Brian S. Stephan d70a2f90c6 remove the frame posts from panels, more trouble than they're worth ... the panels had posts that would drive into the frame column (the frame column needing to be a bit wider at the top and bottom accodringly). this was an attempt to assist the friction fit of the whole stick in tandem by having the panels contribute to the position and rigidity of the frame pieces. in practice I think this didn't really contribute anything major to that problem, and instead made the panels hard to connect, and way harder to remove, while also having a visual defect in that the panels were usually separated slightly due to having to fit exactly in the frame columns. this goes back to the old design where the base panel is a flat sheet and the frame column holes are uniform. everything seems nicer this way, and the overall build is simpler. Signed-off-by: Brian S. Stephan <bss@incorporeal.org>		2024-04-04 16:33:29 -05:00
..
blown-up-demo.scad	fix the blown up demo and update it for the docs	2024-02-22 13:40:01 -06:00
bottom-panel-inset.scad	rename bottom-panel.scad to -inset.scad for clarity's sake	2024-03-03 13:58:04 -06:00
bottom-panel-overhang-left.scad	fix imports of the overhang panels following renames	2024-02-12 20:17:18 -06:00
bottom-panel-overhang-middle.scad	fix imports of the overhang panels following renames	2024-02-12 20:17:18 -06:00
bottom-panel-overhang-right.scad	fix imports of the overhang panels following renames	2024-02-12 20:17:18 -06:00
bottom-panel-overhang-solo.scad	restore the inset tray to the bottom overhang panel	2024-03-03 14:03:31 -06:00
components.scad	remove the frame posts from panels, more trouble than they're worth	2024-04-04 16:33:29 -05:00
frame-left.scad	frames: re-bevel the bottom and top, center buttons	2024-03-01 10:01:50 -06:00
frame-middle.scad	frames: re-bevel the bottom and top, center buttons	2024-03-01 10:01:50 -06:00
frame-piece-bottom-left-or-right-extended.scad	add pieces vaguely like the TE1 sides as alternative frame sides	2024-03-07 19:15:31 -06:00
frame-piece-bottom-left-or-right.scad	move the "extra lip" to the side pieces instead of the top/bottom	2024-03-05 14:33:06 -06:00
frame-piece-interconnect.scad	modularize the frame into separate wall pieces	2024-03-03 18:33:55 -06:00
frame-piece-side-extended-to-bottom.scad	correct name of the extra extended side piece	2024-03-09 12:49:49 -06:00
frame-piece-side-extended.scad	add pieces vaguely like the TE1 sides as alternative frame sides	2024-03-07 19:15:31 -06:00
frame-piece-side.scad	modularize the frame into separate wall pieces	2024-03-03 18:33:55 -06:00
frame-piece-top-left-or-right.scad	dedupe top left and right frame pieces, they're the same shape	2024-04-03 18:00:58 -05:00
frame-right.scad	frames: re-bevel the bottom and top, center buttons	2024-03-01 10:01:50 -06:00
frame-solo.scad	frames: re-bevel the bottom and top, center buttons	2024-03-01 10:01:50 -06:00
misc-decorative-plate-24mm-button.scad	update SPDX headers in source files	2024-01-02 15:08:01 -06:00
misc-decorative-plate-aux-connectors-neutrik-and-rocker-cluster.scad	update SPDX headers in source files	2024-01-02 15:08:01 -06:00
misc-decorative-plate-aux-control-three-button-cluster.scad	fix an old math mistake with the spacing of 24mm aux buttons	2024-02-15 15:32:02 -06:00
misc-decorative-plate-dir_arc-plus-w-24mm-8-button.scad	update SPDX headers in source files	2024-01-02 15:08:01 -06:00
misc-decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one-plates.scad	better component/parameter names to match panel naming	2024-02-11 19:27:17 -06:00
misc-decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one.scad	better component/parameter names to match panel naming	2024-02-11 19:27:17 -06:00
misc-decorative-plate-dir_arc-plus-w-30mm.scad	update SPDX headers in source files	2024-01-02 15:08:01 -06:00
misc-decorative-plate-sega-2p-6-button.scad	update SPDX headers in source files	2024-01-02 15:08:01 -06:00
misc-decorative-plate-sega-2p-plus-one.scad	update SPDX headers in source files	2024-01-02 15:08:01 -06:00
misc-dustwasher-jlf.scad	update SPDX headers in source files	2024-01-02 15:08:01 -06:00
misc-dustwasher-lsx-nobi.scad	update SPDX headers in source files	2024-01-02 15:08:01 -06:00
misc-lever-mount-sanwa-seimitsu.scad	move the lever mount spacer out of the panels, into separate part	2024-02-22 13:40:01 -06:00
misc-neutrik-d-plate-24mm-hole.scad	update SPDX headers in source files	2024-01-02 15:08:01 -06:00
misc-neutrik-d-plate.scad	update SPDX headers in source files	2024-01-02 15:08:01 -06:00
misc-rocker-20mm-plate.scad	update SPDX headers in source files	2024-01-02 15:08:01 -06:00
parameters.scad	add pieces vaguely like the TE1 sides as alternative frame sides	2024-03-07 19:15:31 -06:00
top-panel-inset-dir_arc-plus-w-30mm-plus-one-with-mount.scad	better component/parameter names to match panel naming	2024-02-11 19:27:17 -06:00
top-panel-inset-dir_arc-plus-w-30mm-plus-one.scad	s/topplate/panel/ --- just better naming	2024-02-06 19:19:33 -06:00
top-panel-inset-lever-and-dir_arc-plus-w-30mm.scad	move the lever mount spacer out of the panels, into separate part	2024-02-22 13:40:01 -06:00
top-panel-inset-lever-with-mount.scad	better component/parameter names to match panel naming	2024-02-11 19:27:17 -06:00
top-panel-inset-lever.scad	move the lever mount spacer out of the panels, into separate part	2024-02-22 13:40:01 -06:00
top-panel-inset-namco-noir-plus-one.scad	s/topplate/panel/ --- just better naming	2024-02-06 19:19:33 -06:00
top-panel-inset-namco-noir-plus-two.scad	s/topplate/panel/ --- just better naming	2024-02-06 19:19:33 -06:00
top-panel-inset-sega-2p-plus-one-plus-control-with-mount.scad	better component/parameter names to match panel naming	2024-02-11 19:27:17 -06:00
top-panel-inset-sega-2p-plus-one-plus-control.scad	s/topplate/panel/ --- just better naming	2024-02-06 19:19:33 -06:00
top-panel-inset-sega-2p-plus-one.scad	s/topplate/panel/ --- just better naming	2024-02-06 19:19:33 -06:00
top-panel-overhang-left-lever-and-dir_arc-plus-w-30mm.scad	move the lever mount spacer out of the panels, into separate part	2024-02-22 13:40:01 -06:00
top-panel-overhang-left-lever.scad	move the lever mount spacer out of the panels, into separate part	2024-02-22 13:40:01 -06:00
top-panel-overhang-middle-dir_arc-plus-w-30mm-with-mount.scad	fix imports of the overhang panels following renames	2024-02-12 20:17:18 -06:00
top-panel-overhang-middle-dir_arc-plus-w-30mm.scad	better component/parameter names to match panel naming	2024-02-11 19:27:17 -06:00
top-panel-overhang-right-sega-2p-plus-one-plus-control-with-mount-with-oled.scad	fix imports of the overhang panels following renames	2024-02-12 20:17:18 -06:00
top-panel-overhang-right-sega-2p-plus-one-plus-control-with-mount.scad	fix imports of the overhang panels following renames	2024-02-12 20:17:18 -06:00
top-panel-overhang-right-sega-2p-plus-one-plus-control.scad	better component/parameter names to match panel naming	2024-02-11 19:27:17 -06:00
top-panel-overhang-right-sega-2p-plus-one-with-mount.scad	fix imports of the overhang panels following renames	2024-02-12 20:17:18 -06:00
top-panel-overhang-right-sega-2p-plus-one.scad	better component/parameter names to match panel naming	2024-02-11 19:27:17 -06:00
top-panel-overhang-solo-dir_arc-24mm-6-button.scad	better component/parameter names to match panel naming	2024-02-11 19:27:17 -06:00
top-panel-overhang-solo-dir_arc-plus-w-24mm-8-button.scad	better component/parameter names to match panel naming	2024-02-11 19:27:17 -06:00
top-panel-overhang-solo-lever-and-sega-2p-6-button.scad	better component/parameter names to match panel naming	2024-02-11 19:27:17 -06:00