bss
/
buildable-stick-system
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 4 Wiki Activity
171 Commits 1 Branch 16 Tags 6.6 MiB
Commit Graph

171 Commits

Author SHA1 Message Date
Brian S. Stephan a960e57bd1
docs updates for v3 2023-09-17 11:33:49 -05:00
Brian S. Stephan c67722d0da
simple button outline for a single 24mm button 2023-09-17 11:29:31 -05:00
Brian S. Stephan fa1f6927c5
new demo for v3 --- two panels 2023-09-17 11:28:56 -05:00
Brian S. Stephan 1da14d6dc3
remove stuff taken care of, bump engraving down again 2023-09-15 15:32:24 -05:00
Brian S. Stephan 0611e23975
keep some notes on filament while I'm at it 2023-09-15 15:30:10 -05:00
Brian S. Stephan 87db45df15
complete the cost estimation: total ~$26 for an enclosure 2023-09-15 15:20:17 -05:00
Brian S. Stephan 28809230bc
sega 2p panel with a button for start or whatever 2023-09-15 15:03:49 -05:00
Brian S. Stephan 2253889430
remove unnecessary difference/union duplication 2023-09-15 15:01:39 -05:00
Brian S. Stephan a26f87a9d2
fit an arcade layout in one panel 2023-09-13 21:17:45 -05:00
Brian S. Stephan 962402c291
new top panels for my current two-frame experiment 
seems good so far
 2023-09-13 20:46:00 -05:00
Brian S. Stephan 63c7113d9f
more notes for next time 2023-09-12 23:52:32 -05:00
Brian S. Stephan 163dfc2c63
commit my new target assembly 2023-09-12 23:51:37 -05:00
Brian S. Stephan aa633584e5
don't mirror, mostly duplicate the left frame components into right frame 
doing a naive mirror meant the neutrik D mount holes were in the wrong
spot. fine for a 20mm + plate mount, but not good for any actual
component
 2023-09-12 23:40:51 -05:00
Brian S. Stephan 767b38acef
more TODO notes 2023-09-12 23:40:48 -05:00
Brian S. Stephan 56367369b7
more panel estimates 2023-09-12 20:19:43 -05:00
Brian S. Stephan fa304606df
generalize the top panel cost, they should all come in around this 2023-09-12 17:09:30 -05:00
Brian S. Stephan 5d5eb34f8a
top panel cost for something like the lever + dir_arc panel 2023-09-12 13:03:35 -05:00
Brian S. Stephan 17ab4815a6
more cost estimate documentation 2023-09-12 10:36:15 -05:00
Brian S. Stephan afd548f8d9
correct hardware notes, since v2 the M4 standoffs are 45mm 2023-09-12 10:14:45 -05:00
Brian S. Stephan e2549694ea
start estimating cost of build 2023-09-12 09:24:33 -05:00
Brian S. Stephan 2aab029905
use the same frame cutout for neutrik D and 24mm holes 2023-09-11 20:34:09 -05:00
Brian S. Stephan 0f11aacec4
un-rotate the solo frame now that X is longer 2023-09-11 20:28:33 -05:00
Brian S. Stephan 3f0712af70
try making the frame wider than it is deep 
the goal is to try to fit a hitstick-w into two frames
 2023-09-11 13:29:40 -05:00
Brian S. Stephan 51ba220a5a
refer to proper parent filename 2023-09-11 12:01:27 -05:00
Brian S. Stephan 47d9a523c3
remove double translation of dir_arc-30mm layouts 2023-09-11 11:43:25 -05:00
Brian S. Stephan 3e74f3d915
refer to proper parent filename 2023-09-11 11:28:18 -05:00
Brian S. Stephan cfb48574b2
change 30mm dir_arc layouts to be based on the thumb position 
this will hopefully make some moving of stuff around a bit easier
 2023-09-11 11:25:59 -05:00
Brian S. Stephan 36a96fbe26
tighten up the inner hole a bit, to no noticeable detriment 2023-09-11 10:37:46 -05:00
Brian S. Stephan 86ba641ba6
modularize the directional arc part of the 24mm all buttons layout 
this was for a failed experiment, but it's probably good to do this
regardless
 2023-09-11 10:37:43 -05:00
Brian S. Stephan 3d24dad1ae
spread out the frame connection holes a bit 2023-09-11 09:56:52 -05:00
Brian S. Stephan fe961e8a7e
make neutrik D cutout bigger, simplifies that frame wall 2023-09-11 09:45:09 -05:00
Brian S. Stephan 28c0c0e475
properly and relatively position neutrik cutouts 2023-09-11 09:33:39 -05:00
Brian S. Stephan 2960151d98
remove more magic numbers, overhang relative to base frame stuff 2023-09-08 14:08:40 -05:00
Brian S. Stephan 82d1913551
remove more magic numbers, top plate is a derivative of base frame dimensions 2023-09-08 13:53:51 -05:00
Brian S. Stephan 88fc53988e
remove some magic numbers that are derived from base dimensions 2023-09-08 13:44:05 -05:00
Brian S. Stephan f73c94be2f
move the rotated top plate into something reusable 2023-09-08 13:17:04 -05:00
Brian S. Stephan cd21b4dd0a
remove unused import 2023-09-08 13:14:53 -05:00
Brian S. Stephan 7a71c8cd81
simple naming consistency change 
sed -i 's/topplate_with_raised/top_plate_with_raised/' **/*.scad
 2023-09-08 12:22:53 -05:00
Brian S. Stephan 350fc27285
break up the sega 2P layout into parts 
messing with something that may never see the light of day, but no harm
in doing this
 2023-09-08 12:15:46 -05:00
Brian S. Stephan 3b3b857568
build improvements, create zip file 2023-09-07 19:53:56 -05:00
Brian S. Stephan fddb5d450e
commit my scratch file since it's a good demo 2023-09-07 19:17:48 -05:00
Brian S. Stephan 0329dd2b3c
make dustwasher hole a bit bigger to let the lever move 2023-09-07 19:12:20 -05:00
Brian S. Stephan ee3dd23b36
another idea for next time 2023-09-07 11:02:00 -05:00
Brian S. Stephan 0e00f8d5d1
with the frame redesign, we can use 16mm M4s 2023-09-07 00:19:42 -05:00
Brian S. Stephan b911a1b7c1
three section v2 render 2023-09-06 16:24:58 -05:00
Brian S. Stephan ff19699d61
update TODO and README notes 
no known issues!
 2023-09-06 14:47:14 -05:00
Brian S. Stephan 8140d5e3a8
neutrik D base plate, also good as a cover 2023-09-06 14:44:54 -05:00
Brian S. Stephan 708122e510
dustwasher that fits the LSX-NOBI, maybe more 2023-09-06 11:30:52 -05:00
Brian S. Stephan b704f158db
start v3 TODO 2023-09-05 11:47:50 -05:00
Brian S. Stephan 5177090625
rename some misc files for consistency/sorting 2023-09-05 10:41:59 -05:00