rework the OLED mount and add it to a new panel

demo/all-together-demo-extended.scad

@@ -14,20 +14,21 @@ use <misc/decorative-plate-24mm-button.scad>
 use <misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-nine.scad>
 use <misc/dustwasher-lsx-nobi.scad>
 
-top_panel_color        = "#5B6579";
+top_panel_color        = "purple";
-bottom_panel_color     = "#8E9089";
+bottom_panel_color     = "black";
-frame_top_bottom_color = "#8E9089";
+frame_front_color      = "black";
-frame_side_color       = "#8E9089";
+frame_back_color       = "black";
-top_deco_color         = "#8E9089";
+frame_side_color       = "red";
+top_deco_color         = "white";
 
 color(top_panel_color) translate([-panel_x/2, 0, frame_z/2-panel_z+0.01]) lever_and_dir_arc_w_30mm_panel();
 color(top_panel_color) translate([panel_x/2, 0, frame_z/2-panel_z+0.01]) sega_2p_nine_plus_control_panel_with_mount();
 color(frame_side_color) translate([-frame_x/2+4, 0, -2.5]) side_trapezoid_extended_to_front_frame_piece();
 color(frame_side_color) translate([frame_x/2-4, 0, -2.5]) mirror([1, 0, 0]) side_trapezoid_extended_to_front_frame_piece();
-color(frame_top_bottom_color) translate([-frame_x/2+4, 0, -2.5])  front_or_back_trapezoid_frame_piece();
+color(frame_front_color) translate([-frame_x/2+4, 0, -2.5])  front_or_back_trapezoid_frame_piece();
-color(frame_top_bottom_color) translate([frame_x/2-4, 0, -2.5])  front_or_back_trapezoid_frame_piece();
+color(frame_front_color) translate([frame_x/2-4, 0, -2.5])  front_or_back_trapezoid_frame_piece();
-color(frame_top_bottom_color) translate([-frame_x/2+4, 0, -2.5]) rotate([180, 0, 0]) front_or_back_aux_and_neutrik_frame_piece();
+color(frame_back_color) translate([-frame_x/2+4, 0, -2.5]) rotate([180, 0, 0]) front_or_back_aux_and_neutrik_frame_piece();
-color(frame_top_bottom_color) translate([frame_x/2-4, 0, -2.5]) rotate([180, 180, 0]) front_or_back_aux_and_neutrik_frame_piece();
+color(frame_back_color) translate([frame_x/2-4, 0, -2.5]) rotate([180, 180, 0]) front_or_back_aux_and_neutrik_frame_piece();
 color(bottom_panel_color) translate([-panel_x/2, 0, -5-frame_z/2+5]) panel();
 color(bottom_panel_color) translate([panel_x/2, 0, -5-frame_z/2+5]) panel();
 

src/components.scad

@@ -119,6 +119,26 @@ module oled_ssd1306_mount_cutout() {
 	translate([0, 0, -1.0]) cube([35, 35, 4], center=true);
 }
 
+module adafruit_pid_326_oled_ssd1306_mount_post() {
+	cylinder(r=2.25/2, h=8, $fn=50, center=true);
+}
+
+// aligned to the cutout below
+module adafruit_pid_326_oled_ssd1306_mount() {
+	translate([12, 13.25, -2]) adafruit_pid_326_oled_ssd1306_mount_post();
+	translate([12, -13.25, -2]) adafruit_pid_326_oled_ssd1306_mount_post();
+	translate([-12, 13.25, -2]) adafruit_pid_326_oled_ssd1306_mount_post();
+	translate([-12, -13.25, -2]) adafruit_pid_326_oled_ssd1306_mount_post();
+}
+
+module adafruit_pid_326_oled_ssd1306_mount_cutout() {
+	translate([0, 3.5, 0]) cube([ssd1306_x, ssd1306_y, panel_z+0.1], center=true);
+	translate([0, 0, -ssd1306_z/2]) cube([adafruit_pid_326_oled_ssd1306_cutout_x,
+		adafruit_pid_326_oled_ssd1306_cutout_y, panel_z-ssd1306_z+0.1], center=true);
+	translate([0, 0, -ssd1306_z/2-2]) cube([adafruit_pid_326_oled_ssd1306_cutout_x*3/2,
+		adafruit_pid_326_oled_ssd1306_cutout_y/2, panel_z/2+0.1], center=true);
+}
+
 module m3_mount_post() {
 	difference() {
 		cylinder(r=m3_screw_selftap_radius*4, h=8, $fn=6, center=true);

src/panels/inset/lever-and-dir_arc-plus-w-30mm-panel-with-oled.scad

@@ -0,0 +1,29 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <lever-and-dir_arc-plus-w-30mm-panel.scad>
+
+module lever_and_dir_arc_w_30mm_panel_with_oled() {
+	/* // TEMP FOR PRINTING JUST THE SECTION AS A TEST */
+	/* intersection() { */
+	/* 	union() { */
+	/* 		difference() { */
+	/* 			lever_and_dir_arc_w_30mm_panel(); */
+	/* 			translate([0, -(panel_y/2 - 30), 0]) adafruit_pid_326_oled_ssd1306_mount_cutout(); */
+	/* 		} */
+	/* 		translate([0, -(panel_y/2 - 30), 0]) adafruit_pid_326_oled_ssd1306_mount(); */
+	/* 	} */
+	/* 	translate([0, -(panel_y/2-30), 0]) cube([50, 40, 10], center=true); */
+	/* } */
+	difference() {
+		lever_and_dir_arc_w_30mm_panel();
+		translate([0, -(panel_y/2 - 22), 0]) adafruit_pid_326_oled_ssd1306_mount_cutout();
+	}
+	translate([0, -(panel_y/2 - 22), 0]) adafruit_pid_326_oled_ssd1306_mount();
+}
+
+lever_and_dir_arc_w_30mm_panel_with_oled();

src/parameters.scad

@@ -134,6 +134,13 @@ stand_x = 5;
 stand_y = frame_z;
 stand_z = 15;
 
+// oled cutout stuff
+ssd1306_x = 23;
+ssd1306_y = 12;
+ssd1306_z = 1;
+adafruit_pid_326_oled_ssd1306_cutout_x = 30;
+adafruit_pid_326_oled_ssd1306_cutout_y = 32;
+
 
 // LAYOUTS