-
fe0e3b6017
center the button panels and their layouts
Brian S. Stephan
2023-08-30 00:22:31 -05:00
-
16d3feadc1
use the larger concaveness from the overhang panel
Brian S. Stephan
2023-08-29 10:54:26 -05:00
-
1db6577f75
remove unused, unnecessary panel with no concave
Brian S. Stephan
2023-08-29 10:29:38 -05:00
-
cd5cd422e5
rename side chopper, going to be used for more than just frames
Brian S. Stephan
2023-08-29 10:13:40 -05:00
-
652653180e
go back to three neutrik D mounts on the solo frame
Brian S. Stephan
2023-08-29 10:07:08 -05:00
-
73e93d4536
make a bottom overhang plate
Brian S. Stephan
2023-08-29 10:06:21 -05:00
-
e51b79a193
squeeze dir. arc + W w/8 buttons on one panel
Brian S. Stephan
2023-08-28 10:51:07 -05:00
-
694e2c6173
bring 5 mm back to the frame
Brian S. Stephan
2023-08-28 10:47:53 -05:00
-
a8ca6bafa9
fix the frame support box again
Brian S. Stephan
2023-08-28 00:08:48 -05:00
-
cd71ed013b
fix the frame box width, which was too thin bc math is hard
Brian S. Stephan
2023-08-27 15:17:24 -05:00
-
12273649f5
better name for the 24mm dir + 6 button panel
Brian S. Stephan
2023-08-27 14:36:34 -05:00
-
57be13d9cb
more accurate name for the neutrik D plate
Brian S. Stephan
2023-08-26 22:12:07 -05:00
-
344de2c84f
standalone frame, with tweaks to the frame as a consequence
Brian S. Stephan
2023-08-26 21:50:20 -05:00
-
a8d02f9229
squish a decent all buttons layout onto one panel
Brian S. Stephan
2023-08-26 14:48:01 -05:00
-
af38f0a580
move top plate holes into reusable module
Brian S. Stephan
2023-08-26 14:42:58 -05:00
-
19fa31b425
a one-panel 24mm dir arc + action buttons layout
Brian S. Stephan
2023-08-25 15:06:49 -05:00
-
6ca57615e4
solve for 24mm/30mm snap-ins
Brian S. Stephan
2023-08-25 14:59:37 -05:00
-
8fc51019c3
really simple Makefile to compile the STLs
v1.0.0
Brian S. Stephan
2023-08-24 23:23:41 -05:00
-
f7fa46a074
include an example of what's possible
Brian S. Stephan
2023-08-24 23:11:43 -05:00
-
9f98f0cfa7
rename project before sharing
Brian S. Stephan
2023-08-24 22:49:34 -05:00
-
a3608492fb
considerably more README documentation
Brian S. Stephan
2023-08-24 19:51:07 -05:00
-
144e512433
licensing language tweaks
Brian S. Stephan
2023-08-24 15:04:11 -05:00
-
b0ca4d97c8
neutrik D plate to attach SPDT switches to
Brian S. Stephan
2023-08-24 12:54:42 -05:00
-
94a2e372f1
another improvement to make to v2
Brian S. Stephan
2023-08-24 10:16:35 -05:00
-
084f812541
directional buttons panel with PCB mount
Brian S. Stephan
2023-08-23 22:27:01 -05:00
-
21467010a7
split lever panel and w/mount variant into two files
Brian S. Stephan
2023-08-23 10:37:52 -05:00
-
cc7c5c5723
namco noir with even MOAR BUTTONS
Brian S. Stephan
2023-08-22 12:23:20 -05:00
-
4020eabb31
for next time: fix snap-ins
Brian S. Stephan
2023-08-22 12:22:29 -05:00
-
00e8344a91
panel for 30mm "directional arc" buttons + W + one extra
Brian S. Stephan
2023-08-21 15:00:28 -05:00
-
0362e8f3ed
concave bottom panel to account for levers
Brian S. Stephan
2023-08-21 08:42:30 -05:00
-
facee903cf
add mount for a standard PS360+/RP2040ABB form factor PCB
Brian S. Stephan
2023-08-20 23:59:24 -05:00
-
f5ecdc9154
shrink the JLF mount panel height by 1mm
Brian S. Stephan
2023-08-20 23:43:32 -05:00
-
80079a74a8
properly center frame mounting holes
Brian S. Stephan
2023-08-20 18:24:25 -05:00
-
40692bb6ff
bottom panel is just the base top panel
Brian S. Stephan
2023-08-20 09:56:25 -05:00
-
33271abef0
leaving some notes and comments for myself
Brian S. Stephan
2023-08-20 09:56:02 -05:00
-
f46500e941
start a TODO document for noticed future tweaks
Brian S. Stephan
2023-08-19 22:33:02 -05:00
-
6064884a89
account for 24mm buttons in the frame tops
Brian S. Stephan
2023-08-19 17:47:44 -05:00
-
7faa28b4b1
simplify the frame and use roundedcube for it
Brian S. Stephan
2023-08-19 08:59:41 -05:00
-
6c04c1b2f2
ethercon (and probably other neutrik Ds) need the wall thinner
Brian S. Stephan
2023-08-18 10:21:00 -05:00
-
78ea95ecbd
moduleify middle_frame for testing purposes
Brian S. Stephan
2023-08-18 10:08:34 -05:00
-
42f417d86a
middle frame mostly ok, but I forgot to check neutrik panel thickness
Brian S. Stephan
2023-08-18 00:23:59 -05:00
-
e94a0498a3
remove the test hole from the lever plate
Brian S. Stephan
2023-08-17 20:45:38 -05:00
-
6e1ef9efaf
tiny rename for the lever base plate
Brian S. Stephan
2023-08-17 20:27:59 -05:00
-
925cfebe9e
moduleize left lever panel for reuse
Brian S. Stephan
2023-08-17 20:02:59 -05:00
-
0bea740cee
move frame chopper into components for reuse
Brian S. Stephan
2023-08-17 19:55:42 -05:00
-
a94836ff96
modularize left_frame for reuse
Brian S. Stephan
2023-08-17 19:54:07 -05:00
-
2cae32bce5
move frame mounting holes to components
Brian S. Stephan
2023-08-17 19:53:40 -05:00
-
4f22e08613
rename to match standardizing
Brian S. Stephan
2023-08-17 19:47:18 -05:00
-
8b850143ed
trivial, maybe meaningless, tweak to line up "+1" with noir
Brian S. Stephan
2023-08-17 19:40:49 -05:00
-
530b973a2d
renaming the lever panel to fit the pattern
Brian S. Stephan
2023-08-17 18:50:56 -05:00
-
362d156067
make the noir and sega 2p panels modules
Brian S. Stephan
2023-08-17 18:49:09 -05:00
-
c14c97e832
did a Namco Noir layout, it also worked fine
Brian S. Stephan
2023-08-17 18:43:46 -05:00
-
23efe61eeb
test sega 2P layout, buttons fit pretty well
Brian S. Stephan
2023-08-17 16:09:43 -05:00
-
b47b192fd4
successful version of the left frame
Brian S. Stephan
2023-08-17 10:53:43 -05:00
-
a3cdbf7069
small tweaks to hole sizes
Brian S. Stephan
2023-08-16 18:47:03 -05:00
-
894e46c4ee
more components that look good on a test print
Brian S. Stephan
2023-08-16 18:18:42 -05:00
-
a3b9cab08e
successful test of the frame relative to the top plate
Brian S. Stephan
2023-08-16 15:02:01 -05:00
-
f7e706c21d
module for reference top plate without holes
Brian S. Stephan
2023-08-16 13:59:09 -05:00
-
ca5ae59cc6
include rather than use, in order to get variables
Brian S. Stephan
2023-08-16 13:50:58 -05:00
-
b04c0f2d2e
tested-good size for the hex case mount interior
Brian S. Stephan
2023-08-16 13:33:20 -05:00
-
2b152693d6
test panel for this printed pretty well
Brian S. Stephan
2023-08-16 08:36:34 -05:00
-
9aa881be55
README license and attribution information
Brian S. Stephan
2023-08-16 08:25:04 -05:00
-
34234d38ae
Initial commit
Brian S. Stephan
2023-08-16 08:05:31 -05:00
