src/components.scad

@@ -55,7 +55,7 @@ module frame_hex_bolt_hole() {
 }
 
 module frame_interchange_hole() {
-	cylinder(r=35, h=50, $fn=50, center=true);
+	cylinder(r=18, h=50, $fn=4, center=true);
 }
 
 module neutrik_d_hole() {
@@ -315,8 +315,7 @@ module frame_connection_holes() {
 }
 
 module frame_cable_routing_hole() {
-	// frame_y/12 is a hack for "kinda a bit above the center point"
-	translate([frame_x/2, frame_y/12, 25]) rotate([0, 90, 0]) frame_interchange_hole();
+	translate([frame_x/2, 0, 0]) rotate([0, 90, 0]) frame_interchange_hole();
 }
 
 module base_frame() {

src/extras/mount.scad

@@ -1,68 +0,0 @@
-/*
- * A stick mount that fits rectangular (non-extended) BSS sticks.
- *
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <../parameters.scad>
-include <../components.scad>
-
-holder_x = 114;
-holder_y = 60;
-holder_z = 45;
-tall_holder_post = frame_y-10;
-
-module stick_holder() {
-	difference() {
-		cube([holder_x, holder_y, holder_z], center=true);
-		translate([14, 0, 132]) rotate([90, -40, 0]) frame_solid();
-	}
-}
-
-module mount() {
-	difference() {
-		union() {
-			// lowest post
-			translate([62, -frame_z-25, holder_z/2]) stick_holder();				// top = 45
-
-			// middle post
-			translate([0, 0, ((tall_holder_post)/2)/2])
-				cube([holder_x, holder_y, (tall_holder_post)/2], center=true);
-			translate([0, 0, ((tall_holder_post)/2)+holder_z/2]) stick_holder();			// top = 139
-
-			// highest post
-			translate([-62, frame_z+25, tall_holder_post/2])
-				cube([holder_x, holder_y, tall_holder_post], center=true);
-			translate([-62, frame_z+25, tall_holder_post+holder_z/2]) stick_holder();		// top = 233
-
-			// post stabilizers
-			translate([31, -41, holder_z/2]) cube([52, 23, holder_z], center=true);
-			translate([-31, 41, ((tall_holder_post/2)+holder_z)/2])
-				cube([52, 23, (tall_holder_post/2)+holder_z], center=true);
-
-			// base
-			hull() {
-				translate([110, 103, -2.5]) cylinder(r=15, h=5, center=true);
-				translate([110, -103, -2.5]) cylinder(r=15, h=5, center=true);
-				translate([-110, 103, -2.5]) cylinder(r=15, h=5, center=true);
-				translate([-110, -103, -2.5]) cylinder(r=15, h=5, center=true);
-			}
-
-			// placard
-			translate([0, -112, 15]) cube([frame_y, 5, 30], center=true);
-
-			/* // test */
-			/* translate([62+14, -frame_z-25, 132+holder_z/2]) rotate([90, -40, 0]) frame_solid(); */
-			/* translate([14, 0, 132+(frame_y/2)-20+holder_z/2]) rotate([90, -40, 0]) frame_solid(); */
-			/* translate([-62+14, frame_z+25, 132+tall_holder_post+holder_z/2]) rotate([90, -40, 0]) frame_solid(); */
-		}
-		// text on the placard
-		translate([-frame_z*3.3/2.5, -holder_x, 15]) rotate([90, 0, 0])
-			linear_extrude(1) text("Buildable Stick System", font="Noto Sans");
-		translate([-frame_z*3.3/2.5, -holder_x, 4]) rotate([90, 0, 0])
-			linear_extrude(1) text("v4 by bss", font="Noto Sans", size=6);
-	}
-}
-
-mount();