bss/buildable-stick-system
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 8 Wiki Activity

more documentation updates for the assembly, after renaming stuff

Browse Source 
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
This commit is contained in:
Brian S. Stephan 2024-06-21 09:07:46 -05:00
parent 92d3f9e6d5
commit de3914fa85
Signed by: bss
GPG Key ID: 3DE06D3180895FCB
1 changed files with 14 additions and 14 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

28
docs/assembly-and-tips.md
View File

@ -8,21 +8,21 @@ Assembly of a stick is pretty straightforward, but there are some choices that c
following is the most consistent way I've found to put one together. This is assuming a v4.2 or beyond stick, with two following is the most consistent way I've found to put one together. This is assuming a v4.2 or beyond stick, with two
panels to make a long standard stick, and the frame made of pieces. panels to make a long standard stick, and the frame made of pieces.
1. Prepare the frame top pieces --- `frame-piece-top-left-or-right`: this is your best shot to get auxillary buttons, 1. Prepare the frame top pieces: this is your best shot the e.g. Neutrik plates for the USB mount, SPDT switches, etc.
panel connectors, and the like installed, so do it now, and give them a good tighten. You shouldn't need to adjust installed, so do it now, and give them a good tighten. You shouldn't need to adjust these again, so finish their
these again, so finish their installation while the pieces are free. installation while the pieces are free.
1. This of course includes decorative plates --- e.g. `misc-decorative-plate-aux-control-three-button-cluster` --- 1. You could also do the decorative plates and top buttons, but it might be just as well to leave those for step 7,
you may choose to use. These are held to the top pieces by the buttons or component mounting screws. just to make sure the buttons don't get in the way of other buttons or a lever or so on.
2. Start the top panels --- `top-panel-(inset|overhang)-*`: you want both to get the components installed now 2. Start the top panels: you want both to get the components installed now when it's easy, and to make sure that the
when it's easy, and to make sure that the overall assembly works with your components, so again get your buttons, overall assembly works with your components, so again get your buttons, lever, etc., in place. You can secure them at
lever, etc., in place. You can secure them at this point. this point.
1. If you are using a button decorative plate that spans two panels --- e.g. 1. If you are using a button decorative plate that spans two panels --- e.g.
`src/misc-decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one` --- take care to align the two panels as `misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one` --- take care to align the two panels as tightly
tightly as possible, and accurately, as they will be hard to adjust once everything is secured and in the frame. as possible, and accurately, as they will be hard to adjust once everything is secured and in the frame.
2. If using a lever, don't forget the lever mount spacer --- `src/misc-lever-mount-sanwa-seimitsu` --- if you want 2. If using a lever, don't forget the lever mount spacer --- `misc/lever-mount-sanwa-seimitsu` --- if you want it,
it, and tighten those mounting bolts now as well. and tighten those mounting bolts now as well.
3. Create the frame box by combining your `frame-piece-*` parts together. This will be relatively stable just via 3. Create the frame box by combining your frame piece parts, box or extended, together. This will be relatively stable
friction fit. just via friction fit.
4. Rest the frame top-up on a desk, and put the standoffs through the holes. This will probably be tight, and you may 4. Rest the frame top-up on a desk, and put the standoffs through the holes. This will probably be tight, and you may
even need a rubber mallet or similar to drive the standoffs through the holes. even need a rubber mallet or similar to drive the standoffs through the holes.
5. Insert the top panels into the frame. 5. Insert the top panels into the frame.