src/bottom-panel-inset.scad

@@ -7,7 +7,10 @@ include <parameters.scad>
 include <components.scad>
 
 module bottom_panel() {
-	mirror([0, 0, 1]) panel();
+	difference() {
+		mirror([0, 0, 1]) panel();
+		translate([0, 0, panel_z/2]) cube([panel_x-40, panel_y-40, panel_z], center=true);
+	}
 }
 
 bottom_panel();

src/components.scad

@@ -184,14 +184,10 @@ module base_panel_with_raised_overhang() {
 		base_panel();
 		cube([panel_x-(panel_support_width*2), panel_y-(panel_support_width*2), panel_z*2], center=true);
 	}
-	translate([panel_to_frame_point_x, panel_to_frame_point_y, -2.5]) resize([0, 0, 10])
+	translate([panel_to_frame_point_x, panel_to_frame_point_y, -2.5]) resize([0, 0, 10]) frame_mount_column();
-		frame_mount_column();
+	translate([-(panel_to_frame_point_x), panel_to_frame_point_y, -2.5]) resize([0, 0, 10]) frame_mount_column();
-	translate([-(panel_to_frame_point_x), panel_to_frame_point_y, -2.5]) resize([0, 0, 10])
+	translate([panel_to_frame_point_x, -(panel_to_frame_point_y), -2.5]) resize([0, 0, 10]) frame_mount_column();
-		rotate([0, 0, 90]) frame_mount_column();
+	translate([-(panel_to_frame_point_x), -(panel_to_frame_point_y), -2.5]) resize([0, 0, 10]) frame_mount_column();
-	translate([panel_to_frame_point_x, -(panel_to_frame_point_y), -2.5]) resize([0, 0, 10])
-		rotate([0, 0, 270]) frame_mount_column();
-	translate([-(panel_to_frame_point_x), -(panel_to_frame_point_y), -2.5]) resize([0, 0, 10])
-		rotate([0, 0, 180]) frame_mount_column();
 	overhang_plate();
 }
 
@@ -212,9 +208,6 @@ module frame_box() {
 
 module frame_mount_column() {
 	cube([20, 20, frame_z], center=true);
-	// add some corners back to do a lame chamfer
-	linear_extrude(height=frame_z, center=true)
-		polygon([[10, 10], [-20, 10], [10, -20]]);
 }
 
 module side_chopper() {
@@ -241,9 +234,9 @@ module frame_cable_routing_hole() {
 module base_frame() {
 	frame_box();
 	translate([panel_to_frame_point_x, panel_to_frame_point_y, 0]) frame_mount_column();
-	translate([-panel_to_frame_point_x, panel_to_frame_point_y, 0]) rotate([0, 0, 90]) frame_mount_column();
+	translate([-panel_to_frame_point_x, panel_to_frame_point_y, 0]) frame_mount_column();
-	translate([-panel_to_frame_point_x, -(panel_to_frame_point_y), 0]) rotate([0, 0, 180])  frame_mount_column();
+	translate([panel_to_frame_point_x, -(panel_to_frame_point_y), 0]) frame_mount_column();
-	translate([panel_to_frame_point_x, -(panel_to_frame_point_y), 0]) rotate([0, 0, 270])  frame_mount_column();
+	translate([-panel_to_frame_point_x, -(panel_to_frame_point_y), 0]) frame_mount_column();
 }
 
 module frame() {

src/parameters.scad

@@ -35,7 +35,7 @@ lever_plate_hole = 12;
 // base frame box. reminder: top of inside (including mounts) is chopped by panel_z for plates
 frame_x = 233;
 frame_y = 208;
-frame_z = 57;
+frame_z = 55;
 
 frame_center_to_neutrik = 70;