips.md`.

 ## Printing

 These items all fit on a 256mm^2 print bed; I use a Bambu Lab P1P based on what I've learned from the
-OpenStickCommunity. Standard settings seem sufficiently sturdy, but see `docs/printing-and-materials.md` for more
+OpenStickCommunity. Standard settings seem sufficiently sturdy, but see `docs/materials-and-printing.md` for more
 thoughts and settings based on my tinkering with prints.

 ## Assembling
@ -135,16 +131,6 @@ Board, ~$60 for Sanwa buttons and a lever, and ~$20 for miscellaneous connectors
 full-featured controller with an open source foundation together for around $140. Reducing wall and infill settings
 will probably save you around $5 of material, and you can probably decide what you want to do from there.

-## FAQ
-
-### I get a bunch of warnings on not being able to include files when I open them in OpenSCAD, what do I do?
-
-OpenSCAD pathing is relative to the current working directory by default, which is probably not the `src/` directory.
-When you start OpenSCAD, you must either start it from inside the project's `src/` directory, or point it at the path to
-the source files via e.g. `OPENSCADPATH=path/to/buildable-stick-system/src/ openscad`.
-
-See <https://en.wikibooks.org/wiki/OpenSCAD_User_Manual/Include_Statement>.
-
 ## Miscellany

 See the `/docs/` directory for more thoughts too scattered for this document.
@ -175,13 +161,12 @@ to hang out and discuss issues and features and whatnot.

 Written by and copyright Brian S. Stephan (<bss@incorporeal.org>).

-The Buildable Stick System is free software: you can redistribute it and/or modify it under the terms of the GNU General
-Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any
-later version.
+The Buildable Stick System is free software: you can redistribute it and/or modify it under the terms of the GNU General Public
+License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later
+version.

-The Buildable Stick System is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the
-implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
-details.
+The Buildable Stick System is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied
+warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

 You should have received a copy of the GNU General Public License along with the Buildable Stick System. If not, see
 <https://www.gnu.org/licenses/>.
@ -205,9 +190,3 @@ like the below should suffice in either electronic or printed form:

 > This arcade stick is part of the Buildable Stick System, version X.Y.Z; the source code to this program is available
 > under the terms of the GNU General Public License, at [LINK].
-
-## Gallery
-
-More photos.
-
-![A photo of three completed sticks](docs/finished-v4.7-x3.jpg)
--- a/TODO.md
+++ b/TODO.md
@ -5,7 +5,3 @@ Notes for "next time".
 ## v4.x

 * Engraving some cosmetic stuff? Or maybe a place to mount other plates on the top?
-
-## v5
-
-* Finishing the build123d rewrite?
--- a/build.py
+++ b/build.py
@ -42,11 +42,9 @@ for root, dirs, files in os.walk('.'):
        stl_file = re.sub(r'\.scad$', '.stl', file)
        input_ = os.path.join(input_dir, file)
        output = os.path.join(output_dir, stl_file)
-        cmd = f'openscad --hardwarnings -o {output} {input_}'
+        cmd = f'openscad -o {output} {input_}'
        print(cmd)
        processes.append(subprocess.Popen(cmd.split(' ')))

 for process in processes:
    process.wait()
-    if process.returncode != 0:
-        raise Exception(f"building {process.args} failed")
--- a/demo/all-together-demo-extended-with-windows.scad
+++ b/demo/all-together-demo-extended-with-windows.scad
@ -1,36 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <frames/pieces/side-trapezoid.scad>
-use <frames/pieces/front-or-back-aux-and-neutrik.scad>
-use <frames/pieces/front-or-back-windowed-horiz-stripes.scad>
-use <panels/inset/lever-and-dir_arc-plus-w-30mm-panel.scad>
-use <panels/inset/sega-2p-nine-plus-aux-button-with-mount.scad>
-use <misc/decorative-plate-24mm-button.scad>
-use <misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-nine.scad>
-use <misc/dustwasher-lsx-nobi.scad>
-
-top_panel_color        = "#5B6579";
-bottom_panel_color     = "#8E9089";
-frame_top_bottom_color = "#8E9089";
-frame_side_color       = "#8E9089";
-top_deco_color         = "#8E9089";
-
-color(top_panel_color) translate([-panel_x/2, 0, frame_z/2-panel_z+0.01]) lever_and_dir_arc_w_30mm_panel();
-color(top_panel_color) translate([panel_x/2, 0, frame_z/2-panel_z+0.01]) sega_2p_nine_plus_aux_button_with_mount();
-color(frame_side_color) translate([-frame_x/2+4, 0, -2.5]) side_trapezoid_frame_piece();
-color(frame_side_color) translate([frame_x/2-4, 0, -2.5]) mirror([1, 0, 0]) side_trapezoid_frame_piece();
-color(frame_top_bottom_color) translate([-frame_x/2+4, 0, -2.5])  horiz_striped_windowed_front_or_back_frame_piece();
-color(frame_top_bottom_color) translate([frame_x/2-4, 0, -2.5])  horiz_striped_windowed_front_or_back_frame_piece();
-color(frame_top_bottom_color) translate([-frame_x/2+4, 0, -2.5]) rotate([180, 0, 0]) front_or_back_aux_and_neutrik_frame_piece();
-color(frame_top_bottom_color) translate([frame_x/2-4, 0, -2.5]) rotate([180, 180, 0]) front_or_back_aux_and_neutrik_frame_piece();
-color(bottom_panel_color) translate([-panel_x/2, 0, -5-frame_z/2+5]) panel();
-color(bottom_panel_color) translate([panel_x/2, 0, -5-frame_z/2+5]) panel();
-
-color(top_deco_color) translate([0, 0, 3+frame_z/2-panel_z]) dir_arc_plus_w_30mm_and_sega_2p_nine_decorative_plate();
-color(top_deco_color) translate([-170, 20, 3+frame_z/2-panel_z]) lsx_nobi_dustwasher();
-color(top_deco_color) translate([panel_x-24, 30, 3+frame_z/2-panel_z]) button_24mm_decorative_plate();
--- a/demo/all-together-demo-extended.scad
+++ b/demo/all-together-demo-extended.scad
@ -5,33 +5,34 @@

 include <parameters.scad>
 include <components.scad>
-use <frames/pieces/side-trapezoid-extended-to-front-trapezoid.scad>
-use <frames/pieces/front-or-back-trapezoid.scad>
-use <frames/pieces/front-or-back-aux-and-neutrik.scad>
-use <panels/inset/lever-and-ergo-wasd-five-panel-with-oled.scad>
-use <panels/inset/ergo-nine-plus-aux-button-with-mount.scad>
+use <frames/pieces/extended/front-or-back.scad>
+use <frames/pieces/extended/side-extended-to-bottom.scad>
+use <frames/pieces/extended/front-or-back-clean-for-extended-side-aux-and-neutrik.scad>
+use <panels/inset/lever-and-dir_arc-plus-w-30mm-panel.scad>
+use <panels/inset/sega-2p-plus-one-plus-control-panel-with-mount.scad>
 use <misc/decorative-plate-24mm-button.scad>
-use <misc/decorative-plate-ergo-wasd-five-30mm-and-ergo-nine-30mm.scad>
+use <misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one.scad>
+use <misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one-plates.scad>
 use <misc/dustwasher-lsx-nobi.scad>

-top_panel_color        = "#0086D6";
-bottom_panel_color     = "white";
-frame_front_color      = "white";
-frame_back_color       = "white";
-frame_side_color       = "yellow";
-top_deco_color         = "white";
+top_panel_color        = "#5B6579";
+bottom_panel_color     = "#8E9089";
+frame_top_bottom_color = "#8E9089";
+frame_side_color       = "#8E9089";
+top_deco_color         = "#8E9089";

-color(top_panel_color) translate([-panel_x/2, 0, frame_z/2-panel_z/2+0.001]) lever_and_ergo_wasd_five_panel_with_oled();
-color(top_panel_color) translate([panel_x/2, 0, frame_z/2-panel_z/2+0.001]) ergo_nine_plus_aux_button_panel_with_mount();
-color(frame_side_color) translate([-frame_x/2+4, 0, 0]) side_trapezoid_extended_to_front_frame_piece();
-color(frame_side_color) translate([frame_x/2-4, 0, 0]) mirror([1, 0, 0]) side_trapezoid_extended_to_front_frame_piece();
-color(frame_front_color) translate([-frame_x/2+4, 0, 0])  front_or_back_trapezoid_frame_piece();
-color(frame_front_color) translate([frame_x/2-4, 0, 0])  front_or_back_trapezoid_frame_piece();
-color(frame_back_color) translate([-frame_x/2+4, 0, 0]) rotate([180, 0, 0]) front_or_back_aux_and_neutrik_frame_piece();
-color(frame_back_color) translate([frame_x/2-4, 0, 0]) rotate([180, 180, 0]) front_or_back_aux_and_neutrik_frame_piece();
-/* color(bottom_panel_color) translate([-panel_x/2, 0, -5-frame_z/2+5]) panel(); */
-/* color(bottom_panel_color) translate([panel_x/2, 0, -5-frame_z/2+5]) panel(); */
+color(top_panel_color) translate([-panel_x/2, 0, frame_z/2-panel_z+0.01]) lever_and_dir_arc_w_30mm_panel();
+color(top_panel_color) translate([panel_x/2, 0, frame_z/2-panel_z+0.01]) sega_2p_plus_one_plus_control_panel_with_mount();
+color(frame_side_color) translate([-frame_x/2+4, 0, -2.5]) extra_extended_left_or_right_frame_piece();
+color(frame_side_color) translate([frame_x/2-4, 0, -2.5]) mirror([1, 0, 0]) extra_extended_left_or_right_frame_piece();
+color(frame_top_bottom_color) translate([-frame_x/2+4, 0, -2.5])  extended_front_or_back_frame_piece();
+color(frame_top_bottom_color) translate([frame_x/2-4, 0, -2.5])  extended_front_or_back_frame_piece();
+color(frame_top_bottom_color) translate([-frame_x/2+4, 0, -2.5]) rotate([180, 0, 0]) front_or_back_aux_and_neutrik_box_frame_piece_for_extended_side();
+color(frame_top_bottom_color) translate([frame_x/2-4, 0, -2.5]) rotate([180, 180, 0]) front_or_back_aux_and_neutrik_box_frame_piece_for_extended_side();
+color(bottom_panel_color) translate([-panel_x/2, 0, -5-frame_z/2+5]) panel();
+color(bottom_panel_color) translate([panel_x/2, 0, -5-frame_z/2+5]) panel();

-color(top_deco_color) translate([0, 0, 4+frame_z/2-panel_z/2+0.001]) ergo_wasd_five_30mm_and_ergo_nine_30mm_decorative_plate();
-color(top_deco_color) translate([-170, 25, 4+frame_z/2-panel_z/2+0.001]) lsx_nobi_dustwasher();
-color(top_deco_color) translate([panel_x-24, 30, 4+frame_z/2-panel_z/2+0.001]) button_24mm_decorative_plate();
+/* color(top_deco_color) translate([0, 0, 3+frame_z/2-4]) dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate_of_plates(); */
+color(top_deco_color) translate([0, 0, 3+frame_z/2-panel_z]) dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate();
+color(top_deco_color) translate([-170, 20, 3+frame_z/2-panel_z]) lsx_nobi_dustwasher();
+color(top_deco_color) translate([panel_x-24, 30, 3+frame_z/2-panel_z]) button_24mm_decorative_plate();
--- a/demo/all-together-demo-solo.scad
+++ b/demo/all-together-demo-solo.scad
@ -1,28 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <frames/pieces/front-or-back-trapezoid.scad>
-use <frames/pieces/side-trapezoid-extended-to-front-trapezoid.scad>
-use <frames/pieces/front-or-back-aux-and-neutrik.scad>
-use <panels/inset/lever-and-dir_arc-plus-w-30mm-panel.scad>
-use <panels/inset/lever-and-sega-2p-6-button-panel-with-aux-with-mount.scad>
-use <misc/dustwasher-jlf.scad>
-
-top_panel_color        = "#5B6579";
-bottom_panel_color     = "#8E9089";
-frame_top_bottom_color = "#8E9089";
-frame_side_color       = "#8E9089";
-top_deco_color         = "#000000";
-
-color(top_panel_color) translate([0, 0, frame_z/2-panel_z+0.01]) lever_and_sega_2p_6_button_panel_with_aux_with_mount();
-color(frame_side_color) translate([0, 0, -2.5]) side_trapezoid_extended_to_front_frame_piece();
-color(frame_side_color) translate([0, 0, -2.5]) mirror([1, 0, 0]) side_trapezoid_extended_to_front_frame_piece();
-color(frame_top_bottom_color) translate([0, 0, -2.5])  front_or_back_trapezoid_frame_piece();
-color(frame_top_bottom_color) translate([0, 0, -2.5]) rotate([180, 0, 0]) front_or_back_aux_and_neutrik_frame_piece();
-color(bottom_panel_color) translate([0, 0, -5-frame_z/2+5]) panel();
-
-color(top_deco_color) translate([-65, 5, 3+frame_z/2-panel_z]) jlf_dustwasher();
--- a/demo/all-together-demo.scad
+++ b/demo/all-together-demo.scad
@ -5,31 +5,31 @@

 include <parameters.scad>
 include <components.scad>
-use <frames/pieces/side.scad>
-use <frames/pieces/front-or-back.scad>
-use <frames/pieces/front-or-back-aux-and-neutrik.scad>
-use <panels/inset/lever-and-ergo-wasd-five-panel-with-oled.scad>
-use <panels/inset/ergo-nine-plus-aux-button-with-mount.scad>
+use <frames/complete/left-frame.scad>
+use <frames/pieces/box/side.scad>
+use <frames/pieces/box/front-or-back.scad>
+use <frames/pieces/box/front-or-back-aux-and-neutrik.scad>
+use <panels/inset/lever-and-dir_arc-plus-w-30mm-panel.scad>
+use <panels/inset/sega-2p-plus-one-plus-control-panel-with-mount.scad>
 use <misc/decorative-plate-24mm-button.scad>
-use <misc/decorative-plate-ergo-wasd-five-30mm-and-ergo-nine-30mm.scad>
+use <misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one.scad>
+use <misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one-plates.scad>
 use <misc/dustwasher-lsx-nobi.scad>

 panel_color    = "red";
 base_color     = "gray";
 top_deco_color = "white";
-brace_color    = "gray";

-color(panel_color) translate([-panel_x/2, 0, frame_z/2-panel_z/2+0.001]) lever_and_ergo_wasd_five_panel_with_oled();
-color(panel_color) translate([panel_x/2, 0, frame_z/2-panel_z/2+0.001]) ergo_nine_plus_aux_button_panel_with_mount();
-color(base_color) translate([panel_x/2, 0, 0]) rotate([0, 180, 0]) side_frame_piece();
-color(base_color) translate([-panel_x/2, 0, 0]) side_frame_piece();
-color(base_color) translate([panel_x/2, 0, 0]) front_or_back_frame_piece();
-color(base_color) translate([-panel_x/2, 0, 0]) front_or_back_frame_piece();
-color(base_color) translate([panel_x/2, 0, 0]) rotate([180, 180, 0]) front_or_back_aux_and_neutrik_frame_piece();
-color(base_color) translate([-panel_x/2, 0, 0]) rotate([180, 0, 0]) front_or_back_aux_and_neutrik_frame_piece();
-/* color(base_color) translate([-panel_x/2, 0, -frame_z/2+panel_z/2]) panel(); */
-/* color(base_color) translate([panel_x/2, 0, -frame_z/2+panel_z/2]) panel(); */
+color(panel_color) translate([-panel_x/2, 0, frame_z/2-panel_z+0.01]) lever_and_dir_arc_w_30mm_panel();
+color(panel_color) translate([panel_x/2, 0, frame_z/2-panel_z+0.01]) sega_2p_plus_one_plus_control_panel_with_mount();
+color(base_color) translate([-frame_x/2+5, 0, -2.5]) left_frame();
+color(base_color) translate([panel_x/2, 0, -2.5]) rotate([0, 180, 0]) side_box_frame_piece();
+color(base_color) translate([panel_x/2, 0, -2.5]) front_or_back_box_frame_piece();
+color(base_color) translate([panel_x/2, 0, -2.5]) rotate([180, 180, 0]) front_or_back_aux_and_neutrik_box_frame_piece();
+color(base_color) translate([-panel_x/2, 0, -5-frame_z/2+5]) panel();
+color(base_color) translate([panel_x/2, 0, -5-frame_z/2+5]) panel();

-color(top_deco_color) translate([0, 0, 4+frame_z/2-panel_z/2+0.001]) ergo_wasd_five_30mm_and_ergo_nine_30mm_decorative_plate();
-color(top_deco_color) translate([-170, 25, 4+frame_z/2-panel_z/2+0.001]) lsx_nobi_dustwasher();
-color(top_deco_color) translate([panel_x-24, 30, 4+frame_z/2-panel_z/2+0.001]) button_24mm_decorative_plate();
+/* color(top_deco_color) translate([0, 0, 3+frame_z/2-4]) dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate_of_plates(); */
+color(top_deco_color) translate([0, 0, 3+frame_z/2-panel_z]) dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate();
+color(top_deco_color) translate([-170, 20, 3+frame_z/2-panel_z]) lsx_nobi_dustwasher();
+color(top_deco_color) translate([panel_x-24, 30, 3+frame_z/2-panel_z]) button_24mm_decorative_plate();
--- a/demo/blown-up-demo.scad
+++ b/demo/blown-up-demo.scad
@ -6,29 +6,29 @@
 include <parameters.scad>
 include <components.scad>
 use <frames/pieces/interconnect.scad>
-use <frames/pieces/side.scad>
-use <frames/pieces/front-or-back.scad>
-use <frames/pieces/front-or-back-aux-and-neutrik.scad>
+use <frames/pieces/box/side.scad>
+use <frames/pieces/box/front-or-back.scad>
+use <frames/pieces/box/front-or-back-aux-and-neutrik.scad>
 use <panels/overhang/left-lever-and-dir_arc-plus-w-30mm-panel.scad>
-use <panels/overhang/right-sega-2p-nine-plus-aux-button-with-mount.scad>
+use <panels/overhang/right-sega-2p-plus-one-plus-control-panel-with-mount.scad>
 use <panels/overhang/left-or-right-panel.scad>
 use <misc/decorative-plate-24mm-button.scad>
-use <misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-nine.scad>
+use <misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one.scad>
 use <misc/dustwasher-lsx-nobi.scad>

 color("#C12E1F") translate([-panel_x/2-25, 0, frame_z/2+75]) lever_and_dir_arc_w_30mm_left_overhang_panel();
-color("#C12E1F") translate([panel_x/2+25, 0, frame_z/2+75]) sega_2p_nine_plus_aux_button_right_overhang_panel_with_mount();
-color("black") translate([-frame_x/2+5-25, -55, -2.5]) front_or_back_frame_piece();
-color("black") rotate([0, 180, 0]) translate([-frame_x/2+5-25, -55, -2.5]) front_or_back_frame_piece();
-color("black") translate([-frame_x/2+5-50, 0, -2.5]) side_frame_piece();
-color("black") rotate([0, 180, 0]) translate([-frame_x/2+5-50, 0, -2.5]) side_frame_piece();
-color("black") rotate([180, 0, 0]) translate([-frame_x/2+5-25, -55, -2.5]) front_or_back_aux_and_neutrik_frame_piece();
-color("black") rotate([180, 0, 0]) rotate([0, 180, 0]) translate([-frame_x/2+5-25, -55, -2.5]) front_or_back_aux_and_neutrik_frame_piece();
+color("#C12E1F") translate([panel_x/2+25, 0, frame_z/2+75]) sega_2p_plus_one_plus_control_right_overhang_panel_with_mount();
+color("black") translate([-frame_x/2+5-25, -55, -2.5]) front_or_back_box_frame_piece();
+color("black") rotate([0, 180, 0]) translate([-frame_x/2+5-25, -55, -2.5]) front_or_back_box_frame_piece();
+color("black") translate([-frame_x/2+5-50, 0, -2.5]) side_box_frame_piece();
+color("black") rotate([0, 180, 0]) translate([-frame_x/2+5-50, 0, -2.5]) side_box_frame_piece();
+color("black") rotate([180, 0, 0]) translate([-frame_x/2+5-25, -55, -2.5]) front_or_back_aux_and_neutrik_box_frame_piece();
+color("black") rotate([180, 0, 0]) rotate([0, 180, 0]) translate([-frame_x/2+5-25, -55, -2.5]) front_or_back_aux_and_neutrik_box_frame_piece();
 color("black") rotate([0, 180, 0]) interconnect_frame_piece();
 color("#C12E1F") translate([-panel_x/2-25, 0, -5-frame_z/2-75]) left_or_right_overhang_panel();
 color("#C12E1F") mirror([0, 1, 0]) translate([panel_x/2+25, 0, -5-frame_z/2-75]) rotate([0, 0, 180])
 	left_or_right_overhang_panel();

-color("black") translate([0, 0, 3+frame_z/2+150]) dir_arc_plus_w_30mm_and_sega_2p_nine_decorative_plate();
+color("black") translate([0, 0, 3+frame_z/2+150]) dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate();
 color("black") translate([-195, 25, 3+frame_z/2+150]) lsx_nobi_dustwasher();
 color("black") translate([panel_x, 25, 3+frame_z/2+150]) button_24mm_decorative_plate();
--- a/docs/README-objects.md
+++ b/docs/README-objects.md
@ -1,11 +1,54 @@
 # The Buildable Stick System

-Files for 3D printing an arcade stick. See `README.md` for the core documentation, this file is specific to distributed
-objects.
+Files for 3D printing an arcade stick.

-## Attribution
+## Objects

-### Author and Licensing
+The following notes document the objects in the Buildable Stick System and how you can use them:
+
+* `frames/`
+    * `complete/` --- these are the four walls of the frame as one piece, in a couple variations for combining into
+      larger arcade sticks. They are simple to assemble, but you have fewer modularity/customization options, and they
+      are harder to print because the physics of the material cooling will probably pull the corners up. They also need
+      supports, since the top and bottom of the frame both have trays for panels to go into. Use at your own risk.
+    * `pieces/`
+        * `box/` --- these are the same four walls (generally speaking) as in the complete frames above, broken out into
+          modular pieces to print separately. Because they are separate pieces, you can mix and match colors, and you
+          can lay them all face down on the print surface for better adhesion and surface patterns. There are also
+          variants here, the "windowed" pieces, for doing two-tone variants and that kind of thing.
+        * `extended/` --- the frame walls are pulled out to create MCZ TE-style extended sides. Rather than getting a
+          box look, you get a longer slab with nice bevels. These look nice, but slightly fiddily to print (and of
+          course need more material) --- watch your surface adhesion.
+        * `interconnect` --- complete frames are bolted to one another, but for frame pieces, there is an interconnect
+          that stands in for the joined inner wall. You need this if you are combining multiple sets of walls, e.g. for
+          a two-panel-long stick.
+* `panels/`
+    * `inset/` --- various panels, all of the same size, that fit into and flush with the frame, making the arcade stick
+      top or bottom. These work equally well with box or extended frames, and aside from using up a bit of the space
+      inside the frame, come with no downsides --- they print easily and are a pretty simple shape to tweak and remix.
+    * `overhang/` --- overhang panels have their plane extending over the edge of the frame, creating a bit of a
+      sandwich look. This is mostly an aesthetic choice, but they sit higher in the frame as well, the main panel being
+      over/under the frame rather than within it. This extra space is useful for taller levers. The only downside to
+      these is that they aren't as reusable as the inset panels, since the inset panels can go anywhere, but the
+      overhang panels must be designed to not overlap with other overhang panels, so you might have to make more custom
+      variants depending on where you put things.
+* `misc/`
+    * Pieces that I haven't organized better (yet) --- there are decorative plates for top buttons and similar to give
+      more color variance and some layers to the arcade stick, some very simple dustwashers, plates that fit rocker
+      switches and the like in Neutrik D or 20mm holes, and a lever mount spacer for getting your lever shaft at the
+      desired height. You don't *need* any of these, but you'll probably use a few.
+* `extras/`
+    * Various experiments and things not directly related to making an arcade stick. At time of writing, there's a
+      couple pieces for a little stand for the stick, solely for vanity purposes.
+
+Feel free to request or contribute to more objects, see the links to Git repos below.
+
+## Printing and Assembling
+
+Additional documentation regarding printing the objects and assembling the stick are available in
+`docs/printing-and-materials.md` and `docs/assembly-and-tips.md`, respectively.
+
+## Author and Licensing

 Written by and copyright Brian S. Stephan (<bss@incorporeal.org>).

@ -28,22 +71,9 @@ details.
 You should have received a copy of the GNU General Public License along with the Buildable Stick System. If not, see
 <https://www.gnu.org/licenses/>.

-### Lineage
+## Lineage

 Inspired by the incredible work of [TheTrain](https://github.com/TheTrainGoes) on the [OpenStickCommunity Fightstick
 Case](https://github.com/OpenStickCommunity/Hardware/tree/main/Fightstick%20Case), itself based on the incredible work
 by [Dash n'Mash](https://twitter.com/Dash_xx_Mash?s=20). Original work Copyright 2023 TheTrain, [licensed under CC BY
 4.0](https://creativecommons.org/licenses/by/4.0/).
-
-Made possible by the amazing efforts of [slagcoin](https://www.slagcoin.com/).
-
-### Distributing BSS Sticks
-
-Under the terms of the GPLv3, you must inform the receiver of the "object code" of their rights under the GPLv3. This is
-a bit of a gray area for physical objects, but likely applies to distribution of modified or unmodified STL, STEP, etc.
-files at a minimum. The easiest way to satisfy the GPLv3 in either situation is to provide a link to the source code
-(either the unmodified mainline project, or your copy, with modifications listed in a "prominent notice"); something
-like the below should suffice in either electronic or printed form:
-
-> This arcade stick is part of the Buildable Stick System, version X.Y.Z; the source code to this program is available
-> under the terms of the GNU General Public License, at [LINK].
--- a/docs/assembly-and-tips.md
+++ b/docs/assembly-and-tips.md
@ -1,48 +1,12 @@
 # Assembly and Tips

-These are the parts you need and instructions for creating a simple two panel arcade stick. The end product is a
-rectangular prism roughly 18" long, with ample space for back buttons and enough top panel space for almost any layout
-you can imagine. There are more pieces and designs to experiment with, but this will get you an awesome "standard"
-build.
-
-## Parts for a Basic Enclosure
-
-The pieces you need to print (all colors to your taste):
-
-* **The base frame:** `frame/pieces/front-or-back.stl` x2 + `frame/pieces/front-or-back-aux-and-neutrik.stl` x2 +
-  `frame/pieces/interconnect.stl`. This creates a large "H" with six 24mm button holes and two Neutrik D holes on the
-  back, which can mount USB connectors or rocker switches, or be covered if not used. All four of the front or back
-  pieces connect to the interconnect piece, which creates one frame out of the individual pieces, and also adds some
-  support to the center of the enclosure. The interconnect has a large hole that can either make wire routing easier, or
-  leave space in the center for button layouts that span it.
-* **The frame sides:** `frame/pieces/side.stl` x2. These cap the "H", completing the overall frame.
-* **The top:** `panels/inset/[LAYOUTS].stl`. These panels go on the top of the frame and are where you mount all of your
-  main buttons and levers and whatnot. There are a couple layouts whose panels are meant to be paired (e.g.
-  `shiokenstar-left-panel.stl` and `shiokenstar-right-panel.stl`), but usually you simply pick a left panel (e.g.
-  `lever-panel-with-mount.stl`) and right panel (e.g. `sega-2p-panel.stl`) based on what you want. Note that one of your
-  choices should be "with mount", which is where the usually-sized PCB will screw into inside the box.
-* **The bottom:** `panels/inset/panel.stl` x2. Other than being the color of your choice, these just close the box.
-  You could put foam pads or something on these if you wanted.
-
-The above gets you the basics. Some common things you may also want:
-
-* **Mounting Neutrik connectors:** Neutrik D connectors can mount flush to the inside of the frame, but you can choose
-  to have a little decorative plate (`misc/neutrik-d-plate.stl` for added depth or color choices on the outside of the
-  frame, if you'd like.
-* **Mounting a 24mm switch:** a rocker switch can also be mounted in the Neutrik D connector, but it needs to be placed
-  into a `misc/neutrik-d-plate-24mm-hole.stl` plate, and the plate mounted to the frame.
-* **Flair for the auxillary buttons:** the three buttons in a row on the back of the frame can also get some style, just
-  place a `misc/decorative-plate-aux-control-three-button-cluster.stl` between the buttons and the frame. This only
-  works for screw-in buttons.
-* **Flair for the top buttons:** same as above, a decorative plate for top panel layouts --- e.g.
-  `misc/decorative-plate-sega-2p.stl` --- can be sandwiched between the buttons and panel to add some style. This also
-  only tends to work on screw-in buttons.
-* **Dustwashers/flair:** same deal, if you want to print one, use e.g. `misc/dustwasher-jlf.stl`.
+Just some miscellaneous notes for any dear reader, or more likely, my own forgetful self.

 ## Putting a BSS Stick Together

 Assembly of a stick is pretty straightforward, but there are some choices that can make it easier or harder. The
-following is the most consistent way I've found to put one together.
+following is the most consistent way I've found to put one together. This is assuming a v4.2 or beyond stick, with two
+panels to make a long standard stick, and the frame made of pieces.

 1. Prepare the frame pieces: this is your best shot to get the e.g. Neutrik plates for the USB mount, SPDT switches, etc.
   installed, so do it now, and give them a good tighten. You shouldn't need to adjust these again, so finish their
@ -70,3 +34,19 @@ following is the most consistent way I've found to put one together.

 In the end, this should be extremely sturdy. None of the frame or panels should be loose at all, and you should be able
 to move, flip, gently toss, etc. the stick without anything moving or feeling loose.
+
+## Removing Inset Panels
+
+As of v4.1 (or in v3), the top and bottom inset panels both insert into the frame, inside the frame "lip", meaning that
+when everything is put together, they create a flush surface (more or less). This can make them hard to get out, as you
+can't grab anything to get any leverage, and especially with v4.1, the plastic posts to aid the friction fit make it
+even harder to muscle out --- in fact, even if you could get an edge and start yanking, you'd probably just break some
+of the plastic.
+
+You can instead use the reverse side and the hex standoffs to push a panel out, as so:
+
+1. Loosen, or completely remove, the hex bolts for the panel you would like to remove.
+2. Flip the stick over, and remove the hex bolts on the opposite side.
+3. Screw in longer bolts, or anything else that'll fit into the hole without going flush against the panel.
+4. Push the long bolts in, thus pushing the standoffs, thus pushing the desired panel out from within.
+5. You may have to even get a mallet and tap on a bolt, occasionally, as everything can be *pretty* tight.
--- a/docs/finished-v4.7-x3.jpg
+++ b/docs/finished-v4.7-x3.jpg
--- a/docs/printing-and-materials.md
+++ b/docs/printing-and-materials.md
@ -4,19 +4,10 @@ bss's random thoughts and notes on the actual printing of the Buildable Stick Sy

 ## Printing Settings

-My preferred settings are 3 wall loops with 25% gyroid sparse infill. This gives the models a bit more weight and
+My preferred settings are 3 wall loops with 20% gyroid sparse infill. This gives the models a bit more weight and
 strength against bowing forces, but something more default, like 2 wall loops, 15% grid sparse infill, is fine and does
 not lead to a weak enclosure.

-### Supports and Positioning
-
-All of the parts are designed to be printed outside-face-down. The bevels are at an angle (45 degrees) that should print
-fine with no supports. Make sure everything is aligned properly on your plate so that the flat face you will look at the
-most is on the bottom.
-
-The only exception to this is the interconnect piece(s), which are not visible and need a support to print. Maybe one
-day I'll rejigger these.
-
 ### Working With Flatness

 A lot of the pieces are long and flat, so I recommend really dialing in your printer settings. The frame pieces make
@ -29,36 +20,15 @@ uniform lines that create reflection patterns on long, flat surfaces. This can b
 panels and their decorative plates, since they're what you're looking at 90% of the time, and the holes break up a
 perfect pattern, making the long lines stand out even more.

-Some specific parts are worth some additional notes:
-
 * **Top panels:** using a non-uniform pattern reduces if not eliminates the problem of the surface catching the light,
-  but for some patterns, it may come at the expense of time.
-    * **Avoid:** monotonic.
-    * **Good for the time:** Archimedean chords create the look of a circular ripple radiating out the center, and
-      depending on the material, you may not even notice it much, so it's a pretty good look/speed balance.
-    * **Great if you can wait:** hilbert curve leaves no discernable pattern on most materials, but some high gloss,
-      high contrast materials may show the winding pattern at some angles --- consider Archimedean chords for these.
-* **Circle-centric decorative plates:** simple ones could be fine in whatever, but the ones for action buttons end up
-  having lots of weird interaction points.
-    * **Avoid:** none; monotonic doesn't look *good*, but the plates don't have enough surface area for the pattern to
-      stand out too much.
-    * **Decent:** concentric is generally good, but you can get some pitting when the pattern radiating away from
-      buttons collides with other patterns, because none of the geometry lines up well.
-    * **Great:** Archimedean chords, just crank up the infill/wall overlap to avoid pits on the edges.
-* **Frame walls with Neutrik or aux button cutouts:** a reduced but similar problem with the action button decorative
-  plates, the circles near each other create weird interactions with the walls.
-    * **Avoid:** concentric, again, has problems with pitting where geometries clash.
-    * **Decent:** monotonic is pretty decent here, and you probably won't look at the sides too much, so maybe it
-      doesn't bother you.
-    * **Great:** Archimedean chords again, with the same infill/wall overlap as decorative plates.
-* **Flush frame walls:** you can pretty much do whatever you like here.
-    * **Great:** concentric produces an interesting pattern and you won't have collision problems in a rectangle.
-    * **Essentially great:** Archimedean chords yet again, you may just not like the pattern as much as the end result
-      of concentric.
+  but for some patterns, it may come at the expense of time. Other patterns may improve beyond monotonic, but hilbert
+  curve seems to be the gold standard.
+* **Circle-centric decorative plates:** don't use complex patterns like Archimedean chords on decorative plates, as they
+  seem to have issues with filling curves and you still want to try to maximize contact with walls. Concentric is great
+  here if you dial it in.

-The Archimedean chord pattern is a good default and prints awesome parts, with the only exception being the top panels,
-which benefit from using a Hilbert curve initial layer pattern instead, though you may be happy enough with Archimedean
-chord.
+The concentric pattern is a good default and prints awesome parts, with the only exception being the top panels, which
+benefit from using a Hilbert curve initial layer pattern instead of concentric.

 ## Materials

--- a/pyproject.toml
+++ b/pyproject.toml
@ -0,0 +1,53 @@
+[build-system]
+requires = ["setuptools>=61.0", "setuptools_scm[toml]>=6.2"]
+build-backend = "setuptools.build_meta"
+
+[project]
+name = "buildable-stick-system"
+description = "Files for 3D printing an arcade stick."
+readme = "README.md"
+license = {text = "GPL-3.0-or-later"}
+authors = [
+    {name = "Brian S. Stephan", email = "bss@incorporeal.org"},
+]
+requires-python = "<3.12,>=3.9"
+dependencies = ["build123d"]
+dynamic = ["version"]
+classifiers = [
+    # TODO
+]
+
+[project.urls]
+# TODO
+
+[project.optional-dependencies]
+dev = ["bandit", "flake8", "flake8-blind-except", "flake8-builtins", "flake8-docstrings",
+       "flake8-executable", "flake8-fixme", "flake8-isort", "flake8-logging-format", "flake8-mutable",
+       "flake8-pyproject", "mypy", "pip-tools", "pytest", "pytest-asyncio", "pytest-cov", "reuse",
+       "setuptools-scm", "tox", "twine"]
+gui = ["cadquery>=2.2", "CQ-Editor@git+https://github.com/jdegenstein/jmwright-CQ-Editor"]
+
+[project.scripts]
+# TODO
+
+[tool.flake8]
+enable-extensions = "G,M"
+exclude = [".tox/", "venv/", "_version.py", "tests/test-files/"]
+extend-ignore = "T101"
+max-complexity = 10
+max-line-length = 120
+
+[tool.isort]
+line_length = 120
+
+[tool.mypy]
+ignore_missing_imports = true
+
+[tool.pytest]
+python_files = ["*_tests.py", "tests.py", "test_*.py"]
+
+[tool.setuptools]
+# TODO
+
+[tool.setuptools_scm]
+# TODO
--- a/requirements/requirements-dev-and-gui.txt
+++ b/requirements/requirements-dev-and-gui.txt
@ -0,0 +1,644 @@
+#
+# This file is autogenerated by pip-compile with Python 3.11
+# by the following command:
+#
+#    pip-compile --extra=dev --extra=gui --output-file=requirements/requirements-dev-and-gui.txt
+#
+alabaster==0.7.16
+    # via sphinx
+anytree==2.12.1
+    # via build123d
+arrow==1.3.0
+    # via cookiecutter
+astroid==3.2.2
+    # via pylint
+asttokens==2.4.1
+    # via stack-data
+atomicwrites==1.4.1
+    # via spyder
+attrs==23.2.0
+    # via
+    #   jsonschema
+    #   referencing
+autopep8==2.0.4
+    # via python-lsp-server
+babel==2.15.0
+    # via sphinx
+backports-tarfile==1.2.0
+    # via jaraco-context
+bandit==1.7.9
+    # via buildable-stick-system (pyproject.toml)
+beautifulsoup4==4.12.3
+    # via nbconvert
+binaryornot==0.4.4
+    # via
+    #   cookiecutter
+    #   reuse
+black==24.4.2
+    # via python-lsp-black
+bleach==6.1.0
+    # via nbconvert
+boolean-py==4.0
+    # via
+    #   license-expression
+    #   reuse
+build==1.2.1
+    # via pip-tools
+build123d==0.4.0
+    # via buildable-stick-system (pyproject.toml)
+cachetools==5.3.3
+    # via tox
+cadquery==2.4.0
+    # via buildable-stick-system (pyproject.toml)
+cadquery-ocp==7.7.2
+    # via
+    #   build123d
+    #   cadquery
+    #   ocpsvg
+casadi==3.6.5
+    # via cadquery
+certifi==2024.6.2
+    # via requests
+cffi==1.16.0
+    # via cryptography
+chardet==5.2.0
+    # via
+    #   binaryornot
+    #   python-debian
+    #   spyder
+    #   tox
+charset-normalizer==3.3.2
+    # via requests
+click==8.1.7
+    # via
+    #   black
+    #   cookiecutter
+    #   pip-tools
+cloudpickle==3.0.0
+    # via
+    #   spyder
+    #   spyder-kernels
+colorama==0.4.6
+    # via tox
+comm==0.2.2
+    # via ipykernel
+cookiecutter==2.6.0
+    # via spyder
+coverage[toml]==7.5.4
+    # via pytest-cov
+cq-editor @ git+https://github.com/jdegenstein/jmwright-CQ-Editor
+    # via buildable-stick-system (pyproject.toml)
+cryptography==42.0.8
+    # via secretstorage
+debugpy==1.8.2
+    # via ipykernel
+decorator==5.1.1
+    # via ipython
+defusedxml==0.7.1
+    # via nbconvert
+diff-match-patch==20230430
+    # via
+    #   spyder
+    #   three-merge
+dill==0.3.8
+    # via pylint
+distlib==0.3.8
+    # via virtualenv
+docstring-to-markdown==0.15
+    # via python-lsp-server
+docutils==0.21.2
+    # via
+    #   readme-renderer
+    #   sphinx
+executing==2.0.1
+    # via stack-data
+ezdxf==1.3.1
+    # via
+    #   build123d
+    #   cadquery
+fastjsonschema==2.20.0
+    # via nbformat
+filelock==3.15.4
+    # via
+    #   tox
+    #   virtualenv
+flake8==7.0.0
+    # via
+    #   buildable-stick-system (pyproject.toml)
+    #   flake8-builtins
+    #   flake8-docstrings
+    #   flake8-executable
+    #   flake8-isort
+    #   flake8-mutable
+    #   flake8-pyproject
+    #   python-lsp-server
+flake8-blind-except==0.2.1
+    # via buildable-stick-system (pyproject.toml)
+flake8-builtins==2.5.0
+    # via buildable-stick-system (pyproject.toml)
+flake8-docstrings==1.7.0
+    # via buildable-stick-system (pyproject.toml)
+flake8-executable==2.1.3
+    # via buildable-stick-system (pyproject.toml)
+flake8-fixme==1.1.1
+    # via buildable-stick-system (pyproject.toml)
+flake8-isort==6.1.1
+    # via buildable-stick-system (pyproject.toml)
+flake8-logging-format==2024.24.12
+    # via buildable-stick-system (pyproject.toml)
+flake8-mutable==1.2.0
+    # via buildable-stick-system (pyproject.toml)
+flake8-pyproject==1.2.3
+    # via buildable-stick-system (pyproject.toml)
+fonttools==4.53.0
+    # via ezdxf
+idna==3.7
+    # via requests
+imagesize==1.4.1
+    # via sphinx
+importlib-metadata==8.0.0
+    # via
+    #   keyring
+    #   twine
+    #   yapf
+inflection==0.5.1
+    # via qstylizer
+iniconfig==2.0.0
+    # via pytest
+intervaltree==3.1.0
+    # via spyder
+ipykernel==6.29.5
+    # via
+    #   qtconsole
+    #   spyder-kernels
+ipython==8.26.0
+    # via
+    #   build123d
+    #   cq-editor
+    #   ipykernel
+    #   spyder
+    #   spyder-kernels
+isort==5.13.2
+    # via
+    #   flake8-isort
+    #   pylint
+jaraco-classes==3.4.0
+    # via keyring
+jaraco-context==5.3.0
+    # via keyring
+jaraco-functools==4.0.1
+    # via keyring
+jedi==0.19.1
+    # via
+    #   ipython
+    #   python-lsp-server
+    #   spyder
+jeepney==0.8.0
+    # via
+    #   keyring
+    #   secretstorage
+jellyfish==1.0.4
+    # via spyder
+jinja2==3.1.4
+    # via
+    #   cookiecutter
+    #   nbconvert
+    #   reuse
+    #   sphinx
+jsonschema==4.22.0
+    # via
+    #   nbformat
+    #   spyder
+jsonschema-specifications==2023.12.1
+    # via jsonschema
+jupyter-client==8.6.2
+    # via
+    #   ipykernel
+    #   nbclient
+    #   qtconsole
+    #   spyder-kernels
+jupyter-core==5.7.2
+    # via
+    #   ipykernel
+    #   jupyter-client
+    #   nbclient
+    #   nbconvert
+    #   nbformat
+    #   qtconsole
+jupyterlab-pygments==0.3.0
+    # via nbconvert
+keyring==25.2.1
+    # via
+    #   spyder
+    #   twine
+license-expression==30.3.0
+    # via reuse
+logbook==1.7.0.post0
+    # via cq-editor
+markdown-it-py==3.0.0
+    # via rich
+markupsafe==2.1.5
+    # via
+    #   jinja2
+    #   nbconvert
+matplotlib-inline==0.1.7
+    # via
+    #   ipykernel
+    #   ipython
+mccabe==0.7.0
+    # via
+    #   flake8
+    #   pylint
+    #   python-lsp-server
+mdurl==0.1.2
+    # via markdown-it-py
+mistune==3.0.2
+    # via nbconvert
+more-itertools==10.3.0
+    # via
+    #   jaraco-classes
+    #   jaraco-functools
+multimethod==1.9.1
+    # via cadquery
+mypy==1.10.1
+    # via buildable-stick-system (pyproject.toml)
+mypy-extensions==1.0.0
+    # via
+    #   black
+    #   mypy
+nbclient==0.10.0
+    # via nbconvert
+nbconvert==7.16.4
+    # via spyder
+nbformat==5.10.4
+    # via
+    #   nbclient
+    #   nbconvert
+nest-asyncio==1.6.0
+    # via ipykernel
+nh3==0.2.17
+    # via readme-renderer
+nlopt==2.7.1
+    # via cadquery
+nptyping==2.0.1
+    # via cadquery
+numpy==1.26.4
+    # via
+    #   build123d
+    #   casadi
+    #   ezdxf
+    #   nlopt
+    #   nptyping
+    #   numpy-stl
+    #   pyqtgraph
+    #   scipy
+    #   svgpathtools
+numpy-stl==3.1.1
+    # via build123d
+numpydoc==1.7.0
+    # via spyder
+ocpsvg==0.2.1
+    # via build123d
+packaging==24.1
+    # via
+    #   black
+    #   build
+    #   ipykernel
+    #   nbconvert
+    #   pyproject-api
+    #   pytest
+    #   pytoolconfig
+    #   qtconsole
+    #   qtpy
+    #   setuptools-scm
+    #   sphinx
+    #   tox
+pandocfilters==1.5.1
+    # via nbconvert
+parso==0.8.4
+    # via
+    #   jedi
+    #   spyder
+path==16.14.0
+    # via
+    #   cadquery
+    #   cq-editor
+pathspec==0.12.1
+    # via black
+pbr==6.0.0
+    # via stevedore
+pexpect==4.9.0
+    # via
+    #   ipython
+    #   spyder
+pickleshare==0.7.5
+    # via spyder
+pip-tools==7.4.1
+    # via buildable-stick-system (pyproject.toml)
+pkginfo==1.10.0
+    # via twine
+platformdirs==4.2.2
+    # via
+    #   black
+    #   jupyter-core
+    #   pylint
+    #   pytoolconfig
+    #   tox
+    #   virtualenv
+    #   yapf
+pluggy==1.5.0
+    # via
+    #   pytest
+    #   python-lsp-server
+    #   tox
+prompt-toolkit==3.0.47
+    # via ipython
+psutil==6.0.0
+    # via
+    #   ipykernel
+    #   spyder
+ptyprocess==0.7.0
+    # via pexpect
+pure-eval==0.2.2
+    # via stack-data
+py-lib3mf==2.3.1
+    # via build123d
+pycodestyle==2.11.1
+    # via
+    #   autopep8
+    #   flake8
+    #   python-lsp-server
+pycparser==2.22
+    # via cffi
+pydocstyle==6.3.0
+    # via
+    #   flake8-docstrings
+    #   python-lsp-server
+pyflakes==3.2.0
+    # via
+    #   flake8
+    #   python-lsp-server
+pygments==2.18.0
+    # via
+    #   ipython
+    #   nbconvert
+    #   qtconsole
+    #   readme-renderer
+    #   rich
+    #   sphinx
+    #   spyder
+pylint==3.2.5
+    # via
+    #   python-lsp-server
+    #   spyder
+pylint-venv==3.0.3
+    # via spyder
+pyls-spyder==0.4.0
+    # via spyder
+pyparsing==3.1.2
+    # via ezdxf
+pyproject-api==1.7.1
+    # via tox
+pyproject-hooks==1.1.0
+    # via
+    #   build
+    #   pip-tools
+pyqt5==5.15.10
+    # via
+    #   cq-editor
+    #   pyqtwebengine
+    #   spyder
+pyqt5-qt5==5.15.14
+    # via pyqt5
+pyqt5-sip==12.13.0
+    # via
+    #   pyqt5
+    #   pyqtwebengine
+pyqtgraph==0.13.7
+    # via cq-editor
+pyqtwebengine==5.15.6
+    # via spyder
+pyqtwebengine-qt5==5.15.14
+    # via pyqtwebengine
+pytest==8.2.2
+    # via
+    #   buildable-stick-system (pyproject.toml)
+    #   pytest-asyncio
+    #   pytest-cov
+pytest-asyncio==0.23.7
+    # via buildable-stick-system (pyproject.toml)
+pytest-cov==5.0.0
+    # via buildable-stick-system (pyproject.toml)
+python-dateutil==2.9.0.post0
+    # via
+    #   arrow
+    #   jupyter-client
+python-debian==0.1.49
+    # via reuse
+python-lsp-black==2.0.0
+    # via spyder
+python-lsp-jsonrpc==1.1.2
+    # via python-lsp-server
+python-lsp-server[all]==1.11.0
+    # via
+    #   pyls-spyder
+    #   python-lsp-black
+    #   spyder
+python-slugify==8.0.4
+    # via cookiecutter
+python-utils==3.8.2
+    # via numpy-stl
+pytoolconfig[global]==1.3.1
+    # via rope
+pyxdg==0.28
+    # via spyder
+pyyaml==6.0.1
+    # via
+    #   bandit
+    #   cookiecutter
+pyzmq==26.0.3
+    # via
+    #   ipykernel
+    #   jupyter-client
+    #   qtconsole
+    #   spyder
+    #   spyder-kernels
+qdarkstyle==3.2.3
+    # via spyder
+qstylizer==0.2.3
+    # via spyder
+qtawesome==1.3.1
+    # via spyder
+qtconsole==5.5.2
+    # via spyder
+qtpy==2.4.1
+    # via
+    #   qdarkstyle
+    #   qtawesome
+    #   qtconsole
+    #   spyder
+readme-renderer==43.0
+    # via twine
+referencing==0.35.1
+    # via
+    #   jsonschema
+    #   jsonschema-specifications
+requests==2.32.3
+    # via
+    #   cookiecutter
+    #   cq-editor
+    #   requests-toolbelt
+    #   sphinx
+    #   twine
+requests-toolbelt==1.0.0
+    # via twine
+reuse==3.0.2
+    # via buildable-stick-system (pyproject.toml)
+rfc3986==2.0.0
+    # via twine
+rich==13.7.1
+    # via
+    #   bandit
+    #   cookiecutter
+    #   twine
+rope==1.13.0
+    # via python-lsp-server
+rpds-py==0.18.1
+    # via
+    #   jsonschema
+    #   referencing
+rtree==1.2.0
+    # via spyder
+scipy==1.14.0
+    # via svgpathtools
+secretstorage==3.3.3
+    # via keyring
+setuptools-scm==8.1.0
+    # via buildable-stick-system (pyproject.toml)
+six==1.16.0
+    # via
+    #   anytree
+    #   asttokens
+    #   bleach
+    #   python-dateutil
+snowballstemmer==2.2.0
+    # via
+    #   pydocstyle
+    #   sphinx
+sortedcontainers==2.4.0
+    # via intervaltree
+soupsieve==2.5
+    # via beautifulsoup4
+sphinx==7.3.7
+    # via
+    #   numpydoc
+    #   spyder
+sphinxcontrib-applehelp==1.0.8
+    # via sphinx
+sphinxcontrib-devhelp==1.0.6
+    # via sphinx
+sphinxcontrib-htmlhelp==2.0.5
+    # via sphinx
+sphinxcontrib-jsmath==1.0.1
+    # via sphinx
+sphinxcontrib-qthelp==1.0.7
+    # via sphinx
+sphinxcontrib-serializinghtml==1.1.10
+    # via sphinx
+spyder==5.5.5
+    # via cq-editor
+spyder-kernels==2.5.2
+    # via spyder
+stack-data==0.6.3
+    # via ipython
+stevedore==5.2.0
+    # via bandit
+svgelements==1.9.6
+    # via ocpsvg
+svgpathtools==1.6.1
+    # via
+    #   build123d
+    #   ocpsvg
+svgwrite==1.4.3
+    # via svgpathtools
+tabulate==0.9.0
+    # via numpydoc
+text-unidecode==1.3
+    # via python-slugify
+textdistance==4.6.2
+    # via spyder
+three-merge==0.1.1
+    # via spyder
+tinycss2==1.3.0
+    # via
+    #   nbconvert
+    #   qstylizer
+tomli==2.0.1
+    # via yapf
+tomlkit==0.12.5
+    # via pylint
+tornado==6.4.1
+    # via
+    #   ipykernel
+    #   jupyter-client
+tox==4.15.1
+    # via buildable-stick-system (pyproject.toml)
+traitlets==5.14.3
+    # via
+    #   comm
+    #   ipykernel
+    #   ipython
+    #   jupyter-client
+    #   jupyter-core
+    #   matplotlib-inline
+    #   nbclient
+    #   nbconvert
+    #   nbformat
+    #   qtconsole
+trianglesolver==1.2
+    # via build123d
+twine==5.1.1
+    # via buildable-stick-system (pyproject.toml)
+types-python-dateutil==2.9.0.20240316
+    # via arrow
+typing-extensions==4.12.2
+    # via
+    #   build123d
+    #   ezdxf
+    #   ipython
+    #   mypy
+    #   python-utils
+typish==1.9.3
+    # via cadquery
+ujson==5.10.0
+    # via
+    #   python-lsp-jsonrpc
+    #   python-lsp-server
+urllib3==2.2.2
+    # via
+    #   requests
+    #   twine
+virtualenv==20.26.3
+    # via tox
+watchdog==4.0.1
+    # via spyder
+wcwidth==0.2.13
+    # via prompt-toolkit
+webencodings==0.5.1
+    # via
+    #   bleach
+    #   tinycss2
+whatthepatch==1.0.5
+    # via python-lsp-server
+wheel==0.43.0
+    # via pip-tools
+wurlitzer==3.1.1
+    # via spyder-kernels
+yapf==0.40.2
+    # via python-lsp-server
+zipp==3.19.2
+    # via importlib-metadata
+
+# The following packages are considered to be unsafe in a requirements file:
+# pip
+# setuptools
--- a/requirements/requirements-dev.txt
+++ b/requirements/requirements-dev.txt
@ -0,0 +1,295 @@
+#
+# This file is autogenerated by pip-compile with Python 3.11
+# by the following command:
+#
+#    pip-compile --extra=dev --output-file=requirements/requirements-dev.txt
+#
+anytree==2.12.1
+    # via build123d
+asttokens==2.4.1
+    # via stack-data
+backports-tarfile==1.2.0
+    # via jaraco-context
+bandit==1.7.9
+    # via buildable-stick-system (pyproject.toml)
+binaryornot==0.4.4
+    # via reuse
+boolean-py==4.0
+    # via
+    #   license-expression
+    #   reuse
+build==1.2.1
+    # via pip-tools
+build123d==0.5.0
+    # via buildable-stick-system (pyproject.toml)
+cachetools==5.3.3
+    # via tox
+cadquery-ocp==7.7.2
+    # via
+    #   build123d
+    #   ocpsvg
+certifi==2024.6.2
+    # via requests
+cffi==1.16.0
+    # via cryptography
+chardet==5.2.0
+    # via
+    #   binaryornot
+    #   python-debian
+    #   tox
+charset-normalizer==3.3.2
+    # via requests
+click==8.1.7
+    # via pip-tools
+colorama==0.4.6
+    # via tox
+coverage[toml]==7.5.4
+    # via pytest-cov
+cryptography==42.0.8
+    # via secretstorage
+decorator==5.1.1
+    # via ipython
+distlib==0.3.8
+    # via virtualenv
+docutils==0.21.2
+    # via readme-renderer
+executing==2.0.1
+    # via stack-data
+ezdxf==1.3.1
+    # via build123d
+filelock==3.15.4
+    # via
+    #   tox
+    #   virtualenv
+flake8==7.1.0
+    # via
+    #   buildable-stick-system (pyproject.toml)
+    #   flake8-builtins
+    #   flake8-docstrings
+    #   flake8-executable
+    #   flake8-isort
+    #   flake8-mutable
+    #   flake8-pyproject
+flake8-blind-except==0.2.1
+    # via buildable-stick-system (pyproject.toml)
+flake8-builtins==2.5.0
+    # via buildable-stick-system (pyproject.toml)
+flake8-docstrings==1.7.0
+    # via buildable-stick-system (pyproject.toml)
+flake8-executable==2.1.3
+    # via buildable-stick-system (pyproject.toml)
+flake8-fixme==1.1.1
+    # via buildable-stick-system (pyproject.toml)
+flake8-isort==6.1.1
+    # via buildable-stick-system (pyproject.toml)
+flake8-logging-format==2024.24.12
+    # via buildable-stick-system (pyproject.toml)
+flake8-mutable==1.2.0
+    # via buildable-stick-system (pyproject.toml)
+flake8-pyproject==1.2.3
+    # via buildable-stick-system (pyproject.toml)
+fonttools==4.53.0
+    # via ezdxf
+idna==3.7
+    # via requests
+importlib-metadata==8.0.0
+    # via
+    #   keyring
+    #   twine
+iniconfig==2.0.0
+    # via pytest
+ipython==8.26.0
+    # via build123d
+isort==5.13.2
+    # via flake8-isort
+jaraco-classes==3.4.0
+    # via keyring
+jaraco-context==5.3.0
+    # via keyring
+jaraco-functools==4.0.1
+    # via keyring
+jedi==0.19.1
+    # via ipython
+jeepney==0.8.0
+    # via
+    #   keyring
+    #   secretstorage
+jinja2==3.1.4
+    # via reuse
+keyring==25.2.1
+    # via twine
+license-expression==30.3.0
+    # via reuse
+markdown-it-py==3.0.0
+    # via rich
+markupsafe==2.1.5
+    # via jinja2
+matplotlib-inline==0.1.7
+    # via ipython
+mccabe==0.7.0
+    # via flake8
+mdurl==0.1.2
+    # via markdown-it-py
+more-itertools==10.3.0
+    # via
+    #   jaraco-classes
+    #   jaraco-functools
+mypy==1.10.1
+    # via buildable-stick-system (pyproject.toml)
+mypy-extensions==1.0.0
+    # via mypy
+nh3==0.2.17
+    # via readme-renderer
+numpy==1.26.4
+    # via
+    #   build123d
+    #   ezdxf
+    #   numpy-stl
+    #   scipy
+    #   svgpathtools
+numpy-stl==3.1.1
+    # via build123d
+ocpsvg==0.2.1
+    # via build123d
+packaging==24.1
+    # via
+    #   build
+    #   pyproject-api
+    #   pytest
+    #   setuptools-scm
+    #   tox
+parso==0.8.4
+    # via jedi
+pbr==6.0.0
+    # via stevedore
+pexpect==4.9.0
+    # via ipython
+pip-tools==7.4.1
+    # via buildable-stick-system (pyproject.toml)
+pkginfo==1.10.0
+    # via twine
+platformdirs==4.2.2
+    # via
+    #   tox
+    #   virtualenv
+pluggy==1.5.0
+    # via
+    #   pytest
+    #   tox
+prompt-toolkit==3.0.47
+    # via ipython
+ptyprocess==0.7.0
+    # via pexpect
+pure-eval==0.2.2
+    # via stack-data
+py-lib3mf==2.3.1
+    # via build123d
+pycodestyle==2.12.0
+    # via flake8
+pycparser==2.22
+    # via cffi
+pydocstyle==6.3.0
+    # via flake8-docstrings
+pyflakes==3.2.0
+    # via flake8
+pygments==2.18.0
+    # via
+    #   ipython
+    #   readme-renderer
+    #   rich
+pyparsing==3.1.2
+    # via ezdxf
+pyproject-api==1.7.1
+    # via tox
+pyproject-hooks==1.1.0
+    # via
+    #   build
+    #   pip-tools
+pytest==8.2.2
+    # via
+    #   buildable-stick-system (pyproject.toml)
+    #   pytest-asyncio
+    #   pytest-cov
+pytest-asyncio==0.23.7
+    # via buildable-stick-system (pyproject.toml)
+pytest-cov==5.0.0
+    # via buildable-stick-system (pyproject.toml)
+python-debian==0.1.49
+    # via reuse
+python-utils==3.8.2
+    # via numpy-stl
+pyyaml==6.0.1
+    # via bandit
+readme-renderer==43.0
+    # via twine
+requests==2.32.3
+    # via
+    #   requests-toolbelt
+    #   twine
+requests-toolbelt==1.0.0
+    # via twine
+reuse==3.0.2
+    # via buildable-stick-system (pyproject.toml)
+rfc3986==2.0.0
+    # via twine
+rich==13.7.1
+    # via
+    #   bandit
+    #   twine
+scipy==1.14.0
+    # via svgpathtools
+secretstorage==3.3.3
+    # via keyring
+setuptools-scm==8.1.0
+    # via buildable-stick-system (pyproject.toml)
+six==1.16.0
+    # via
+    #   anytree
+    #   asttokens
+snowballstemmer==2.2.0
+    # via pydocstyle
+stack-data==0.6.3
+    # via ipython
+stevedore==5.2.0
+    # via bandit
+svgelements==1.9.6
+    # via ocpsvg
+svgpathtools==1.6.1
+    # via
+    #   build123d
+    #   ocpsvg
+svgwrite==1.4.3
+    # via svgpathtools
+tox==4.15.1
+    # via buildable-stick-system (pyproject.toml)
+traitlets==5.14.3
+    # via
+    #   ipython
+    #   matplotlib-inline
+trianglesolver==1.2
+    # via build123d
+twine==5.1.1
+    # via buildable-stick-system (pyproject.toml)
+typing-extensions==4.12.2
+    # via
+    #   build123d
+    #   ezdxf
+    #   ipython
+    #   mypy
+    #   python-utils
+urllib3==2.2.2
+    # via
+    #   requests
+    #   twine
+virtualenv==20.26.3
+    # via tox
+wcwidth==0.2.13
+    # via prompt-toolkit
+wheel==0.43.0
+    # via pip-tools
+zipp==3.19.2
+    # via importlib-metadata
+
+# The following packages are considered to be unsafe in a requirements file:
+# pip
+# setuptools
--- a/requirements/requirements-gui.txt
+++ b/requirements/requirements-gui.txt
@ -0,0 +1,508 @@
+#
+# This file is autogenerated by pip-compile with Python 3.11
+# by the following command:
+#
+#    pip-compile --extra=gui --output-file=requirements/requirements-gui.txt
+#
+alabaster==0.7.16
+    # via sphinx
+anytree==2.12.1
+    # via build123d
+arrow==1.3.0
+    # via cookiecutter
+astroid==3.2.2
+    # via pylint
+asttokens==2.4.1
+    # via stack-data
+atomicwrites==1.4.1
+    # via spyder
+attrs==23.2.0
+    # via
+    #   jsonschema
+    #   referencing
+autopep8==2.0.4
+    # via python-lsp-server
+babel==2.15.0
+    # via sphinx
+backports-tarfile==1.2.0
+    # via jaraco-context
+beautifulsoup4==4.12.3
+    # via nbconvert
+binaryornot==0.4.4
+    # via cookiecutter
+black==24.4.2
+    # via python-lsp-black
+bleach==6.1.0
+    # via nbconvert
+build123d==0.5.0
+    # via buildable-stick-system (pyproject.toml)
+cadquery==2.4.0
+    # via buildable-stick-system (pyproject.toml)
+cadquery-ocp==7.7.2
+    # via
+    #   build123d
+    #   cadquery
+    #   ocpsvg
+casadi==3.6.5
+    # via cadquery
+certifi==2024.6.2
+    # via requests
+cffi==1.16.0
+    # via cryptography
+chardet==5.2.0
+    # via
+    #   binaryornot
+    #   spyder
+charset-normalizer==3.3.2
+    # via requests
+click==8.1.7
+    # via
+    #   black
+    #   cookiecutter
+cloudpickle==3.0.0
+    # via
+    #   spyder
+    #   spyder-kernels
+comm==0.2.2
+    # via ipykernel
+cookiecutter==2.6.0
+    # via spyder
+cq-editor @ git+https://github.com/jdegenstein/jmwright-CQ-Editor
+    # via buildable-stick-system (pyproject.toml)
+cryptography==42.0.8
+    # via secretstorage
+debugpy==1.8.2
+    # via ipykernel
+decorator==5.1.1
+    # via ipython
+defusedxml==0.7.1
+    # via nbconvert
+diff-match-patch==20230430
+    # via
+    #   spyder
+    #   three-merge
+dill==0.3.8
+    # via pylint
+docstring-to-markdown==0.15
+    # via python-lsp-server
+docutils==0.21.2
+    # via sphinx
+executing==2.0.1
+    # via stack-data
+ezdxf==1.3.1
+    # via
+    #   build123d
+    #   cadquery
+fastjsonschema==2.20.0
+    # via nbformat
+flake8==7.0.0
+    # via python-lsp-server
+fonttools==4.53.0
+    # via ezdxf
+idna==3.7
+    # via requests
+imagesize==1.4.1
+    # via sphinx
+importlib-metadata==8.0.0
+    # via
+    #   keyring
+    #   yapf
+inflection==0.5.1
+    # via qstylizer
+intervaltree==3.1.0
+    # via spyder
+ipykernel==6.29.5
+    # via
+    #   qtconsole
+    #   spyder-kernels
+ipython==8.26.0
+    # via
+    #   build123d
+    #   cq-editor
+    #   ipykernel
+    #   spyder
+    #   spyder-kernels
+isort==5.13.2
+    # via pylint
+jaraco-classes==3.4.0
+    # via keyring
+jaraco-context==5.3.0
+    # via keyring
+jaraco-functools==4.0.1
+    # via keyring
+jedi==0.19.1
+    # via
+    #   ipython
+    #   python-lsp-server
+    #   spyder
+jeepney==0.8.0
+    # via
+    #   keyring
+    #   secretstorage
+jellyfish==1.0.4
+    # via spyder
+jinja2==3.1.4
+    # via
+    #   cookiecutter
+    #   nbconvert
+    #   sphinx
+jsonschema==4.22.0
+    # via
+    #   nbformat
+    #   spyder
+jsonschema-specifications==2023.12.1
+    # via jsonschema
+jupyter-client==8.6.2
+    # via
+    #   ipykernel
+    #   nbclient
+    #   qtconsole
+    #   spyder-kernels
+jupyter-core==5.7.2
+    # via
+    #   ipykernel
+    #   jupyter-client
+    #   nbclient
+    #   nbconvert
+    #   nbformat
+    #   qtconsole
+jupyterlab-pygments==0.3.0
+    # via nbconvert
+keyring==25.2.1
+    # via spyder
+logbook==1.7.0.post0
+    # via cq-editor
+markdown-it-py==3.0.0
+    # via rich
+markupsafe==2.1.5
+    # via
+    #   jinja2
+    #   nbconvert
+matplotlib-inline==0.1.7
+    # via
+    #   ipykernel
+    #   ipython
+mccabe==0.7.0
+    # via
+    #   flake8
+    #   pylint
+    #   python-lsp-server
+mdurl==0.1.2
+    # via markdown-it-py
+mistune==3.0.2
+    # via nbconvert
+more-itertools==10.3.0
+    # via
+    #   jaraco-classes
+    #   jaraco-functools
+multimethod==1.9.1
+    # via cadquery
+mypy-extensions==1.0.0
+    # via black
+nbclient==0.10.0
+    # via nbconvert
+nbconvert==7.16.4
+    # via spyder
+nbformat==5.10.4
+    # via
+    #   nbclient
+    #   nbconvert
+nest-asyncio==1.6.0
+    # via ipykernel
+nlopt==2.7.1
+    # via cadquery
+nptyping==2.0.1
+    # via cadquery
+numpy==1.26.4
+    # via
+    #   build123d
+    #   casadi
+    #   ezdxf
+    #   nlopt
+    #   nptyping
+    #   numpy-stl
+    #   pyqtgraph
+    #   scipy
+    #   svgpathtools
+numpy-stl==3.1.1
+    # via build123d
+numpydoc==1.7.0
+    # via spyder
+ocpsvg==0.2.1
+    # via build123d
+packaging==24.1
+    # via
+    #   black
+    #   ipykernel
+    #   nbconvert
+    #   pytoolconfig
+    #   qtconsole
+    #   qtpy
+    #   sphinx
+pandocfilters==1.5.1
+    # via nbconvert
+parso==0.8.4
+    # via
+    #   jedi
+    #   spyder
+path==16.14.0
+    # via
+    #   cadquery
+    #   cq-editor
+pathspec==0.12.1
+    # via black
+pexpect==4.9.0
+    # via
+    #   ipython
+    #   spyder
+pickleshare==0.7.5
+    # via spyder
+platformdirs==4.2.2
+    # via
+    #   black
+    #   jupyter-core
+    #   pylint
+    #   pytoolconfig
+    #   yapf
+pluggy==1.5.0
+    # via python-lsp-server
+prompt-toolkit==3.0.47
+    # via ipython
+psutil==6.0.0
+    # via
+    #   ipykernel
+    #   spyder
+ptyprocess==0.7.0
+    # via pexpect
+pure-eval==0.2.2
+    # via stack-data
+py-lib3mf==2.3.1
+    # via build123d
+pycodestyle==2.11.1
+    # via
+    #   autopep8
+    #   flake8
+    #   python-lsp-server
+pycparser==2.22
+    # via cffi
+pydocstyle==6.3.0
+    # via python-lsp-server
+pyflakes==3.2.0
+    # via
+    #   flake8
+    #   python-lsp-server
+pygments==2.18.0
+    # via
+    #   ipython
+    #   nbconvert
+    #   qtconsole
+    #   rich
+    #   sphinx
+    #   spyder
+pylint==3.2.5
+    # via
+    #   python-lsp-server
+    #   spyder
+pylint-venv==3.0.3
+    # via spyder
+pyls-spyder==0.4.0
+    # via spyder
+pyparsing==3.1.2
+    # via ezdxf
+pyqt5==5.15.10
+    # via
+    #   cq-editor
+    #   pyqtwebengine
+    #   spyder
+pyqt5-qt5==5.15.14
+    # via pyqt5
+pyqt5-sip==12.13.0
+    # via
+    #   pyqt5
+    #   pyqtwebengine
+pyqtgraph==0.13.7
+    # via cq-editor
+pyqtwebengine==5.15.6
+    # via spyder
+pyqtwebengine-qt5==5.15.14
+    # via pyqtwebengine
+python-dateutil==2.9.0.post0
+    # via
+    #   arrow
+    #   jupyter-client
+python-lsp-black==2.0.0
+    # via spyder
+python-lsp-jsonrpc==1.1.2
+    # via python-lsp-server
+python-lsp-server[all]==1.11.0
+    # via
+    #   pyls-spyder
+    #   python-lsp-black
+    #   spyder
+python-slugify==8.0.4
+    # via cookiecutter
+python-utils==3.8.2
+    # via numpy-stl
+pytoolconfig[global]==1.3.1
+    # via rope
+pyxdg==0.28
+    # via spyder
+pyyaml==6.0.1
+    # via cookiecutter
+pyzmq==26.0.3
+    # via
+    #   ipykernel
+    #   jupyter-client
+    #   qtconsole
+    #   spyder
+    #   spyder-kernels
+qdarkstyle==3.2.3
+    # via spyder
+qstylizer==0.2.3
+    # via spyder
+qtawesome==1.3.1
+    # via spyder
+qtconsole==5.5.2
+    # via spyder
+qtpy==2.4.1
+    # via
+    #   qdarkstyle
+    #   qtawesome
+    #   qtconsole
+    #   spyder
+referencing==0.35.1
+    # via
+    #   jsonschema
+    #   jsonschema-specifications
+requests==2.32.3
+    # via
+    #   cookiecutter
+    #   cq-editor
+    #   sphinx
+rich==13.7.1
+    # via cookiecutter
+rope==1.13.0
+    # via python-lsp-server
+rpds-py==0.18.1
+    # via
+    #   jsonschema
+    #   referencing
+rtree==1.2.0
+    # via spyder
+scipy==1.14.0
+    # via svgpathtools
+secretstorage==3.3.3
+    # via keyring
+six==1.16.0
+    # via
+    #   anytree
+    #   asttokens
+    #   bleach
+    #   python-dateutil
+snowballstemmer==2.2.0
+    # via
+    #   pydocstyle
+    #   sphinx
+sortedcontainers==2.4.0
+    # via intervaltree
+soupsieve==2.5
+    # via beautifulsoup4
+sphinx==7.3.7
+    # via
+    #   numpydoc
+    #   spyder
+sphinxcontrib-applehelp==1.0.8
+    # via sphinx
+sphinxcontrib-devhelp==1.0.6
+    # via sphinx
+sphinxcontrib-htmlhelp==2.0.5
+    # via sphinx
+sphinxcontrib-jsmath==1.0.1
+    # via sphinx
+sphinxcontrib-qthelp==1.0.7
+    # via sphinx
+sphinxcontrib-serializinghtml==1.1.10
+    # via sphinx
+spyder==5.5.5
+    # via cq-editor
+spyder-kernels==2.5.2
+    # via spyder
+stack-data==0.6.3
+    # via ipython
+svgelements==1.9.6
+    # via ocpsvg
+svgpathtools==1.6.1
+    # via
+    #   build123d
+    #   ocpsvg
+svgwrite==1.4.3
+    # via svgpathtools
+tabulate==0.9.0
+    # via numpydoc
+text-unidecode==1.3
+    # via python-slugify
+textdistance==4.6.2
+    # via spyder
+three-merge==0.1.1
+    # via spyder
+tinycss2==1.3.0
+    # via
+    #   nbconvert
+    #   qstylizer
+tomli==2.0.1
+    # via yapf
+tomlkit==0.12.5
+    # via pylint
+tornado==6.4.1
+    # via
+    #   ipykernel
+    #   jupyter-client
+traitlets==5.14.3
+    # via
+    #   comm
+    #   ipykernel
+    #   ipython
+    #   jupyter-client
+    #   jupyter-core
+    #   matplotlib-inline
+    #   nbclient
+    #   nbconvert
+    #   nbformat
+    #   qtconsole
+trianglesolver==1.2
+    # via build123d
+types-python-dateutil==2.9.0.20240316
+    # via arrow
+typing-extensions==4.12.2
+    # via
+    #   build123d
+    #   ezdxf
+    #   ipython
+    #   python-utils
+typish==1.9.3
+    # via cadquery
+ujson==5.10.0
+    # via
+    #   python-lsp-jsonrpc
+    #   python-lsp-server
+urllib3==2.2.2
+    # via requests
+watchdog==4.0.1
+    # via spyder
+wcwidth==0.2.13
+    # via prompt-toolkit
+webencodings==0.5.1
+    # via
+    #   bleach
+    #   tinycss2
+whatthepatch==1.0.5
+    # via python-lsp-server
+wurlitzer==3.1.1
+    # via spyder-kernels
+yapf==0.40.2
+    # via python-lsp-server
+zipp==3.19.2
+    # via importlib-metadata
+
+# The following packages are considered to be unsafe in a requirements file:
+# setuptools
--- a/requirements/requirements.txt
+++ b/requirements/requirements.txt
@ -0,0 +1,89 @@
+#
+# This file is autogenerated by pip-compile with Python 3.11
+# by the following command:
+#
+#    pip-compile --output-file=requirements/requirements.txt
+#
+anytree==2.12.1
+    # via build123d
+asttokens==2.4.1
+    # via stack-data
+build123d==0.5.0
+    # via buildable-stick-system (pyproject.toml)
+cadquery-ocp==7.7.2
+    # via
+    #   build123d
+    #   ocpsvg
+decorator==5.1.1
+    # via ipython
+executing==2.0.1
+    # via stack-data
+ezdxf==1.3.1
+    # via build123d
+fonttools==4.53.0
+    # via ezdxf
+ipython==8.26.0
+    # via build123d
+jedi==0.19.1
+    # via ipython
+matplotlib-inline==0.1.7
+    # via ipython
+numpy==1.26.4
+    # via
+    #   build123d
+    #   ezdxf
+    #   numpy-stl
+    #   scipy
+    #   svgpathtools
+numpy-stl==3.1.1
+    # via build123d
+ocpsvg==0.2.1
+    # via build123d
+parso==0.8.4
+    # via jedi
+pexpect==4.9.0
+    # via ipython
+prompt-toolkit==3.0.47
+    # via ipython
+ptyprocess==0.7.0
+    # via pexpect
+pure-eval==0.2.2
+    # via stack-data
+py-lib3mf==2.3.1
+    # via build123d
+pygments==2.18.0
+    # via ipython
+pyparsing==3.1.2
+    # via ezdxf
+python-utils==3.8.2
+    # via numpy-stl
+scipy==1.14.0
+    # via svgpathtools
+six==1.16.0
+    # via
+    #   anytree
+    #   asttokens
+stack-data==0.6.3
+    # via ipython
+svgelements==1.9.6
+    # via ocpsvg
+svgpathtools==1.6.1
+    # via
+    #   build123d
+    #   ocpsvg
+svgwrite==1.4.3
+    # via svgpathtools
+traitlets==5.14.3
+    # via
+    #   ipython
+    #   matplotlib-inline
+trianglesolver==1.2
+    # via build123d
+typing-extensions==4.12.2
+    # via
+    #   build123d
+    #   ezdxf
+    #   ipython
+    #   python-utils
+wcwidth==0.2.13
+    # via prompt-toolkit
--- a/src/bss/init.py
+++ b/src/bss/init.py
@ -0,0 +1 @@
+"""The Buildable Stick System, code to generate arcade stick components."""
--- a/src/bss/core.py
+++ b/src/bss/core.py
@ -0,0 +1,68 @@
+"""Shared parameters and foundational objects.
+
+Reminder that the default unit is millimeters.
+
+SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+SPDX-License-Identifier: GPL-3.0-or-later
+"""
+import build123d as bd
+
+####################
+# measurements for holes and connectors
+####################
+HOLE_TOLERANCE = 0.15
+
+M4_BOLT_RADIUS = 2 + HOLE_TOLERANCE
+M4_BOLT_COUNTERSINK_RADIUS = M4_BOLT_RADIUS + 2
+
+####################
+# basic dimensions necessary for proper object composition
+####################
+
+# these are for ONE frame box, not the overall case, which may be composed
+# of multiple frames
+FRAME_X = 233
+FRAME_Y = 208
+FRAME_Z = 57
+
+# the "wall" is the space inside the frame that is reserved to make a lip for panels
+FRAME_WALL = 4
+
+# panel dimensions for either an inset panel or the inner tray of an overhang panel
+PANEL_X = FRAME_X - (FRAME_WALL * 2)
+PANEL_Y = FRAME_Y - (FRAME_WALL * 2)
+PANEL_Z = 5
+
+# the center point of where the standoff and bolts connecting a panel to a frame go,
+# relative to a centered object
+PANEL_TO_FRAME_POINT_OFFSET = 10
+PANEL_TO_FRAME_POINT_X = (PANEL_X/2) - PANEL_TO_FRAME_POINT_OFFSET
+PANEL_TO_FRAME_POINT_Y = (PANEL_Y/2) - PANEL_TO_FRAME_POINT_OFFSET
+
+####################
+# commonly used button dimensions
+####################
+
+BUTTON_30MM_RADIUS = 15 + HOLE_TOLERANCE
+BUTTON_24MM_RADIUS = 12 + HOLE_TOLERANCE
+
+# carve out space for snap-ins
+# judgng by https://www.slagcoin.com/joystick/attributes_brands.html 2.5mm is good for everything
+BUTTON_SNAP_IN_THICKNESS = 2.5
+
+# make sure the carve out space is also enough for screw-in nuts
+# slagcoin has screw-in nut diameter at 36mm for 30mm buttons, 29.5 for 24mm buttons
+# radius + value below should leave space for the nut and for fingers to grab the nut
+BUTTON_30MM_RADIUS_CONNECTOR_SPACE = 6
+
+####################
+# arcade stick parts that are relevant in a number of contexts
+####################
+
+
+class CutoutButtonHole(bd.CounterBoreHole):
+    """Use an inverted counter bore hole as the button hole with the extra thin space for snap-ins."""
+
+    def __init__(self, radius, **kwargs):
+        """Initialize the inverted counter bore hole with the right thinness for e.g. a panel to take snap-ins."""
+        super().__init__(radius, radius+BUTTON_30MM_RADIUS_CONNECTOR_SPACE, BUTTON_SNAP_IN_THICKNESS, **kwargs)
--- a/src/bss/layouts.py
+++ b/src/bss/layouts.py
@ -0,0 +1,31 @@
+"""Button and other component layouts for use in panels.
+
+SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+SPDX-License-Identifier: GPL-3.0-or-later
+"""
+import build123d as bd
+
+from bss import core
+
+####################
+# collected points and related data, to be used to construct a layout
+####################
+
+# 3x3, centered on top left (P1) button
+SEGA_2P_SIX_BUTTON = {'radius': core.BUTTON_30MM_RADIUS,
+                      'positions': [(0, 0), (30.5, 11 + 9), (30.5 + 36, 11 + 9),
+                                    (0, -19 - 9 - 11), (30.5, -19), (30.5 + 36, -19)]}
+
+####################
+# Layouts are Locations with extra stuff to document what it is
+####################
+
+
+class Layout(bd.Locations):
+    """A set of button positions that can be adjusted relative to some parameters."""
+
+    def __init__(self, layout, *args, distance_scale=1.00, **kwargs):
+        """Lay out the points for the buttons, etc. but can be scaled."""
+        self.points = list(map(lambda x: (x[0] * distance_scale, x[1] * distance_scale), layout['positions']))
+        self.button_radius = layout['radius']
+        super().__init__(self.points, *args, **kwargs)
--- a/src/bss/panels.py
+++ b/src/bss/panels.py
@ -0,0 +1,45 @@
+"""The base panel from which all other panels inherit.
+
+SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+SPDX-License-Identifier: GPL-3.0-or-later
+"""
+import logging
+
+import build123d as bd
+
+from bss import core, layouts
+
+logger = logging.getLogger(__name__)
+
+
+class Panel(bd.BasePartObject):
+    """A panel meant to be secured to the top or bottom of a base.
+
+    This is a hard box by default as an inset panel will be flush with the frame.
+    """
+
+    def __init__(self, *args, **kwargs):
+        """Create our part."""
+        with bd.BuildPart() as panel:
+            bd.Box(core.PANEL_X, core.PANEL_Y, core.PANEL_Z)
+            logger.info(panel.faces().sort_by(bd.Axis.Z))
+            with bd.Locations(panel.faces().sort_by(bd.Axis.Z)[-1]):
+                with bd.Locations((core.PANEL_TO_FRAME_POINT_X, core.PANEL_TO_FRAME_POINT_Y),
+                                  (-core.PANEL_TO_FRAME_POINT_X, core.PANEL_TO_FRAME_POINT_Y),
+                                  (-core.PANEL_TO_FRAME_POINT_X, -core.PANEL_TO_FRAME_POINT_Y),
+                                  (core.PANEL_TO_FRAME_POINT_X, -core.PANEL_TO_FRAME_POINT_Y)):
+                    bd.CounterSinkHole(core.M4_BOLT_RADIUS, core.M4_BOLT_COUNTERSINK_RADIUS)
+        super().__init__(panel.part, *args, **kwargs)
+
+
+with bd.BuildPart() as sega_2p_panel:
+    panel = Panel()
+    with layouts.Layout(layouts.SEGA_2P_SIX_BUTTON):
+        with bd.Locations((5, 45)):
+            with bd.Locations(panel.faces().sort_by(bd.Axis.Z)[0]):
+                core.CutoutButtonHole(layouts.SEGA_2P_SIX_BUTTON['radius'])
+
+try:
+    show_object(sega_2p_panel)
+except NameError:
+    pass
--- a/src/components.scad
+++ b/src/components.scad
@ -11,10 +11,6 @@ module m4_hole_countersink() {
 	cylinder(r1=m4_bolt_radius, r2=m4_bolt_countersink_radius, h=3.2, $fn=50, center=true);
 }

-module m6_hole() {
-	cylinder(r=m6_bolt_radius, h=100, $fn=50, center=true);
-}
-
 module panel_holes() {
 	// holes for mount bolts
 	translate([panel_to_frame_point_x, panel_to_frame_point_y, 0]) m4_hole();
@ -31,25 +27,27 @@ module panel_holes() {
 // button hole, with extra wide bits for various uses (cutting out space
 // for snap-ins, etc.
 module button_24mm_hole() {
-	cylinder(r=small_button_radius, h=100, $fn=100, center=true);
-	// carve out space for snap-ins and screw-in nuts
+	cylinder(r=small_button_radius, h=100, $fn=50, center=true);
+	// carve out space for snap-ins, leave 3mm
+	// slagcoin has screw-in nut diameter at 29.5mm, so radius+3 to leave some space
 	// translation is to leave 3mm thickness in the plate without recentering anything
-	translate([0, 0, -25]) cylinder(r=small_button_radius+button_radius_connector_space, h=49, $fn=100, center=true);
+	translate([0, 0, -25]) cylinder(r=small_button_radius+3, h=49, $fn=50, center=true);
 	// space for decorative button surround stuff
-	translate([0, 0, 50]) cylinder(r=small_button_radius*decorative_radius_scale, h=20, $fn=100, center=true);
-	translate([0, 0, 70]) cylinder(r=small_button_radius*jumbo_decorative_radius_scale, h=20, $fn=100, center=true);
+	translate([0, 0, 50]) cylinder(r=small_button_radius*decorative_radius_scale, h=20, $fn=50, center=true);
+	translate([0, 0, 70]) cylinder(r=small_button_radius*jumbo_decorative_radius_scale, h=20, $fn=50, center=true);
 }

 // button hole, with extra wide bits for various uses (cutting out space
 // for snap-ins, etc.
 module button_30mm_hole() {
-	cylinder(r=big_button_radius, h=100, $fn=100, center=true);
-	// carve out space for snap-ins and screw-in nuts
+	cylinder(r=big_button_radius, h=100, $fn=50, center=true);
+	// carve out space for snap-ins, leave 3mm
+	// slagcoin has screw-in nut diameter at 36mm, so radius+6 to leave some space
 	// translation is to leave 3mm thickness in the plate without recentering anything
-	translate([0, 0, -25]) cylinder(r=big_button_radius+button_radius_connector_space, h=49, $fn=100, center=true);
+	translate([0, 0, -25]) cylinder(r=big_button_radius+6, h=49, $fn=50, center=true);
 	// space for decorative button surround stuff
-	translate([0, 0, 50]) cylinder(r=big_button_radius*decorative_radius_scale, h=20, $fn=100, center=true);
-	translate([0, 0, 70]) cylinder(r=big_button_radius*jumbo_decorative_radius_scale, h=20, $fn=100, center=true);
+	translate([0, 0, 50]) cylinder(r=big_button_radius*decorative_radius_scale, h=20, $fn=50, center=true);
+	translate([0, 0, 70]) cylinder(r=big_button_radius*jumbo_decorative_radius_scale, h=20, $fn=50, center=true);
 }

 module frame_hex_bolt_hole() {
@ -84,7 +82,7 @@ module rocker_20mm_mount() {
 // space for a neutrik D mount or 24mm button --- Z is meant to leave some lip now that frames
 // are primarily printed on their side
 module frame_cutout() {
-	cube([35, 8, frame_z-(panel_z*3)], center=true);
+	cube([30.5, 8, frame_z-(panel_z*3)], center=true);
 }

 // bank of three 24mm buttons, commonly on a frame face
@ -94,12 +92,6 @@ module aux_control_three_button_cluster() {
 	translate([37, 0, 0]) button_24mm_hole();
 }

-module aux_control_three_button_tight_cluster() {
-	translate([-32, 0, 0]) button_24mm_hole();
-	translate([0, 0, 0]) button_24mm_hole();
-	translate([32, 0, 0]) button_24mm_hole();
-}
-
 module m2_mount_post() {
 	difference() {
 		cylinder(r=m2_screw_selftap_radius*2.25, h=3, $fn=6, center=true);
@ -107,24 +99,16 @@ module m2_mount_post() {
 	}
 }

-module adafruit_pid_326_oled_ssd1306_mount_post() {
-	cylinder(r=2.25/2, h=8, $fn=50, center=true);
+module oled_ssd1306_mount() {
+	translate([11.5, 12, 0]) m2_mount_post();
+	translate([11.5, -12, 0]) m2_mount_post();
+	translate([-11.5, 12, 0]) m2_mount_post();
+	translate([-11.5, -12, 0]) m2_mount_post();
 }

-// aligned to the cutout below
-module adafruit_pid_326_oled_ssd1306_mount() {
-	translate([12, 13.25, -2]) adafruit_pid_326_oled_ssd1306_mount_post();
-	translate([12, -13.25, -2]) adafruit_pid_326_oled_ssd1306_mount_post();
-	translate([-12, 13.25, -2]) adafruit_pid_326_oled_ssd1306_mount_post();
-	translate([-12, -13.25, -2]) adafruit_pid_326_oled_ssd1306_mount_post();
-}
-
-module adafruit_pid_326_oled_ssd1306_mount_cutout() {
-	translate([0, 3.5, 0]) cube([ssd1306_x, ssd1306_y, panel_z+0.1], center=true);
-	translate([0, 0, -ssd1306_z/2]) cube([adafruit_pid_326_oled_ssd1306_cutout_x,
-		adafruit_pid_326_oled_ssd1306_cutout_y, panel_z-ssd1306_z+0.1], center=true);
-	translate([0, 0, -ssd1306_z/2-2]) cube([adafruit_pid_326_oled_ssd1306_cutout_x*3/2,
-		adafruit_pid_326_oled_ssd1306_cutout_y/2, panel_z/2+0.1], center=true);
+module oled_ssd1306_mount_cutout() {
+	translate([0, 1.9, 0]) cube([25, 14, 5], center=true);
+	translate([0, 0, -1.0]) cube([35, 35, 4], center=true);
 }

 module m3_mount_post() {
@ -282,13 +266,13 @@ module frame_solid() {
 		];
 		hull() {
 			for (p = top_points) {
-				translate(p) cylinder(r=2, h=frame_bevel_height, center=true, $fn=4);
+				translate(p) cylinder(r=2, h=frame_bevel_height, center=true);
 			}
 			for (p = base_points) {
-				translate(p) cylinder(r=2, h=frame_z-(frame_bevel_height*2), center=true, $fn=4);
+				translate(p) cylinder(r=2, h=frame_z-(frame_bevel_height*2), center=true);
 			}
 			for (p = bottom_points) {
-				translate(p) cylinder(r=2, h=frame_bevel_height, center=true, $fn=4);
+				translate(p) cylinder(r=2, h=frame_bevel_height, center=true);
 			}
 		}
 	}
@ -360,14 +344,14 @@ module frame() {
 // for cutting out slashes from the frame outer wall
 module slash_cutout() {
 	polyhedron([
-		[slash_inner_displacement/2, -wall_cutout_depth, -slash_height/2],
-		[(slash_inner_displacement/2+slash_width), -wall_cutout_depth, -slash_height/2],
-		[(slash_inner_displacement/2+slash_width), wall_cutout_depth, -slash_height/2],
-		[slash_inner_displacement/2, wall_cutout_depth, -slash_height/2],
-		[-(slash_inner_displacement/2+slash_width), -wall_cutout_depth, slash_height/2],
-		[-slash_inner_displacement/2, -wall_cutout_depth, slash_height/2],
-		[-slash_inner_displacement/2, wall_cutout_depth, slash_height/2],
-		[-(slash_inner_displacement/2+slash_width), wall_cutout_depth, slash_height/2]
+		[slash_inner_displacement/2, -frame_wall/2, -slash_height/2],
+		[(slash_inner_displacement/2+slash_width), -frame_wall/2, -slash_height/2],
+		[(slash_inner_displacement/2+slash_width), frame_wall/2, -slash_height/2],
+		[slash_inner_displacement/2, frame_wall/2, -slash_height/2],
+		[-(slash_inner_displacement/2+slash_width), -frame_wall/2, slash_height/2],
+		[-slash_inner_displacement/2, -frame_wall/2, slash_height/2],
+		[-slash_inner_displacement/2, frame_wall/2, slash_height/2],
+		[-(slash_inner_displacement/2+slash_width), frame_wall/2, slash_height/2]
 	], [[0, 1, 2, 3], [4, 5, 1, 0], [7, 6, 5, 4], [5, 6, 2, 1], [6, 7, 3, 2], [7, 4, 0, 3]]);
 }

@ -414,40 +398,24 @@ module dir_arc_plus_w_24mm_8_button() {

 module dir_arc_30mm_thumb_button() {
 	// just my guesstimate on this one, but note that this is the same position as sega 2p (just mirrored)
-	translate([(panel_x/2)-sega_2p_column_1_left_panel_edge_offset, (-panel_y/2)+62, 0]) button_30mm_hole();
-}
-
-module dir_arc_30mm_fingers_left_button() {
-	translate([-dir_arc_30mm_column_3_offset, dir_arc_30mm_row_3_offset, 0]) dir_arc_30mm_thumb_button();
-}
-
-module dir_arc_30mm_fingers_middle_button() {
-	translate([-dir_arc_30mm_column_2_offset, dir_arc_30mm_row_3_offset, 0]) dir_arc_30mm_thumb_button();
-}
-
-module dir_arc_30mm_fingers_right_button() {
-	translate([0, dir_arc_30mm_row_2_offset, 0]) dir_arc_30mm_thumb_button();
+	translate([(panel_x/2)-28.06, (-panel_y/2)+62, 0]) button_30mm_hole();
 }

 module dir_arc_30mm_finger_buttons() {
-	dir_arc_30mm_fingers_left_button();
-	dir_arc_30mm_fingers_middle_button();
-	dir_arc_30mm_fingers_right_button();
-}
-
-module dir_arc_30mm_w_button() {
-	translate([-26.8, dir_arc_w_30mm_row_4_offset, 0]) dir_arc_30mm_thumb_button();
+	translate([0, 57.2, 0]) dir_arc_30mm_thumb_button();
+	translate([-33.8, 57.2+12.9, 0]) dir_arc_30mm_thumb_button();
+	translate([-33.8-34.8, 57.2+12.9, 0]) dir_arc_30mm_thumb_button();
 }

 module dir_arc_w_30mm() {
 	dir_arc_30mm_thumb_button();
 	dir_arc_30mm_finger_buttons();
-	dir_arc_30mm_w_button();
+	translate([-26.8, 57.2+12.9+34.5, 0]) dir_arc_30mm_thumb_button();
 }

 module dir_arc_w_30mm_plus_one() {
 	dir_arc_w_30mm();
-	translate([-dir_arc_30mm_column_3_offset-33.8, dir_arc_30mm_row_2_offset, 0]) dir_arc_30mm_thumb_button();
+	translate([-33.8-34.8-33.8, 57.2, 0]) dir_arc_30mm_thumb_button();
 }

 // Namco Noir (right hand)
@ -474,112 +442,31 @@ module noir_plus_one() {
 // Sega Astro City 2P (right hand)

 module sega_2p_p1() {
-	translate([-panel_x/2, -panel_y/2, 0]) translate([sega_2p_column_1_left_panel_edge_offset, 140, 0])
-		button_30mm_hole();
+	translate([-panel_x/2, -panel_y/2, 0]) translate([28.06, 140, 0]) button_30mm_hole();
 }

 module sega_2p_6_button() {
 	// via slagcoin
 	sega_2p_p1();
-	translate([sega_2p_column_2_offset, 11+9, 0]) sega_2p_p1();
-	translate([sega_2p_column_3_offset, 11+9, 0]) sega_2p_p1();
+	translate([30.5, 11+9, 0]) sega_2p_p1();
+	translate([30.5+36, 11+9, 0]) sega_2p_p1();
 	translate([0, -19-9-11, 0]) sega_2p_p1();
-	translate([sega_2p_column_2_offset, -19, 0]) sega_2p_p1();
-	translate([sega_2p_column_3_offset, -19, 0]) sega_2p_p1();
+	translate([30.5, -19, 0]) sega_2p_p1();
+	translate([30.5+36, -19, 0]) sega_2p_p1();
 }

 module sega_2p() {
 	sega_2p_6_button();
-	translate([sega_2p_column_4_offset, 11, 0]) sega_2p_p1();
-	translate([sega_2p_column_4_offset, -19-9, 0]) sega_2p_p1();
+	translate([30.5+36+36, 11, 0]) sega_2p_p1();
+	translate([30.5+36+36, -19-9, 0]) sega_2p_p1();
 }

-module sega_2p_nine_thumb_button() {
+module sega_2p_plus_one() {
+	sega_2p();
 	// just my guesstimate on this one
 	translate([0, -19-9-11-19-9-11, 0]) sega_2p_p1();
 }

-module sega_2p_nine() {
-	sega_2p();
-	sega_2p_nine_thumb_button();
-}
-
-module sega_2p_eleven() {
-	sega_2p_nine();
-	translate([sega_2p_column_5_offset, 0, 0]) sega_2p_p1();
-	translate([sega_2p_column_5_offset, -19-9-11, 0]) sega_2p_p1();
-}
-
-// BSS ERGO - 30mm
-
-module ergo_wasd_30mm() {
-	button_30mm_hole();					// W
-	translate([0, -36, 0]) button_30mm_hole();		// S
-	translate([-34.5, -36-9, 0]) button_30mm_hole();	// A
-	translate([34.5, -36-9, 0]) button_30mm_hole();		// D
-}
-
-module ergo_six_30mm() {
-	ergo_wasd_30mm();
-	translate([-34.5, -9, 0]) button_30mm_hole();		// left of W
-	translate([34.5, -9, 0]) button_30mm_hole();		// right of W
-}
-
-module ergo_eight_30mm() {
-	ergo_six_30mm();
-	translate([34.5*1.9, -9*3, 0]) button_30mm_hole();	// top right of right of W
-	translate([34.5*1.9, -36-9*3, 0]) button_30mm_hole();	// right of D
-}
-
-module ergo_wasd_five_30mm() {
-	translate([-51.75, 65.5, 0]) rotate([0, 0, 10]) {
-		ergo_wasd_30mm();
-	}
-	translate([0, 0, 0]) sega_2p_nine_thumb_button();
-}
-
-module ergo_nine_30mm() {
-	translate([-51.75, 65.5, 0]) rotate([0, 0, 10]) {
-		ergo_eight_30mm();
-	}
-	translate([0, 0, 0]) sega_2p_nine_thumb_button();
-}
-
-// untested
-// BSS ERGO - 24mm
-/* module ergo_wasd() { */
-/* 	button_24mm_hole();					// W */
-/* 	translate([0, -27, 0]) button_24mm_hole();		// S */
-/* 	translate([-26, -27-7, 0]) button_24mm_hole();		// A */
-/* 	translate([26, -27-7, 0]) button_24mm_hole();		// D */
-/* } */
-
-/* module ergo_six() { */
-/* 	ergo_wasd(); */
-/* 	translate([-26, -7, 0]) button_24mm_hole();		// left of W */
-/* 	translate([26, -7, 0]) button_24mm_hole();		// right of W */
-/* } */
-
-/* module ergo_eight() { */
-/* 	ergo_six(); */
-/* 	translate([26*2-2, -7*3, 0]) button_24mm_hole();	// top right of right of W */
-/* 	translate([26*2-2, -27-7*3, 0]) button_24mm_hole();	// top right of right of W */
-/* } */
-
-/* module ergo_wasd_five() { */
-/* 	translate([-63.25, 65.5, 0]) rotate([0, 0, 10]) { */
-/* 		ergo_wasd(); */
-/* 	} */
-/* 	translate([0, 0, 0]) sega_2p_nine_thumb_button(); */
-/* } */
-
-/* module ergo_nine() { */
-/* 	translate([-63.25, 65.5, 0]) rotate([0, 0, 10]) { */
-/* 		ergo_eight(); */
-/* 	} */
-/* 	translate([0, 0, 0]) sega_2p_nine_thumb_button(); */
-/* } */
-
 module shiokenstar() {
 	translate([-172, 32, 0]) dir_arc_24mm_directionals();
 	sega_2p();
--- a/src/extras/bss-ae/README.md
+++ b/src/extras/bss-ae/README.md
@ -1,38 +0,0 @@
-# BSS Arcade Edition
-
-Pieces for mounting to a Qanba 2009 in order to create the Buildable Stick System - Arcade Edition.
-
-## Pieces
-
-* 4 `interconnect-x` --- creating the internal support for joining two rows of panels
-* 6 `frames/pieces/interconnect` --- (core project) the standard piece for joining two+ columns of panels
-* 4 `extended-side-no-back` --- the extended side pieces, flush on the back to connect to each other
-* 4 `frames/pieces/extended/front-or-back` --- (core project) the front extended piece
-* 2 `extended-back` --- a small piece that fits into the Qanba 2009 "lip" for running cables
-* 1 `extended-back-left-mount`
-* 1 `extended-back-right-mount` --- extended back pieces that can be mounted to the Qanba 2009 base
-* 1 `panel-front-left-mount`
-* 1 `panel-front-right-mount` --- blank panels that can be mounted to the Qanba 2009 base
-* 6 `panels/inset/panel` --- the rest of the bottom panels
-* 4 `panels/inset/` panels of your choice for the front controls
-* 2 `panel-three-aux-buttons` --- for aux controls in the back row
-* 2 `panel-three-aux-buttons-and-rocker-hole` --- for aux controls and the wired rocker in the back row
-* 4 `decorative-plate-aux-control-tight-three-button-cluster` --- for decorating the aux control clusters
-* 4 `src/misc/` decorative plates of your choice for the front controls, and similar miscellany
-* 4 `mount-spacer` --- making a flush mount between the enclosure and the base
-
-## Hardware
-
-* 32 45mm M4 hex brass standoffs (or equivalent) for each panel/frame compartment
-* 64 8-12mm M4 countersunk hex bolts for attaching panels to the compartments
-* 4 8-12mm M3 hex bolts and 4 M3 flange nuts for attaching rocker switches to the back panels
-* 4 40mm M6 bolts for connecting the enclosure to the base
-* 4 M6 flange nuts
-
-## Components
-
-* 2 controller boards, e.g. the RP2040 Advanced Breakout Board
-* buttons and/or levers as desired
-* necessary wiring
-
-For the rest of the build (e.g. mounting a level to a panel), see the core README.
--- a/src/extras/bss-ae/decorative-plate-aux-control-tight-three-button-cluster.scad
+++ b/src/extras/bss-ae/decorative-plate-aux-control-tight-three-button-cluster.scad
@ -1,25 +0,0 @@
-/* Decorative plate for aux buttons.
- *
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-decorative_radius_scale = 1.5;
-include <components.scad>
-
-module aux_control_three_button_tight_cluster_decorative_plate() {
-	difference() {
-		hull() difference() {
-			// get a 2mm slice of the decorative button cylinders
-			translate([0, 0, -50]) aux_control_three_button_tight_cluster();
-			// keep a thin slice
-			translate([0, 0, -100]) cube([500, 500, 198], center=true);
-			translate([0, 0, 100]) cube([500, 500, 198], center=true);
-		}
-		// cut out the normal holes
-		translate([0, 0, -1]) aux_control_three_button_tight_cluster();
-	}
-}
-
-aux_control_three_button_tight_cluster_decorative_plate();
--- a/src/extras/bss-ae/extended-back-left-mount.scad
+++ b/src/extras/bss-ae/extended-back-left-mount.scad
@ -1,26 +0,0 @@
-/* A back piece of the enclosure, with a mounting hole.
- *
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <extended-back.scad>
-
-// X: inner post to post (inclusive) is approx. 428.625mm, so half that, minus half the post itself
-// (41.28mm) is how much in from a normal panel to put the M6 mounting hole
-// Y: eyeballed it to 30mm
-mount_hole_x = (panel_x / 2) - (panel_x - ((428.625 / 2) - (41.28 / 2)));
-mount_hole_y = (panel_y / 2) + 30;
-
-module left_mount_extended_back() {
-	difference() {
-		extended_back();
-		translate([mount_hole_x, -mount_hole_y, -30]) m6_hole();
-		// punch out the back for cables
-		cube([frame_x-70, frame_y+160, frame_z-20], center=true);
-	}
-}
-
-left_mount_extended_back();
--- a/src/extras/bss-ae/extended-back-right-mount.scad
+++ b/src/extras/bss-ae/extended-back-right-mount.scad
@ -1,15 +0,0 @@
-/* A back piece of the enclosure, with a mounting hole.
- *
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <extended-back-left-mount.scad>
-
-module right_mount_extended_back() {
-	mirror([1, 0, 0]) left_mount_extended_back();
-}
-
-right_mount_extended_back();
--- a/src/extras/bss-ae/extended-back.scad
+++ b/src/extras/bss-ae/extended-back.scad
@ -1,30 +0,0 @@
-/* A back piece extended the rest of the depth of the base.
- *
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <frames/pieces/front-or-back-trapezoid.scad>
-
-module back_piece_extension() {
-	// combine the original wall with a copy to "pull" the wall out
-	hull() {
-		linear_extrude(height=80) bottom_piece_wall();
-		linear_extrude(height=(frame_wall-frame_bevel_height)) bottom_piece_wall();
-	}
-}
-
-module extended_back() {
-	difference() {
-		union() {
-			clean_front_or_back();
-			translate([0, -frame_y/2+frame_wall, 0]) rotate([90, 0, 0]) back_piece_extension();
-		}
-		cube([frame_x-60, frame_y+160-10, frame_z-10], center=true);
-		translate([0, -frame_y/2-35, 0]) cube([frame_x-20, 70, frame_z-10], center=true);
-	}
-}
-
-extended_back();
--- a/src/extras/bss-ae/extended-side-no-back.scad
+++ b/src/extras/bss-ae/extended-side-no-back.scad
@ -1,60 +0,0 @@
-/* Create an extended side that is flush on the back to lay against another side.
- *
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <frames/complete/left-frame.scad>
-use <frames/pieces/side.scad>
-use <frames/pieces/front-or-back-trapezoid.scad>
-
-module side_frame_piece_wall() {
-	// this doesn't use the side_frame_piece because of the 45 degree angle geometry
-	// not creating a clean thing to cut, so we just take the whole wall and use that
-	projection(cut=true) rotate([0, 90, 0]) translate([frame_x/2-frame_wall-(frame_bevel_height/2), 0, 0])
-		left_frame();
-}
-
-module side_and_bottom_frame_piece_wall() {
-	// get a slice of the pieces, to use it in extruding
-	// this doesn't use the side_frame_piece because of the 45 degree angle geometry
-	// not creating a clean thing to cut, so we just take the whole wall and use that
-	side_frame_piece_wall();
-	projection(cut=true) translate([0, -frame_y/2+frame_wall, 0]) rotate([90, 90, 0]) bottom_piece_extension();
-}
-
-module side_and_bottom_frame_piece_extension() {
-	// combine the original with a shrunken piece to "pull" the wall out
-	hull() {
-		linear_extrude(height=frame_extension_y) scale([0.5, 0.90, 1]) side_and_bottom_frame_piece_wall();
-		linear_extrude(height=frame_extension_y) scale([0.5, 1, 1])
-			difference() {
-				side_frame_piece_wall();
-				// remove the front piece so it doesn't interfere with the front extend
-				translate([0, -frame_y/2, 0]) square([frame_x, frame_y], center=true);
-			}
-		linear_extrude(height=frame_bevel_height) side_and_bottom_frame_piece_wall();
-	}
-}
-
-module extra_extended_left_or_right_frame_piece() {
-	difference() {
-		union() {
-			difference() {
-				side_frame_piece();
-				// chop off the old edge which is getting replaced with the extension
-				translate([-frame_x/2+frame_bevel_height/2, 0, 0])
-					cube([frame_bevel_height, frame_y, frame_z], center=true);
-			}
-			translate([-frame_x/2+frame_bevel_height*2, 0, 0])
-				rotate([0, -90, 0]) side_and_bottom_frame_piece_extension();
-		}
-		// minus the back piece where the wall would be, since there is no wall and the pieces and panels
-		// go flush against one another
-		translate([0, frame_y/2-(frame_wall/2), 0]) cube([frame_x*2, frame_wall, frame_z], center=true);
-	}
-}
-
-extra_extended_left_or_right_frame_piece();
--- a/src/extras/bss-ae/interconnect-x.scad
+++ b/src/extras/bss-ae/interconnect-x.scad
@ -1,30 +0,0 @@
-/* Interconnect frames along the x-axis (the longer side)
- *
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <frames/pieces/front-or-back.scad>
-
-module interconnect_frame_half_piece() {
-	translate([0, frame_y/2-frame_wall, 0]) difference() {
-		front_or_back_frame_piece();
-		translate([0, (-frame_y+frame_wall)/2-panel_overhang_amount, 0])
-			cube([overhang_panel_x, frame_wall+panel_overhang_amount*2, frame_z], center=true);
-	}
-}
-
-module interconnect_frame_piece() {
-	difference() {
-		union() {
-			// slight translate is to make this a 2-manifold in OpenSCAD
-			translate([0, -0.01, 0]) interconnect_frame_half_piece();
-			mirror([0, 1, 0]) interconnect_frame_half_piece();
-		}
-		rotate([0, 0, 90]) translate([-frame_y/2, 0, 0]) frame_cable_routing_hole();
-	}
-}
-
-interconnect_frame_piece();
--- a/src/extras/bss-ae/mount-spacer.scad
+++ b/src/extras/bss-ae/mount-spacer.scad
@ -1,17 +0,0 @@
-/* Just a simple washer to go between the frame post and the arcade enclosure.
- *
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-
-module mount_spacer() {
-	difference() {
-		cylinder(r=25, h=1.25, $fn=50, center=true);
-		m6_hole();
-	}
-}
-
-mount_spacer();
--- a/src/extras/bss-ae/panel-front-left-mount.scad
+++ b/src/extras/bss-ae/panel-front-left-mount.scad
@ -1,24 +0,0 @@
-/* A panel with a mount point for the front left of the enclosure.
- *
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <panels/inset/panel.scad>
-
-// X: inner post to post (inclusive) is approx. 428.625mm, so half that, minus half the post itself
-// (41.28mm) is how much in from a normal panel to put the M6 mounting hole
-// Y: eyeballed it to 2": 50.80mm
-mount_hole_x = (panel_x / 2) - (panel_x - ((428.625 / 2) - (41.28 / 2)));
-mount_hole_y = (panel_y / 2) - 50.80;
-
-module front_left_mount_panel() {
-	difference() {
-		panel();
-		translate([-mount_hole_x, -mount_hole_y, 0]) m6_hole();
-	}
-}
-
-front_left_mount_panel();
--- a/src/extras/bss-ae/panel-front-right-mount.scad
+++ b/src/extras/bss-ae/panel-front-right-mount.scad
@ -1,14 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <panel-front-left-mount.scad>
-
-module front_right_mount_panel() {
-	mirror([1, 0, 0]) front_left_mount_panel();
-}
-
-front_right_mount_panel();
--- a/src/extras/bss-ae/panel-three-aux-buttons-and-rocker-hole.scad
+++ b/src/extras/bss-ae/panel-three-aux-buttons-and-rocker-hole.scad
@ -1,18 +0,0 @@
-/* A panel for mounting a couple aux buttons in a out of the way spot.
- *
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-
-module three_aux_button_and_20mm_panel() {
-	difference() {
-		panel();
-		translate([0, -70, 0]) aux_control_three_button_tight_cluster();
-		translate([0, frame_y/2-30, 0]) rotate([180, 0, 0]) neutrik_d_mount();
-	}
-}
-
-three_aux_button_and_20mm_panel();
--- a/src/extras/bss-ae/panel-three-aux-buttons.scad
+++ b/src/extras/bss-ae/panel-three-aux-buttons.scad
@ -1,17 +0,0 @@
-/* A panel for mounting a couple aux buttons in a out of the way spot.
- *
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-
-module three_aux_button_panel() {
-	difference() {
-		panel();
-		translate([0, -70, 0]) aux_control_three_button_tight_cluster();
-	}
-}
-
-three_aux_button_panel();
--- a/src/frames/pieces/box/front-or-back-aux-and-neutrik.scad
+++ b/src/frames/pieces/box/front-or-back-aux-and-neutrik.scad
@ -7,9 +7,9 @@ include <parameters.scad>
 include <components.scad>
 use <front-or-back.scad>

-module front_or_back_aux_and_neutrik_frame_piece() {
+module front_or_back_aux_and_neutrik_box_frame_piece() {
 	difference() {
-		front_or_back_frame_piece();
+		front_or_back_box_frame_piece();

 		// aux button holes
 		translate([-35.25, -101.5, 0]) rotate([90, 0, 0]) aux_control_three_button_cluster();
@ -25,4 +25,4 @@ module front_or_back_aux_and_neutrik_frame_piece() {
 	}
 }

-front_or_back_aux_and_neutrik_frame_piece();
+front_or_back_aux_and_neutrik_box_frame_piece();
--- a/src/frames/pieces/box/front-or-back-inner-wall.scad
+++ b/src/frames/pieces/box/front-or-back-inner-wall.scad
@ -0,0 +1,31 @@
+/* The inner top/bottom wall of the frame, for being displayed through a windowed part.
+ *
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <front-or-back.scad>
+
+module mount_column_cutout() {
+	intersection() {
+		frame_mount_column();
+		cube([frame_mount_column_width*3/2, frame_mount_column_width*3/2, inner_frame_z*5/8], center=true);
+	}
+}
+
+module front_or_back_inner_wall_frame_piece() {
+	difference() {
+		front_or_back_box_frame_piece();
+		// minus the outer wall
+		translate([0, -(frame_y-frame_wall)/2, 0]) cube([frame_x, frame_wall, frame_z], center=true);
+		// minus half of the mounting posts (the other half provided by the outer wall)
+		translate([-panel_to_frame_point_x, -(panel_to_frame_point_y), 0]) rotate([0, 0, 180])
+			mount_column_cutout();
+		translate([panel_to_frame_point_x, -(panel_to_frame_point_y), 0]) rotate([0, 0, 270])
+			mount_column_cutout();
+	}
+}
+
+front_or_back_inner_wall_frame_piece();
--- a/src/frames/pieces/box/front-or-back-windowed-backslashes.scad
+++ b/src/frames/pieces/box/front-or-back-windowed-backslashes.scad
@ -0,0 +1,31 @@
+/*
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <front-or-back.scad>
+use <front-or-back-inner-wall.scad>
+
+module backslashes() {
+	translate([-60, -(frame_y-frame_wall)/2, 0]) slash_cutout();
+	translate([-40, -(frame_y-frame_wall)/2, 0]) slash_cutout();
+	translate([-20, -(frame_y-frame_wall)/2, 0]) slash_cutout();
+	translate([0, -(frame_y-frame_wall)/2, 0]) slash_cutout();
+	translate([20, -(frame_y-frame_wall)/2, 0]) slash_cutout();
+	translate([40, -(frame_y-frame_wall)/2, 0]) slash_cutout();
+	translate([60, -(frame_y-frame_wall)/2, 0]) slash_cutout();
+}
+
+module backslashes_windowed_front_or_back_box_frame_piece() {
+	difference() {
+		front_or_back_box_frame_piece();
+		// subtract slashes from the frame wall
+		backslashes();
+		// subtract the inner wall area that will be provided by the other piece
+		front_or_back_inner_wall_frame_piece();
+	}
+}
+
+backslashes_windowed_front_or_back_box_frame_piece();
--- a/src/frames/pieces/box/front-or-back-windowed-forwardslashes.scad
+++ b/src/frames/pieces/box/front-or-back-windowed-forwardslashes.scad
@ -9,9 +9,9 @@ use <front-or-back.scad>
 use <front-or-back-inner-wall.scad>
 use <front-or-back-windowed-backslashes.scad>

-module forwardslashes_windowed_front_or_back_frame_piece() {
+module forwardslashes_windowed_front_or_back_box_frame_piece() {
 	difference() {
-		front_or_back_frame_piece();
+		front_or_back_box_frame_piece();
 		// subtract slashes from the frame wall
 		mirror([0, 0, 1]) backslashes();
 		// subtract the inner wall area that will be provided by the other piece
@ -19,12 +19,4 @@ module forwardslashes_windowed_front_or_back_frame_piece() {
 	}
 }

-module forwardslashes_windowed_front_or_back_frame_piece_for_extended_side() {
-	difference() {
-		forwardslashes_windowed_front_or_back_frame_piece();
-		// ...minus the frame wall and lip on the left
-		translate([-frame_x/2+frame_wall/2, 0, 0]) cube([frame_wall, frame_y, frame_z], center=true);
-	}
-}
-
-forwardslashes_windowed_front_or_back_frame_piece_for_extended_side();
+forwardslashes_windowed_front_or_back_box_frame_piece();
--- a/src/frames/pieces/box/front-or-back-windowed-horiz-stripes.scad
+++ b/src/frames/pieces/box/front-or-back-windowed-horiz-stripes.scad
@ -0,0 +1,29 @@
+/*
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <front-or-back.scad>
+use <front-or-back-inner-wall.scad>
+
+module front_stripe() {
+	cube([frame_x-(frame_mount_column_width*1.75)*2, frame_wall, 6], center=true);
+}
+
+module windowed_front_or_back_box_frame_piece() {
+	difference() {
+		front_or_back_box_frame_piece();
+		// subtract frame wall windows
+		translate([0, -(frame_y-frame_wall)/2, 18]) front_stripe();
+		translate([0, -(frame_y-frame_wall)/2, 9]) front_stripe();
+		translate([0, -(frame_y-frame_wall)/2, 0]) front_stripe();
+		translate([0, -(frame_y-frame_wall)/2, -9]) front_stripe();
+		translate([0, -(frame_y-frame_wall)/2, -18]) front_stripe();
+		// subtract the inner wall area that will be provided by the other piece
+		front_or_back_inner_wall_frame_piece();
+	}
+}
+
+windowed_front_or_back_box_frame_piece();
--- a/src/frames/pieces/box/front-or-back-windowed.scad
+++ b/src/frames/pieces/box/front-or-back-windowed.scad
@ -0,0 +1,23 @@
+/*
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <front-or-back.scad>
+use <front-or-back-inner-wall.scad>
+
+module windowed_front_or_back_box_frame_piece() {
+	difference() {
+		front_or_back_box_frame_piece();
+		// subtract frame wall window
+		translate([0, -frame_y/2, 0])
+			cube([frame_x-frame_mount_column_width*3.5, (frame_wall+panel_support_width)*2,
+				frame_z-panel_z*3], center=true);
+		// subtract the inner wall area that will be provided by the other piece
+		front_or_back_inner_wall_frame_piece();
+	}
+}
+
+windowed_front_or_back_box_frame_piece();
--- a/src/frames/pieces/box/front-or-back.scad
+++ b/src/frames/pieces/box/front-or-back.scad
@ -6,20 +6,25 @@
 include <parameters.scad>
 include <components.scad>
 use <frames/complete/left-frame.scad>
-use <side.scad>

-module front_or_back_frame_piece() {
+module front_or_back_box_frame_piece() {
 	piece_width = panel_support_width+frame_wall+frame_mount_column_width;
 	intersection() {
 		left_frame();
 		difference() {
 			// include the whole bottom wall (including mount columns)
-			translate([0, -(frame_y/2)+(piece_width/2), 0])
-				cube([frame_piece_x_x, piece_width, frame_z], center=true);
+			translate([0, -(frame_y/2)+(piece_width/2), 0]) cube([frame_x, piece_width, frame_z], center=true);
+			// ...minus the frame wall and lip on the left
+			translate([-frame_x/2+frame_wall/2, 0, 0])
+				cube([frame_wall, frame_y-frame_wall*2, frame_z], center=true);
+			linear_extrude(height=frame_z, center=true) polygon([
+				[-frame_x/2, -frame_y/2], [-frame_x/2+frame_wall, -frame_y/2+frame_wall],
+				[-frame_x/2, -frame_y/2+frame_wall]
+			]);
 			// ...minus a slot for the combining piece to go into
 			cube([frame_x, frame_y-(panel_support_width+frame_wall)*2, inner_frame_z/3], center=true);
 		}
 	}
 }

-front_or_back_frame_piece();
+front_or_back_box_frame_piece();
--- a/src/frames/pieces/box/side-inner-wall.scad
+++ b/src/frames/pieces/box/side-inner-wall.scad
@ -15,10 +15,9 @@ module mount_column_cutout() {
 	}
 }

-module side_inner_wall_frame_base_piece() {
+module side_inner_wall_frame_piece() {
 	difference() {
-		// Z is scaled so that some part of the original part inner wall is retained
-		scale([1, 1, inner_frame_z_decorative_scale]) side_frame_piece();
+		side_box_frame_piece();
 		// minus the outer wall
 		translate([-(frame_x-frame_wall)/2, 0, 0]) cube([frame_wall, frame_y, frame_z], center=true);
 		// minus half of the mounting posts (the other half provided by the outer wall)
@ -33,11 +32,4 @@ module side_inner_wall_frame_base_piece() {
 	}
 }

-module side_inner_wall_frame_piece() {
-	side_inner_wall_frame_base_piece();
-	// extend the outward face 2mm in order to have it cut deeper into the frame outer wall
-	translate([-(frame_x-frame_wall)/2, 0, 0]) rotate([0, 90, 0]) linear_extrude(height=2) projection()
-		translate([0, 0, 50]) rotate([0, -90, 0]) side_inner_wall_frame_base_piece();
-}
-
 side_inner_wall_frame_piece();
--- a/src/frames/pieces/box/side-windowed-backslashes.scad
+++ b/src/frames/pieces/box/side-windowed-backslashes.scad
@ -0,0 +1,29 @@
+/*
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <side.scad>
+use <side-inner-wall.scad>
+
+module backslashes() {
+	translate([-(frame_x-frame_wall)/2, -40, 0]) rotate([0, 0, -90]) slash_cutout();
+	translate([-(frame_x-frame_wall)/2, -20, 0]) rotate([0, 0, -90]) slash_cutout();
+	translate([-(frame_x-frame_wall)/2, 0, 0]) rotate([0, 0, -90]) slash_cutout();
+	translate([-(frame_x-frame_wall)/2, 20, 0]) rotate([0, 0, -90]) slash_cutout();
+	translate([-(frame_x-frame_wall)/2, 40, 0]) rotate([0, 0, -90]) slash_cutout();
+}
+
+module backslashes_windowed_side_box_frame_piece() {
+	difference() {
+		side_box_frame_piece();
+		// subtract slashes from the frame wall
+		backslashes();
+		// subtract the inner wall area that will be provided by the other piece
+		side_inner_wall_frame_piece();
+	}
+}
+
+backslashes_windowed_side_box_frame_piece();
--- a/src/frames/pieces/box/side-windowed-forwardslashes.scad
+++ b/src/frames/pieces/box/side-windowed-forwardslashes.scad
@ -9,9 +9,9 @@ use <side.scad>
 use <side-inner-wall.scad>
 use <side-windowed-backslashes.scad>

-module forwardslashes_windowed_side_frame_piece() {
+module forwardslashes_windowed_side_box_frame_piece() {
 	difference() {
-		side_frame_piece();
+		side_box_frame_piece();
 		// subtract slashes from the frame wall
 		mirror([0, 0, 1]) backslashes();
 		// subtract the inner wall area that will be provided by the other piece
@ -19,4 +19,4 @@ module forwardslashes_windowed_side_frame_piece() {
 	}
 }

-forwardslashes_windowed_side_frame_piece();
+forwardslashes_windowed_side_box_frame_piece();
--- a/src/frames/pieces/box/side-windowed-horiz-stripes.scad
+++ b/src/frames/pieces/box/side-windowed-horiz-stripes.scad
@ -0,0 +1,29 @@
+/*
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <side.scad>
+use <side-inner-wall.scad>
+
+module side_stripe() {
+	cube([frame_wall, frame_y-(frame_mount_column_width*1.75)*2, 6], center=true);
+}
+
+module windowed_side_box_frame_piece() {
+	difference() {
+		side_box_frame_piece();
+		// subtract frame wall windows
+		translate([-(frame_x-frame_wall)/2, 0, 18]) side_stripe();
+		translate([-(frame_x-frame_wall)/2, 0, 9]) side_stripe();
+		translate([-(frame_x-frame_wall)/2, 0, 0]) side_stripe();
+		translate([-(frame_x-frame_wall)/2, 0, -9]) side_stripe();
+		translate([-(frame_x-frame_wall)/2, 0, -18]) side_stripe();
+		// subtract the inner wall area that will be provided by the other piece
+		side_inner_wall_frame_piece();
+	}
+}
+
+windowed_side_box_frame_piece();
--- a/src/frames/pieces/box/side-windowed.scad
+++ b/src/frames/pieces/box/side-windowed.scad
@ -8,9 +8,9 @@ include <components.scad>
 use <side.scad>
 use <side-inner-wall.scad>

-module windowed_side_frame_piece() {
+module windowed_side_box_frame_piece() {
 	difference() {
-		side_frame_piece();
+		side_box_frame_piece();
 		// subtract frame wall window
 		translate([-frame_x/2, 0, 0])
 			cube([(frame_wall+panel_support_width)*2, frame_y-frame_mount_column_width*3.5,
@ -20,4 +20,4 @@ module windowed_side_frame_piece() {
 	}
 }

-windowed_side_frame_piece();
+windowed_side_box_frame_piece();
--- a/src/frames/pieces/box/side.scad
+++ b/src/frames/pieces/box/side.scad
@ -0,0 +1,23 @@
+/*
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <front-or-back.scad>
+
+module side_box_frame_piece() {
+	piece_width = panel_support_width+frame_wall+frame_mount_column_width;
+	difference() {
+		// side piece is left/right agnostic
+		frame();
+		// minus the top and bottom
+		front_or_back_box_frame_piece();
+		rotate([180, 0, 0]) front_or_back_box_frame_piece();
+		// and just chop out the rest of the frame
+		translate([piece_width, 0, 0]) cube([frame_x, frame_y+1, frame_z+1], center=true);
+	}
+}
+
+side_box_frame_piece();
--- a/src/frames/pieces/extended/front-or-back-clean-for-extended-side-aux-and-neutrik.scad
+++ b/src/frames/pieces/extended/front-or-back-clean-for-extended-side-aux-and-neutrik.scad
@ -0,0 +1,28 @@
+/*
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <front-or-back-clean-for-extended-side.scad>
+
+module front_or_back_aux_and_neutrik_box_frame_piece_for_extended_side() {
+	difference() {
+		front_or_back_box_frame_piece_for_extended_side();
+
+		// aux button holes
+		translate([-35.25, -101.5, 0]) rotate([90, 0, 0]) aux_control_three_button_cluster();
+		translate([-35.25, -(frame_y/2)+neutrik_panel_thickness+4, 0]) frame_cutout();
+		translate([-72.25, -(frame_y/2)+neutrik_panel_thickness+4, 0]) frame_cutout();
+		translate([2, -(frame_y/2)+neutrik_panel_thickness+4, 0]) frame_cutout();
+
+		// neutrix button hole
+		translate([frame_center_to_neutrik, -(frame_y/2)+neutrik_panel_thickness, 0])
+			rotate([270, 0, 0]) neutrik_d_mount();
+		translate([frame_center_to_neutrik, -(frame_y/2)+neutrik_panel_thickness+4, 0])
+			frame_cutout();
+	}
+}
+
+front_or_back_aux_and_neutrik_box_frame_piece_for_extended_side();
--- a/src/frames/pieces/extended/front-or-back-clean-for-extended-side.scad
+++ b/src/frames/pieces/extended/front-or-back-clean-for-extended-side.scad
@ -0,0 +1,18 @@
+/*
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <frames/pieces/box/front-or-back.scad>
+
+module front_or_back_box_frame_piece_for_extended_side() {
+	difference() {
+		front_or_back_box_frame_piece();
+		// ...minus the frame wall and lip on the left
+		translate([-frame_x/2+frame_wall/2, 0, 0]) cube([frame_wall, frame_y, frame_z], center=true);
+	}
+}
+
+front_or_back_box_frame_piece_for_extended_side();
--- a/src/frames/pieces/front-or-back-trapezoid.scad
+++ b/src/frames/pieces/front-or-back-trapezoid.scad
@ -5,11 +5,11 @@

 include <parameters.scad>
 include <components.scad>
-use <front-or-back.scad>
+use <front-or-back-clean-for-extended-side.scad>

 module clean_front_or_back() {
 	difference() {
-		front_or_back_frame_piece();
+		front_or_back_box_frame_piece_for_extended_side();
 		// chop off the lip we left on the basic piece
 		translate([-frame_x/2+frame_wall/2, 0, 0]) cube([frame_wall, frame_y, frame_z], center=true);
 	};
@ -29,9 +29,9 @@ module bottom_piece_extension() {
 	}
 }

-module front_or_back_trapezoid_frame_piece() {
+module extended_front_or_back_frame_piece() {
 	clean_front_or_back();
 	translate([0, -frame_y/2+frame_wall, 0]) rotate([90, 0, 0]) bottom_piece_extension();
 }

-front_or_back_trapezoid_frame_piece();
+extended_front_or_back_frame_piece();
--- a/src/frames/pieces/side-trapezoid-extended-to-front-trapezoid.scad
+++ b/src/frames/pieces/side-trapezoid-extended-to-front-trapezoid.scad
@ -6,8 +6,8 @@
 include <parameters.scad>
 include <components.scad>
 use <frames/complete/left-frame.scad>
-use <side.scad>
-use <front-or-back-trapezoid.scad>
+use <frames/pieces/box/side.scad>
+use <front-or-back.scad>

 module side_and_bottom_frame_piece_wall() {
 	// get a slice of the pieces, to use it in extruding
@ -26,13 +26,13 @@ module side_and_bottom_frame_piece_extension() {
 	}
 }

-module side_trapezoid_extended_to_front_frame_piece() {
+module extra_extended_left_or_right_frame_piece() {
 	difference() {
-		side_frame_piece();
+		side_box_frame_piece();
 		// chop off the old edge which is getting replaced with the extension
 		translate([-frame_x/2+frame_bevel_height/2, 0, 0]) cube([frame_bevel_height, frame_y, frame_z], center=true);
 	}
 	translate([-frame_x/2+frame_bevel_height*2, 0, 0]) rotate([0, -90, 0]) side_and_bottom_frame_piece_extension();
 }

-side_trapezoid_extended_to_front_frame_piece();
+extra_extended_left_or_right_frame_piece();
--- a/src/frames/pieces/side-trapezoid.scad
+++ b/src/frames/pieces/side-trapezoid.scad
@ -6,7 +6,8 @@
 include <parameters.scad>
 include <components.scad>
 use <frames/complete/left-frame.scad>
-use <side.scad>
+use <frames/pieces/box/side.scad>
+use <front-or-back-clean-for-extended-side.scad>

 module side_frame_piece_wall() {
 	// get a slice of the piece, to use it in extruding
@ -24,13 +25,13 @@ module side_frame_piece_extension() {
 	}
 }

-module side_trapezoid_frame_piece() {
+module extended_bottom_left_or_right_frame_piece() {
 	difference() {
-		side_frame_piece();
+		side_box_frame_piece();
 		// chop off the old edge which is getting replaced with the extension
 		translate([-frame_x/2+frame_bevel_height/2, 0, 0]) cube([frame_bevel_height, frame_y, frame_z], center=true);
 	}
 	translate([-frame_x/2+frame_bevel_height*2, 0, 0]) rotate([0, -90, 0]) side_frame_piece_extension();
 }

-side_trapezoid_frame_piece();
+extended_bottom_left_or_right_frame_piece();
--- a/src/frames/pieces/front-or-back-inner-wall-for-horiz-stripes.scad
+++ b/src/frames/pieces/front-or-back-inner-wall-for-horiz-stripes.scad
@ -1,31 +0,0 @@
-/* The inner top/bottom wall of the frame, for being displayed through a horizontal stripe windowed part.
- *
- * SPDX-FileCopyrightText: © 2025 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <front-or-back-inner-wall.scad>
-use <front-or-back-windowed-horiz-stripes.scad>
-
-// for stability's sake, this piece juts out a bit from the outside of the wall, so we
-// need to hack the window piece a bit to subtract from the longer and get ours longer
-module horiz_striped_windowed_front_or_back_frame_piece() {
-	difference() {
-		front_or_back_longish_frame_piece();
-		// subtract frame wall windows
-		front_horiz_stripes();
-		// subtract the inner wall area that will be provided by the other piece
-		front_or_back_inner_wall_frame_piece();
-	}
-}
-
-module front_or_back_windowed_horiz_stripes_inner_wall_frame_piece() {
-	difference() {
-		front_or_back_longish_frame_piece();
-		horiz_striped_windowed_front_or_back_frame_piece();
-	}
-}
-
-front_or_back_windowed_horiz_stripes_inner_wall_frame_piece();
--- a/src/frames/pieces/front-or-back-inner-wall.scad
+++ b/src/frames/pieces/front-or-back-inner-wall.scad
@ -1,65 +0,0 @@
-/* The inner top/bottom wall of the frame, for being displayed through a windowed part.
- *
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <front-or-back.scad>
-
-module mount_column_cutout() {
-	intersection() {
-		frame_mount_column();
-		cube([frame_mount_column_width*3/2, frame_mount_column_width*3/2, inner_frame_z*5/8], center=true);
-	}
-}
-
-module front_or_back_inner_wall_frame_base_piece() {
-	difference() {
-		// Z is scaled so that some part of the original part inner wall is retained
-		scale([1, 1, inner_frame_z_decorative_scale]) front_or_back_frame_piece();
-		// minus the outer wall
-		translate([0, -(frame_y-frame_wall)/2, 0]) cube([frame_x, frame_wall, frame_z], center=true);
-		// minus half of the mounting posts (the other half provided by the outer wall)
-		translate([-panel_to_frame_point_x, -(panel_to_frame_point_y), 0]) rotate([0, 0, 180])
-			mount_column_cutout();
-		translate([panel_to_frame_point_x, -(panel_to_frame_point_y), 0]) rotate([0, 0, 270])
-			mount_column_cutout();
-	}
-}
-
-module front_or_back_inner_wall_frame_piece() {
-	front_or_back_inner_wall_frame_base_piece();
-	// extend the outward face 2mm in order to have it cut deeper into the frame outer wall
-	translate([0, -(frame_y-frame_wall)/2, 0]) rotate([-90, 0, 0]) linear_extrude(height=2) projection()
-		translate([0, 0, 50]) rotate([90, 0, 0]) front_or_back_inner_wall_frame_base_piece();
-}
-
-// this is here for use in inner wall pieces, but unlike the side longish piece (in its own
-// .scad), front_or_back_longish_frame_piece is not printable so we'll just stash it here
-module front_or_back_frame_piece_wall() {
-       // get a slice of the whole wall, to use it for making the extended version
-       difference() {
-               front_or_back_frame_piece();
-               cube([frame_x, frame_y-frame_wall*2, frame_z], center=true);
-       }
-}
-
-// this is here for use in inner wall pieces, but unlike the side longish piece (in its own
-// .scad), front_or_back_longish_frame_piece is not printable so we'll just stash it here
-module front_or_back_frame_piece_extension() {
-	hull() {
-		front_or_back_frame_piece_wall();
-		translate([0, -frame_bevel_height*2, 0]) front_or_back_frame_piece_wall();
-	}
-}
-
-// this is here for use in inner wall pieces, but unlike the side longish piece (in its own
-// .scad), front_or_back_longish_frame_piece is not printable so we'll just stash it here
-module front_or_back_longish_frame_piece() {
-	front_or_back_frame_piece_extension();
-	front_or_back_frame_piece();
-}
-
-front_or_back_inner_wall_frame_piece();
--- a/src/frames/pieces/front-or-back-windowed-backslashes.scad
+++ b/src/frames/pieces/front-or-back-windowed-backslashes.scad
@ -1,40 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <front-or-back.scad>
-use <front-or-back-inner-wall.scad>
-
-module backslashes() {
-	translate([-70, -(frame_y-frame_wall)/2, 0]) slash_cutout();
-	translate([-50, -(frame_y-frame_wall)/2, 0]) slash_cutout();
-	translate([-30, -(frame_y-frame_wall)/2, 0]) slash_cutout();
-	translate([-10, -(frame_y-frame_wall)/2, 0]) slash_cutout();
-	translate([10, -(frame_y-frame_wall)/2, 0]) slash_cutout();
-	translate([30, -(frame_y-frame_wall)/2, 0]) slash_cutout();
-	translate([50, -(frame_y-frame_wall)/2, 0]) slash_cutout();
-	translate([70, -(frame_y-frame_wall)/2, 0]) slash_cutout();
-}
-
-module backslashes_windowed_front_or_back_frame_piece() {
-	difference() {
-		front_or_back_frame_piece();
-		// subtract slashes from the frame wall
-		backslashes();
-		// subtract the inner wall area that will be provided by the other piece
-		front_or_back_inner_wall_frame_piece();
-	}
-}
-
-module backslashes_windowed_front_or_back_frame_piece_for_extended_side() {
-	difference() {
-		backslashes_windowed_front_or_back_frame_piece();
-		// ...minus the frame wall and lip on the left
-		translate([-frame_x/2+frame_wall/2, 0, 0]) cube([frame_wall, frame_y, frame_z], center=true);
-	}
-}
-
-backslashes_windowed_front_or_back_frame_piece_for_extended_side();
--- a/src/frames/pieces/front-or-back-windowed-horiz-stripes.scad
+++ b/src/frames/pieces/front-or-back-windowed-horiz-stripes.scad
@ -1,33 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <front-or-back.scad>
-use <front-or-back-inner-wall.scad>
-
-module front_horiz_stripe() {
-	cube([frame_x-(frame_mount_column_width*1.75)*2, wall_cutout_depth, 5], center=true);
-}
-
-module front_horiz_stripes() {
-	translate([0, -(frame_y-frame_wall)/2, 18]) front_horiz_stripe();
-	translate([0, -(frame_y-frame_wall)/2, 9]) front_horiz_stripe();
-	translate([0, -(frame_y-frame_wall)/2, 0]) front_horiz_stripe();
-	translate([0, -(frame_y-frame_wall)/2, -9]) front_horiz_stripe();
-	translate([0, -(frame_y-frame_wall)/2, -18]) front_horiz_stripe();
-}
-
-module horiz_striped_windowed_front_or_back_frame_piece() {
-	difference() {
-		front_or_back_frame_piece();
-		// subtract frame wall windows
-		front_horiz_stripes();
-		// subtract the inner wall area that will be provided by the other piece
-		front_or_back_inner_wall_frame_piece();
-	}
-}
-
-horiz_striped_windowed_front_or_back_frame_piece();
--- a/src/frames/pieces/front-or-back-windowed.scad
+++ b/src/frames/pieces/front-or-back-windowed.scad
@ -1,35 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <front-or-back.scad>
-use <front-or-back-inner-wall.scad>
-
-module front_or_back_window() {
-	translate([0, -frame_y/2, 0])
-		cube([frame_x-frame_mount_column_width*3.5, (frame_wall+panel_support_width)*2,
-			frame_z-panel_z*3], center=true);
-}
-
-module windowed_front_or_back_frame_piece() {
-	difference() {
-		front_or_back_frame_piece();
-		// subtract frame wall window
-		front_or_back_window();
-		// subtract the inner wall area that will be provided by the other piece
-		front_or_back_inner_wall_frame_piece();
-	}
-}
-
-module windowed_front_or_back_frame_piece_for_extended_side() {
-	difference() {
-		windowed_front_or_back_frame_piece();
-		// ...minus the frame wall and lip on the left
-		translate([-frame_x/2+frame_wall/2, 0, 0]) cube([frame_wall, frame_y, frame_z], center=true);
-	}
-}
-
-windowed_front_or_back_frame_piece_for_extended_side();
--- a/src/frames/pieces/interconnect.scad
+++ b/src/frames/pieces/interconnect.scad
@ -5,11 +5,11 @@

 include <parameters.scad>
 include <components.scad>
-use <side.scad>
+use <box/side.scad>

 module interconnect_frame_half_piece() {
 	translate([frame_x/2-frame_wall, 0, 0]) difference() {
-		side_frame_piece();
+		side_box_frame_piece();
 		rotate([0, 0, 180]) side_chopper();
 	}
 }
--- a/src/frames/pieces/side-inner-wall-for-horiz-stripes.scad
+++ b/src/frames/pieces/side-inner-wall-for-horiz-stripes.scad
@ -1,32 +0,0 @@
-/* The inner side wall of the frame, for being displayed through a horizontal stripe windowed part.
- *
- * SPDX-FileCopyrightText: © 2025 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <side-inner-wall.scad>
-use <side-longish.scad>
-use <side-windowed-horiz-stripes.scad>
-
-// for stability's sake, this piece juts out a bit from the outside of the wall, so we
-// need to hack the window piece a bit to subtract from the longer and get ours longer
-module horiz_striped_windowed_side_frame_piece() {
-	difference() {
-		side_longish_frame_piece();
-		// subtract frame wall windows
-		side_horiz_stripes();
-		// subtract the inner wall area that will be provided by the other piece
-		side_inner_wall_frame_piece();
-	}
-}
-
-module side_windowed_horiz_stripes_inner_wall_frame_piece() {
-	difference() {
-		side_longish_frame_piece();
-		horiz_striped_windowed_side_frame_piece();
-	}
-}
-
-side_windowed_horiz_stripes_inner_wall_frame_piece();
--- a/src/frames/pieces/side-longish.scad
+++ b/src/frames/pieces/side-longish.scad
@ -1,32 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <side.scad>
-
-module side_frame_piece_wall() {
-	// get a slice of the whole wall, to use it for making the extended version
-	difference() {
-		side_frame_piece();
-		cube([frame_x-frame_wall*2, frame_y, frame_z], center=true);
-	}
-}
-
-module side_frame_piece_extension() {
-	// hulling the two walls provides a wall with a thicker x
-	hull() {
-		side_frame_piece_wall();
-		translate([-frame_bevel_height*2, 0, 0]) side_frame_piece_wall();
-	}
-}
-
-module side_longish_frame_piece() {
-	// combine the wider wall and the original piece
-	side_frame_piece_extension();
-	side_frame_piece();
-}
-
-side_longish_frame_piece();
--- a/src/frames/pieces/side-windowed-backslashes.scad
+++ b/src/frames/pieces/side-windowed-backslashes.scad
@ -1,30 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <side.scad>
-use <side-inner-wall.scad>
-
-module backslashes() {
-	translate([-(frame_x-frame_wall)/2, -50, 0]) rotate([0, 0, -90]) slash_cutout();
-	translate([-(frame_x-frame_wall)/2, -30, 0]) rotate([0, 0, -90]) slash_cutout();
-	translate([-(frame_x-frame_wall)/2, -10, 0]) rotate([0, 0, -90]) slash_cutout();
-	translate([-(frame_x-frame_wall)/2, 10, 0]) rotate([0, 0, -90]) slash_cutout();
-	translate([-(frame_x-frame_wall)/2, 30, 0]) rotate([0, 0, -90]) slash_cutout();
-	translate([-(frame_x-frame_wall)/2, 50, 0]) rotate([0, 0, -90]) slash_cutout();
-}
-
-module backslashes_windowed_side_frame_piece() {
-	difference() {
-		side_frame_piece();
-		// subtract slashes from the frame wall
-		backslashes();
-		// subtract the inner wall area that will be provided by the other piece
-		side_inner_wall_frame_piece();
-	}
-}
-
-backslashes_windowed_side_frame_piece();
--- a/src/frames/pieces/side-windowed-horiz-stripes.scad
+++ b/src/frames/pieces/side-windowed-horiz-stripes.scad
@ -1,33 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <side.scad>
-use <side-inner-wall.scad>
-
-module side_horiz_stripe() {
-	cube([wall_cutout_depth, frame_y-(frame_mount_column_width*1.75)*2, 5], center=true);
-}
-
-module side_horiz_stripes() {
-	translate([-(frame_x-frame_wall)/2, 0, 18]) side_horiz_stripe();
-	translate([-(frame_x-frame_wall)/2, 0, 9]) side_horiz_stripe();
-	translate([-(frame_x-frame_wall)/2, 0, 0]) side_horiz_stripe();
-	translate([-(frame_x-frame_wall)/2, 0, -9]) side_horiz_stripe();
-	translate([-(frame_x-frame_wall)/2, 0, -18]) side_horiz_stripe();
-}
-
-module horiz_striped_windowed_side_frame_piece() {
-	difference() {
-		side_frame_piece();
-		// subtract frame wall windows
-		side_horiz_stripes();
-		// subtract the inner wall area that will be provided by the other piece
-		side_inner_wall_frame_piece();
-	}
-}
-
-horiz_striped_windowed_side_frame_piece();
--- a/src/frames/pieces/side.scad
+++ b/src/frames/pieces/side.scad
@ -1,26 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <frames/complete/left-frame.scad>
-use <front-or-back.scad>
-
-module side_frame_piece() {
-	piece_width = panel_support_width+frame_wall+frame_mount_column_width;
-	difference() {
-		intersection() {
-			left_frame();
-			// include the whole left wall (including mount columns)
-			translate([-(frame_x/2)+(piece_width/2), 0, 0])
-				cube([piece_width, frame_piece_y_y, frame_z], center=true);
-		}
-		// minus the top and bottom
-		front_or_back_frame_piece();
-		rotate([180, 0, 0]) front_or_back_frame_piece();
-	}
-}
-
-side_frame_piece();
--- a/src/misc/decorative-corner.scad
+++ b/src/misc/decorative-corner.scad
@ -1,31 +0,0 @@
-/* A bit of plastic to put on the corners of a case, just for more flair and seam hiding.
- *
- * Note: this only works on the standard side and front/back pieces, not the longish/extended pieces.
- *
- * SPDX-FileCopyrightText: © 2025 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-
-module decorative_corner() {
-	deco_thickness = 2;
-	difference() {
-		// start with the frame shape itself, just grown a bit
-		resize(newsize=[frame_x+(deco_thickness*2), frame_y+(deco_thickness*2), frame_z+(deco_thickness*2)])
-			frame_solid();
-		// lob off the pieces to make a corner
-		translate([(panel_to_frame_point_offset+deco_thickness*2)*1.5, 0, 0])
-			cube([frame_x, frame_y*2, frame_z*2], center=true);
-		translate([0, (panel_to_frame_point_offset+deco_thickness*2)*1.5, 0])
-			cube([frame_x*2, frame_y, frame_z*2], center=true);
-		// carve out the inside
-		frame_solid();
-		// holes for bolts
-		translate([0, 0, frame_z/2]) panel_holes();
-		translate([0, 0, -frame_z/2]) rotate([0, 180, 0]) panel_holes();
-	}
-}
-
-decorative_corner();
--- a/src/misc/decorative-middle.scad
+++ b/src/misc/decorative-middle.scad
@ -1,36 +0,0 @@
-/* A bit of plastic to put on the center of a case front, just for more flair and seam hiding.
- *
- * SPDX-FileCopyrightText: © 2025 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-
-module decorative_half_middle() {
-	deco_thickness = 2;
-	translate([-frame_x/2+frame_wall, 0, 0]) difference() {
-		// start with the frame shape itself, just grown a bit
-		resize(newsize=[frame_x+(deco_thickness*2), frame_y+(deco_thickness*2), frame_z+(deco_thickness*2)])
-			frame_solid();
-		// make this appropriate for the middle
-		scale([1, 1, 2]) side_chopper();
-		// lob off the pieces to make a cornerish piece
-		translate([-(panel_to_frame_point_offset+deco_thickness*2)*1.65, 0, 0])
-			cube([frame_x, frame_y*2, frame_z*2], center=true);
-		translate([0, (panel_to_frame_point_offset+deco_thickness*2)*1.5, 0])
-			cube([frame_x*2, frame_y, frame_z*2], center=true);
-		// carve out the inside
-		frame_solid();
-		// holes for bolts
-		translate([0, 0, frame_z/2]) panel_holes();
-		translate([0, 0, -frame_z/2]) rotate([0, 180, 0]) panel_holes();
-	}
-}
-
-module decorative_middle() {
-	decorative_half_middle();
-	mirror([1, 0, 0]) decorative_half_middle();
-}
-
-decorative_middle();
--- a/src/misc/decorative-plate-24mm-button.scad
+++ b/src/misc/decorative-plate-24mm-button.scad
@ -4,13 +4,12 @@
 */

 include <parameters.scad>
-decorative_radius_scale = 1.5;
 include <components.scad>

 module button_24mm_decorative_plate() {
 	difference() {
-		// get a 2mm slice of the decorative button cylinders
-		translate([0, 0, -50]) button_24mm_hole();
+		// get a 2mm slice of the bigger button cylinders
+		translate([0, 0, -55]) button_24mm_hole();
 		translate([0, 0, -100]) cube([500, 500, 198], center=true);
 		translate([0, 0, 100]) cube([500, 500, 198], center=true);
 		// cut out the normal holes
--- a/src/misc/decorative-plate-dir_arc-plus-w-24mm-8-button.scad
+++ b/src/misc/decorative-plate-dir_arc-plus-w-24mm-8-button.scad
@ -8,8 +8,8 @@ include <components.scad>

 module dir_arc_plus_w_24mm_8_button_decorative_plate() {
 	difference() {
-		// get a 2mm slice of the decorative button cylinders
-		translate([0, 0, -50]) dir_arc_plus_w_24mm_8_button();
+		// get a 2mm slice of the bigger button cylinders
+		translate([0, 0, -55]) dir_arc_plus_w_24mm_8_button();
 		translate([0, 0, -100]) cube([500, 500, 198], center=true);
 		translate([0, 0, 100]) cube([500, 500, 198], center=true);
 		// cut out the normal holes
--- a/src/misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-nine-rectangles.scad
+++ b/src/misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-nine-rectangles.scad
@ -1,35 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-decorative_radius_scale = 1.5;
-include <components.scad>
-
-module dir_arc_plus_w_30mm_and_sega_2p_nine_decorative_plate_of_plates() {
-	difference() {
-		// layout offset + 30 = width for layout plus button width + 19+3 = space around button
-		left_plate_x = dir_arc_30mm_column_3_offset + 30 + 19;
-		// layout offset + 30 = width for layout plus button width + 19+3 = space around button
-		left_plate_y = dir_arc_w_30mm_row_4_offset + 30 + 19;
-		left_plate_center_x = (left_plate_x + sega_2p_column_1_left_panel_edge_offset - 22)/2;
-		// layout offset + 30 = width for layout plus button width + 19+3 = space around button
-		right_plate_x = sega_2p_column_4_offset + 30 + 19;
-		right_plate_center_x = (right_plate_x + sega_2p_column_1_left_panel_edge_offset - 22)/2;
-
-		union() {
-			// y values are based on the other half below
-			translate([right_plate_center_x, 15, 0]) linear_extrude(2) offset(r=3, $fn=100)
-				square([right_plate_x, left_plate_y], center=true);
-			translate([-left_plate_center_x, 15, 0]) linear_extrude(2) offset(r=3, $fn=100)
-				square([left_plate_x, left_plate_y], center=true);
-			/* translate([-50, 0, 0]) cube([200, 200, 2], center=true); */
-		}
-		// cut out the normal holes
-		translate([-panel_x/2, 0, -1]) dir_arc_w_30mm();
-		translate([panel_x/2, 0, -1]) sega_2p_nine();
-	}
-}
-
-dir_arc_plus_w_30mm_and_sega_2p_nine_decorative_plate_of_plates();
--- a/src/misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-nine-superplate.scad
+++ b/src/misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-nine-superplate.scad
@ -1,34 +0,0 @@
-/* decorative plate for directional and action buttons.
- *
- * SPDX-FileCopyrightText: © 2025 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-decorative_radius_scale = 1.5;
-include <components.scad>
-
-module dir_arc_plus_w_30mm_and_sega_2p_nine_decorative_superplate() {
-	difference() {
-		union() {
-			hull() difference() {
-				// get a 2mm slice of the decorative button cylinders
-				union() {
-					translate([-panel_x/2, 0, -50]) dir_arc_w_30mm();
-					translate([panel_x/2, 0, -50]) sega_2p_nine();
-					// customized position to make a top point even with the
-					// top of the dir_arc_w_30mm piece, because it being
-					// at an angle otherwise looks silly IMO
-					translate([panel_x*23/32, 26.6, -50]) sega_2p_p1();
-				}
-				translate([0, 0, -100]) cube([500, 500, 198], center=true);
-				translate([0, 0, 100]) cube([500, 500, 198], center=true);
-			}
-		}
-		// cut out the normal holes
-		translate([-panel_x/2, 0, -1]) dir_arc_w_30mm();
-		translate([panel_x/2, 0, -1]) sega_2p_nine();
-	}
-}
-
-dir_arc_plus_w_30mm_and_sega_2p_nine_decorative_superplate();
--- a/src/misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one-plates.scad
+++ b/src/misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one-plates.scad
@ -0,0 +1,26 @@
+/*
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+decorative_radius_scale = 1.5;
+jumbo_decorative_radius_scale = 0;
+include <components.scad>
+
+module dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate_of_plates() {
+	difference() {
+		// get a 2mm slice of the bigger button cylinders
+		union() {
+			translate([-panel_x/2, 0, -25]) hull() dir_arc_w_30mm();
+			translate([panel_x/2, 0, -25]) hull() sega_2p_plus_one();
+		}
+		translate([0, 0, -100]) cube([500, 500, 198], center=true);
+		translate([0, 0, 100]) cube([500, 500, 198], center=true);
+		// cut out the normal holes
+		translate([-panel_x/2, 0, -1]) dir_arc_w_30mm();
+		translate([panel_x/2, 0, -1]) sega_2p_plus_one();
+	}
+}
+
+dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate_of_plates();
--- a/src/misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one.scad
+++ b/src/misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one.scad
@ -6,19 +6,19 @@
 include <parameters.scad>
 include <components.scad>

-module dir_arc_plus_w_30mm_and_sega_2p_nine_decorative_plate() {
+module dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate() {
 	difference() {
-		// get a 2mm slice of the jumbo decorative button cylinders
+		// get a 2mm slice of the bigger button cylinders
 		union() {
-			translate([-panel_x/2, 0, -70]) dir_arc_w_30mm();
-			translate([panel_x/2, 0, -70]) sega_2p_nine();
+			translate([-panel_x/2, 0, -65]) dir_arc_w_30mm();
+			translate([panel_x/2, 0, -65]) sega_2p_plus_one();
 		}
 		translate([0, 0, -100]) cube([500, 500, 198], center=true);
 		translate([0, 0, 100]) cube([500, 500, 198], center=true);
 		// cut out the normal holes
 		translate([-panel_x/2, 0, -1]) dir_arc_w_30mm();
-		translate([panel_x/2, 0, -1]) sega_2p_nine();
+		translate([panel_x/2, 0, -1]) sega_2p_plus_one();
 	}
 }

-dir_arc_plus_w_30mm_and_sega_2p_nine_decorative_plate();
+dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate();
--- a/src/misc/decorative-plate-dir_arc-plus-w-30mm-plate.scad
+++ b/src/misc/decorative-plate-dir_arc-plus-w-30mm-plate.scad
@ -1,24 +0,0 @@
-/* Decorative plate for directional buttons.
- *
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-decorative_radius_scale = 1.5;
-include <components.scad>
-
-module dir_arc_plus_w_30mm_plate_decorative_plate() {
-	difference() {
-		hull() difference() {
-			// get a 2mm slice of the decorative button cylinders
-			translate([-panel_x/2, 0, -50]) dir_arc_w_30mm();
-			translate([0, 0, -100]) cube([500, 500, 198], center=true);
-			translate([0, 0, 100]) cube([500, 500, 198], center=true);
-		}
-		// cut out the normal holes
-		translate([-panel_x/2, 0, -1]) dir_arc_w_30mm();
-	}
-}
-
-dir_arc_plus_w_30mm_plate_decorative_plate();
--- a/src/misc/decorative-plate-dir_arc-plus-w-30mm.scad
+++ b/src/misc/decorative-plate-dir_arc-plus-w-30mm.scad
@ -8,8 +8,8 @@ include <components.scad>

 module dir_arc_plus_w_30mm_decorative_plate() {
 	difference() {
-		// get a 2mm slice of the decorative button cylinders
-		translate([0, 0, -50]) dir_arc_w_30mm();
+		// get a 2mm slice of the bigger button cylinders
+		translate([0, 0, -55]) dir_arc_w_30mm();
 		translate([0, 0, -100]) cube([500, 500, 198], center=true);
 		translate([0, 0, 100]) cube([500, 500, 198], center=true);
 		// cut out the normal holes
--- a/src/misc/decorative-plate-ergo-wasd-five-30mm-and-ergo-nine-30mm.scad
+++ b/src/misc/decorative-plate-ergo-wasd-five-30mm-and-ergo-nine-30mm.scad
@ -1,24 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2025 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-
-module ergo_wasd_five_30mm_and_ergo_nine_30mm_decorative_plate() {
-	difference() {
-		// get a 2mm slice of the jumbo decorative button cylinders
-		union() {
-			translate([-panel_x/2, 0, -70]) mirror([1, 0, 0]) ergo_wasd_five_30mm();
-			translate([panel_x/2, 0, -70]) ergo_nine_30mm();
-		}
-		translate([0, 0, -100]) cube([500, 500, 198], center=true);
-		translate([0, 0, 100]) cube([500, 500, 198], center=true);
-		// cut out the normal holes
-		translate([-panel_x/2, 0, -1]) mirror([1, 0, 0]) ergo_wasd_five_30mm();
-		translate([panel_x/2, 0, -1]) ergo_nine_30mm();
-	}
-}
-
-ergo_wasd_five_30mm_and_ergo_nine_30mm_decorative_plate();
--- a/src/misc/decorative-plate-sega-2p-6-button.scad
+++ b/src/misc/decorative-plate-sega-2p-6-button.scad
@ -8,8 +8,8 @@ include <components.scad>

 module sega_2p_6_button_decorative_plate() {
 	difference() {
-		// get a 2mm slice of the decorative button cylinders
-		translate([0, 0, -50]) sega_2p_6_button();
+		// get a 2mm slice of the bigger button cylinders
+		translate([0, 0, -55]) sega_2p_6_button();
 		translate([0, 0, -100]) cube([500, 500, 198], center=true);
 		translate([0, 0, 100]) cube([500, 500, 198], center=true);
 		// cut out the normal holes
--- a/src/misc/decorative-plate-sega-2p-eleven-plate.scad
+++ b/src/misc/decorative-plate-sega-2p-eleven-plate.scad
@ -1,24 +0,0 @@
-/* Decorative plate for directional buttons.
- *
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-decorative_radius_scale = 1.5;
-include <components.scad>
-
-module sega_2p_eleven_plate_decorative_plate() {
-	difference() {
-		hull() difference() {
-			// get a 2mm slice of the decorative button cylinders
-			translate([panel_x/2, 0, -50]) sega_2p_eleven();
-			translate([0, 0, -100]) cube([500, 500, 198], center=true);
-			translate([0, 0, 100]) cube([500, 500, 198], center=true);
-		}
-		// cut out the normal holes
-		translate([panel_x/2, 0, -1]) sega_2p_eleven();
-	}
-}
-
-sega_2p_eleven_plate_decorative_plate();
--- a/src/misc/decorative-plate-sega-2p-nine-plate.scad
+++ b/src/misc/decorative-plate-sega-2p-nine-plate.scad
@ -1,24 +0,0 @@
-/* A rounded corner decorative plate for the Sega 2P + 1 button layout.
- *
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-decorative_radius_scale = 1.5;
-include <components.scad>
-
-module sega_2p_nine_decorative_plate() {
-	difference() {
-		hull() difference() {
-			// get a 2mm slice of the decorative button cylinders
-			translate([panel_x/2, 0, -50]) sega_2p_nine();
-			translate([0, 0, -100]) cube([500, 500, 198], center=true);
-			translate([0, 0, 100]) cube([500, 500, 198], center=true);
-		}
-		// cut out the normal holes
-		translate([panel_x/2, 0, -1]) sega_2p_nine();
-	}
-}
-
-sega_2p_nine_decorative_plate();
--- a/src/misc/decorative-plate-sega-2p-plus-one.scad
+++ b/src/misc/decorative-plate-sega-2p-plus-one.scad
@ -6,15 +6,15 @@
 include <parameters.scad>
 include <components.scad>

-module sega_2p_nine_decorative_plate() {
+module sega_2p_plus_one_decorative_plate() {
 	difference() {
-		// get a 2mm slice of the decorative button cylinders
-		translate([0, 0, -50]) sega_2p_nine();
+		// get a 2mm slice of the bigger button cylinders
+		translate([0, 0, -55]) sega_2p_plus_one();
 		translate([0, 0, -100]) cube([500, 500, 198], center=true);
 		translate([0, 0, 100]) cube([500, 500, 198], center=true);
 		// cut out the normal holes
-		translate([0, 0, -1]) sega_2p_nine();
+		translate([0, 0, -1]) sega_2p_plus_one();
 	}
 }

-sega_2p_nine_decorative_plate();
+sega_2p_plus_one_decorative_plate();
--- a/src/misc/decorative-plate-sega-2p.scad
+++ b/src/misc/decorative-plate-sega-2p.scad
@ -1,21 +0,0 @@
-/* A decorative plate for the Sega 2P layout.
- *
- * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-
-module sega_2p_decorative_plate() {
-	difference() {
-		// get a 2mm slice of the decorative button cylinders
-		translate([0, 0, -50]) sega_2p();
-		translate([0, 0, -100]) cube([500, 500, 198], center=true);
-		translate([0, 0, 100]) cube([500, 500, 198], center=true);
-		// cut out the normal holes
-		translate([0, 0, -1]) sega_2p();
-	}
-}
-
-sega_2p_decorative_plate();
--- a/src/misc/dustwasher-jlf.scad
+++ b/src/misc/dustwasher-jlf.scad
@ -8,9 +8,9 @@ include <components.scad>

 module jlf_dustwasher() {
 	difference() {
-		cylinder(r=jlf_dustwasher_radius, h=2, $fn=100, center=true);
-		cylinder(r1=jlf_shaft_inner_radius, r2=jlf_shaft_inner_radius+shaft_position_tolerance,
-			h=2.001, $fn=100, center=true);
+		cylinder(r=lever_plate_hole*decorative_radius_scale, h=2, $fn=50, center=true);
+		// 5.25 = 4.55 (diameter of shaft is 9.10mm) + .25 to let it take an angle
+		cylinder(r=4.8, h=2.1, $fn=50, center=true);
 	}
 }

--- a/src/misc/dustwasher-lsx-nobi.scad
+++ b/src/misc/dustwasher-lsx-nobi.scad
@ -8,9 +8,9 @@ include <components.scad>

 module lsx_nobi_dustwasher() {
 	difference() {
-		cylinder(r=lsx_nobi_dustwasher_radius, h=2, $fn=100, center=true);
-		cylinder(r1=lsx_nobi_shaft_inner_radius, r2=lsx_nobi_shaft_inner_radius+shaft_position_tolerance,
-			h=2.001, $fn=100, center=true);
+		cylinder(r=lever_plate_hole*decorative_radius_scale, h=2, $fn=50, center=true);
+		// 5.25 = 5 (diameter of shaft is 10mm) + .25 to let it take an angle
+		cylinder(r=5.25+hole_tolerance, h=2.1, $fn=50, center=true);
 	}
 }

--- a/src/misc/m4-hex-spacer-sleeve.scad
+++ b/src/misc/m4-hex-spacer-sleeve.scad
@ -1,24 +0,0 @@
-/* Wrap a smaller width hex spacer with plastic to get it to fit in our standard post hole.
- *
- * Since the hex spacers can vary in width, you may have to adjust the inner dimensions
- * to make this work right for your piece, but this worked right for mine. YMMV.
- *
- * SPDX-FileCopyrightText: © 2025 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-include <parameters.scad>
-include <components.scad>
-
-module small_m4_hole() {
-	scale([1, 1, 2]) cylinder(r=3.25, h=frame_z, $fn=6, center=true);
-}
-
-module m4_hex_spacer_sleeve() {
-	difference() {
-		resize([0, 0, 45]) frame_hex_bolt_hole();
-		small_m4_hole();
-	}
-}
-
-
-m4_hex_spacer_sleeve();
--- a/src/panels/inset/dir_arc-plus-w-30mm-panel.scad
+++ b/src/panels/inset/dir_arc-plus-w-30mm-panel.scad
@ -1,16 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-
-module dir_arc_w_30mm_panel() {
-	difference() {
-		panel();
-		dir_arc_w_30mm();
-	}
-}
-
-dir_arc_w_30mm_panel();
--- a/src/panels/inset/ergo-nine-plus-aux-button-with-mount.scad
+++ b/src/panels/inset/ergo-nine-plus-aux-button-with-mount.scad
@ -1,15 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2025 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <ergo-nine-plus-aux-button.scad>
-
-module ergo_nine_plus_aux_button_panel_with_mount() {
-	ergo_nine_plus_aux_button_panel();
-	translate([20, -50, -(panel_z/2) - 3]) pcb_mount();
-}
-
-ergo_nine_plus_aux_button_panel_with_mount();
--- a/src/panels/inset/ergo-nine-plus-aux-button.scad
+++ b/src/panels/inset/ergo-nine-plus-aux-button.scad
@ -1,17 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2025 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-
-module ergo_nine_plus_aux_button_panel() {
-	difference() {
-		panel();
-		ergo_nine_30mm();
-		translate([89, 30, 0]) button_24mm_hole();
-	}
-}
-
-ergo_nine_plus_aux_button_panel();
--- a/src/panels/inset/lever-and-dir_arc-plus-w-30mm-panel-with-oled.scad
+++ b/src/panels/inset/lever-and-dir_arc-plus-w-30mm-panel-with-oled.scad
@ -1,18 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <lever-and-dir_arc-plus-w-30mm-panel.scad>
-
-module lever_and_dir_arc_w_30mm_panel_with_oled() {
-	difference() {
-		lever_and_dir_arc_w_30mm_panel();
-		translate([0, -(panel_y/2 - 22), 0]) adafruit_pid_326_oled_ssd1306_mount_cutout();
-	}
-	translate([0, -(panel_y/2 - 22), 0]) adafruit_pid_326_oled_ssd1306_mount();
-}
-
-lever_and_dir_arc_w_30mm_panel_with_oled();
--- a/src/panels/inset/lever-and-ergo-wasd-five-panel-with-oled.scad
+++ b/src/panels/inset/lever-and-ergo-wasd-five-panel-with-oled.scad
@ -1,18 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2025 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <lever-and-ergo-wasd-five-panel.scad>
-
-module lever_and_ergo_wasd_five_panel_with_oled() {
-	difference() {
-		lever_and_ergo_wasd_five_panel();
-		translate([0, -(panel_y/2 - 22), 0]) adafruit_pid_326_oled_ssd1306_mount_cutout();
-	}
-	translate([0, -(panel_y/2 - 22), 0]) adafruit_pid_326_oled_ssd1306_mount();
-}
-
-lever_and_ergo_wasd_five_panel_with_oled();
--- a/src/panels/inset/lever-and-ergo-wasd-five-panel.scad
+++ b/src/panels/inset/lever-and-ergo-wasd-five-panel.scad
@ -1,18 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2025 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-
-module lever_and_ergo_wasd_five_panel() {
-	difference() {
-		panel();
-		mirror([1, 0, 0]) ergo_wasd_five_30mm();
-		translate([(-panel_x/2)+55, (panel_y/2)-75, 0]) levermountholes();
-		translate([(-panel_x/2)+55, (panel_y/2)-75, 0]) levermountcountersinks();
-	}
-}
-
-lever_and_ergo_wasd_five_panel();
--- a/src/panels/inset/lever-and-sega-2p-6-button-panel-with-aux-with-mount.scad
+++ b/src/panels/inset/lever-and-sega-2p-6-button-panel-with-aux-with-mount.scad
@ -1,25 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-
-module lever_and_sega_2p_6_button_panel_with_aux_with_mount() {
-	difference() {
-		union() {
-			panel();
-			translate([45, -58, -panel_z/2]) rotate([0, 0, 13]) pcb_mount();
-		}
-		translate([90, -25, 0]) sega_2p_6_button();
-		translate([-65, 5, 0]) union() {
-			levermountholes();
-			levermountcountersinks();
-		}
-		translate([17, 70, 0]) button_24mm_hole();
-		translate([-17, 70, 0]) button_24mm_hole();
-	}
-}
-
-lever_and_sega_2p_6_button_panel_with_aux_with_mount();
--- a/src/panels/inset/namco-noir-plus-one-panel.scad
+++ b/src/panels/inset/namco-noir-plus-one-panel.scad
--- a/src/panels/inset/sega-2p-eleven-panel-with-mount.scad
+++ b/src/panels/inset/sega-2p-eleven-panel-with-mount.scad
@ -1,16 +0,0 @@
-/* 11-button Sega 2P panel with PCB mount
- *
- * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <sega-2p-eleven-panel.scad>
-
-module sega_2p_eleven_panel_with_mount() {
-	sega_2p_eleven_panel();
-	translate([20, -50, -(panel_z/2) - 3]) pcb_mount();
-}
-
-sega_2p_eleven_panel_with_mount();
--- a/src/panels/inset/sega-2p-eleven-panel.scad
+++ b/src/panels/inset/sega-2p-eleven-panel.scad
@ -1,17 +0,0 @@
-/* A panel with the Sega 2P button layout plus three extra buttons for whatever purpose.
- *
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-
-module sega_2p_eleven_panel() {
-	difference() {
-		panel();
-		sega_2p_eleven();
-	}
-}
-
-sega_2p_eleven_panel();
--- a/src/panels/inset/sega-2p-nine-plus-aux-button-with-mount.scad
+++ b/src/panels/inset/sega-2p-nine-plus-aux-button-with-mount.scad
@ -1,15 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <sega-2p-nine-plus-aux-button.scad>
-
-module sega_2p_nine_plus_aux_button_with_mount() {
-	sega_2p_nine_plus_aux_button();
-	translate([20, -50, -(panel_z/2) - 3]) pcb_mount();
-}
-
-sega_2p_nine_plus_aux_button_with_mount();
--- a/src/panels/inset/sega-2p-panel.scad
+++ b/src/panels/inset/sega-2p-panel.scad
@ -1,17 +0,0 @@
-/* A top panel in the very popular Sega 2P layout.
- *
- * SPDX-FileCopyrightText: © 2025 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-
-module sega_2p_panel() {
-	difference() {
-		panel();
-		sega_2p();
-	}
-}
-
-sega_2p_panel();
--- a/src/panels/inset/sega-2p-plus-one-panel.scad
+++ b/src/panels/inset/sega-2p-plus-one-panel.scad
@ -6,11 +6,11 @@
 include <parameters.scad>
 include <components.scad>

-module sega_2p_nine_panel() {
+module sega_2p_plus_one_panel() {
 	difference() {
 		panel();
-		sega_2p_nine();
+		sega_2p_plus_one();
 	}
 }

-sega_2p_nine_panel();
+sega_2p_plus_one_panel();
--- a/src/panels/inset/sega-2p-plus-one-plus-control-panel-with-mount.scad
+++ b/src/panels/inset/sega-2p-plus-one-plus-control-panel-with-mount.scad
@ -0,0 +1,15 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <sega-2p-plus-one-plus-control-panel.scad>
+
+module sega_2p_plus_one_plus_control_panel_with_mount() {
+	sega_2p_plus_one_plus_control_panel();
+	translate([30, -50, -(panel_z/2) - 3]) pcb_mount();
+}
+
+sega_2p_plus_one_plus_control_panel_with_mount();
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Brian S. Stephan	d4217405e1	TEMP build123d framework stuff part 2 Signed-off-by: Brian S. Stephan <bss@incorporeal.org>	2024-07-05 17:23:11 -05:00
Brian S. Stephan	0dcd1cb5ff	TEMP build123d extremely basic panel demo Signed-off-by: Brian S. Stephan <bss@incorporeal.org>	2024-07-05 17:21:57 -05:00
Brian S. Stephan	e63a5da6a2	TEMP build123d framework stuff and test layout Signed-off-by: Brian S. Stephan <bss@incorporeal.org>	2024-07-04 21:58:43 -05:00
Brian S. Stephan	82d914c30c	TEMP build123d environment part 1 Signed-off-by: Brian S. Stephan <bss@incorporeal.org>	2024-07-02 10:24:13 -05:00
				`@ -0,0 +1 @@`
				`"""The Buildable Stick System, code to generate arcade stick components."""`