use the larger concaveness from the overhang panel

rename bottom panels now that concave is normal

src/bottom-panel-solo.scad

@@ -17,13 +17,12 @@
  */
 
 include <components.scad>
-use <bottom-panel.scad>
 
-module bottom_panel_concave() {
+module bottom_panel_solo() {
 	difference() {
-		bottom_panel();
+		bottom_plate_with_overhang();
-		translate([0, 0, top_plate_z/2]) cube([top_plate_x*2/3, top_plate_y*2/3, top_plate_z], center=true);
+		translate([0, 0, top_plate_z/2]) cube([top_plate_x*5/6, top_plate_y*5/6, top_plate_z], center=true);
 	}
 }
 
-bottom_panel_concave();
+bottom_panel_solo();

src/bottom-panel.scad

@@ -19,7 +19,10 @@
 include <components.scad>
 
 module bottom_panel() {
-	mirror([0, 0, 1]) topplate();
+	difference() {
+		mirror([0, 0, 1]) topplate();
+		translate([0, 0, top_plate_z/2]) cube([top_plate_x*5/6, top_plate_y*5/6, top_plate_z], center=true);
+	}
 }
 
 bottom_panel();

src/components.scad

@@ -181,6 +181,10 @@ module base_topplate() {
 	cube([top_plate_x, top_plate_y, top_plate_z], center=true);
 }
 
+module overhang_plate() {
+	roundedcube([top_plate_x+25, top_plate_y+25, top_plate_z], center=true, radius=1);
+}
+
 // this takes the base_topplate and makes it a small frame, putting a larger top plate
 module base_topplate_with_raised_overhang() {
 	// make a frame out of the top plate (and keep the main plate on the center plane)
@@ -192,9 +196,7 @@ module base_topplate_with_raised_overhang() {
 	translate([-((top_plate_x/2)-10), (top_plate_y/2)-10, -2.5]) resize([0, 0, 10]) frame_mount_column();
 	translate([(top_plate_x/2)-10, -((top_plate_y/2)-10), -2.5]) resize([0, 0, 10]) frame_mount_column();
 	translate([-((top_plate_x/2)-10), -((top_plate_y/2)-10), -2.5]) resize([0, 0, 10]) frame_mount_column();
-
+	overhang_plate();
-	// larger top plate
-	roundedcube([top_plate_x+25, top_plate_y+25, top_plate_z], center=true, radius=1);
 }
 
 module topplate() {
@@ -204,6 +206,13 @@ module topplate() {
 	}
 }
 
+module bottom_plate_with_overhang() {
+	difference() {
+		overhang_plate();
+		rotate([180, 0, 0]) top_plate_holes();
+	}
+}
+
 module topplate_with_raised_overhang() {
 	difference() {
 		base_topplate_with_raised_overhang();
@@ -222,8 +231,8 @@ module frame_mount_column() {
 	cube([20, 20, frame_z], center=true);
 }
 
-module frame_side_chopper() {
+module side_chopper() {
-	translate([frame_x/2, 0, 0]) cube([8, 2*(frame_y+top_plate_y), 2*(frame_z+top_plate_z)], center=true);
+	translate([frame_x/2+4, 0, 0]) cube([16, 2*(frame_y+top_plate_y), 2*(frame_z+top_plate_z)], center=true);
 }
 
 module frame_connection_holes() {

src/frame-left.scad

@@ -22,7 +22,7 @@ module base_left_frame() {
 	difference() {
 		frame();
 		// chop the right edge off
-		frame_side_chopper();
+		side_chopper();
 	}
 }
 

src/frame-middle.scad

@@ -22,8 +22,8 @@ module base_middle_frame() {
 	difference() {
 		frame();
 		// chop the left and right edge off
-		frame_side_chopper();
+		side_chopper();
-		mirror([1, 0, 0]) frame_side_chopper();
+		mirror([1, 0, 0]) side_chopper();
 	}
 }
 

src/frame-solo.scad

@@ -24,8 +24,8 @@ module solo_frame() {
 
 		// neutrik mounts for connector, switches
 		translate([0, (frame_x/2)-2.5, 0]) rotate([90, 0, 0]) neutrik_d_mount();
-		translate([-40, (frame_x/2)-2.5, 0]) rotate([270, 0, 0]) button_24mm_hole_for_snapins();
+		translate([-40, (frame_x/2)-2.5, 0]) rotate([90, 0, 0]) neutrik_d_mount();
-		translate([40, (frame_x/2)-2.5, 0]) rotate([270, 0, 0]) button_24mm_hole_for_snapins();
+		translate([40, (frame_x/2)-2.5, 0]) rotate([90, 0, 0]) neutrik_d_mount();
 
 		// aux button holes
 		translate([-frame_y/2+2.5, 0, 0]) rotate([0, 0, 270])