fix the blown up demo and update it for the docs

Signed-off-by: Brian S. Stephan <bss@incorporeal.org>

CONTRIBUTING.md

@@ -0,0 +1,35 @@
+# Contributing Guidelines
+
+The Buildable Stick System is made available under the GPLv3 (or later) license. Contributions are welcome via pull
+requests. This document outlines the process to get your contribution accepted.
+
+## Sign Offs/Custody of Contributions
+
+I do not request the copyright of contributions be assigned to me or to the project, and I require no provision that I
+be allowed to relicense your contributions. My personal oath is to maintain inbound=outbound in my open source projects,
+and the expectation is authors are responsible for their contributions.
+
+I am following the the [Developer Certificate of Origin (DCO)](https://developercertificate.org/), also available at
+`DCO.txt`. The DCO is a way for contributors to certify that they wrote or otherwise have the right to license their
+code contributions to the project. Contributors must sign-off that they adhere to these requirements by adding a
+`Signed-off-by` line to their commit message, and/or, for frequent contributors, by signing off on their entry in
+`MAINTAINERS.md`.
+
+This process is followed by a number of open source projects, most notably the Linux kernel. Here's the gist of it:
+
+```
+[Your normal Git commit message here.]
+
+Signed-off-by: Random J Developer <random@developer.example.org>
+```
+
+`git help commit` has more info on adding this:
+
+```
+-s, --signoff
+    Add Signed-off-by line by the committer at the end of the commit log
+    message. The meaning of a signoff depends on the project, but it typically
+    certifies that committer has the rights to submit this work under the same
+    license and agrees to a Developer Certificate of Origin (see
+    http://developercertificate.org/ for more information).
+```

DCO.txt

@@ -0,0 +1,34 @@
+Developer Certificate of Origin
+Version 1.1
+
+Copyright (C) 2004, 2006 The Linux Foundation and its contributors.
+
+Everyone is permitted to copy and distribute verbatim copies of this
+license document, but changing it is not allowed.
+
+
+Developer's Certificate of Origin 1.1
+
+By making a contribution to this project, I certify that:
+
+(a) The contribution was created in whole or in part by me and I
+    have the right to submit it under the open source license
+    indicated in the file; or
+
+(b) The contribution is based upon previous work that, to the best
+    of my knowledge, is covered under an appropriate open source
+    license and I have the right under that license to submit that
+    work with modifications, whether created in whole or in part
+    by me, under the same open source license (unless I am
+    permitted to submit under a different license), as indicated
+    in the file; or
+
+(c) The contribution was provided directly to me by some other
+    person who certified (a), (b) or (c) and I have not modified
+    it.
+
+(d) I understand and agree that this project and the contribution
+    are public and that a record of the contribution (including all
+    personal information I submit with it, including my sign-off) is
+    maintained indefinitely and may be redistributed consistent with
+    this project or the open source license(s) involved.

MAINTAINERS.md

@@ -0,0 +1,10 @@
+# Maintainers
+
+This file contains information about people permitted to make major decisions and direction on the project.
+
+## Contributing Under the DCO
+
+By adding your name and email address to this section, you certify that all of your subsequent contributions to the
+Buildable Stick System are made under the terms of the Developer's Certificate of Origin 1.1, available at `DCO.txt`.
+
+* Brian S. Stephan (<bss@incorporeal.org>)

Makefile

@@ -1,4 +1,5 @@
 SRC_FILES := $(wildcard ./src/*.scad)
+SRC_FILES := $(filter-out ./src/all-together-demo.scad, $(SRC_FILES))
 SRC_FILES := $(filter-out ./src/blown-up-demo.scad, $(SRC_FILES))
 SRC_FILES := $(filter-out ./src/components.scad, $(SRC_FILES))
 SRC_FILES := $(filter-out ./src/roundedcube.scad, $(SRC_FILES))

README.md

@@ -2,7 +2,7 @@
 
 Files for 3D printing an arcade stick.
 
-![An example of stick components displayed in OpenSCAD](docs/two-panel-example-v3.png)
+![An example of stick components displayed in OpenSCAD](docs/blown-up-demo.png)
 
 [OpenSCAD-based illustration of how the components for an overhang panel-based stick fit together.]
 
@@ -28,6 +28,10 @@ These items all fit on a 256mm^2 print bed; I use a Bambu Lab P1P based on what
 OpenStickCommunity. Standard settings seem sufficiently sturdy for my purposes, though the slicer has done a couple
 weird things, in my experience.
 
+My preferred settings are 3 wall loops with 20% gyroid sparse infill. This gives the models a bit more weight and
+stability, but something like 2 wall loops, 15% grid sparse infill is fine and does not lead to a weak enclosure. The
+costs below have been made against my settings.
+
 ## Assembling
 
 What you'll need beyond these objects:
@@ -36,12 +40,12 @@ What you'll need beyond these objects:
   Board](https://github.com/OpenStickCommunity/Hardware/tree/main/RP2040%20Advanced%20Breakout%20Board))
     * 4 M3 8mm hex bolts to secure the PCB to a panel
 * Per frame and plate combo:
-    * 4 40mm M4 hex brass standoffs (or equivalent)
+    * 4 45mm M4 hex brass standoffs (or equivalent)
     * 8 M4 countersunk hex bolts
         * Overhang plates should use 12-16mm length bolts since they are taller
         * Inset plates should probably use 8-12mm bolts --- some standoffs aren't threaded the whole way, making 16mm
           too long to go flush
-        * If making the 40mm standoffs from multiple smaller ones, make sure they have enough length to take your bolts!
+        * If making the 45mm standoffs from multiple smaller ones, make sure they have enough length to take your bolts!
 * Per frame connection point:
     * 8 16mm M4 bolts
     * 8 M4 flange nuts
@@ -59,17 +63,17 @@ What you'll need beyond these objects:
 This is a rough estimate of the cost to produce one of these sticks, assuming a usual 2-frame design and layout.
 Filament masses from Bambu Studio estimates, using Bambu PLA Basic.
 
-* Left and right frame: **$7.08 USD** (141.84g each, as of 2023-09-12)
-* Left and right (overhang) top panels: **~$6.74 USD** (~135g each, as of 2023-09-12)
-* Left and right (overhang) bottom panels: **$5.90 USD** (118.16g each, as of 2023-09-12)
-* Miscellaneous mounting plates, decorative plates, etc.: **~$1.00 USD** (~40g, as of 2023-09-12)
+* Left and right frame: **$10.42 USD** (208.50g each, as of 2024-02-22)
+* Left and right (inset) top panels: **~$6.40 USD** (~128g each, as of 2024-02-22)
+* Left and right (non-overhang) bottom panels: **$6.80 USD** (135.99g each, as of 2024-02-22)
+* Miscellaneous mounting plates, decorative plates, etc.: **~$1.83 USD** (~73g, as of 2024-02-22)
 * 8 16mm M4 bolts to connect the frames: **$0.72 USD** (you can get a pack of 100 on Amazon for $9, as of 2023-09-12)
 * 8 M4 flange nuts to connect the frames: **$0.68 USD** (you can get a pack of 100 on Amazon for $8.50, as of 2023-09-12)
 * 4 10mm M3 bolts to connect Neutrik D plates to frames: **$0.40 USD** (you can get a pack of 100 on Amazon for $10, as
   of 2023-09-12)
 * 4 M3 flange nuts to connect Neutrik D plates to frames: **$0.34 USD** (you can get a pack of 100 on Amazon for $8.50,
   as of 2023-09-12)
-* 8 40mm M4 spacers to connect panels to frames: **$2.40 USD** (you can get a pack of 10 on AliExpress for $3, as of
+* 8 45mm M4 spacers to connect panels to frames: **$2.40 USD** (you can get a pack of 10 on AliExpress for $3, as of
   2023-09-12)
     * You could 3D print these too, but you're probably better off with brass ones as they give some weight to the
       stick anyway
@@ -79,9 +83,10 @@ Filament masses from Bambu Studio estimates, using Bambu PLA Basic.
 * 8 12mm M4 bolts to connect bottom plates to frames: **$0.72 USD** (you can get a pack of 100 on Amazon for $9, as of
   2023-09-12)
 
-With an enclosure coming in around $26, depending on your choices --- say, ~$30 for TheTrain's RP2040 Advanced Breakout
+With an enclosure coming in around $31, depending on your choices --- say, ~$30 for TheTrain's RP2040 Advanced Breakout
 Board, ~$60 for Sanwa buttons and a lever, and ~$20 for miscellaneous connectors and wiring --- you can put a
-full-featured controller with an open source foundation together for around $135.
+full-featured controller with an open source foundation together for around $140. Reducing wall and infill settings
+will probably save you around $5 of material, and you can probably decide what you want to do from there.
 
 ## Miscellany
 
@@ -99,6 +104,13 @@ Improvements, variants, new layouts, novel ideas, and etc. are all welcome.
 These files are suitable for previewing and rendering in OpenSCAD. They may also work in FreeCAD and perhaps other
 software, but they are developed in OpenSCAD, so YMMV otherwise.
 
+This project is hosted at [my personal Git site](https://git.incorporeal.org/bss/buildable-stick-system), but people are
+more likely to want to interact with [the GitHub mirror](https://github.com/bsstephan/buildable-stick-system). Feel free
+to use either.
+
+You may find me at a number of places; I maintain an IRC channel, `#buildable-stick-system`, on [my IRC network,
+Randomus](https://randomus.net/).
+
 ## Attribution
 
 Inspired by the incredible work of [TheTrain](https://github.com/TheTrainGoes) on the [OpenStickCommunity Fightstick

TODO.md

@@ -2,6 +2,10 @@
 
 Notes for "next time".
 
+## v3.3
+
+* Try not using roundedcube and instead bezel the top, to get cleaner seams everywhere else
+
 ## v4
 
 * Engraving some cosmetic stuff? Or maybe a place to mount other plates?

docs/materials.md

@@ -21,4 +21,5 @@ bss's random thoughts and notes on 3D printing materials.
 
 ## Hatchbox PLA
 
-* Haven't done a lot of this yet, but my wife really likes the blue.
+* **Blue:** very blue. Wife likes it.
+* **White:** more opaque than the Bambu PLA mentioned above, makes a pretty decent (still slightly translucent) frame.

src/blown-up-demo.scad

@@ -1,39 +1,27 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 use <frame-left.scad>
 use <frame-right.scad>
-use <top-panel-left-lever-and-dir_arc-plus-w-30mm.scad>
-use <top-panel-right-sega-2p-plus-one-plus-control-with-mount.scad>
-use <bottom-panel-left.scad>
-use <bottom-panel-right.scad>
+use <top-panel-overhang-left-lever-and-dir_arc-plus-w-30mm.scad>
+use <top-panel-overhang-right-sega-2p-plus-one-plus-control-with-mount.scad>
+use <bottom-panel-overhang-left.scad>
+use <bottom-panel-overhang-right.scad>
 use <misc-decorative-plate-24mm-button.scad>
 use <misc-decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one.scad>
 use <misc-dustwasher-lsx-nobi.scad>
 
-color("#C12E1F") translate([-top_plate_x/2-25, 0, frame_z/2+75]) top_panel_left_lever_and_dir_arc_w_30mm();
-color("#C12E1F") translate([top_plate_x/2+25, 0, frame_z/2+75]) top_panel_right_sega_2p_plus_one_plus_control_with_mount();
+color("#C12E1F") translate([-panel_x/2-25, 0, frame_z/2+75]) top_panel_left_lever_and_dir_arc_w_30mm();
+color("#C12E1F") translate([panel_x/2+25, 0, frame_z/2+75]) top_panel_right_sega_2p_plus_one_plus_control_with_mount();
 color("black") translate([-frame_x/2+5-25, 0, -2.5]) left_frame();
 color("black") translate([frame_x/2+25, 0, -2.5]) right_frame();
-color("#C12E1F") translate([-top_plate_x/2-25, 0, -5-frame_z/2-75]) bottom_panel_left();
-color("#C12E1F") translate([top_plate_x/2+25, 0, -5-frame_z/2-75]) bottom_panel_right();
+color("#C12E1F") translate([-panel_x/2-25, 0, -5-frame_z/2-75]) bottom_panel_left();
+color("#C12E1F") translate([panel_x/2+25, 0, -5-frame_z/2-75]) bottom_panel_right();
 
 color("black") translate([0, 0, 3+frame_z/2+150]) dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate();
 color("black") translate([-195, 25, 3+frame_z/2+150]) lsx_nobi_dustwasher();
-color("black") translate([top_plate_x, 25, 3+frame_z/2+150]) button_24mm_decorative_plate();
+color("black") translate([panel_x, 25, 3+frame_z/2+150]) button_24mm_decorative_plate();

src/bottom-panel-inset.scad

@@ -1,28 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <components.scad>
-
-module bottom_panel() {
-	difference() {
-		mirror([0, 0, 1]) topplate();
-		translate([0, 0, top_plate_z/2]) cube([top_plate_x-40, top_plate_y-40, top_plate_z], center=true);
-	}
-}
-
-bottom_panel();

src/bottom-panel-left.scad

@@ -1,30 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <components.scad>
-use <bottom-panel-solo.scad>
-
-module bottom_panel_left() {
-	difference() {
-		bottom_panel_solo();
-		// chop the right edge off
-		side_chopper();
-	}
-}
-
-bottom_panel_left();

src/bottom-panel-middle.scad

@@ -1,30 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <components.scad>
-use <bottom-panel-left.scad>
-use <bottom-panel-right.scad>
-
-module bottom_panel_middle() {
-	intersection() {
-		bottom_panel_left();
-		bottom_panel_right();
-	}
-}
-
-bottom_panel_middle();

src/bottom-panel-overhang-left.scad

@@ -0,0 +1,18 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <bottom-panel-overhang-solo.scad>
+
+module bottom_panel_left() {
+	difference() {
+		bottom_panel_solo();
+		// chop the right edge off
+		side_chopper();
+	}
+}
+
+bottom_panel_left();

src/bottom-panel-overhang-middle.scad

@@ -0,0 +1,18 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <bottom-panel-overhang-left.scad>
+use <bottom-panel-overhang-right.scad>
+
+module bottom_panel_middle() {
+	intersection() {
+		bottom_panel_left();
+		bottom_panel_right();
+	}
+}
+
+bottom_panel_middle();

src/bottom-panel-overhang-right.scad

@@ -0,0 +1,14 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <bottom-panel-overhang-left.scad>
+
+module bottom_panel_right() {
+	rotate([0, 0, 180]) bottom_panel_left();
+}
+
+bottom_panel_right();

src/bottom-panel-overhang-solo.scad

@@ -0,0 +1,16 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+
+module bottom_panel_solo() {
+	difference() {
+		overhang_plate();
+		rotate([180, 0, 0]) panel_holes();
+	}
+}
+
+bottom_panel_solo();

src/bottom-panel-right.scad

@@ -1,26 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <components.scad>
-use <bottom-panel-left.scad>
-
-module bottom_panel_right() {
-	rotate([0, 0, 180]) bottom_panel_left();
-}
-
-bottom_panel_right();

src/bottom-panel-solo.scad

@@ -1,28 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <components.scad>
-
-module bottom_panel_solo() {
-	difference() {
-		bottom_plate_with_overhang();
-		translate([0, 0, top_plate_z/2]) cube([top_plate_x-40, top_plate_y-40, top_plate_z], center=true);
-	}
-}
-
-bottom_panel_solo();

src/bottom-panel.scad

@@ -0,0 +1,9 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+
+bottom_panel();

src/components.scad

@@ -1,92 +1,10 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
 include <roundedcube.scad>
 
-/* QUASI-CONSTANTS */
-
-// adjustments
-hole_tolerance = 0.15;
-
-// M2
-m2_screw_selftap_radius = 0.95;
-
-// M3
-m3_screw_selftap_radius = 1.3;
-
-// M4
-m4_bolt_radius = 2 + hole_tolerance;
-m4_bolt_countersink_radius = 6.1 + hole_tolerance;
-m4_bolt_hex_exterior_radius = 3.6 + hole_tolerance;
-
-// 24mm button
-small_button_radius = 12 + hole_tolerance;
-
-// 30mm button
-big_button_radius = 15 + hole_tolerance;
-
-// JLF mount dimensions
-lever_mount_x = 53;
-lever_mount_y = 95;
-lever_mount_z = 2;
-
-// standard lever hole
-lever_plate_hole = 12;
-
-// case dimensions
-// base frame box. reminder: top of inside (including mounts) is chopped by top_plate_z for plates
-frame_x = 233;
-frame_y = 208;
-frame_z = 50;
-
-// depth of the "lip" of the frame that the top plate sets into/supports the overhang
-frame_wall = 4;
-
-// per neutrik (mm)
-neutrik_panel_thickness = 3;
-
-// top plate, which can either be the whole plate ("inset") or the mounting frame for a plate that overhangs
-top_plate_x = frame_x - (frame_wall * 2);
-top_plate_y = frame_y - (frame_wall * 2);
-top_plate_z = 5;
-
-// how much the top plate x/y is expanded to overhang the frame
-// note that this is relative to the top plate (so the wall is added back)
-top_plate_overhang_amount = 8.5;
-overhang_top_plate_x = top_plate_x + (frame_wall * 2) + (top_plate_overhang_amount * 2);
-overhang_top_plate_y = top_plate_y + (frame_wall * 2) + (top_plate_overhang_amount * 2);
-
-plate_to_frame_point_x = (top_plate_x/2)-10;
-plate_to_frame_point_y = (top_plate_y/2)-10;
-
-// frame interior that supports the top plates
-panel_support_width = 5;
-
-// neutrik D screw holes
-neutrik_d_screw_radius = 1.6 + hole_tolerance;
-neutrik_d_radius = 12 + hole_tolerance;
-
-// additional button radius for decorative panels, etc.
-decorative_radius_scale = 1.75;
-jumbo_decorative_radius_scale = 2;
-
-/* PARTS */
-
 module m4_hole() {
 	cylinder(r=m4_bolt_radius, h=100, $fn=50, center=true);
 }
@@ -95,17 +13,17 @@ module m4_hole_countersink() {
 	cylinder(r1=m4_bolt_radius, r2=m4_bolt_countersink_radius, h=3.2, $fn=50, center=true);
 }
 
-module top_plate_holes() {
+module panel_holes() {
 	// holes for mount bolts
-	translate([plate_to_frame_point_x, plate_to_frame_point_y, 0]) m4_hole();
-	translate([plate_to_frame_point_x, -plate_to_frame_point_y, 0]) m4_hole();
-	translate([-plate_to_frame_point_x, plate_to_frame_point_y, 0]) m4_hole();
-	translate([-plate_to_frame_point_x, -plate_to_frame_point_y, 0]) m4_hole();
+	translate([panel_to_frame_point_x, panel_to_frame_point_y, 0]) m4_hole();
+	translate([panel_to_frame_point_x, -panel_to_frame_point_y, 0]) m4_hole();
+	translate([-panel_to_frame_point_x, panel_to_frame_point_y, 0]) m4_hole();
+	translate([-panel_to_frame_point_x, -panel_to_frame_point_y, 0]) m4_hole();
 	// holes for mount bolt countersinks
-	translate([plate_to_frame_point_x, plate_to_frame_point_y, 2]) m4_hole_countersink();
-	translate([plate_to_frame_point_x, -plate_to_frame_point_y, 2]) m4_hole_countersink();
-	translate([-plate_to_frame_point_x, plate_to_frame_point_y, 2]) m4_hole_countersink();
-	translate([-plate_to_frame_point_x, -plate_to_frame_point_y, 2]) m4_hole_countersink();
+	translate([panel_to_frame_point_x, panel_to_frame_point_y, 2]) m4_hole_countersink();
+	translate([panel_to_frame_point_x, -panel_to_frame_point_y, 2]) m4_hole_countersink();
+	translate([-panel_to_frame_point_x, panel_to_frame_point_y, 2]) m4_hole_countersink();
+	translate([-panel_to_frame_point_x, -panel_to_frame_point_y, 2]) m4_hole_countersink();
 }
 
 // button hole, with extra wide bits for various uses (cutting out space
@@ -113,9 +31,9 @@ module top_plate_holes() {
 module button_24mm_hole() {
 	cylinder(r=small_button_radius, h=100, $fn=50, center=true);
 	// carve out space for snap-ins, leave 3mm
-	// slagcoin has screw-in nut diameter at 29.5mm, so radius+6 to leave some space
+	// slagcoin has screw-in nut diameter at 29.5mm, so radius+3 to leave some space
 	// translation is to leave 3mm thickness in the plate without recentering anything
-	translate([0, 0, -25]) cylinder(r=small_button_radius+6, h=49, $fn=50, center=true);
+	translate([0, 0, -25]) cylinder(r=small_button_radius+3, h=49, $fn=50, center=true);
 	// space for decorative button surround stuff
 	translate([0, 0, 50]) cylinder(r=small_button_radius*decorative_radius_scale, h=20, $fn=50, center=true);
 	translate([0, 0, 70]) cylinder(r=small_button_radius*jumbo_decorative_radius_scale, h=20, $fn=50, center=true);
@@ -156,9 +74,23 @@ module neutrik_d_mount() {
 	translate([-9.5, -12, 0]) neutrik_d_screw_hole();
 }
 
-// space for a neutrik D mount or 24mm button
+module rocker_20mm_mount() {
+	cylinder(r=10+hole_tolerance, h=5, $fn=50, center=true);
+	cube([2.2, 22, 5], center=true);
+	translate([9.5, 12, 0]) neutrik_d_screw_hole();
+	translate([-9.5, -12, 0]) neutrik_d_screw_hole();
+}
+
+// space for a neutrik D mount or 24mm button - Z is to cut the whole inside without affecting panel lip
 module frame_cutout() {
-	cube([36.5, 8, 40], center=true);
+	cube([30.5, 8, frame_z-(panel_z*2)-2], center=true);
+}
+
+// bank of three 24mm buttons, commonly on a frame face
+module aux_control_three_button_cluster() {
+	translate([-37, 0, 0]) button_24mm_hole();
+	translate([0, 0, 0]) button_24mm_hole();
+	translate([37, 0, 0]) button_24mm_hole();
 }
 
 module m2_mount_post() {
@@ -219,6 +151,9 @@ module levermountholes() {
 		m4_hole();
 	translate([-20, -42.5, 0])
 		m4_hole();
+}
+
+module levermountcountersinks() {
 	// holes for joystick bolt countersinks
 	translate([20, 42.5, 2])
 		m4_hole_countersink();
@@ -230,63 +165,111 @@ module levermountholes() {
 		m4_hole_countersink();
 }
 
-module base_topplate() {
-	cube([top_plate_x, top_plate_y, top_plate_z], center=true);
+module base_panel() {
+	difference() {
+		union() {
+			cube([panel_x, panel_y, panel_z], center=true);
+			// add posts that sink into the frame, just to give
+			// a somewhat more sturdy/tight connection
+			translate([panel_to_frame_point_x, panel_to_frame_point_y, -panel_z])
+				scale([1.5, 1.5, 0.1]) frame_hex_bolt_hole();
+			translate([-panel_to_frame_point_x, panel_to_frame_point_y, -panel_z])
+				scale([1.5, 1.5, 0.1]) frame_hex_bolt_hole();
+			translate([panel_to_frame_point_x, -panel_to_frame_point_y, -panel_z])
+				scale([1.5, 1.5, 0.1]) frame_hex_bolt_hole();
+			translate([-panel_to_frame_point_x, -panel_to_frame_point_y, -panel_z])
+				scale([1.5, 1.5, 0.1]) frame_hex_bolt_hole();
+		}
+		// the posts mentioned above need space for the actual hex bolts
+		// used in connecting to the frame
+		translate([panel_to_frame_point_x, panel_to_frame_point_y, -panel_z])
+			scale([1, 1, 0.1]) frame_hex_bolt_hole();
+		translate([-panel_to_frame_point_x, panel_to_frame_point_y, -panel_z])
+			scale([1, 1, 0.1]) frame_hex_bolt_hole();
+		translate([panel_to_frame_point_x, -panel_to_frame_point_y, -panel_z])
+			scale([1, 1, 0.1]) frame_hex_bolt_hole();
+		translate([-panel_to_frame_point_x, -panel_to_frame_point_y, -panel_z])
+			scale([1, 1, 0.1]) frame_hex_bolt_hole();
+	}
+
+}
+
+module base_bottom_panel() {
+	cube([panel_x, panel_y, panel_z], center=true);
+}
+
+module panel() {
+	difference() {
+		base_panel();
+		panel_holes();
+	}
+}
+
+module bottom_panel() {
+	difference() {
+		base_bottom_panel();
+		mirror([0, 0, 1]) panel_holes();
+	}
 }
 
 module overhang_plate() {
-	roundedcube([overhang_top_plate_x, overhang_top_plate_y, top_plate_z], center=true, radius=1);
+	roundedcube([overhang_panel_x, overhang_panel_y, panel_z], center=true, radius=1);
 }
 
-// this takes the base_topplate and makes it a small frame, putting a larger top plate
-module base_top_plate_with_raised_overhang() {
+// this takes the base_panel and makes it a small frame, putting a larger top plate
+module base_panel_with_raised_overhang() {
 	// make a frame out of the top plate (and keep the main plate on the center plane)
 	translate([0, 0, -5]) difference() {
-		base_topplate();
-		cube([top_plate_x-(panel_support_width*2), top_plate_y-(panel_support_width*2), top_plate_z*2], center=true);
+		base_panel();
+		cube([panel_x-(panel_support_width*2), panel_y-(panel_support_width*2), panel_z], center=true);
 	}
-	translate([plate_to_frame_point_x, plate_to_frame_point_y, -2.5]) resize([0, 0, 10]) frame_mount_column();
-	translate([-(plate_to_frame_point_x), plate_to_frame_point_y, -2.5]) resize([0, 0, 10]) frame_mount_column();
-	translate([plate_to_frame_point_x, -(plate_to_frame_point_y), -2.5]) resize([0, 0, 10]) frame_mount_column();
-	translate([-(plate_to_frame_point_x), -(plate_to_frame_point_y), -2.5]) resize([0, 0, 10]) frame_mount_column();
+	translate([panel_to_frame_point_x, panel_to_frame_point_y, -2.5]) resize([0, 0, 10])
+		frame_mount_column();
+	translate([-(panel_to_frame_point_x), panel_to_frame_point_y, -2.5]) resize([0, 0, 10])
+		rotate([0, 0, 90]) frame_mount_column();
+	translate([panel_to_frame_point_x, -(panel_to_frame_point_y), -2.5]) resize([0, 0, 10])
+		rotate([0, 0, 270]) frame_mount_column();
+	translate([-(panel_to_frame_point_x), -(panel_to_frame_point_y), -2.5]) resize([0, 0, 10])
+		rotate([0, 0, 180]) frame_mount_column();
 	overhang_plate();
 }
 
-module topplate() {
+module panel_with_raised_overhang() {
 	difference() {
-		base_topplate();
-		top_plate_holes();
-	}
-}
-
-module bottom_plate_with_overhang() {
-	difference() {
-		rotate([180, 0, 0]) base_top_plate_with_raised_overhang();
-		rotate([180, 0, 0]) top_plate_holes();
-	}
-}
-
-module top_plate_with_raised_overhang() {
-	difference() {
-		base_top_plate_with_raised_overhang();
-		top_plate_holes();
+		base_panel_with_raised_overhang();
+		panel_holes();
 	}
 }
 
 module frame_box() {
 	difference() {
-		roundedcube([frame_x, frame_y, frame_z], center=true, radius=3);
+		top_points = [
+			// top part, majority of shape
+			[(frame_x/2)-3, (frame_y/2)-3, panel_z/2],
+			[-(frame_x/2)+3, (frame_y/2)-3, panel_z/2],
+			[(frame_x/2)-3, -(frame_y/2)+3, panel_z/2],
+			[-(frame_x/2)+3, -(frame_y/2)+3, panel_z/2],
+		];
+		hull() {
+			for (p = top_points) {
+				translate(p) cylinder(r=3, h=frame_z-panel_z, center=true);
+			}
+		}
 		// cut out the middle to make it a box
-		cube([top_plate_x-(panel_support_width*2), top_plate_y-(panel_support_width*2), frame_z+5], center=true);
+		cube([panel_x-(panel_support_width*2), panel_y-(panel_support_width*2), frame_z+5], center=true);
 	}
 }
 
 module frame_mount_column() {
 	cube([20, 20, frame_z], center=true);
+	// add some corners back to do a lame chamfer
+	linear_extrude(height=frame_z, center=true)
+		polygon([[10, 10], [-20, 10], [10, -20]]);
 }
 
 module side_chopper() {
-	translate([frame_x/2+4, 0, 0]) cube([16, 2*(frame_y+top_plate_y), 2*(frame_z+top_plate_z)], center=true);
+	translate([(frame_x-frame_wall)/2+panel_overhang_amount, 0, 0])
+		cube([frame_wall+panel_overhang_amount*2, overhang_panel_y, frame_z], center=true);
 }
 
 module frame_connection_holes() {
@@ -307,21 +290,37 @@ module frame_cable_routing_hole() {
 
 module base_frame() {
 	frame_box();
-	translate([plate_to_frame_point_x, plate_to_frame_point_y, 0]) frame_mount_column();
-	translate([-plate_to_frame_point_x, plate_to_frame_point_y, 0]) frame_mount_column();
-	translate([plate_to_frame_point_x, -(plate_to_frame_point_y), 0]) frame_mount_column();
-	translate([-plate_to_frame_point_x, -(plate_to_frame_point_y), 0]) frame_mount_column();
+	translate([panel_to_frame_point_x, panel_to_frame_point_y, 0]) frame_mount_column();
+	translate([-panel_to_frame_point_x, panel_to_frame_point_y, 0]) rotate([0, 0, 90]) frame_mount_column();
+	translate([-panel_to_frame_point_x, -(panel_to_frame_point_y), 0]) rotate([0, 0, 180])  frame_mount_column();
+	translate([panel_to_frame_point_x, -(panel_to_frame_point_y), 0]) rotate([0, 0, 270])  frame_mount_column();
 }
 
 module frame() {
 	difference() {
 		base_frame();
-		translate([0, 0, frame_z/2]) scale([1, 1, 2]) base_topplate();
-		translate([0, 0, -frame_z/2]) scale([1, 1, 2]) base_topplate();
-		translate([plate_to_frame_point_x, plate_to_frame_point_y, 0]) frame_hex_bolt_hole();
-		translate([-plate_to_frame_point_x, plate_to_frame_point_y, 0]) frame_hex_bolt_hole();
-		translate([plate_to_frame_point_x, -plate_to_frame_point_y, 0]) frame_hex_bolt_hole();
-		translate([-plate_to_frame_point_x, -plate_to_frame_point_y, 0]) frame_hex_bolt_hole();
+		translate([0, 0, frame_z/2]) scale([1, 1, 2]) base_panel();
+		translate([0, 0, -frame_z/2]) scale([1, 1, 2]) base_panel();
+		translate([panel_to_frame_point_x, panel_to_frame_point_y, 0]) frame_hex_bolt_hole();
+		translate([-panel_to_frame_point_x, panel_to_frame_point_y, 0]) frame_hex_bolt_hole();
+		translate([panel_to_frame_point_x, -panel_to_frame_point_y, 0]) frame_hex_bolt_hole();
+		translate([-panel_to_frame_point_x, -panel_to_frame_point_y, 0]) frame_hex_bolt_hole();
+
+		// comfort bevel
+		translate([frame_x/2, 0, frame_z/2]) rotate([0, 45, 0]) cube([4, frame_y+0.01, 4], center=true);
+		translate([-frame_x/2, 0, frame_z/2]) rotate([0, 45, 0]) cube([4, frame_y+0.01, 4], center=true);
+		translate([0, frame_y/2, frame_z/2]) rotate([45, 0, 0]) cube([frame_x+0.01, 4, 4], center=true);
+		translate([0, -frame_y/2, frame_z/2]) rotate([45, 0, 0]) cube([frame_x+0.01, 4, 4], center=true);
+
+		// slightly larger holes than the posts in the base_panel
+		translate([panel_to_frame_point_x, panel_to_frame_point_y, frame_z/2-panel_z-5])
+			scale([1.55, 1.55, 0.2]) frame_hex_bolt_hole();
+		translate([-panel_to_frame_point_x, panel_to_frame_point_y, frame_z/2-panel_z-5])
+			scale([1.55, 1.55, 0.2]) frame_hex_bolt_hole();
+		translate([panel_to_frame_point_x, -panel_to_frame_point_y, frame_z/2-panel_z-5])
+			scale([1.55, 1.55, 0.2]) frame_hex_bolt_hole();
+		translate([-panel_to_frame_point_x, -panel_to_frame_point_y, frame_z/2-panel_z-5])
+			scale([1.55, 1.55, 0.2]) frame_hex_bolt_hole();
 	}
 }
 
@@ -368,18 +367,18 @@ module dir_arc_plus_w_24mm_8_button() {
 
 module dir_arc_30mm_thumb_button() {
 	// just my guesstimate on this one, but note that this is the same position as sega 2p (just mirrored)
-	translate([(top_plate_x/2)-28.06, (-top_plate_y/2)+62, 0]) button_30mm_hole();
+	translate([(panel_x/2)-28.06, (-panel_y/2)+62, 0]) button_30mm_hole();
 }
 
-module dir_arc_30mm() {
-	dir_arc_30mm_thumb_button();
+module dir_arc_30mm_finger_buttons() {
 	translate([0, 57.2, 0]) dir_arc_30mm_thumb_button();
 	translate([-33.8, 57.2+12.9, 0]) dir_arc_30mm_thumb_button();
 	translate([-33.8-34.8, 57.2+12.9, 0]) dir_arc_30mm_thumb_button();
 }
 
 module dir_arc_w_30mm() {
-	dir_arc_30mm();
+	dir_arc_30mm_thumb_button();
+	dir_arc_30mm_finger_buttons();
 	translate([-26.8, 57.2+12.9+34.5, 0]) dir_arc_30mm_thumb_button();
 }
 
@@ -391,7 +390,7 @@ module dir_arc_w_30mm_plus_one() {
 // Namco Noir (right hand)
 
 module noir_button_p1() {
-	translate([-top_plate_x/2, -top_plate_y/2, 0]) translate([35, 140, 0]) button_30mm_hole();
+	translate([-panel_x/2, -panel_y/2, 0]) translate([35, 140, 0]) button_30mm_hole();
 }
 
 module noir_plus_one() {
@@ -412,7 +411,7 @@ module noir_plus_one() {
 // Sega Astro City 2P (right hand)
 
 module sega_2p_p1() {
-	translate([-top_plate_x/2, -top_plate_y/2, 0]) translate([28.06, 140, 0]) button_30mm_hole();
+	translate([-panel_x/2, -panel_y/2, 0]) translate([28.06, 140, 0]) button_30mm_hole();
 }
 
 module sega_2p_6_button() {

src/frame-left.scad

@@ -1,21 +1,9 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
 module base_left_frame() {
@@ -36,16 +24,16 @@ module left_frame() {
 		frame_cable_routing_hole();
 
 		// aux button holes
-		translate([-30, 101.5, 0]) rotate([270, 0, 0]) button_24mm_hole();
-		translate([-30, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
-		translate([-70, 101.5, 0]) rotate([270, 0, 0]) button_24mm_hole();
-		translate([-70, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
-		translate([10, 101.5, 0]) rotate([270, 0, 0]) button_24mm_hole();
-		translate([10, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
+		translate([-35, 101.5, panel_z/2]) rotate([270, 0, 0]) aux_control_three_button_cluster();
+		translate([-35, (frame_y/2)-neutrik_panel_thickness-4, 1]) frame_cutout();
+		translate([-72, (frame_y/2)-neutrik_panel_thickness-4, 1]) frame_cutout();
+		translate([2, (frame_y/2)-neutrik_panel_thickness-4, 1]) frame_cutout();
 
 		// neutrix button hole
-		translate([70, (frame_y/2)-neutrik_panel_thickness, 0]) rotate([90, 0, 0]) neutrik_d_mount();
-		translate([70, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
+		translate([frame_center_to_neutrik, (frame_y/2)-neutrik_panel_thickness, panel_z/2])
+			rotate([90, 0, 0]) neutrik_d_mount();
+		translate([frame_center_to_neutrik, (frame_y/2)-neutrik_panel_thickness-4, 1])
+			frame_cutout();
 	}
 }
 

src/frame-middle.scad

@@ -1,21 +1,9 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
 module base_middle_frame() {
@@ -39,12 +27,15 @@ module middle_frame() {
 		mirror([1, 0, 0]) frame_cable_routing_hole();
 
 		// neutrik mounts for connector, switches
-		translate([0, (frame_y/2)-neutrik_panel_thickness, 0]) rotate([90, 0, 0]) neutrik_d_mount();
-		translate([0, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
-		translate([-40, (frame_y/2)-neutrik_panel_thickness, 0]) rotate([90, 0, 0]) neutrik_d_mount();
-		translate([-40, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
-		translate([40, (frame_y/2)-neutrik_panel_thickness, 0]) rotate([90, 0, 0]) neutrik_d_mount();
-		translate([40, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
+		translate([0, (frame_y/2)-neutrik_panel_thickness, panel_z/2])
+			rotate([90, 0, 0]) neutrik_d_mount();
+		translate([0, (frame_y/2)-neutrik_panel_thickness-4, 1]) frame_cutout();
+		translate([-40, (frame_y/2)-neutrik_panel_thickness, panel_z/2])
+			rotate([90, 0, 0]) neutrik_d_mount();
+		translate([-40, (frame_y/2)-neutrik_panel_thickness-4, 1]) frame_cutout();
+		translate([40, (frame_y/2)-neutrik_panel_thickness, panel_z/2])
+			rotate([90, 0, 0]) neutrik_d_mount();
+		translate([40, (frame_y/2)-neutrik_panel_thickness-4, 1]) frame_cutout();
 	}
 }
 

src/frame-right.scad

@@ -1,21 +1,9 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
 module base_right_frame() {
@@ -36,16 +24,16 @@ module right_frame() {
 		mirror([1, 0, 0]) frame_cable_routing_hole();
 
 		// aux button holes
-		translate([30, 101.5, 0]) rotate([270, 0, 0]) button_24mm_hole();
-		translate([30, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
-		translate([70, 101.5, 0]) rotate([270, 0, 0]) button_24mm_hole();
-		translate([70, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
-		translate([-10, 101.5, 0]) rotate([270, 0, 0]) button_24mm_hole();
-		translate([-10, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
+		translate([35, 101.5, panel_z/2]) rotate([270, 0, 0]) aux_control_three_button_cluster();
+		translate([35, (frame_y/2)-neutrik_panel_thickness-4, 1]) frame_cutout();
+		translate([72, (frame_y/2)-neutrik_panel_thickness-4, 1]) frame_cutout();
+		translate([-2, (frame_y/2)-neutrik_panel_thickness-4, 1]) frame_cutout();
 
 		// neutrix button hole
-		translate([-70, (frame_y/2)-neutrik_panel_thickness, 0]) rotate([90, 0, 0]) neutrik_d_mount();
-		translate([-70, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
+		translate([-frame_center_to_neutrik, (frame_y/2)-neutrik_panel_thickness, panel_z/2])
+			rotate([90, 0, 0]) neutrik_d_mount();
+		translate([-frame_center_to_neutrik, (frame_y/2)-neutrik_panel_thickness-4, 1])
+			frame_cutout();
 	}
 }
 

src/frame-solo.scad

@@ -1,21 +1,9 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
 module solo_frame() {
@@ -23,32 +11,25 @@ module solo_frame() {
 		frame();
 
 		// neutrik mounts for connector, switches
-		translate([0, (frame_y/2)-2.5, 0]) rotate([90, 0, 0]) neutrik_d_mount();
-		translate([0, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
-		translate([-40, (frame_y/2)-2.5, 0]) rotate([90, 0, 0]) neutrik_d_mount();
-		translate([-40, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
-		translate([40, (frame_y/2)-2.5, 0]) rotate([90, 0, 0]) neutrik_d_mount();
-		translate([40, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
+		translate([0, (frame_y/2)-2.5, panel_z/2]) rotate([90, 0, 0]) neutrik_d_mount();
+		translate([0, (frame_y/2)-neutrik_panel_thickness-4, 1]) frame_cutout();
+		translate([-40, (frame_y/2)-2.5, panel_z/2]) rotate([90, 0, 0]) neutrik_d_mount();
+		translate([-40, (frame_y/2)-neutrik_panel_thickness-4, 1]) frame_cutout();
+		translate([40, (frame_y/2)-2.5, panel_z/2]) rotate([90, 0, 0]) neutrik_d_mount();
+		translate([40, (frame_y/2)-neutrik_panel_thickness-4, 1]) frame_cutout();
 
 		// aux button holes
-		translate([-frame_x/2+2.5, 0, 0]) rotate([0, 0, 270])
-			translate([0, 0, 0]) rotate([90, 0, 0]) button_24mm_hole();
-		translate([(frame_x/2)-neutrik_panel_thickness-4, 0, 0]) rotate([0, 0, 90]) frame_cutout();
-		translate([-frame_x/2+2.5, 0, 0]) rotate([0, 0, 270])
-			translate([-40, 0, 0]) rotate([90, 0, 0]) button_24mm_hole();
-		translate([(frame_x/2)-neutrik_panel_thickness-4, -40, 0]) rotate([0, 0, 90]) frame_cutout();
-		translate([-frame_x/2+2.5, 0, 0]) rotate([0, 0, 270])
-			translate([40, 0, 0]) rotate([90, 0, 0]) button_24mm_hole();
-		translate([(frame_x/2)-neutrik_panel_thickness-4, 40, 0]) rotate([0, 0, 90]) frame_cutout();
-		translate([frame_x/2-2.5, 0, 0]) rotate([0, 0, 90])
-			translate([0, 0, 0]) rotate([90, 0, 0]) button_24mm_hole();
-		translate([-(frame_x/2)+neutrik_panel_thickness+4, 0, 0]) rotate([0, 0, 90]) frame_cutout();
-		translate([frame_x/2-2.5, 0, 0]) rotate([0, 0, 90])
-			translate([-40, 0, 0]) rotate([90, 0, 0]) button_24mm_hole();
-		translate([-(frame_x/2)+neutrik_panel_thickness+4, -40, 0]) rotate([0, 0, 90]) frame_cutout();
-		translate([frame_x/2-2.5, 0, 0]) rotate([0, 0, 90])
-			translate([40, 0, 0]) rotate([90, 0, 0]) button_24mm_hole();
-		translate([-(frame_x/2)+neutrik_panel_thickness+4, 40, 0]) rotate([0, 0, 90]) frame_cutout();
+		translate([-frame_x/2+2.5, 0, panel_z/2]) rotate([90, 0, 270])
+			aux_control_three_button_cluster();
+		translate([(frame_x/2)-neutrik_panel_thickness-4, 0, 1]) rotate([0, 0, 90]) frame_cutout();
+		translate([(frame_x/2)-neutrik_panel_thickness-4, -37, 1]) rotate([0, 0, 90]) frame_cutout();
+		translate([(frame_x/2)-neutrik_panel_thickness-4, 37, 1]) rotate([0, 0, 90]) frame_cutout();
+
+		translate([frame_x/2+2.5, 0, panel_z/2]) rotate([90, 0, 270])
+			aux_control_three_button_cluster();
+		translate([-(frame_x/2)+neutrik_panel_thickness+4, 0, 1]) rotate([0, 0, 90]) frame_cutout();
+		translate([-(frame_x/2)+neutrik_panel_thickness+4, -37, 1]) rotate([0, 0, 90]) frame_cutout();
+		translate([-(frame_x/2)+neutrik_panel_thickness+4, 37, 1]) rotate([0, 0, 90]) frame_cutout();
 	}
 }
 

src/misc-decorative-plate-24mm-button.scad

@@ -1,21 +1,9 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
 module button_24mm_decorative_plate() {

src/misc-decorative-plate-aux-connectors-neutrik-and-rocker-cluster.scad

@@ -0,0 +1,21 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <misc-neutrik-d-plate.scad>
+
+module aux_connectors_two_neutrik_cluster_decorative_plate() {
+	difference() {
+		hull() {
+			translate([-50, 0, 0]) neutrik_d_plate();
+			translate([50, 0, 0]) neutrik_d_plate();
+		}
+		translate([(frame_x/2)-frame_center_to_neutrik-frame_wall, 0, 0]) rocker_20mm_mount();
+		translate([-((frame_x/2)-frame_center_to_neutrik-frame_wall), 0, 0]) neutrik_d_mount();
+	}
+}
+
+aux_connectors_two_neutrik_cluster_decorative_plate();

src/misc-decorative-plate-aux-control-three-button-cluster.scad

@@ -0,0 +1,20 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <misc-neutrik-d-plate.scad>
+
+module aux_control_three_button_cluster_decorative_plate() {
+	difference() {
+		hull() {
+			translate([-44, 0, 0]) neutrik_d_plate();
+			translate([44, 0, 0]) neutrik_d_plate();
+		}
+		translate([0, 0, -10]) aux_control_three_button_cluster();
+	}
+}
+
+aux_control_three_button_cluster_decorative_plate();

src/misc-decorative-plate-dir_arc-plus-w-24mm-8-button.scad

@@ -1,21 +1,9 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
 module dir_arc_plus_w_24mm_8_button_decorative_plate() {

src/misc-decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one-plates.scad

@@ -0,0 +1,50 @@
+/*
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+decorative_radius_scale = 1.5;
+jumbo_decorative_radius_scale = 0;
+include <components.scad>
+
+module dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate_of_plates() {
+	difference() {
+		// get a 2mm slice of the bigger button cylinders
+		union() {
+			translate([-panel_x/2, 0, -25]) {
+				hull() union() {
+					dir_arc_30mm_finger_buttons();
+					translate([-26.8, 57.2+12.9+34.5, 0]) dir_arc_30mm_thumb_button();
+				}
+			}
+			translate([panel_x/2, 0, -25]) {
+				hull() sega_2p();
+			}
+			hull() {
+				translate([-panel_x/2, 0, -25]) dir_arc_30mm_thumb_button();
+				translate([panel_x/2, -19-9-11-19-9-11, -25]) sega_2p_p1();
+			}
+			difference() {
+				translate([-60, -8, 0]) cube(60, center=true);
+				translate([-98.35, -39.25, 0]) cylinder(h=50, r=48, $fn=50, center=true);
+			}
+			difference() {
+				translate([43.35, -10.30, 0]) cube(50, center=true);
+				translate([68.35, -35.30, 0]) cylinder(h=50, r=18, $fn=50, center=true);
+			}
+			difference() {
+				translate([-10, 55, 0]) cube(43, center=true);
+				translate([-5.15, 76.25, 0]) cylinder(h=50, r=27, $fn=50, center=true);
+			}
+			translate([-7, 0, 0]) cube(80, center=true);
+		}
+		translate([0, 0, -100]) cube([500, 500, 198], center=true);
+		translate([0, 0, 100]) cube([500, 500, 198], center=true);
+		// cut out the normal holes
+		translate([-panel_x/2, 0, -1]) dir_arc_w_30mm();
+		translate([panel_x/2, 0, -1]) sega_2p_plus_one();
+	}
+}
+
+dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate_of_plates();

src/misc-decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one.scad

@@ -1,35 +1,23 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
 module dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate() {
 	difference() {
 		// get a 2mm slice of the bigger button cylinders
 		union() {
-			translate([-top_plate_x/2, 0, -65]) dir_arc_w_30mm();
-			translate([top_plate_x/2, 0, -65]) sega_2p_plus_one();
+			translate([-panel_x/2, 0, -65]) dir_arc_w_30mm();
+			translate([panel_x/2, 0, -65]) sega_2p_plus_one();
 		}
 		translate([0, 0, -100]) cube([500, 500, 198], center=true);
 		translate([0, 0, 100]) cube([500, 500, 198], center=true);
 		// cut out the normal holes
-		translate([-top_plate_x/2, 0, -1]) dir_arc_w_30mm();
-		translate([top_plate_x/2, 0, -1]) sega_2p_plus_one();
+		translate([-panel_x/2, 0, -1]) dir_arc_w_30mm();
+		translate([panel_x/2, 0, -1]) sega_2p_plus_one();
 	}
 }
 

src/misc-decorative-plate-dir_arc-plus-w-30mm.scad

@@ -1,21 +1,9 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
 module dir_arc_plus_w_30mm_decorative_plate() {

src/misc-decorative-plate-sega-2p-6-button.scad

@@ -1,21 +1,9 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
 module sega_2p_6_button_decorative_plate() {

src/misc-decorative-plate-sega-2p-plus-one.scad

@@ -1,21 +1,9 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
 module sega_2p_plus_one_decorative_plate() {

src/misc-dustwasher-jlf.scad

@@ -1,21 +1,9 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
 module jlf_dustwasher() {

src/misc-dustwasher-lsx-nobi.scad

@@ -1,21 +1,9 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
 module lsx_nobi_dustwasher() {

src/misc-lever-mount-sanwa-seimitsu.scad

@@ -0,0 +1,16 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+
+module sanwa_seimitsu_lever_mount() {
+	difference() {
+		levermountbase();
+		levermountholes();
+	}
+}
+
+sanwa_seimitsu_lever_mount();

src/misc-neutrik-d-plate-20mm-hole.scad

@@ -1,30 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <components.scad>
-use <misc-neutrik-d-plate.scad>
-
-module neutrik_d_plate_20mm() {
-	difference() {
-		neutrik_d_plate();
-		cylinder(r=10+hole_tolerance, h=5, $fn=50, center=true);
-		cube([2.2, 22, 5], center=true);
-	}
-}
-
-neutrik_d_plate_20mm();

src/misc-neutrik-d-plate-24mm-hole.scad

@@ -1,28 +1,16 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 use <misc-neutrik-d-plate.scad>
 
 module neutrik_d_plate_24mm() {
 	difference() {
 		neutrik_d_plate();
-		cylinder(r=12+hole_tolerance, h=5, $fn=50, center=true);
+		neutrik_d_mount();
 	}
 }
 

src/misc-neutrik-d-plate.scad

@@ -1,21 +1,9 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
 module neutrik_d_plate() {

src/misc-rocker-20mm-plate.scad

@@ -0,0 +1,17 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <misc-neutrik-d-plate.scad>
+
+module rocker_plate_20mm() {
+	difference() {
+		neutrik_d_plate();
+		rocker_20mm_mount();
+	}
+}
+
+rocker_plate_20mm();

src/parameters.scad

@@ -0,0 +1,71 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+// adjustments
+hole_tolerance = 0.15;
+
+// M2
+m2_screw_selftap_radius = 0.95;
+
+// M3
+m3_screw_selftap_radius = 1.3;
+
+// M4
+m4_bolt_radius = 2 + hole_tolerance;
+m4_bolt_countersink_radius = 6.1 + hole_tolerance;
+m4_bolt_hex_exterior_radius = 3.6 + hole_tolerance;
+
+// 24mm button
+small_button_radius = 12 + hole_tolerance;
+
+// 30mm button
+big_button_radius = 15 + hole_tolerance;
+
+// JLF mount dimensions
+lever_mount_x = 53;
+lever_mount_y = 95;
+lever_mount_z = 2;
+
+// standard lever hole
+lever_plate_hole = 12;
+
+// case dimensions
+// base frame box. reminder: top of inside (including mounts) is chopped by panel_z for plates
+frame_x = 233;
+frame_y = 208;
+frame_z = 57;
+
+frame_center_to_neutrik = 70;
+
+// depth of the "lip" of the frame that the top plate sets into/supports the overhang
+frame_wall = 4;
+
+// per neutrik (mm)
+neutrik_panel_thickness = 3;
+
+// top plate, which can either be the whole plate ("inset") or the mounting frame for a plate that overhangs
+panel_x = frame_x - (frame_wall * 2);
+panel_y = frame_y - (frame_wall * 2);
+panel_z = 5;
+
+// how much the top plate x/y is expanded to overhang the frame
+// note that this is relative to the top plate (so the wall is added back)
+panel_overhang_amount = 8.5;
+overhang_panel_x = panel_x + (frame_wall * 2) + (panel_overhang_amount * 2);
+overhang_panel_y = panel_y + (frame_wall * 2) + (panel_overhang_amount * 2);
+
+panel_to_frame_point_x = (panel_x/2)-10;
+panel_to_frame_point_y = (panel_y/2)-10;
+
+// frame interior that supports the top plates
+panel_support_width = 5;
+
+// neutrik D screw holes
+neutrik_d_screw_radius = 1.6 + hole_tolerance;
+neutrik_d_radius = 12 + hole_tolerance;
+
+// additional button radius for decorative panels, etc.
+decorative_radius_scale = 1.75;
+jumbo_decorative_radius_scale = 2;

src/top-panel-inset-dir_arc-plus-w-30mm-plus-one-with-mount.scad

@@ -1,27 +1,15 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 use <top-panel-inset-dir_arc-plus-w-30mm-plus-one.scad>
 
 module dir_arc_w_30mm_plus_one_panel_with_mount() {
 	dir_arc_w_30mm_plus_one_panel();
-	translate([-15, -40, -(top_plate_z/2) - 3]) rotate([0, 0, -15]) pcb_mount();
+	translate([-15, -40, -(panel_z/2) - 3]) rotate([0, 0, -15]) pcb_mount();
 }
 
 dir_arc_w_30mm_plus_one_panel_with_mount();

src/top-panel-inset-dir_arc-plus-w-30mm-plus-one.scad

@@ -1,26 +1,14 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
 module dir_arc_w_30mm_plus_one_panel() {
 	difference() {
-		topplate();
+		panel();
 		dir_arc_w_30mm_plus_one();
 	}
 }

src/top-panel-inset-lever-and-dir_arc-plus-w-30mm.scad

@@ -1,31 +1,17 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
 module top_panel_inset_lever_and_dir_arc_w_30mm() {
 	difference() {
-		union() {
-			topplate();
-			translate([(-top_plate_x/2)+55, (top_plate_y/2)-75, -((top_plate_z/2)+(lever_mount_z/2))]) levermountbase();
-		}
+		panel();
 		dir_arc_w_30mm();
-		translate([(-top_plate_x/2)+55, (top_plate_y/2)-75, 0]) levermountholes();
+		translate([(-panel_x/2)+55, (panel_y/2)-75, 0]) levermountholes();
+		translate([(-panel_x/2)+55, (panel_y/2)-75, 0]) levermountcountersinks();
 	}
 }
 

src/top-panel-inset-lever-with-mount.scad

@@ -1,27 +1,15 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 use <top-panel-inset-lever.scad>
 
 module lever_panel_with_mount() {
 	lever_panel();
-	translate([0, -top_plate_y/2+25, -(top_plate_z/2) - 3]) pcb_mount();
+	translate([0, -panel_y/2+25, -(panel_z/2) - 3]) pcb_mount();
 }
 
 lever_panel_with_mount();

src/top-panel-inset-lever.scad

@@ -1,35 +1,19 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
 // combine the lever mount and generic plate, with mounting holes
 module lever_panel() {
 	difference() {
 		// base plate
-		union() {
-			translate([0,-20,0])
-				topplate();
-			translate([0, 0, -((top_plate_z/2)+(lever_mount_z/2))])
-				levermountbase();
-		}
+		translate([0,-20,0]) panel();
 		// holes to mount the lever
 		levermountholes();
+		levermountcountersinks();
 	}
 }
 

src/top-panel-inset-namco-noir-plus-one.scad

@@ -1,26 +1,14 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
 module namco_noir_plus_one_panel() {
 	difference() {
-		topplate();
+		panel();
 		noir_plus_one();
 	}
 }

src/top-panel-inset-namco-noir-plus-two.scad

@@ -1,26 +1,14 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
 module namco_noir_plus_two_panel() {
 	difference() {
-		topplate();
+		panel();
 		noir_plus_one();
 		translate([32.94-3.47-3.47, -78+7.37+4.49, 0]) noir_button_p1();
 	}

src/top-panel-inset-sega-2p-plus-one-plus-control-with-mount.scad

@@ -1,27 +1,15 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 use <top-panel-inset-sega-2p-plus-one-plus-control.scad>
 
 module top_panel_inset_sega_2p_plus_one_plus_control_with_mount() {
 	top_panel_inset_sega_2p_plus_one_plus_control();
-	translate([30, -50, -(top_plate_z/2) - 3]) pcb_mount();
+	translate([30, -50, -(panel_z/2) - 3]) pcb_mount();
 }
 
 top_panel_inset_sega_2p_plus_one_plus_control_with_mount();

src/top-panel-inset-sega-2p-plus-one-plus-control.scad

@@ -1,26 +1,14 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
 module top_panel_inset_sega_2p_plus_one_plus_control() {
 	difference() {
-		topplate();
+		panel();
 		sega_2p_plus_one();
 		rotate([0, 0, 180]) side_chopper();
 		translate([89, 30, 0]) button_24mm_hole();

src/top-panel-inset-sega-2p-plus-one.scad

@@ -1,26 +1,14 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
  */
 
+include <parameters.scad>
 include <components.scad>
 
 module sega_2p_plus_one_panel() {
 	difference() {
-		topplate();
+		panel();
 		sega_2p_plus_one();
 	}
 }

src/top-panel-left-lever-and-dir_arc-plus-w-30mm.scad

@@ -1,33 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <components.scad>
-
-module top_panel_left_lever_and_dir_arc_w_30mm() {
-	difference() {
-		union() {
-			top_plate_with_raised_overhang();
-			translate([(-top_plate_x/2)+55, (top_plate_y/2)-75, -((top_plate_z/2)+(lever_mount_z/2))]) levermountbase();
-		}
-		dir_arc_w_30mm();
-		side_chopper();
-		translate([(-top_plate_x/2)+55, (top_plate_y/2)-75, 0]) levermountholes();
-	}
-}
-
-top_panel_left_lever_and_dir_arc_w_30mm();

src/top-panel-left-lever.scad

@@ -1,35 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <components.scad>
-
-// combine the lever mount and generic plate, with mounting holes
-module top_panel_left_lever() {
-	difference() {
-		// base plate
-		union() {
-			translate([0,-20,0]) top_plate_with_raised_overhang();
-			translate([0, 0, -((top_plate_z/2)+(lever_mount_z/2))]) levermountbase();
-		}
-		// holes to mount the lever
-		levermountholes();
-		side_chopper();
-	}
-}
-
-top_panel_left_lever();

src/top-panel-middle-dir_arc-plus-w-30mm-with-mount.scad

@@ -1,27 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <components.scad>
-use <top-panel-middle-dir_arc-plus-w-30mm.scad>
-
-module top_panel_middle_dir_arc_w_30mm_with_mount() {
-	top_panel_middle_dir_arc_w_30mm();
-	translate([-15, -40, -(top_plate_z/2) - 3]) rotate([0, 0, -45]) pcb_mount();
-}
-
-top_panel_middle_dir_arc_w_30mm_with_mount();

src/top-panel-middle-dir_arc-plus-w-30mm.scad

@@ -1,30 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <components.scad>
-
-module top_panel_middle_dir_arc_w_30mm() {
-	difference() {
-		top_plate_with_raised_overhang();
-		dir_arc_w_30mm();
-		rotate([0, 0, 180]) side_chopper();
-		side_chopper();
-	}
-}
-
-top_panel_middle_dir_arc_w_30mm();

src/top-panel-overhang-left-lever-and-dir_arc-plus-w-30mm.scad

@@ -0,0 +1,19 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+
+module top_panel_left_lever_and_dir_arc_w_30mm() {
+	difference() {
+		panel_with_raised_overhang();
+		dir_arc_w_30mm();
+		side_chopper();
+		translate([(-panel_x/2)+55, (panel_y/2)-75, 0]) levermountholes();
+		translate([(-panel_x/2)+55, (panel_y/2)-75, 0]) levermountcountersinks();
+	}
+}
+
+top_panel_left_lever_and_dir_arc_w_30mm();

src/top-panel-overhang-left-lever.scad

@@ -0,0 +1,21 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+
+// combine the lever mount and generic plate, with mounting holes
+module top_panel_left_lever() {
+	difference() {
+		// base plate
+		panel_with_raised_overhang();
+		// holes to mount the lever
+		translate([0, 20, 0]) levermountholes();
+		translate([0, 20, 0]) levermountcountersinks();
+		side_chopper();
+	}
+}
+
+top_panel_left_lever();

src/top-panel-overhang-middle-dir_arc-plus-w-30mm-with-mount.scad

@@ -0,0 +1,15 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <top-panel-overhang-middle-dir_arc-plus-w-30mm.scad>
+
+module top_panel_middle_dir_arc_w_30mm_with_mount() {
+	top_panel_middle_dir_arc_w_30mm();
+	translate([-15, -40, -(panel_z/2) - 3]) rotate([0, 0, -45]) pcb_mount();
+}
+
+top_panel_middle_dir_arc_w_30mm_with_mount();

src/top-panel-overhang-middle-dir_arc-plus-w-30mm.scad

@@ -0,0 +1,18 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+
+module top_panel_middle_dir_arc_w_30mm() {
+	difference() {
+		panel_with_raised_overhang();
+		dir_arc_w_30mm();
+		rotate([0, 0, 180]) side_chopper();
+		side_chopper();
+	}
+}
+
+top_panel_middle_dir_arc_w_30mm();

src/top-panel-overhang-right-sega-2p-plus-one-plus-control-with-mount-with-oled.scad

@@ -0,0 +1,18 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <top-panel-overhang-right-sega-2p-plus-one-plus-control-with-mount.scad>
+
+module top_panel_right_sega_2p_plus_one_plus_control_with_mount_with_oled() {
+	difference() {
+		top_panel_right_sega_2p_plus_one_plus_control_with_mount();
+		translate([75, 77.5, 0]) oled_ssd1306_mount_cutout();
+	}
+	translate([75, 77.5, 0.5]) oled_ssd1306_mount();
+}
+
+top_panel_right_sega_2p_plus_one_plus_control_with_mount_with_oled();

src/top-panel-overhang-right-sega-2p-plus-one-plus-control-with-mount.scad

@@ -0,0 +1,15 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <top-panel-overhang-right-sega-2p-plus-one-plus-control.scad>
+
+module top_panel_right_sega_2p_plus_one_plus_control_with_mount() {
+	top_panel_right_sega_2p_plus_one_plus_control();
+	translate([30, -50, -(panel_z/2) - 3]) pcb_mount();
+}
+
+top_panel_right_sega_2p_plus_one_plus_control_with_mount();

src/top-panel-overhang-right-sega-2p-plus-one-plus-control.scad

@@ -0,0 +1,18 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+
+module top_panel_right_sega_2p_plus_one_plus_control() {
+	difference() {
+		panel_with_raised_overhang();
+		sega_2p_plus_one();
+		rotate([0, 0, 180]) side_chopper();
+		translate([89, 30, 0]) button_24mm_hole();
+	}
+}
+
+top_panel_right_sega_2p_plus_one_plus_control();

src/top-panel-overhang-right-sega-2p-plus-one-with-mount.scad

@@ -0,0 +1,15 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <top-panel-overhang-right-sega-2p-plus-one.scad>
+
+module top_panel_right_sega_2p_plus_one_with_mount() {
+	top_panel_right_sega_2p_plus_one();
+	translate([30, -50, -(panel_z/2) - 3]) pcb_mount();
+}
+
+top_panel_right_sega_2p_plus_one_with_mount();

src/top-panel-overhang-right-sega-2p-plus-one.scad

@@ -0,0 +1,17 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+
+module top_panel_right_sega_2p_plus_one() {
+	difference() {
+		panel_with_raised_overhang();
+		sega_2p_plus_one();
+		rotate([0, 0, 180]) side_chopper();
+	}
+}
+
+top_panel_right_sega_2p_plus_one();

src/top-panel-overhang-solo-dir_arc-24mm-6-button.scad

@@ -0,0 +1,16 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+
+module dir_arc_24mm_6_button_panel() {
+	difference() {
+		panel_with_raised_overhang();
+		translate([-71.5, -panel_y/2+122.5, 0]) dir_arc_24mm_6_button();
+	}
+}
+
+dir_arc_24mm_6_button_panel();

src/top-panel-overhang-solo-dir_arc-plus-w-24mm-8-button.scad

@@ -0,0 +1,16 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+
+module dir_arc_plus_w_24mm_8_button_panel() {
+	difference() {
+		panel_with_raised_overhang();
+		translate([-80.5, panel_y/6, 0]) dir_arc_plus_w_24mm_8_button();
+	}
+}
+
+dir_arc_plus_w_24mm_8_button_panel();

src/top-panel-overhang-solo-lever-and-sega-2p-6-button.scad

@@ -0,0 +1,21 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+
+module top_panel_solo_lever_and_sega_2p_6_button() {
+	difference() {
+		// base plate
+		union() {
+			panel_with_raised_overhang();
+			translate([-60, 18, -((panel_z/2)+(lever_mount_z/2))]) levermountbase();
+		}
+		translate([95, -20, 0]) sega_2p_6_button();
+		translate([-60, 18, 0]) levermountholes();
+	}
+}
+
+top_panel_solo_lever_and_sega_2p_6_button();

src/top-panel-right-sega-2p-plus-one-plus-control-with-mount-with-oled.scad

@@ -1,30 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <components.scad>
-use <top-panel-right-sega-2p-plus-one-plus-control-with-mount.scad>
-
-module top_panel_right_sega_2p_plus_one_plus_control_with_mount_with_oled() {
-	difference() {
-		top_panel_right_sega_2p_plus_one_plus_control_with_mount();
-		translate([75, 77.5, 0]) oled_ssd1306_mount_cutout();
-	}
-	translate([75, 77.5, 0.5]) oled_ssd1306_mount();
-}
-
-top_panel_right_sega_2p_plus_one_plus_control_with_mount_with_oled();

src/top-panel-right-sega-2p-plus-one-plus-control-with-mount.scad

@@ -1,27 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <components.scad>
-use <top-panel-right-sega-2p-plus-one-plus-control.scad>
-
-module top_panel_right_sega_2p_plus_one_plus_control_with_mount() {
-	top_panel_right_sega_2p_plus_one_plus_control();
-	translate([30, -50, -(top_plate_z/2) - 3]) pcb_mount();
-}
-
-top_panel_right_sega_2p_plus_one_plus_control_with_mount();

src/top-panel-right-sega-2p-plus-one-plus-control.scad

@@ -1,30 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <components.scad>
-
-module top_panel_right_sega_2p_plus_one_plus_control() {
-	difference() {
-		top_plate_with_raised_overhang();
-		sega_2p_plus_one();
-		rotate([0, 0, 180]) side_chopper();
-		translate([89, 30, 0]) button_24mm_hole();
-	}
-}
-
-top_panel_right_sega_2p_plus_one_plus_control();

src/top-panel-right-sega-2p-plus-one-with-mount.scad

@@ -1,27 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <components.scad>
-use <top-panel-right-sega-2p-plus-one.scad>
-
-module top_panel_right_sega_2p_plus_one_with_mount() {
-	top_panel_right_sega_2p_plus_one();
-	translate([30, -50, -(top_plate_z/2) - 3]) pcb_mount();
-}
-
-top_panel_right_sega_2p_plus_one_with_mount();

src/top-panel-right-sega-2p-plus-one.scad

@@ -1,29 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <components.scad>
-
-module top_panel_right_sega_2p_plus_one() {
-	difference() {
-		top_plate_with_raised_overhang();
-		sega_2p_plus_one();
-		rotate([0, 0, 180]) side_chopper();
-	}
-}
-
-top_panel_right_sega_2p_plus_one();

src/top-panel-solo-dir_arc-24mm-6-button.scad

@@ -1,28 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <components.scad>
-
-module dir_arc_24mm_6_button_panel() {
-	difference() {
-		top_plate_with_raised_overhang();
-		translate([-71.5, -top_plate_y/2+122.5, 0]) dir_arc_24mm_6_button();
-	}
-}
-
-dir_arc_24mm_6_button_panel();

src/top-panel-solo-dir_arc-plus-w-24mm-8-button.scad

@@ -1,28 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <components.scad>
-
-module dir_arc_plus_w_24mm_8_button_panel() {
-	difference() {
-		top_plate_with_raised_overhang();
-		translate([-80.5, top_plate_y/6, 0]) dir_arc_plus_w_24mm_8_button();
-	}
-}
-
-dir_arc_plus_w_24mm_8_button_panel();

src/top-panel-solo-lever-and-sega-2p-6-button.scad

@@ -1,33 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <components.scad>
-
-module top_panel_solo_lever_and_sega_2p_6_button() {
-	difference() {
-		// base plate
-		union() {
-			top_plate_with_raised_overhang();
-			translate([-60, 18, -((top_plate_z/2)+(lever_mount_z/2))]) levermountbase();
-		}
-		translate([95, -20, 0]) sega_2p_6_button();
-		translate([-60, 18, 0]) levermountholes();
-	}
-}
-
-top_panel_solo_lever_and_sega_2p_6_button();