bss/buildable-stick-system
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 11 Wiki Activity

Compare commits

base: bss:fa05469e1962129536de7ae8a1e6698a3e54b24f
Branches Tags
bss:main
bss:build123d-experimental
bss:v4.7.1
bss:v4.7.0
bss:v4.6.0
bss:v4.5.0
bss:v4.4.3
bss:v4.4.2
bss:v4.4.1
bss:v4.4.0
bss:v4.3.1
bss:v4.3.0
bss:v4.2.1
bss:v4.2.0
bss:v4.1.0
bss:v4.0.0
bss:v3.3.1
bss:v3.3.0
bss:v3.2.0
bss:v3.1.1
bss:v3.1.0
bss:v3.0.0
bss:v2.0.1
bss:v2.0.0
bss:v1.0.0
...
compare: bss:ecc3ffbb545768e90c5539775a0b3b4cbb4d211e
Branches Tags
bss:main
bss:build123d-experimental
bss:v4.7.1
bss:v4.7.0
bss:v4.6.0
bss:v4.5.0
bss:v4.4.3
bss:v4.4.2
bss:v4.4.1
bss:v4.4.0
bss:v4.3.1
bss:v4.3.0
bss:v4.2.1
bss:v4.2.0
bss:v4.1.0
bss:v4.0.0
bss:v3.3.1
bss:v3.3.0
bss:v3.2.0
bss:v3.1.1
bss:v3.1.0
bss:v3.0.0
bss:v2.0.1
bss:v2.0.0
bss:v1.0.0

8 Commits
fa05469e19 ... ecc3ffbb54

Author SHA1 Message Date
Brian S. Stephan
ecc3ffbb54
restore side-windowed.scad lost from previous commit 2024-12-18 14:08:46 -06:00
Brian S. Stephan
73b55861b6
remove the box frame pieces, all pieces are of the extended lineage 
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
 2024-12-18 13:43:14 -06:00
Brian S. Stephan
439333c154
remove imports of the box pieces, and duplicate them into "extended" pieces 
this is the next step in getting rid of the 45 degree angle "box" pieces

Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
 2024-12-18 13:27:24 -06:00
Brian S. Stephan
ef16559b95
ensure the frame solid has the proper, complete dimensions 
something about the sharp corners of the default cylinder was slightly
shrinking the overall solid by a fraction of a mm. I thought this was a
defect of how I was chopping pieces, but no, it was the core solid. this
shouldn't be a reason to rebuild anything, but it makes the models
slightly more consistent, especially when looking at the STLs

Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
 2024-12-04 14:24:47 -06:00
Brian S. Stephan
2880018913
add a simple side for the extended frame pieces 
I'm thinking the "extended" pieces become the only pieces soon, this is
one step closer to it

Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
 2024-12-04 13:36:33 -06:00
Brian S. Stephan
ca928932ba
rename front/back pieces for clarity, part 1 
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
 2024-12-04 13:03:08 -06:00
Brian S. Stephan
8b4cc0b182
fail the build (and thus make) if openscad failed 
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
 2024-12-04 11:25:51 -06:00
Brian S. Stephan
a6b5d77671
rename some various extended pieces to make room for the simple side 
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
 2024-12-04 11:25:00 -06:00
34 changed files with 142 additions and 232 deletions
Show Stats Expand all files Collapse all files

2
build.py
View File

@ -48,3 +48,5 @@ for root, dirs, files in os.walk('.'):
for process in processes:
process.wait()
if process.returncode != 0:
raise Exception(f"building {process.args} failed")

19
demo/all-together-demo-extended-with-windows.scad
View File

@ -5,10 +5,9 @@
include <parameters.scad>
include <components.scad>
use <frames/pieces/extended/front-or-back.scad>
use <frames/pieces/extended/side.scad>
use <frames/pieces/extended/front-or-back-clean-for-extended-side-aux-and-neutrik.scad>
use <frames/pieces/extended/front-or-back-clean-for-extended-side-windowed-horiz-stripes.scad>
use <frames/pieces/side-trapezoid.scad>
use <frames/pieces/front-or-back-aux-and-neutrik.scad>
use <frames/pieces/front-or-back-windowed-horiz-stripes.scad>
use <panels/inset/lever-and-dir_arc-plus-w-30mm-panel.scad>
use <panels/inset/sega-2p-nine-plus-control-panel-with-mount.scad>
use <misc/decorative-plate-24mm-button.scad>
@ -23,12 +22,12 @@ top_deco_color = "#8E9089";
color(top_panel_color) translate([-panel_x/2, 0, frame_z/2-panel_z+0.01]) lever_and_dir_arc_w_30mm_panel();
color(top_panel_color) translate([panel_x/2, 0, frame_z/2-panel_z+0.01]) sega_2p_nine_plus_control_panel_with_mount();
color(frame_side_color) translate([-frame_x/2+4, 0, -2.5]) extended_left_or_right_frame_piece();
color(frame_side_color) translate([frame_x/2-4, 0, -2.5]) mirror([1, 0, 0]) extended_left_or_right_frame_piece();
color(frame_top_bottom_color) translate([-frame_x/2+4, 0, -2.5]) horiz_striped_windowed_front_or_back_box_frame_piece_for_extended_side();
color(frame_top_bottom_color) translate([frame_x/2-4, 0, -2.5]) horiz_striped_windowed_front_or_back_box_frame_piece_for_extended_side();
color(frame_top_bottom_color) translate([-frame_x/2+4, 0, -2.5]) rotate([180, 0, 0]) front_or_back_aux_and_neutrik_box_frame_piece_for_extended_side();
color(frame_top_bottom_color) translate([frame_x/2-4, 0, -2.5]) rotate([180, 180, 0]) front_or_back_aux_and_neutrik_box_frame_piece_for_extended_side();
color(frame_side_color) translate([-frame_x/2+4, 0, -2.5]) side_trapezoid_frame_piece();
color(frame_side_color) translate([frame_x/2-4, 0, -2.5]) mirror([1, 0, 0]) side_trapezoid_frame_piece();
color(frame_top_bottom_color) translate([-frame_x/2+4, 0, -2.5]) horiz_striped_windowed_front_or_back_frame_piece();
color(frame_top_bottom_color) translate([frame_x/2-4, 0, -2.5]) horiz_striped_windowed_front_or_back_frame_piece();
color(frame_top_bottom_color) translate([-frame_x/2+4, 0, -2.5]) rotate([180, 0, 0]) front_or_back_aux_and_neutrik_frame_piece();
color(frame_top_bottom_color) translate([frame_x/2-4, 0, -2.5]) rotate([180, 180, 0]) front_or_back_aux_and_neutrik_frame_piece();
color(bottom_panel_color) translate([-panel_x/2, 0, -5-frame_z/2+5]) panel();
color(bottom_panel_color) translate([panel_x/2, 0, -5-frame_z/2+5]) panel();

18
demo/all-together-demo-extended.scad
View File

@ -5,9 +5,9 @@
include <parameters.scad>
include <components.scad>
use <frames/pieces/extended/front-or-back.scad>
use <frames/pieces/extended/side-extended-to-front.scad>
use <frames/pieces/extended/front-or-back-clean-for-extended-side-aux-and-neutrik.scad>
use <frames/pieces/front-or-back-trapezoid.scad>
use <frames/pieces/side-trapezoid-extended-to-front-trapezoid.scad>
use <frames/pieces/front-or-back-aux-and-neutrik.scad>
use <panels/inset/lever-and-dir_arc-plus-w-30mm-panel.scad>
use <panels/inset/sega-2p-nine-plus-control-panel-with-mount.scad>
use <misc/decorative-plate-24mm-button.scad>
@ -22,12 +22,12 @@ top_deco_color = "#8E9089";
color(top_panel_color) translate([-panel_x/2, 0, frame_z/2-panel_z+0.01]) lever_and_dir_arc_w_30mm_panel();
color(top_panel_color) translate([panel_x/2, 0, frame_z/2-panel_z+0.01]) sega_2p_nine_plus_control_panel_with_mount();
color(frame_side_color) translate([-frame_x/2+4, 0, -2.5]) extra_extended_left_or_right_frame_piece();
color(frame_side_color) translate([frame_x/2-4, 0, -2.5]) mirror([1, 0, 0]) extra_extended_left_or_right_frame_piece();
color(frame_top_bottom_color) translate([-frame_x/2+4, 0, -2.5]) extended_front_or_back_frame_piece();
color(frame_top_bottom_color) translate([frame_x/2-4, 0, -2.5]) extended_front_or_back_frame_piece();
color(frame_top_bottom_color) translate([-frame_x/2+4, 0, -2.5]) rotate([180, 0, 0]) front_or_back_aux_and_neutrik_box_frame_piece_for_extended_side();
color(frame_top_bottom_color) translate([frame_x/2-4, 0, -2.5]) rotate([180, 180, 0]) front_or_back_aux_and_neutrik_box_frame_piece_for_extended_side();
color(frame_side_color) translate([-frame_x/2+4, 0, -2.5]) side_trapezoid_extended_to_front_frame_piece();
color(frame_side_color) translate([frame_x/2-4, 0, -2.5]) mirror([1, 0, 0]) side_trapezoid_extended_to_front_frame_piece();
color(frame_top_bottom_color) translate([-frame_x/2+4, 0, -2.5]) front_or_back_trapezoid_frame_piece();
color(frame_top_bottom_color) translate([frame_x/2-4, 0, -2.5]) front_or_back_trapezoid_frame_piece();
color(frame_top_bottom_color) translate([-frame_x/2+4, 0, -2.5]) rotate([180, 0, 0]) front_or_back_aux_and_neutrik_frame_piece();
color(frame_top_bottom_color) translate([frame_x/2-4, 0, -2.5]) rotate([180, 180, 0]) front_or_back_aux_and_neutrik_frame_piece();
color(bottom_panel_color) translate([-panel_x/2, 0, -5-frame_z/2+5]) panel();
color(bottom_panel_color) translate([panel_x/2, 0, -5-frame_z/2+5]) panel();

14
demo/all-together-demo-solo.scad
View File

@ -5,9 +5,9 @@
include <parameters.scad>
include <components.scad>
use <frames/pieces/extended/front-or-back.scad>
use <frames/pieces/extended/side-extended-to-front.scad>
use <frames/pieces/extended/front-or-back-clean-for-extended-side-aux-and-neutrik.scad>
use <frames/pieces/front-or-back-trapezoid.scad>
use <frames/pieces/side-trapezoid-extended-to-front-trapezoid.scad>
use <frames/pieces/front-or-back-aux-and-neutrik.scad>
use <panels/inset/lever-and-dir_arc-plus-w-30mm-panel.scad>
use <panels/inset/lever-and-sega-2p-6-button-panel-with-aux-with-mount.scad>
use <misc/dustwasher-jlf.scad>
@ -19,10 +19,10 @@ frame_side_color = "#8E9089";
top_deco_color = "#000000";
color(top_panel_color) translate([0, 0, frame_z/2-panel_z+0.01]) lever_and_sega_2p_6_button_panel_with_aux_with_mount();
color(frame_side_color) translate([0, 0, -2.5]) extra_extended_left_or_right_frame_piece();
color(frame_side_color) translate([0, 0, -2.5]) mirror([1, 0, 0]) extra_extended_left_or_right_frame_piece();
color(frame_top_bottom_color) translate([0, 0, -2.5]) extended_front_or_back_frame_piece();
color(frame_top_bottom_color) translate([0, 0, -2.5]) rotate([180, 0, 0]) front_or_back_aux_and_neutrik_box_frame_piece_for_extended_side();
color(frame_side_color) translate([0, 0, -2.5]) side_trapezoid_extended_to_front_frame_piece();
color(frame_side_color) translate([0, 0, -2.5]) mirror([1, 0, 0]) side_trapezoid_extended_to_front_frame_piece();
color(frame_top_bottom_color) translate([0, 0, -2.5]) front_or_back_trapezoid_frame_piece();
color(frame_top_bottom_color) translate([0, 0, -2.5]) rotate([180, 0, 0]) front_or_back_aux_and_neutrik_frame_piece();
color(bottom_panel_color) translate([0, 0, -5-frame_z/2+5]) panel();
color(top_deco_color) translate([-65, 5, 3+frame_z/2-panel_z]) jlf_dustwasher();

18
demo/all-together-demo.scad
View File

@ -5,9 +5,9 @@
include <parameters.scad>
include <components.scad>
use <frames/pieces/box/side.scad>
use <frames/pieces/box/front-or-back.scad>
use <frames/pieces/box/front-or-back-aux-and-neutrik.scad>
use <frames/pieces/side.scad>
use <frames/pieces/front-or-back.scad>
use <frames/pieces/front-or-back-aux-and-neutrik.scad>
use <panels/inset/lever-and-dir_arc-plus-w-30mm-panel.scad>
use <panels/inset/sega-2p-nine-plus-control-panel-with-mount.scad>
use <misc/decorative-plate-24mm-button.scad>
@ -20,12 +20,12 @@ top_deco_color = "white";
color(panel_color) translate([-panel_x/2, 0, frame_z/2-panel_z+0.01]) lever_and_dir_arc_w_30mm_panel();
color(panel_color) translate([panel_x/2, 0, frame_z/2-panel_z+0.01]) sega_2p_nine_plus_control_panel_with_mount();
color(base_color) translate([panel_x/2, 0, -2.5]) rotate([0, 180, 0]) side_box_frame_piece();
color(base_color) translate([-panel_x/2, 0, -2.5]) side_box_frame_piece();
color(base_color) translate([panel_x/2, 0, -2.5]) front_or_back_box_frame_piece();
color(base_color) translate([-panel_x/2, 0, -2.5]) front_or_back_box_frame_piece();
color(base_color) translate([panel_x/2, 0, -2.5]) rotate([180, 180, 0]) front_or_back_aux_and_neutrik_box_frame_piece();
color(base_color) translate([-panel_x/2, 0, -2.5]) rotate([180, 180, 0]) front_or_back_aux_and_neutrik_box_frame_piece();
color(base_color) translate([panel_x/2, 0, -2.5]) rotate([0, 180, 0]) side_frame_piece();
color(base_color) translate([-panel_x/2, 0, -2.5]) side_frame_piece();
color(base_color) translate([panel_x/2, 0, -2.5]) front_or_back_frame_piece();
color(base_color) translate([-panel_x/2, 0, -2.5]) front_or_back_frame_piece();
color(base_color) translate([panel_x/2, 0, -2.5]) rotate([180, 180, 0]) front_or_back_aux_and_neutrik_frame_piece();
color(base_color) translate([-panel_x/2, 0, -2.5]) rotate([180, 180, 0]) front_or_back_aux_and_neutrik_frame_piece();
color(base_color) translate([-panel_x/2, 0, -5-frame_z/2+5]) panel();
color(base_color) translate([panel_x/2, 0, -5-frame_z/2+5]) panel();

18
demo/blown-up-demo.scad
View File

@ -6,9 +6,9 @@
include <parameters.scad>
include <components.scad>
use <frames/pieces/interconnect.scad>
use <frames/pieces/box/side.scad>
use <frames/pieces/box/front-or-back.scad>
use <frames/pieces/box/front-or-back-aux-and-neutrik.scad>
use <frames/pieces/side.scad>
use <frames/pieces/front-or-back.scad>
use <frames/pieces/front-or-back-aux-and-neutrik.scad>
use <panels/overhang/left-lever-and-dir_arc-plus-w-30mm-panel.scad>
use <panels/overhang/right-sega-2p-nine-plus-control-panel-with-mount.scad>
use <panels/overhang/left-or-right-panel.scad>
@ -18,12 +18,12 @@ use <misc/dustwasher-lsx-nobi.scad>
color("#C12E1F") translate([-panel_x/2-25, 0, frame_z/2+75]) lever_and_dir_arc_w_30mm_left_overhang_panel();
color("#C12E1F") translate([panel_x/2+25, 0, frame_z/2+75]) sega_2p_nine_plus_control_right_overhang_panel_with_mount();
color("black") translate([-frame_x/2+5-25, -55, -2.5]) front_or_back_box_frame_piece();
color("black") rotate([0, 180, 0]) translate([-frame_x/2+5-25, -55, -2.5]) front_or_back_box_frame_piece();
color("black") translate([-frame_x/2+5-50, 0, -2.5]) side_box_frame_piece();
color("black") rotate([0, 180, 0]) translate([-frame_x/2+5-50, 0, -2.5]) side_box_frame_piece();
color("black") rotate([180, 0, 0]) translate([-frame_x/2+5-25, -55, -2.5]) front_or_back_aux_and_neutrik_box_frame_piece();
color("black") rotate([180, 0, 0]) rotate([0, 180, 0]) translate([-frame_x/2+5-25, -55, -2.5]) front_or_back_aux_and_neutrik_box_frame_piece();
color("black") translate([-frame_x/2+5-25, -55, -2.5]) front_or_back_frame_piece();
color("black") rotate([0, 180, 0]) translate([-frame_x/2+5-25, -55, -2.5]) front_or_back_frame_piece();
color("black") translate([-frame_x/2+5-50, 0, -2.5]) side_frame_piece();
color("black") rotate([0, 180, 0]) translate([-frame_x/2+5-50, 0, -2.5]) side_frame_piece();
color("black") rotate([180, 0, 0]) translate([-frame_x/2+5-25, -55, -2.5]) front_or_back_aux_and_neutrik_frame_piece();
color("black") rotate([180, 0, 0]) rotate([0, 180, 0]) translate([-frame_x/2+5-25, -55, -2.5]) front_or_back_aux_and_neutrik_frame_piece();
color("black") rotate([0, 180, 0]) interconnect_frame_piece();
color("#C12E1F") translate([-panel_x/2-25, 0, -5-frame_z/2-75]) left_or_right_overhang_panel();
color("#C12E1F") mirror([0, 1, 0]) translate([panel_x/2+25, 0, -5-frame_z/2-75]) rotate([0, 0, 180])

6
src/components.scad
View File

@ -274,13 +274,13 @@ module frame_solid() {
];
hull() {
for (p = top_points) {
translate(p) cylinder(r=2, h=frame_bevel_height, center=true);
translate(p) cylinder(r=2, h=frame_bevel_height, center=true, $fn=4);
}
for (p = base_points) {
translate(p) cylinder(r=2, h=frame_z-(frame_bevel_height*2), center=true);
translate(p) cylinder(r=2, h=frame_z-(frame_bevel_height*2), center=true, $fn=4);
}
for (p = bottom_points) {
translate(p) cylinder(r=2, h=frame_bevel_height, center=true);
translate(p) cylinder(r=2, h=frame_bevel_height, center=true, $fn=4);
}
}
}

2
src/extras/bss-ae/extended-back.scad
View File

@ -6,7 +6,7 @@
include <parameters.scad>
include <components.scad>
use <frames/pieces/extended/front-or-back.scad>
use <frames/pieces/front-or-back-trapezoid.scad>
module back_piece_extension() {
// combine the original wall with a copy to "pull" the wall out

6
src/extras/bss-ae/extended-side-no-back.scad
View File

@ -7,8 +7,8 @@
include <parameters.scad>
include <components.scad>
use <frames/complete/left-frame.scad>
use <frames/pieces/box/side.scad>
use <frames/pieces/extended/front-or-back.scad>
use <frames/pieces/side.scad>
use <frames/pieces/front-or-back-trapezoid.scad>
module side_frame_piece_wall() {
// this doesn't use the side_frame_piece because of the 45 degree angle geometry
@ -43,7 +43,7 @@ module extra_extended_left_or_right_frame_piece() {
difference() {
union() {
difference() {
side_box_frame_piece();
side_frame_piece();
// chop off the old edge which is getting replaced with the extension
translate([-frame_x/2+frame_bevel_height/2, 0, 0])
cube([frame_bevel_height, frame_y, frame_z], center=true);

4
src/extras/bss-ae/interconnect-x.scad
View File

@ -6,11 +6,11 @@
include <parameters.scad>
include <components.scad>
use <frames/pieces/box/front-or-back.scad>
use <frames/pieces/front-or-back.scad>
module interconnect_frame_half_piece() {
translate([0, frame_y/2-frame_wall, 0]) difference() {
front_or_back_box_frame_piece();
front_or_back_frame_piece();
translate([0, (-frame_y+frame_wall)/2-panel_overhang_amount, 0])
cube([overhang_panel_x, frame_wall+panel_overhang_amount*2, frame_z], center=true);
}

28
src/frames/pieces/extended/front-or-back-clean-for-extended-side-aux-and-neutrik.scad
View File

@ -1,28 +0,0 @@
/*
* SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
* SPDX-License-Identifier: GPL-3.0-or-later
*/
include <parameters.scad>
include <components.scad>
use <front-or-back-clean-for-extended-side.scad>
module front_or_back_aux_and_neutrik_box_frame_piece_for_extended_side() {
difference() {
front_or_back_box_frame_piece_for_extended_side();
// aux button holes
translate([-35.25, -101.5, 0]) rotate([90, 0, 0]) aux_control_three_button_cluster();
translate([-35.25, -(frame_y/2)+neutrik_panel_thickness+4, 0]) frame_cutout();
translate([-72.25, -(frame_y/2)+neutrik_panel_thickness+4, 0]) frame_cutout();
translate([2, -(frame_y/2)+neutrik_panel_thickness+4, 0]) frame_cutout();
// neutrix button hole
translate([frame_center_to_neutrik, -(frame_y/2)+neutrik_panel_thickness, 0])
rotate([270, 0, 0]) neutrik_d_mount();
translate([frame_center_to_neutrik, -(frame_y/2)+neutrik_panel_thickness+4, 0])
frame_cutout();
}
}
front_or_back_aux_and_neutrik_box_frame_piece_for_extended_side();

18
src/frames/pieces/extended/front-or-back-clean-for-extended-side-windowed-backslashes.scad
View File

@ -1,18 +0,0 @@
/*
* SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
* SPDX-License-Identifier: GPL-3.0-or-later
*/
include <parameters.scad>
include <components.scad>
use <frames/pieces/box/front-or-back-windowed-backslashes.scad>
module backslashes_windowed_front_or_back_box_frame_piece_for_extended_side() {
difference() {
backslashes_windowed_front_or_back_box_frame_piece();
// ...minus the frame wall and lip on the left
translate([-frame_x/2+frame_wall/2, 0, 0]) cube([frame_wall, frame_y, frame_z], center=true);
}
}
backslashes_windowed_front_or_back_box_frame_piece_for_extended_side();

18
src/frames/pieces/extended/front-or-back-clean-for-extended-side-windowed-forwardslashes.scad
View File

@ -1,18 +0,0 @@
/*
* SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
* SPDX-License-Identifier: GPL-3.0-or-later
*/
include <parameters.scad>
include <components.scad>
use <frames/pieces/box/front-or-back-windowed-forwardslashes.scad>
module forwardslashes_windowed_front_or_back_box_frame_piece_for_extended_side() {
difference() {
forwardslashes_windowed_front_or_back_box_frame_piece();
// ...minus the frame wall and lip on the left
translate([-frame_x/2+frame_wall/2, 0, 0]) cube([frame_wall, frame_y, frame_z], center=true);
}
}
forwardslashes_windowed_front_or_back_box_frame_piece_for_extended_side();

18
src/frames/pieces/extended/front-or-back-clean-for-extended-side-windowed-horiz-stripes.scad
View File

@ -1,18 +0,0 @@
/*
* SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
* SPDX-License-Identifier: GPL-3.0-or-later
*/
include <parameters.scad>
include <components.scad>
use <frames/pieces/box/front-or-back-windowed-horiz-stripes.scad>
module horiz_striped_windowed_front_or_back_box_frame_piece_for_extended_side() {
difference() {
horiz_striped_windowed_front_or_back_box_frame_piece();
// ...minus the frame wall and lip on the left
translate([-frame_x/2+frame_wall/2, 0, 0]) cube([frame_wall, frame_y, frame_z], center=true);
}
}
horiz_striped_windowed_front_or_back_box_frame_piece_for_extended_side();

18
src/frames/pieces/extended/front-or-back-clean-for-extended-side-windowed.scad
View File

@ -1,18 +0,0 @@
/*
* SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
* SPDX-License-Identifier: GPL-3.0-or-later
*/
include <parameters.scad>
include <components.scad>
use <frames/pieces/box/front-or-back-windowed.scad>
module windowed_front_or_back_box_frame_piece_for_extended_side() {
difference() {
windowed_front_or_back_box_frame_piece();
// ...minus the frame wall and lip on the left
translate([-frame_x/2+frame_wall/2, 0, 0]) cube([frame_wall, frame_y, frame_z], center=true);
}
}
windowed_front_or_back_box_frame_piece_for_extended_side();

18
src/frames/pieces/extended/front-or-back-clean-for-extended-side.scad
View File

@ -1,18 +0,0 @@
/*
* SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
* SPDX-License-Identifier: GPL-3.0-or-later
*/
include <parameters.scad>
include <components.scad>
use <frames/pieces/box/front-or-back.scad>
module front_or_back_box_frame_piece_for_extended_side() {
difference() {
front_or_back_box_frame_piece();
// ...minus the frame wall and lip on the left
translate([-frame_x/2+frame_wall/2, 0, 0]) cube([frame_wall, frame_y, frame_z], center=true);
}
}
front_or_back_box_frame_piece_for_extended_side();

6
src/frames/pieces/box/front-or-back-aux-and-neutrik.scad → src/frames/pieces/front-or-back-aux-and-neutrik.scad
View File

@ -7,9 +7,9 @@ include <parameters.scad>
include <components.scad>
use <front-or-back.scad>
module front_or_back_aux_and_neutrik_box_frame_piece() {
module front_or_back_aux_and_neutrik_frame_piece() {
difference() {
front_or_back_box_frame_piece();
front_or_back_frame_piece();
// aux button holes
translate([-35.25, -101.5, 0]) rotate([90, 0, 0]) aux_control_three_button_cluster();
@ -25,4 +25,4 @@ module front_or_back_aux_and_neutrik_box_frame_piece() {
}
}
front_or_back_aux_and_neutrik_box_frame_piece();
front_or_back_aux_and_neutrik_frame_piece();

2
src/frames/pieces/box/front-or-back-inner-wall.scad → src/frames/pieces/front-or-back-inner-wall.scad
View File

@ -18,7 +18,7 @@ module mount_column_cutout() {
module front_or_back_inner_wall_frame_base_piece() {
difference() {
// Z is scaled so that some part of the original part inner wall is retained
scale([1, 1, inner_frame_z_decorative_scale]) front_or_back_box_frame_piece();
scale([1, 1, inner_frame_z_decorative_scale]) front_or_back_frame_piece();
// minus the outer wall
translate([0, -(frame_y-frame_wall)/2, 0]) cube([frame_x, frame_wall, frame_z], center=true);
// minus half of the mounting posts (the other half provided by the outer wall)

8
src/frames/pieces/extended/front-or-back.scad → src/frames/pieces/front-or-back-trapezoid.scad
View File

@ -5,11 +5,11 @@
include <parameters.scad>
include <components.scad>
use <front-or-back-clean-for-extended-side.scad>
use <front-or-back.scad>
module clean_front_or_back() {
difference() {
front_or_back_box_frame_piece_for_extended_side();
front_or_back_frame_piece();
// chop off the lip we left on the basic piece
translate([-frame_x/2+frame_wall/2, 0, 0]) cube([frame_wall, frame_y, frame_z], center=true);
};
@ -29,9 +29,9 @@ module bottom_piece_extension() {
}
}
module extended_front_or_back_frame_piece() {
module front_or_back_trapezoid_frame_piece() {
clean_front_or_back();
translate([0, -frame_y/2+frame_wall, 0]) rotate([90, 0, 0]) bottom_piece_extension();
}
extended_front_or_back_frame_piece();
front_or_back_trapezoid_frame_piece();

14
src/frames/pieces/box/front-or-back-windowed-backslashes.scad → src/frames/pieces/front-or-back-windowed-backslashes.scad
View File

@ -19,9 +19,9 @@ module backslashes() {
translate([70, -(frame_y-frame_wall)/2, 0]) slash_cutout();
}
module backslashes_windowed_front_or_back_box_frame_piece() {
module backslashes_windowed_front_or_back_frame_piece() {
difference() {
front_or_back_box_frame_piece();
front_or_back_frame_piece();
// subtract slashes from the frame wall
backslashes();
// subtract the inner wall area that will be provided by the other piece
@ -29,4 +29,12 @@ module backslashes_windowed_front_or_back_box_frame_piece() {
}
}
backslashes_windowed_front_or_back_box_frame_piece();
module backslashes_windowed_front_or_back_frame_piece_for_extended_side() {
difference() {
backslashes_windowed_front_or_back_frame_piece();
// ...minus the frame wall and lip on the left
translate([-frame_x/2+frame_wall/2, 0, 0]) cube([frame_wall, frame_y, frame_z], center=true);
}
}
backslashes_windowed_front_or_back_frame_piece_for_extended_side();

14
src/frames/pieces/box/front-or-back-windowed-forwardslashes.scad → src/frames/pieces/front-or-back-windowed-forwardslashes.scad
View File

@ -9,9 +9,9 @@ use <front-or-back.scad>
use <front-or-back-inner-wall.scad>
use <front-or-back-windowed-backslashes.scad>
module forwardslashes_windowed_front_or_back_box_frame_piece() {
module forwardslashes_windowed_front_or_back_frame_piece() {
difference() {
front_or_back_box_frame_piece();
front_or_back_frame_piece();
// subtract slashes from the frame wall
mirror([0, 0, 1]) backslashes();
// subtract the inner wall area that will be provided by the other piece
@ -19,4 +19,12 @@ module forwardslashes_windowed_front_or_back_box_frame_piece() {
}
}
forwardslashes_windowed_front_or_back_box_frame_piece();
module forwardslashes_windowed_front_or_back_frame_piece_for_extended_side() {
difference() {
forwardslashes_windowed_front_or_back_frame_piece();
// ...minus the frame wall and lip on the left
translate([-frame_x/2+frame_wall/2, 0, 0]) cube([frame_wall, frame_y, frame_z], center=true);
}
}
forwardslashes_windowed_front_or_back_frame_piece_for_extended_side();

14
src/frames/pieces/box/front-or-back-windowed-horiz-stripes.scad → src/frames/pieces/front-or-back-windowed-horiz-stripes.scad
View File

@ -12,9 +12,9 @@ module front_stripe() {
cube([frame_x-(frame_mount_column_width*1.75)*2, frame_wall, 5], center=true);
}
module horiz_striped_windowed_front_or_back_box_frame_piece() {
module horiz_striped_windowed_front_or_back_frame_piece() {
difference() {
front_or_back_box_frame_piece();
front_or_back_frame_piece();
// subtract frame wall windows
translate([0, -(frame_y-frame_wall)/2, 18]) front_stripe();
translate([0, -(frame_y-frame_wall)/2, 9]) front_stripe();
@ -26,4 +26,12 @@ module horiz_striped_windowed_front_or_back_box_frame_piece() {
}
}
horiz_striped_windowed_front_or_back_box_frame_piece();
module horiz_striped_windowed_front_or_back_frame_piece_for_extended_side() {
difference() {
horiz_striped_windowed_front_or_back_frame_piece();
// ...minus the frame wall and lip on the left
translate([-frame_x/2+frame_wall/2, 0, 0]) cube([frame_wall, frame_y, frame_z], center=true);
}
}
horiz_striped_windowed_front_or_back_frame_piece_for_extended_side();

14
src/frames/pieces/box/front-or-back-windowed.scad → src/frames/pieces/front-or-back-windowed.scad
View File

@ -14,9 +14,9 @@ module front_or_back_window() {
frame_z-panel_z*3], center=true);
}
module windowed_front_or_back_box_frame_piece() {
module windowed_front_or_back_frame_piece() {
difference() {
front_or_back_box_frame_piece();
front_or_back_frame_piece();
// subtract frame wall window
front_or_back_window();
// subtract the inner wall area that will be provided by the other piece
@ -24,4 +24,12 @@ module windowed_front_or_back_box_frame_piece() {
}
}
windowed_front_or_back_box_frame_piece();
module windowed_front_or_back_frame_piece_for_extended_side() {
difference() {
windowed_front_or_back_frame_piece();
// ...minus the frame wall and lip on the left
translate([-frame_x/2+frame_wall/2, 0, 0]) cube([frame_wall, frame_y, frame_z], center=true);
}
}
windowed_front_or_back_frame_piece_for_extended_side();

11
src/frames/pieces/box/front-or-back.scad → src/frames/pieces/front-or-back.scad
View File

@ -6,8 +6,9 @@
include <parameters.scad>
include <components.scad>
use <frames/complete/left-frame.scad>
use <side.scad>
module front_or_back_box_frame_piece() {
module front_or_back_frame_piece() {
piece_width = panel_support_width+frame_wall+frame_mount_column_width;
intersection() {
left_frame();
@ -16,15 +17,11 @@ module front_or_back_box_frame_piece() {
translate([0, -(frame_y/2)+(piece_width/2), 0]) cube([frame_x, piece_width, frame_z], center=true);
// ...minus the frame wall and lip on the left
translate([-frame_x/2+frame_wall/2, 0, 0])
cube([frame_wall, frame_y-frame_wall*2, frame_z], center=true);
linear_extrude(height=frame_z, center=true) polygon([
[-frame_x/2, -frame_y/2], [-frame_x/2+frame_wall, -frame_y/2+frame_wall],
[-frame_x/2, -frame_y/2+frame_wall]
]);
cube([frame_wall, frame_y, frame_z], center=true);
// ...minus a slot for the combining piece to go into
cube([frame_x, frame_y-(panel_support_width+frame_wall)*2, inner_frame_z/3], center=true);
}
}
}
front_or_back_box_frame_piece();
front_or_back_frame_piece();

4
src/frames/pieces/interconnect.scad
View File

@ -5,11 +5,11 @@
include <parameters.scad>
include <components.scad>
use <box/side.scad>
use <side.scad>
module interconnect_frame_half_piece() {
translate([frame_x/2-frame_wall, 0, 0]) difference() {
side_box_frame_piece();
side_frame_piece();
rotate([0, 0, 180]) side_chopper();
}
}

2
src/frames/pieces/box/side-inner-wall.scad → src/frames/pieces/side-inner-wall.scad
View File

@ -18,7 +18,7 @@ module mount_column_cutout() {
module side_inner_wall_frame_base_piece() {
difference() {
// Z is scaled so that some part of the original part inner wall is retained
scale([1, 1, inner_frame_z_decorative_scale]) side_box_frame_piece();
scale([1, 1, inner_frame_z_decorative_scale]) side_frame_piece();
// minus the outer wall
translate([-(frame_x-frame_wall)/2, 0, 0]) cube([frame_wall, frame_y, frame_z], center=true);
// minus half of the mounting posts (the other half provided by the outer wall)

9
src/frames/pieces/extended/side-short.scad → src/frames/pieces/side-longish.scad
View File

@ -6,8 +6,7 @@
include <parameters.scad>
include <components.scad>
use <frames/complete/left-frame.scad>
use <frames/pieces/box/side.scad>
use <front-or-back-clean-for-extended-side.scad>
use <side.scad>
module side_frame_piece_wall() {
// get a slice of the piece, to use it in extruding
@ -27,13 +26,13 @@ module side_frame_piece_extension() {
}
}
module extended_left_or_right_frame_piece() {
module side_longish_frame_piece() {
difference() {
side_box_frame_piece();
side_frame_piece();
// chop off the old edge which is getting replaced with the extension
translate([-frame_x/2+frame_bevel_height/2, 0, 0]) cube([frame_bevel_height, frame_y, frame_z], center=true);
}
translate([-frame_x/2+frame_bevel_height*2, 0, 0]) rotate([0, -90, 0]) side_frame_piece_extension();
}
extended_left_or_right_frame_piece();
side_longish_frame_piece();

10
src/frames/pieces/extended/side-extended-to-front.scad → src/frames/pieces/side-trapezoid-extended-to-front-trapezoid.scad
View File

@ -6,8 +6,8 @@
include <parameters.scad>
include <components.scad>
use <frames/complete/left-frame.scad>
use <frames/pieces/box/side.scad>
use <front-or-back.scad>
use <side.scad>
use <front-or-back-trapezoid.scad>
module side_and_bottom_frame_piece_wall() {
// get a slice of the pieces, to use it in extruding
@ -26,13 +26,13 @@ module side_and_bottom_frame_piece_extension() {
}
}
module extra_extended_left_or_right_frame_piece() {
module side_trapezoid_extended_to_front_frame_piece() {
difference() {
side_box_frame_piece();
side_frame_piece();
// chop off the old edge which is getting replaced with the extension
translate([-frame_x/2+frame_bevel_height/2, 0, 0]) cube([frame_bevel_height, frame_y, frame_z], center=true);
}
translate([-frame_x/2+frame_bevel_height*2, 0, 0]) rotate([0, -90, 0]) side_and_bottom_frame_piece_extension();
}
extra_extended_left_or_right_frame_piece();
side_trapezoid_extended_to_front_frame_piece();

9
src/frames/pieces/extended/side.scad → src/frames/pieces/side-trapezoid.scad
View File

@ -6,8 +6,7 @@
include <parameters.scad>
include <components.scad>
use <frames/complete/left-frame.scad>
use <frames/pieces/box/side.scad>
use <front-or-back-clean-for-extended-side.scad>
use <side.scad>
module side_frame_piece_wall() {
// get a slice of the piece, to use it in extruding
@ -25,13 +24,13 @@ module side_frame_piece_extension() {
}
}
module extended_left_or_right_frame_piece() {
module side_trapezoid_frame_piece() {
difference() {
side_box_frame_piece();
side_frame_piece();
// chop off the old edge which is getting replaced with the extension
translate([-frame_x/2+frame_bevel_height/2, 0, 0]) cube([frame_bevel_height, frame_y, frame_z], center=true);
}
translate([-frame_x/2+frame_bevel_height*2, 0, 0]) rotate([0, -90, 0]) side_frame_piece_extension();
}
extended_left_or_right_frame_piece();
side_trapezoid_frame_piece();

6
src/frames/pieces/box/side-windowed-backslashes.scad → src/frames/pieces/side-windowed-backslashes.scad
View File

@ -17,9 +17,9 @@ module backslashes() {
translate([-(frame_x-frame_wall)/2, 50, 0]) rotate([0, 0, -90]) slash_cutout();
}
module backslashes_windowed_side_box_frame_piece() {
module backslashes_windowed_side_frame_piece() {
difference() {
side_box_frame_piece();
side_frame_piece();
// subtract slashes from the frame wall
backslashes();
// subtract the inner wall area that will be provided by the other piece
@ -27,4 +27,4 @@ module backslashes_windowed_side_box_frame_piece() {
}
}
backslashes_windowed_side_box_frame_piece();
backslashes_windowed_side_frame_piece();

6
src/frames/pieces/box/side-windowed-forwardslashes.scad → src/frames/pieces/side-windowed-forwardslashes.scad
View File

@ -9,9 +9,9 @@ use <side.scad>
use <side-inner-wall.scad>
use <side-windowed-backslashes.scad>
module forwardslashes_windowed_side_box_frame_piece() {
module forwardslashes_windowed_side_frame_piece() {
difference() {
side_box_frame_piece();
side_frame_piece();
// subtract slashes from the frame wall
mirror([0, 0, 1]) backslashes();
// subtract the inner wall area that will be provided by the other piece
@ -19,4 +19,4 @@ module forwardslashes_windowed_side_box_frame_piece() {
}
}
forwardslashes_windowed_side_box_frame_piece();
forwardslashes_windowed_side_frame_piece();

6
src/frames/pieces/box/side-windowed-horiz-stripes.scad → src/frames/pieces/side-windowed-horiz-stripes.scad
View File

@ -12,9 +12,9 @@ module side_stripe() {
cube([frame_wall, frame_y-(frame_mount_column_width*1.75)*2, 5], center=true);
}
module horiz_striped_windowed_side_box_frame_piece() {
module horiz_striped_windowed_side_frame_piece() {
difference() {
side_box_frame_piece();
side_frame_piece();
// subtract frame wall windows
translate([-(frame_x-frame_wall)/2, 0, 18]) side_stripe();
translate([-(frame_x-frame_wall)/2, 0, 9]) side_stripe();
@ -26,4 +26,4 @@ module horiz_striped_windowed_side_box_frame_piece() {
}
}
horiz_striped_windowed_side_box_frame_piece();
horiz_striped_windowed_side_frame_piece();

6
src/frames/pieces/box/side-windowed.scad → src/frames/pieces/side-windowed.scad
View File

@ -8,9 +8,9 @@ include <components.scad>
use <side.scad>
use <side-inner-wall.scad>
module windowed_side_box_frame_piece() {
module windowed_side_frame_piece() {
difference() {
side_box_frame_piece();
side_frame_piece();
// subtract frame wall window
translate([-frame_x/2, 0, 0])
cube([(frame_wall+panel_support_width)*2, frame_y-frame_mount_column_width*3.5,
@ -20,4 +20,4 @@ module windowed_side_box_frame_piece() {
}
}
windowed_side_box_frame_piece();
windowed_side_frame_piece();

8
src/frames/pieces/box/side.scad → src/frames/pieces/side.scad
View File

@ -7,17 +7,17 @@ include <parameters.scad>
include <components.scad>
use <front-or-back.scad>
module side_box_frame_piece() {
module side_frame_piece() {
piece_width = panel_support_width+frame_wall+frame_mount_column_width;
difference() {
// side piece is left/right agnostic
frame();
// minus the top and bottom
front_or_back_box_frame_piece();
rotate([180, 0, 0]) front_or_back_box_frame_piece();
front_or_back_frame_piece();
rotate([180, 0, 0]) front_or_back_frame_piece();
// and just chop out the rest of the frame
translate([piece_width, 0, 0]) cube([frame_x, frame_y+1, frame_z+1], center=true);
}
}
side_box_frame_piece();
side_frame_piece();