diff --git a/src/components.scad b/src/components.scad
index 1e1a26f..cfa1160 100644
--- a/src/components.scad
+++ b/src/components.scad
@@ -57,6 +57,10 @@ panel_support_width = 5;
neutrik_d_screw_radius = 1.6 + hole_tolerance;
neutrik_d_radius = 12 + hole_tolerance;
+// additional button radius for decorative panels, etc.
+decorative_radius = 12;
+jumbo_decorative_radius = 15;
+
/* PARTS */
module m4_hole() {
@@ -88,6 +92,9 @@ module button_24mm_hole() {
// slagcoin has screw-in nut diameter at 29.5mm, so radius+6 to leave some space
// translation is to leave 3mm thickness in the plate without recentering anything
translate([0, 0, -25]) cylinder(r=small_button_radius+6, h=49, $fn=50, center=true);
+ // space for decorative button surround stuff
+ translate([0, 0, 50]) cylinder(r=small_button_radius+decorative_radius, h=20, $fn=50, center=true);
+ translate([0, 0, 70]) cylinder(r=small_button_radius+jumbo_decorative_radius, h=20, $fn=50, center=true);
}
// button hole, with extra wide bits for various uses (cutting out space
@@ -98,6 +105,9 @@ module button_30mm_hole() {
// slagcoin has screw-in nut diameter at 36mm, so radius+6 to leave some space
// translation is to leave 3mm thickness in the plate without recentering anything
translate([0, 0, -25]) cylinder(r=big_button_radius+6, h=49, $fn=50, center=true);
+ // space for decorative button surround stuff
+ translate([0, 0, 50]) cylinder(r=big_button_radius+decorative_radius, h=20, $fn=50, center=true);
+ translate([0, 0, 70]) cylinder(r=big_button_radius+jumbo_decorative_radius, h=20, $fn=50, center=true);
}
module frame_hex_bolt_hole() {
diff --git a/src/misc-dir_arc-plus-w-30mm-and-sega-2p-plus-one-decorative-plate.scad b/src/misc-dir_arc-plus-w-30mm-and-sega-2p-plus-one-decorative-plate.scad
new file mode 100644
index 0000000..1b7758a
--- /dev/null
+++ b/src/misc-dir_arc-plus-w-30mm-and-sega-2p-plus-one-decorative-plate.scad
@@ -0,0 +1,38 @@
+/* Copyright Brian Stephan 2023
+ *
+ * This file is part of the Buildable Stick System.
+ *
+ * The Buildable Stick System is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 3 of the License, or (at your
+ * option) any later version.
+ *
+ * The Buildable Stick System is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * the Buildable Stick System. If not, see .
+ */
+
+include
+
+module dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate() {
+ difference() {
+ // get a 1mm slice of the bigger button cylinders
+ union() {
+ translate([-top_plate_x/2, 0, -65]) dir_arc_w_30mm();
+ translate([top_plate_x/2, 0, -65]) sega_2p_plus_one();
+ }
+ translate([0, 0, -100]) cube([500, 500, 198], center=true);
+ translate([0, 0, 100]) cube([500, 500, 198], center=true);
+ // cut out the normal holes
+ translate([-top_plate_x/2, 0, -1]) dir_arc_w_30mm();
+ translate([top_plate_x/2, 0, -1]) sega_2p_plus_one();
+ }
+ /* // fill in some space */
+ /* translate([-6, -6, 0]) cube([23, 23, 1], center=true); */
+}
+
+dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate();
diff --git a/src/misc-dir_arc-plus-w-30mm-decorative-plate.scad b/src/misc-dir_arc-plus-w-30mm-decorative-plate.scad
new file mode 100644
index 0000000..3038e2a
--- /dev/null
+++ b/src/misc-dir_arc-plus-w-30mm-decorative-plate.scad
@@ -0,0 +1,32 @@
+/* Copyright Brian Stephan 2023
+ *
+ * This file is part of the Buildable Stick System.
+ *
+ * The Buildable Stick System is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 3 of the License, or (at your
+ * option) any later version.
+ *
+ * The Buildable Stick System is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * the Buildable Stick System. If not, see .
+ */
+
+include
+
+module dir_arc_plus_w_30mm_decorative_plate() {
+ difference() {
+ // get a 1mm slice of the bigger button cylinders
+ translate([0, 0, -45]) dir_arc_w_30mm();
+ translate([0, 0, -50]) cube([500, 500, 98], center=true);
+ translate([0, 0, 50]) cube([500, 500, 98], center=true);
+ // cut out the normal holes
+ translate([0, 0, -1]) dir_arc_w_30mm();
+ }
+}
+
+dir_arc_plus_w_30mm_decorative_plate();
diff --git a/src/misc-sega-2p-plus-one-decorative-plate.scad b/src/misc-sega-2p-plus-one-decorative-plate.scad
new file mode 100644
index 0000000..cf99fa6
--- /dev/null
+++ b/src/misc-sega-2p-plus-one-decorative-plate.scad
@@ -0,0 +1,33 @@
+/* Copyright Brian Stephan 2023
+ *
+ * This file is part of the Buildable Stick System.
+ *
+ * The Buildable Stick System is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 3 of the License, or (at your
+ * option) any later version.
+ *
+ * The Buildable Stick System is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * the Buildable Stick System. If not, see .
+ */
+
+include
+
+module sega_2p_plus_one_decorative_plate() {
+ difference() {
+ decorative_add=10;
+ // get a 1mm slice of the bigger button cylinders
+ translate([0, 0, -45]) sega_2p_plus_one();
+ translate([0, 0, -50]) cube([500, 500, 98], center=true);
+ translate([0, 0, 50]) cube([500, 500, 98], center=true);
+ // cut out the normal holes
+ translate([0, 0, -1]) sega_2p_plus_one();
+ }
+}
+
+sega_2p_plus_one_decorative_plate();