| .. |
|
blown-up-demo.scad
|
commit my scratch file since it's a good demo
|
2023-09-07 19:17:48 -05:00 |
|
bottom-panel-left.scad
|
bottom panels with overhang for left/right/middle
|
2023-09-01 15:50:31 -05:00 |
|
bottom-panel-middle.scad
|
bottom panels with overhang for left/right/middle
|
2023-09-01 15:50:31 -05:00 |
|
bottom-panel-no-overhang.scad
|
rename non-overhang panels accordingly
|
2023-09-01 15:54:55 -05:00 |
|
bottom-panel-right.scad
|
bottom panels with overhang for left/right/middle
|
2023-09-01 15:50:31 -05:00 |
|
bottom-panel-solo.scad
|
remove unused, unnecessary panel with no concave
|
2023-08-29 23:33:51 -05:00 |
|
components.scad
|
use the same frame cutout for neutrik D and 24mm holes
|
2023-09-11 20:34:09 -05:00 |
|
frame-left.scad
|
use the same frame cutout for neutrik D and 24mm holes
|
2023-09-11 20:34:09 -05:00 |
|
frame-middle.scad
|
use the same frame cutout for neutrik D and 24mm holes
|
2023-09-11 20:34:09 -05:00 |
|
frame-right.scad
|
rename project before sharing
|
2023-08-24 22:49:34 -05:00 |
|
frame-solo.scad
|
use the same frame cutout for neutrik D and 24mm holes
|
2023-09-11 20:34:09 -05:00 |
|
misc-decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one.scad
|
rename some misc files for consistency/sorting
|
2023-09-05 10:41:59 -05:00 |
|
misc-decorative-plate-dir_arc-plus-w-30mm.scad
|
rename some misc files for consistency/sorting
|
2023-09-05 10:41:59 -05:00 |
|
misc-decorative-plate-sega-2p-plus-one.scad
|
rename some misc files for consistency/sorting
|
2023-09-05 10:41:59 -05:00 |
|
misc-dustwasher-lsx-nobi.scad
|
tighten up the inner hole a bit, to no noticeable detriment
|
2023-09-11 10:37:46 -05:00 |
|
misc-neutrik-d-plate-20mm-hole.scad
|
neutrik D base plate, also good as a cover
|
2023-09-06 14:44:54 -05:00 |
|
misc-neutrik-d-plate-24mm-hole.scad
|
neutrik D base plate, also good as a cover
|
2023-09-06 14:44:54 -05:00 |
|
misc-neutrik-d-plate.scad
|
neutrik D base plate, also good as a cover
|
2023-09-06 14:44:54 -05:00 |
|
roundedcube.scad
|
simplify the frame and use roundedcube for it
|
2023-08-19 08:59:41 -05:00 |
|
top-panel-inset-dir_arc-plus-w-30mm-plus-one-with-mount.scad
|
refer to proper parent filename
|
2023-09-11 11:28:18 -05:00 |
|
top-panel-inset-dir_arc-plus-w-30mm-plus-one.scad
|
rename non-overhang panels accordingly
|
2023-09-01 15:54:55 -05:00 |
|
top-panel-inset-lever-with-mount.scad
|
refer to proper parent filename
|
2023-09-11 12:01:27 -05:00 |
|
top-panel-inset-lever.scad
|
rename non-overhang panels accordingly
|
2023-09-01 15:54:55 -05:00 |
|
top-panel-inset-namco-noir-plus-one.scad
|
rename non-overhang panels accordingly
|
2023-09-01 15:54:55 -05:00 |
|
top-panel-inset-namco-noir-plus-two.scad
|
rename non-overhang panels accordingly
|
2023-09-01 15:54:55 -05:00 |
|
top-panel-inset-sega-2p-plus-one.scad
|
rename non-overhang panels accordingly
|
2023-09-01 15:54:55 -05:00 |
|
top-panel-left-lever.scad
|
simple naming consistency change
|
2023-09-08 12:22:53 -05:00 |
|
top-panel-middle-dir_arc-plus-w-30mm-with-mount.scad
|
more top panel with overhang options
|
2023-09-01 13:39:48 -05:00 |
|
top-panel-middle-dir_arc-plus-w-30mm.scad
|
simple naming consistency change
|
2023-09-08 12:22:53 -05:00 |
|
top-panel-right-sega-2p-plus-one.scad
|
simple naming consistency change
|
2023-09-08 12:22:53 -05:00 |
|
top-panel-solo-dir_arc-24mm-6-button.scad
|
try making the frame wider than it is deep
|
2023-09-11 13:29:40 -05:00 |
|
top-panel-solo-dir_arc-plus-w-24mm-8-button.scad
|
try making the frame wider than it is deep
|
2023-09-11 13:29:40 -05:00 |
