neutrik D base plate, also good as a cover

src/misc-dustwasher-lsx-nobi.scad

@@ -0,0 +1,28 @@
+/* Copyright Brian Stephan 2023
+ *
+ * This file is part of the Buildable Stick System.
+ *
+ * The Buildable Stick System is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 3 of the License, or (at your
+ * option) any later version.
+ *
+ * The Buildable Stick System is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+ */
+
+include <components.scad>
+
+module lsx_nobi_dustwasher() {
+	difference() {
+		cylinder(r=jumbo_decorative_radius+5+hole_tolerance, h=2, $fn=50, center=true);
+		cylinder(r=5+hole_tolerance, h=2.1, $fn=50, center=true);
+	}
+}
+
+lsx_nobi_dustwasher();

src/misc-neutrik-d-plate-20mm-hole.scad

@@ -17,12 +17,11 @@
  */
 
 include <components.scad>
+use <misc-neutrik-d-plate.scad>
 
 module neutrik_d_plate_20mm() {
 	difference() {
-		cube([30, 35, 2], center=true);
+		neutrik_d_plate();
-		translate([9.5, 12, 0]) neutrik_d_screw_hole();
-		translate([-9.5, -12, 0]) neutrik_d_screw_hole();
 		cylinder(r=10+hole_tolerance, h=5, $fn=50, center=true);
 		cube([2.2, 22, 5], center=true);
 	}

src/misc-neutrik-d-plate-24mm-hole.scad

@@ -17,12 +17,11 @@
  */
 
 include <components.scad>
+use <misc-neutrik-d-plate.scad>
 
 module neutrik_d_plate_24mm() {
 	difference() {
-		cube([30, 35, 2], center=true);
+		neutrik_d_plate();
-		translate([9.5, 12, 0]) neutrik_d_screw_hole();
-		translate([-9.5, -12, 0]) neutrik_d_screw_hole();
 		cylinder(r=12+hole_tolerance, h=5, $fn=50, center=true);
 	}
 }

src/misc-neutrik-d-plate.scad

@@ -0,0 +1,29 @@
+/* Copyright Brian Stephan 2023
+ *
+ * This file is part of the Buildable Stick System.
+ *
+ * The Buildable Stick System is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 3 of the License, or (at your
+ * option) any later version.
+ *
+ * The Buildable Stick System is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+ */
+
+include <components.scad>
+
+module neutrik_d_plate() {
+	difference() {
+		cube([30, 35, 2], center=true);
+		translate([9.5, 12, 0]) neutrik_d_screw_hole();
+		translate([-9.5, -12, 0]) neutrik_d_screw_hole();
+	}
+}
+
+neutrik_d_plate();