buildable-stick-system/src/extras/bss-ae

BSS Arcade Edition

Pieces for mounting to a Qanba 2009 in order to create the Buildable Stick System - Arcade Edition.

Pieces

• 4 interconnect-x --- creating the internal support for joining two rows of panels
• 6 frames/pieces/interconnect --- (core project) the standard piece for joining two+ columns of panels
• 4 extended-side-no-back --- the extended side pieces, flush on the back to connect to each other
• 4 frames/pieces/extended/front-or-back --- (core project) the front extended piece
• 2 extended-back --- a small piece that fits into the Qanba 2009 "lip" for running cables
• 1 extended-back-left-mount
• 1 extended-back-right-mount --- extended back pieces that can be mounted to the Qanba 2009 base
• 1 panel-front-left-mount
• 1 panel-front-right-mount --- blank panels that can be mounted to the Qanba 2009 base
• 6 panels/inset/panel --- the rest of the bottom panels
• 4 panels/inset/ panels of your choice for the front controls
• 2 panel-three-aux-buttons --- for aux controls in the back row
• 2 panel-three-aux-buttons-and-rocker-hole --- for aux controls and the wired rocker in the back row
• 4 decorative-plate-aux-control-tight-three-button-cluster --- for decorating the aux control clusters
• 4 src/misc/ decorative plates of your choice for the front controls, and similar miscellany
• 4 mount-spacer --- making a flush mount between the enclosure and the base

Hardware

• 32 45mm M4 hex brass standoffs (or equivalent) for each panel/frame compartment
• 64 8-12mm M4 countersunk hex bolts for attaching panels to the compartments
• 4 8-12mm M3 hex bolts and 4 M3 flange nuts for attaching rocker switches to the back panels
• 4 40mm M6 bolts for connecting the enclosure to the base
• 4 M6 flange nuts

Components

• 2 controller boards, e.g. the RP2040 Advanced Breakout Board
• buttons and/or levers as desired
• necessary wiring

For the rest of the build (e.g. mounting a level to a panel), see the core README.