src/components.scad

@@ -80,20 +80,24 @@ module top_plate_holes() {
 	translate([-77.5, -90, 2]) m4_hole_countersink();
 }
 
-// button hole, with extra wide bits for various uses (cutting out space
-// for snap-ins, etc.
 module button_24mm_hole() {
 	cylinder(r=small_button_radius, h=100, $fn=50, center=true);
+}
+
+module button_24mm_hole_for_snapins() {
+	button_24mm_hole();
 	// carve out space for snap-ins, leave 3mm
 	// slagcoin has screw-in nut diameter at 29.5mm, so radius+6 to leave some space
 	// translation is to leave 3mm thickness in the plate without recentering anything
 	translate([0, 0, -25]) cylinder(r=small_button_radius+6, h=49, $fn=50, center=true);
 }
 
-// button hole, with extra wide bits for various uses (cutting out space
-// for snap-ins, etc.
 module button_30mm_hole() {
 	cylinder(r=big_button_radius, h=100, $fn=50, center=true);
+}
+
+module button_30mm_hole_for_snapins() {
+	button_30mm_hole();
 	// carve out space for snap-ins, leave 3mm
 	// slagcoin has screw-in nut diameter at 36mm, so radius+6 to leave some space
 	// translation is to leave 3mm thickness in the plate without recentering anything
@@ -279,31 +283,31 @@ module frame() {
 // Directional Arc (both hands)
 
 module dir_arc_24mm_6_button() {
-	button_24mm_hole();
-	translate([29.5, 0, 0]) button_24mm_hole();
-	translate([29.5+26.3, -12.9, 0]) button_24mm_hole();
+	button_24mm_hole_for_snapins();
+	translate([29.5, 0, 0]) button_24mm_hole_for_snapins();
+	translate([29.5+26.3, -12.9, 0]) button_24mm_hole_for_snapins();
 
-	translate([29.5+26.3+15.5+9.7+2.6, 0, 0]) button_24mm_hole();
-	translate([29.5+26.3+15.5+9.7+2.6+26.9, 10.9, 0]) button_24mm_hole();
-	translate([29.5+26.3+15.5+9.7+2.6+26.9+29.6, 10.9, 0]) button_24mm_hole();
-	translate([29.5+26.3+15.5+9.7, -29.4, 0]) button_24mm_hole();
-	translate([29.5+26.3+15.5+9.7+2.6+26.9-1.7, 10.9-30.1, 0]) button_24mm_hole();
-	translate([29.5+26.3+15.5+9.7+2.6+26.9+29.6, 10.9-30.1, 0]) button_24mm_hole();
+	translate([29.5+26.3+15.5+9.7+2.6, 0, 0]) button_24mm_hole_for_snapins();
+	translate([29.5+26.3+15.5+9.7+2.6+26.9, 10.9, 0]) button_24mm_hole_for_snapins();
+	translate([29.5+26.3+15.5+9.7+2.6+26.9+29.6, 10.9, 0]) button_24mm_hole_for_snapins();
+	translate([29.5+26.3+15.5+9.7, -29.4, 0]) button_24mm_hole_for_snapins();
+	translate([29.5+26.3+15.5+9.7+2.6+26.9-1.7, 10.9-30.1, 0]) button_24mm_hole_for_snapins();
+	translate([29.5+26.3+15.5+9.7+2.6+26.9+29.6, 10.9-30.1, 0]) button_24mm_hole_for_snapins();
 
-	translate([29.5+26.3+15.5, -65.2, 0]) button_30mm_hole();
+	translate([29.5+26.3+15.5, -65.2, 0]) button_30mm_hole_for_snapins();
 }
 
 // 6 button plus the normal fourth column for 8 button actually on a third row
 module dir_arc_24mm_8_button_compressed() {
 	dir_arc_24mm_6_button();
-	translate([29.5+26.3+15.5+9.7+2.6+2.6, 29.4, 0]) button_24mm_hole();
-	translate([29.5+26.3+15.5+9.7+2.6+26.9+2.6, 40.3, 0]) button_24mm_hole();
+	translate([29.5+26.3+15.5+9.7+2.6+2.6, 29.4, 0]) button_24mm_hole_for_snapins();
+	translate([29.5+26.3+15.5+9.7+2.6+26.9+2.6, 40.3, 0]) button_24mm_hole_for_snapins();
 }
 
 // Directional Arc (left hand)
 
 module dir_arc_30mm_button_l() {
-	translate([-top_plate_x/2, -top_plate_y/2, 0]) translate([73, 132, 0]) button_30mm_hole();
+	translate([68, 132, 0]) button_30mm_hole_for_snapins();
 }
 
 module dir_arc_w_30mm() {
@@ -312,7 +316,7 @@ module dir_arc_w_30mm() {
 	translate([35+33.5, -12.9, 0]) dir_arc_30mm_button_l();
 	translate([35+7, 34.5, 0]) dir_arc_30mm_button_l();
 	// just my guesstimate on this one, but note that this is the same position as sega 2p (just mirrored)
-	translate([-top_plate_x/2, -top_plate_y/2, 0]) translate([top_plate_x-28.06, 145-19-9-11-19-9-11, 0]) button_30mm_hole();
+	translate([top_plate_x-33.06, 145-19-9-11-19-9-11, 0]) button_30mm_hole_for_snapins();
 }
 
 module dir_arc_w_30mm_plus_one() {
@@ -323,7 +327,7 @@ module dir_arc_w_30mm_plus_one() {
 // Namco Noir (right hand)
 
 module noir_button_p1() {
-	translate([-top_plate_x/2, -top_plate_y/2, 0]) translate([35, 145, 0]) button_30mm_hole();
+	translate([40, 145, 0]) button_30mm_hole_for_snapins();
 }
 
 module noir_plus_one() {
@@ -344,7 +348,7 @@ module noir_plus_one() {
 // Sega Astro City 2P (right hand)
 
 module sega_2p_p1() {
-	translate([-top_plate_x/2, -top_plate_y/2, 0]) translate([28.06, 145, 0]) button_30mm_hole();
+	translate([33.06, 145, 0]) button_30mm_hole_for_snapins();
 }
 
 module sega_2p_plus_one() {

src/frame-left.scad

@@ -36,9 +36,9 @@ module left_frame() {
 		translate([0, 0, -top_plate_z/2]) frame_cable_routing_hole();
 
 		// aux button holes
-		translate([0, 101.5, 0]) rotate([270, 0, 0]) button_24mm_hole();
-		translate([-40, 101.5, 0]) rotate([270, 0, 0]) button_24mm_hole();
-		translate([40, 101.5, 0]) rotate([270, 0, 0]) button_24mm_hole();
+		translate([0, 100, 0]) rotate([90, 0, 0]) button_24mm_hole();
+		translate([-40, 100, 0]) rotate([90, 0, 0]) button_24mm_hole();
+		translate([40, 100, 0]) rotate([90, 0, 0]) button_24mm_hole();
 	}
 }
 

src/frame-solo.scad

@@ -29,17 +29,17 @@ module solo_frame() {
 
 		// aux button holes
 		translate([-frame_y/2+2.5, 0, 0]) rotate([0, 0, 270])
-			translate([0, 0, 0]) rotate([90, 0, 0]) button_24mm_hole();
+			translate([0, 0, 0]) rotate([90, 0, 0]) button_24mm_hole_for_snapins();
 		translate([-frame_y/2+2.5, 0, 0]) rotate([0, 0, 270])
-			translate([-40, 0, 0]) rotate([90, 0, 0]) button_24mm_hole();
+			translate([-40, 0, 0]) rotate([90, 0, 0]) button_24mm_hole_for_snapins();
 		translate([-frame_y/2+2.5, 0, 0]) rotate([0, 0, 270])
-			translate([40, 0, 0]) rotate([90, 0, 0]) button_24mm_hole();
+			translate([40, 0, 0]) rotate([90, 0, 0]) button_24mm_hole_for_snapins();
 		translate([frame_y/2-2.5, 0, 0]) rotate([0, 0, 90])
-			translate([0, 0, 0]) rotate([90, 0, 0]) button_24mm_hole();
+			translate([0, 0, 0]) rotate([90, 0, 0]) button_24mm_hole_for_snapins();
 		translate([frame_y/2-2.5, 0, 0]) rotate([0, 0, 90])
-			translate([-40, 0, 0]) rotate([90, 0, 0]) button_24mm_hole();
+			translate([-40, 0, 0]) rotate([90, 0, 0]) button_24mm_hole_for_snapins();
 		translate([frame_y/2-2.5, 0, 0]) rotate([0, 0, 90])
-			translate([40, 0, 0]) rotate([90, 0, 0]) button_24mm_hole();
+			translate([40, 0, 0]) rotate([90, 0, 0]) button_24mm_hole_for_snapins();
 	}
 }
 

src/top-panel-dir_arc-plus-w-30mm-plus-one-with-mount.scad

@@ -21,7 +21,7 @@ use <top-panel-dir_arc-plus-w-30mm-plus-one.scad>
 
 module dir_arc_w_30mm_plus_one_panel_with_mount() {
 	dir_arc_w_30mm_plus_one_panel();
-	translate([-15, -40, -(top_plate_z/2) - 3]) rotate([0, 0, -15]) pcb_mount();
+	translate([65, 55, -(top_plate_z/2) - 3]) pcb_mount();
 }
 
 dir_arc_w_30mm_plus_one_panel_with_mount();

src/top-panel-dir_arc-plus-w-30mm-plus-one.scad

@@ -20,7 +20,7 @@ include <components.scad>
 
 module dir_arc_w_30mm_plus_one_panel() {
 	difference() {
-		topplate();
+		translate([top_plate_x/2, top_plate_y/2, 0]) topplate();
 		dir_arc_w_30mm_plus_one();
 	}
 }

src/top-panel-left-lever.scad

@@ -19,17 +19,22 @@
 include <components.scad>
 
 // combine the lever mount and generic plate, with mounting holes
-module top_panel_left_lever() {
+module left_lever_panel() {
 	difference() {
 		// base plate
 		union() {
-			translate([0,-20,0]) topplate_with_raised_overhang();
+			translate([20,-20,0])
+				topplate();
 			translate([0, 0, -((top_plate_z/2)+(lever_mount_z/2))]) levermountbase();
 		}
 		// holes to mount the lever
 		levermountholes();
-		side_chopper();
 	}
 }
 
-top_panel_left_lever();
+module left_lever_panel_with_mount() {
+	left_lever_panel();
+	translate([0, -top_plate_y/2+25, -(top_plate_z/2) - 3]) pcb_mount();
+}
+
+left_lever_panel_with_mount();

src/top-panel-middle-dir_arc-plus-w-30mm-with-mount.scad

@@ -1,27 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <components.scad>
-use <top-panel-middle-dir_arc-plus-w-30mm.scad>
-
-module top_panel_middle_dir_arc_w_30mm_with_mount() {
-	top_panel_middle_dir_arc_w_30mm();
-	translate([-15, -40, -(top_plate_z/2) - 3]) rotate([0, 0, -45]) pcb_mount();
-}
-
-top_panel_middle_dir_arc_w_30mm_with_mount();

src/top-panel-middle-dir_arc-plus-w-30mm.scad

@@ -1,30 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <components.scad>
-
-module top_panel_middle_dir_arc_w_30mm() {
-	difference() {
-		topplate_with_raised_overhang();
-		dir_arc_w_30mm();
-		rotate([0, 0, 180]) side_chopper();
-		side_chopper();
-	}
-}
-
-top_panel_middle_dir_arc_w_30mm();

src/top-panel-namco-noir-plus-one.scad

@@ -20,7 +20,7 @@ include <components.scad>
 
 module namco_noir_plus_one_panel() {
 	difference() {
-		topplate();
+		translate([top_plate_x/2, top_plate_y/2, 0]) topplate();
 		noir_plus_one();
 	}
 }

src/top-panel-namco-noir-plus-two.scad

@@ -20,7 +20,7 @@ include <components.scad>
 
 module namco_noir_plus_two_panel() {
 	difference() {
-		topplate();
+		translate([top_plate_x/2, top_plate_y/2, 0]) topplate();
 		noir_plus_one();
 		translate([32.94-3.47-3.47, -78+7.37+4.49, 0]) noir_button_p1();
 	}

src/top-panel-right-sega-2p-plus-one.scad

@@ -1,29 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <components.scad>
-
-module top_panel_right_sega_2p_plus_one() {
-	difference() {
-		topplate_with_raised_overhang();
-		sega_2p_plus_one();
-		rotate([0, 0, 180]) side_chopper();
-	}
-}
-
-top_panel_right_sega_2p_plus_one();

src/top-panel-sega-2p-plus-one.scad

@@ -20,7 +20,7 @@ include <components.scad>
 
 module sega_2p_plus_one_panel() {
 	difference() {
-		topplate();
+		translate([top_plate_x/2, top_plate_y/2, 0]) topplate();
 		sega_2p_plus_one();
 	}
 }

src/top-panel-solo-dir_arc-plus-w-24mm-8-button.scad

@@ -23,7 +23,7 @@ module dir_arc_plus_w_24mm_8_button_panel() {
 	difference() {
 		rotate([0, 0, -90]) topplate_with_raised_overhang();
 		translate([-top_plate_x+105, -top_plate_y/2+123, 0]) dir_arc_24mm_8_button_compressed();
-		translate([-34.5, 51, 0]) button_24mm_hole();
+		translate([-34.5, 51, 0]) button_24mm_hole_for_snapins();
 	}
 }