| .. |
|
blown-up-demo.scad
|
new demo for v3 --- two panels
|
2023-09-17 11:28:56 -05:00 |
|
bottom-panel-inset.scad
|
allow the frame bottom to take insets/raised panels too
|
2023-11-02 16:34:08 -05:00 |
|
bottom-panel-left.scad
|
bottom panels with overhang for left/right/middle
|
2023-09-01 15:50:31 -05:00 |
|
bottom-panel-middle.scad
|
bottom panels with overhang for left/right/middle
|
2023-09-01 15:50:31 -05:00 |
|
bottom-panel-right.scad
|
bottom panels with overhang for left/right/middle
|
2023-09-01 15:50:31 -05:00 |
|
bottom-panel-solo.scad
|
allow the frame bottom to take insets/raised panels too
|
2023-11-02 16:34:08 -05:00 |
|
components.scad
|
add a comment that is all that survived some experimentation
|
2023-11-16 16:48:05 -06:00 |
|
frame-left.scad
|
allow the frame bottom to take insets/raised panels too
|
2023-11-02 16:34:08 -05:00 |
|
frame-middle.scad
|
allow the frame bottom to take insets/raised panels too
|
2023-11-02 16:34:08 -05:00 |
|
frame-right.scad
|
allow the frame bottom to take insets/raised panels too
|
2023-11-02 16:34:08 -05:00 |
|
frame-solo.scad
|
use the same frame cutout for neutrik D and 24mm holes
|
2023-09-11 20:34:09 -05:00 |
|
misc-decorative-plate-24mm-button.scad
|
cleanups to the decorative plates
|
2023-11-09 12:29:18 -06:00 |
|
misc-decorative-plate-dir_arc-plus-w-24mm-8-button.scad
|
cleanups to the decorative plates
|
2023-11-09 12:29:18 -06:00 |
|
misc-decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one.scad
|
cleanups to the decorative plates
|
2023-11-09 12:29:18 -06:00 |
|
misc-decorative-plate-dir_arc-plus-w-30mm.scad
|
cleanups to the decorative plates
|
2023-11-09 12:29:18 -06:00 |
|
misc-decorative-plate-sega-2p-6-button.scad
|
cleanups to the decorative plates
|
2023-11-09 12:29:18 -06:00 |
|
misc-decorative-plate-sega-2p-plus-one.scad
|
cleanups to the decorative plates
|
2023-11-09 12:29:18 -06:00 |
|
misc-dustwasher-jlf.scad
|
fix dustwashers by scaling them based on the plate hole
|
2023-11-14 23:56:03 -06:00 |
|
misc-dustwasher-lsx-nobi.scad
|
fix dustwashers by scaling them based on the plate hole
|
2023-11-14 23:56:03 -06:00 |
|
misc-neutrik-d-plate-20mm-hole.scad
|
neutrik D base plate, also good as a cover
|
2023-09-06 14:44:54 -05:00 |
|
misc-neutrik-d-plate-24mm-hole.scad
|
neutrik D base plate, also good as a cover
|
2023-09-06 14:44:54 -05:00 |
|
misc-neutrik-d-plate.scad
|
neutrik D base plate, also good as a cover
|
2023-09-06 14:44:54 -05:00 |
|
roundedcube.scad
|
simplify the frame and use roundedcube for it
|
2023-08-19 08:59:41 -05:00 |
|
top-panel-inset-dir_arc-plus-w-30mm-plus-one-with-mount.scad
|
refer to proper parent filename
|
2023-09-11 11:28:18 -05:00 |
|
top-panel-inset-dir_arc-plus-w-30mm-plus-one.scad
|
rename non-overhang panels accordingly
|
2023-09-01 15:54:55 -05:00 |
|
top-panel-inset-lever-and-dir_arc-plus-w-30mm.scad
|
inset panel for a lever + directionals + W
|
2023-11-07 14:39:36 -06:00 |
|
top-panel-inset-lever-with-mount.scad
|
refer to proper parent filename
|
2023-09-11 12:01:27 -05:00 |
|
top-panel-inset-lever.scad
|
rename non-overhang panels accordingly
|
2023-09-01 15:54:55 -05:00 |
|
top-panel-inset-namco-noir-plus-one.scad
|
rename non-overhang panels accordingly
|
2023-09-01 15:54:55 -05:00 |
|
top-panel-inset-namco-noir-plus-two.scad
|
rename non-overhang panels accordingly
|
2023-09-01 15:54:55 -05:00 |
|
top-panel-inset-sega-2p-plus-one-plus-control-with-mount.scad
|
more inset panels, my normal 9+1 buttons
|
2023-11-09 07:52:05 -06:00 |
|
top-panel-inset-sega-2p-plus-one-plus-control.scad
|
more inset panels, my normal 9+1 buttons
|
2023-11-09 07:52:05 -06:00 |
|
top-panel-inset-sega-2p-plus-one.scad
|
rename non-overhang panels accordingly
|
2023-09-01 15:54:55 -05:00 |
|
top-panel-left-lever-and-dir_arc-plus-w-30mm.scad
|
new top panels for my current two-frame experiment
|
2023-09-13 20:46:00 -05:00 |
|
top-panel-left-lever.scad
|
simple naming consistency change
|
2023-09-08 12:22:53 -05:00 |
|
top-panel-middle-dir_arc-plus-w-30mm-with-mount.scad
|
more top panel with overhang options
|
2023-09-01 13:39:48 -05:00 |
|
top-panel-middle-dir_arc-plus-w-30mm.scad
|
simple naming consistency change
|
2023-09-08 12:22:53 -05:00 |
|
top-panel-right-sega-2p-plus-one-plus-control-with-mount-with-oled.scad
|
add components for an OLED cutout and panel using it
|
2023-10-04 16:44:59 -05:00 |
|
top-panel-right-sega-2p-plus-one-plus-control-with-mount.scad
|
sega 2p panel with a button for start or whatever
|
2023-09-15 15:03:49 -05:00 |
|
top-panel-right-sega-2p-plus-one-plus-control.scad
|
sega 2p panel with a button for start or whatever
|
2023-09-15 15:03:49 -05:00 |
|
top-panel-right-sega-2p-plus-one-with-mount.scad
|
remove unnecessary difference/union duplication
|
2023-09-15 15:01:39 -05:00 |
|
top-panel-right-sega-2p-plus-one.scad
|
simple naming consistency change
|
2023-09-08 12:22:53 -05:00 |
|
top-panel-solo-dir_arc-24mm-6-button.scad
|
try making the frame wider than it is deep
|
2023-09-11 13:29:40 -05:00 |
|
top-panel-solo-dir_arc-plus-w-24mm-8-button.scad
|
improve 24mm + W layout components, add decorative plate
|
2023-10-04 16:47:06 -05:00 |
|
top-panel-solo-lever-and-sega-2p-6-button.scad
|
fit an arcade layout in one panel
|
2023-09-13 21:17:45 -05:00 |
