CHANGELOG.md

@@ -2,25 +2,6 @@
 
 Included is a summary of changes to the project, by version. Details can be found in the commit history.
 
-## v4.4.3
-
-### Features
-
-* Windowed frame wall pieces were made for the "clean" front/back walls that line up with the extended sides.
-
-### Improvements
-
-* The inner wall piece has been thickened, bringing its surface closer to the end of the outer wall windowed frame
-  pieces, making the window less deep and the inner wall easier to see.
-* The inner wall piece has been shrunken on the Z in order to leave some material on the outer wall and thus improve the
-  friction fit and clamp of the outer wall piece, which was too weakened by the unsupported top and bottom otherwise.
-
-### Miscellaneous
-
-* Documentation updates, especially around the printing of parts.
-* Corrected the names of some pieces that were accidentally duplicated from the file they were copied from rather than
-  what they were, or otherwise didn't match the standard pattern (such as it is).
-
 ## v4.4.2
 
 ### Bugfixes

src/frames/pieces/box/front-or-back-inner-wall.scad

@@ -17,8 +17,7 @@ module mount_column_cutout() {
 
 module front_or_back_inner_wall_frame_base_piece() {
 	difference() {
-		// Z is scaled so that some part of the original part inner wall is retained
-		scale([1, 1, inner_frame_z_decorative_scale]) front_or_back_box_frame_piece();
+		front_or_back_box_frame_piece();
 		// minus the outer wall
 		translate([0, -(frame_y-frame_wall)/2, 0]) cube([frame_x, frame_wall, frame_z], center=true);
 		// minus half of the mounting posts (the other half provided by the outer wall)

src/frames/pieces/box/side-inner-wall.scad

@@ -17,8 +17,7 @@ module mount_column_cutout() {
 
 module side_inner_wall_frame_base_piece() {
 	difference() {
-		// Z is scaled so that some part of the original part inner wall is retained
-		scale([1, 1, inner_frame_z_decorative_scale]) side_box_frame_piece();
+		side_box_frame_piece();
 		// minus the outer wall
 		translate([-(frame_x-frame_wall)/2, 0, 0]) cube([frame_wall, frame_y, frame_z], center=true);
 		// minus half of the mounting posts (the other half provided by the outer wall)

src/parameters.scad

@@ -75,12 +75,6 @@ panel_z = 5;
 // inside the frame
 inner_frame_z = frame_z - (panel_z * 2);
 
-// "windowed" pieces chop out the inner wall of the frame as a separate piece in order
-// to print it a different color/way/style. to improve friction fit, it is only the below
-// value scale of the whole wall, so that the rest of the wall is retained on the outer
-// piece, which helps clamp the two together (and helps the panels clamp it all)
-inner_frame_z_decorative_scale = 0.95;
-
 // how much the top plate x/y is expanded to overhang the frame
 // note that this is relative to the top plate (so the wall is added back)
 panel_overhang_amount = 8.5;