README.md

@@ -135,16 +135,6 @@ Board, ~$60 for Sanwa buttons and a lever, and ~$20 for miscellaneous connectors
 full-featured controller with an open source foundation together for around $140. Reducing wall and infill settings
 will probably save you around $5 of material, and you can probably decide what you want to do from there.
 
-## FAQ
-
-### I get a bunch of warnings on not being able to include files when I open them in OpenSCAD, what do I do?
-
-OpenSCAD pathing is relative to the current working directory by default, which is probably not the `src/` directory.
-When you start OpenSCAD, you must either start it from inside the project's `src/` directory, or point it at the path to
-the source files via e.g. `OPENSCADPATH=path/to/buildable-stick-system/src/` openscad`.
-
-See https://en.wikibooks.org/wiki/OpenSCAD_User_Manual/Include_Statement.
-
 ## Miscellany
 
 See the `/docs/` directory for more thoughts too scattered for this document.

demo/all-together-demo-extended-with-windows.scad

@@ -9,7 +9,7 @@ use <frames/pieces/side-trapezoid.scad>
 use <frames/pieces/front-or-back-aux-and-neutrik.scad>
 use <frames/pieces/front-or-back-windowed-horiz-stripes.scad>
 use <panels/inset/lever-and-dir_arc-plus-w-30mm-panel.scad>
-use <panels/inset/sega-2p-nine-plus-aux-button-with-mount.scad>
+use <panels/inset/sega-2p-nine-plus-control-panel-with-mount.scad>
 use <misc/decorative-plate-24mm-button.scad>
 use <misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-nine.scad>
 use <misc/dustwasher-lsx-nobi.scad>
@@ -21,7 +21,7 @@ frame_side_color       = "#8E9089";
 top_deco_color         = "#8E9089";
 
 color(top_panel_color) translate([-panel_x/2, 0, frame_z/2-panel_z+0.01]) lever_and_dir_arc_w_30mm_panel();
-color(top_panel_color) translate([panel_x/2, 0, frame_z/2-panel_z+0.01]) sega_2p_nine_plus_aux_button_with_mount();
+color(top_panel_color) translate([panel_x/2, 0, frame_z/2-panel_z+0.01]) sega_2p_nine_plus_control_panel_with_mount();
 color(frame_side_color) translate([-frame_x/2+4, 0, -2.5]) side_trapezoid_frame_piece();
 color(frame_side_color) translate([frame_x/2-4, 0, -2.5]) mirror([1, 0, 0]) side_trapezoid_frame_piece();
 color(frame_top_bottom_color) translate([-frame_x/2+4, 0, -2.5])  horiz_striped_windowed_front_or_back_frame_piece();

demo/all-together-demo-extended.scad

@@ -5,24 +5,24 @@
 
 include <parameters.scad>
 include <components.scad>
-use <frames/pieces/front-or-back-aux-and-neutrik.scad>
 use <frames/pieces/front-or-back-trapezoid.scad>
 use <frames/pieces/side-trapezoid-extended-to-front-trapezoid.scad>
-use <panels/inset/lever-and-dir_arc-plus-w-30mm-panel-with-oled.scad>
-use <panels/inset/sega-2p-nine-plus-aux-button-with-mount.scad>
+use <frames/pieces/front-or-back-aux-and-neutrik.scad>
+use <panels/inset/lever-and-dir_arc-plus-w-30mm-panel.scad>
+use <panels/inset/sega-2p-nine-plus-control-panel-with-mount.scad>
 use <misc/decorative-plate-24mm-button.scad>
 use <misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-nine.scad>
 use <misc/dustwasher-lsx-nobi.scad>
 
-top_panel_color        = "#0086D6";
-bottom_panel_color     = "white";
-frame_front_color      = "white";
-frame_back_color       = "white";
-frame_side_color       = "yellow";
+top_panel_color        = "purple";
+bottom_panel_color     = "black";
+frame_front_color      = "black";
+frame_back_color       = "black";
+frame_side_color       = "red";
 top_deco_color         = "white";
 
-color(top_panel_color) translate([-panel_x/2, 0, frame_z/2-panel_z+0.01]) lever_and_dir_arc_w_30mm_panel_with_oled();
-color(top_panel_color) translate([panel_x/2, 0, frame_z/2-panel_z+0.01]) sega_2p_nine_plus_aux_button_with_mount();
+color(top_panel_color) translate([-panel_x/2, 0, frame_z/2-panel_z+0.01]) lever_and_dir_arc_w_30mm_panel();
+color(top_panel_color) translate([panel_x/2, 0, frame_z/2-panel_z+0.01]) sega_2p_nine_plus_control_panel_with_mount();
 color(frame_side_color) translate([-frame_x/2+4, 0, -2.5]) side_trapezoid_extended_to_front_frame_piece();
 color(frame_side_color) translate([frame_x/2-4, 0, -2.5]) mirror([1, 0, 0]) side_trapezoid_extended_to_front_frame_piece();
 color(frame_front_color) translate([-frame_x/2+4, 0, -2.5])  front_or_back_trapezoid_frame_piece();
@@ -33,5 +33,5 @@ color(bottom_panel_color) translate([-panel_x/2, 0, -5-frame_z/2+5]) panel();
 color(bottom_panel_color) translate([panel_x/2, 0, -5-frame_z/2+5]) panel();
 
 color(top_deco_color) translate([0, 0, 3+frame_z/2-panel_z]) dir_arc_plus_w_30mm_and_sega_2p_nine_decorative_plate();
-color(top_deco_color) translate([-170, 20, 3+frame_z/2-panel_z]) rotate([180, 0, 0]) lsx_nobi_dustwasher();
+color(top_deco_color) translate([-170, 20, 3+frame_z/2-panel_z]) lsx_nobi_dustwasher();
 color(top_deco_color) translate([panel_x-24, 30, 3+frame_z/2-panel_z]) button_24mm_decorative_plate();

demo/all-together-demo.scad

@@ -9,10 +9,11 @@ use <frames/pieces/side.scad>
 use <frames/pieces/front-or-back.scad>
 use <frames/pieces/front-or-back-aux-and-neutrik.scad>
 use <panels/inset/lever-and-dir_arc-plus-w-30mm-panel.scad>
-use <panels/inset/sega-2p-nine-plus-aux-button-with-mount.scad>
+use <panels/inset/sega-2p-nine-plus-control-panel-with-mount.scad>
 use <misc/decorative-plate-24mm-button.scad>
 use <misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-nine.scad>
 use <misc/dustwasher-lsx-nobi.scad>
+use <misc/decorative-corner.scad>
 
 panel_color    = "red";
 base_color     = "gray";
@@ -20,7 +21,7 @@ top_deco_color = "white";
 brace_color    = "gray";
 
 color(panel_color) translate([-panel_x/2, 0, frame_z/2-panel_z/2+0.001]) lever_and_dir_arc_w_30mm_panel();
-color(panel_color) translate([panel_x/2, 0, frame_z/2-panel_z/2+0.001]) sega_2p_nine_plus_aux_button_with_mount();
+color(panel_color) translate([panel_x/2, 0, frame_z/2-panel_z/2+0.001]) sega_2p_nine_plus_control_panel_with_mount();
 color(base_color) translate([panel_x/2, 0, 0]) rotate([0, 180, 0]) side_frame_piece();
 color(base_color) translate([-panel_x/2, 0, 0]) side_frame_piece();
 color(base_color) translate([panel_x/2, 0, 0]) front_or_back_frame_piece();
@@ -30,6 +31,11 @@ color(base_color) translate([-panel_x/2, 0, 0]) rotate([180, 0, 0]) front_or_bac
 color(base_color) translate([-panel_x/2, 0, -frame_z/2+panel_z/2]) panel();
 color(base_color) translate([panel_x/2, 0, -frame_z/2+panel_z/2]) panel();
 
+color(brace_color) translate([-panel_x/2, 0, 0]) decorative_corner();
+color(brace_color) mirror([1, 0, 0]) translate([-panel_x/2, 0, 0]) decorative_corner();
+color(brace_color) mirror([0, 1, 0]) translate([-panel_x/2, 0, 0]) decorative_corner();
+color(brace_color) mirror([1, 0, 0]) mirror([0, 1, 0]) translate([-panel_x/2, 0, 0]) decorative_corner();
+
 color(top_deco_color) translate([0, 0, 4+frame_z/2-panel_z/2+0.001]) dir_arc_plus_w_30mm_and_sega_2p_nine_decorative_plate();
 color(top_deco_color) translate([-170, 20, 4+frame_z/2-panel_z/2+0.001]) lsx_nobi_dustwasher();
 color(top_deco_color) translate([panel_x-24, 30, 4+frame_z/2-panel_z/2+0.001]) button_24mm_decorative_plate();

demo/blown-up-demo.scad

@@ -10,14 +10,14 @@ use <frames/pieces/side.scad>
 use <frames/pieces/front-or-back.scad>
 use <frames/pieces/front-or-back-aux-and-neutrik.scad>
 use <panels/overhang/left-lever-and-dir_arc-plus-w-30mm-panel.scad>
-use <panels/overhang/right-sega-2p-nine-plus-aux-button-with-mount.scad>
+use <panels/overhang/right-sega-2p-nine-plus-control-panel-with-mount.scad>
 use <panels/overhang/left-or-right-panel.scad>
 use <misc/decorative-plate-24mm-button.scad>
 use <misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-nine.scad>
 use <misc/dustwasher-lsx-nobi.scad>
 
 color("#C12E1F") translate([-panel_x/2-25, 0, frame_z/2+75]) lever_and_dir_arc_w_30mm_left_overhang_panel();
-color("#C12E1F") translate([panel_x/2+25, 0, frame_z/2+75]) sega_2p_nine_plus_aux_button_right_overhang_panel_with_mount();
+color("#C12E1F") translate([panel_x/2+25, 0, frame_z/2+75]) sega_2p_nine_plus_control_right_overhang_panel_with_mount();
 color("black") translate([-frame_x/2+5-25, -55, -2.5]) front_or_back_frame_piece();
 color("black") rotate([0, 180, 0]) translate([-frame_x/2+5-25, -55, -2.5]) front_or_back_frame_piece();
 color("black") translate([-frame_x/2+5-50, 0, -2.5]) side_frame_piece();

src/misc/m4-hex-spacer-sleeve.scad

@@ -1,24 +0,0 @@
-/* Wrap a smaller width hex spacer with plastic to get it to fit in our standard post hole.
- *
- * Since the hex spacers can vary in width, you may have to adjust the inner dimensions
- * to make this work right for your piece, but this worked right for mine. YMMV.
- *
- * SPDX-FileCopyrightText: © 2025 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-include <parameters.scad>
-include <components.scad>
-
-module small_m4_hole() {
-	scale([1, 1, 2]) cylinder(r=3.25, h=frame_z, $fn=6, center=true);
-}
-
-module m4_hex_spacer_sleeve() {
-	difference() {
-		resize([0, 0, 45]) frame_hex_bolt_hole();
-		small_m4_hole();
-	}
-}
-
-
-m4_hex_spacer_sleeve();

src/panels/inset/lever-and-dir_arc-plus-w-30mm-panel-with-oled.scad

@@ -8,6 +8,17 @@ include <components.scad>
 use <lever-and-dir_arc-plus-w-30mm-panel.scad>
 
 module lever_and_dir_arc_w_30mm_panel_with_oled() {
+	/* // TEMP FOR PRINTING JUST THE SECTION AS A TEST */
+	/* intersection() { */
+	/* 	union() { */
+	/* 		difference() { */
+	/* 			lever_and_dir_arc_w_30mm_panel(); */
+	/* 			translate([0, -(panel_y/2 - 30), 0]) adafruit_pid_326_oled_ssd1306_mount_cutout(); */
+	/* 		} */
+	/* 		translate([0, -(panel_y/2 - 30), 0]) adafruit_pid_326_oled_ssd1306_mount(); */
+	/* 	} */
+	/* 	translate([0, -(panel_y/2-30), 0]) cube([50, 40, 10], center=true); */
+	/* } */
 	difference() {
 		lever_and_dir_arc_w_30mm_panel();
 		translate([0, -(panel_y/2 - 22), 0]) adafruit_pid_326_oled_ssd1306_mount_cutout();

src/panels/inset/sega-2p-nine-plus-control-panel-with-mount.scad

@@ -5,11 +5,11 @@
 
 include <parameters.scad>
 include <components.scad>
-use <sega-2p-nine-plus-aux-button.scad>
+use <sega-2p-nine-plus-control-panel.scad>
 
-module sega_2p_nine_plus_aux_button_with_mount() {
-	sega_2p_nine_plus_aux_button();
+module sega_2p_nine_plus_control_panel_with_mount() {
+	sega_2p_nine_plus_control_panel();
 	translate([30, -50, -(panel_z/2) - 3]) pcb_mount();
 }
 
-sega_2p_nine_plus_aux_button_with_mount();
+sega_2p_nine_plus_control_panel_with_mount();

src/panels/inset/sega-2p-nine-plus-control-panel.scad

@@ -6,7 +6,7 @@
 include <parameters.scad>
 include <components.scad>
 
-module sega_2p_nine_plus_aux_button() {
+module sega_2p_nine_plus_control_panel() {
 	difference() {
 		panel();
 		sega_2p_nine();
@@ -14,4 +14,4 @@ module sega_2p_nine_plus_aux_button() {
 	}
 }
 
-sega_2p_nine_plus_aux_button();
+sega_2p_nine_plus_control_panel();

src/panels/overhang/right-sega-2p-nine-plus-control-panel-with-mount.scad

@@ -5,11 +5,11 @@
 
 include <parameters.scad>
 include <components.scad>
-use <right-sega-2p-nine-plus-aux-button.scad>
+use <right-sega-2p-nine-plus-control-panel.scad>
 
-module sega_2p_nine_plus_aux_button_right_overhang_panel_with_mount() {
-	sega_2p_nine_plus_aux_button_right_overhang_panel();
+module sega_2p_nine_plus_control_right_overhang_panel_with_mount() {
+	sega_2p_nine_plus_control_right_overhang_panel();
 	translate([30, -50, -(panel_z/2) - 3]) pcb_mount();
 }
 
-sega_2p_nine_plus_aux_button_right_overhang_panel_with_mount();
+sega_2p_nine_plus_control_right_overhang_panel_with_mount();

src/panels/overhang/right-sega-2p-nine-plus-control-panel.scad

@@ -6,7 +6,7 @@
 include <parameters.scad>
 include <components.scad>
 
-module sega_2p_nine_plus_aux_button_right_overhang_panel() {
+module sega_2p_nine_plus_control_right_overhang_panel() {
 	difference() {
 		panel_with_raised_overhang();
 		sega_2p_nine();
@@ -15,4 +15,4 @@ module sega_2p_nine_plus_aux_button_right_overhang_panel() {
 	}
 }
 
-sega_2p_nine_plus_aux_button_right_overhang_panel();
+sega_2p_nine_plus_control_right_overhang_panel();