start estimating cost of build

README.md

@@ -41,7 +41,14 @@ What you'll need beyond these objects:
 * Buttons and levers as desired
 * Wiring as required
 
-### Issues and Limitations
+## Rough Costs
+
+This is a rough estimate of the cost to produce one of these sticks. Filament masses from Bambu Studio estimates, using
+Bambu PLA Basic.
+
+* Left/right frame: 141.84g (~$3.54 USD as of 2023-09-12)
+
+## Issues and Limitations
 
 This is a living repository, and as such, there are likely issues with the objects, known or otherwise.
 These issues may be fixed in the future; see `TODO.md` for details.

src/components.scad

@@ -148,8 +148,11 @@ module neutrik_d_mount() {
 	neutrik_d_hole();
 	translate([9.5, 12, 0]) neutrik_d_screw_hole();
 	translate([-9.5, -12, 0]) neutrik_d_screw_hole();
-	// clearance for cutting space out of e.g. frame wall
+}
-	translate([0, 0, 25]) cube([32, 40, 50], center=true);
+
+// space for a neutrik D mount or 24mm button
+module frame_cutout() {
+	cube([36.5, 8, 40], center=true);
 }
 
 module m3_mount_post() {

src/frame-left.scad

@@ -36,9 +36,16 @@ module left_frame() {
 		translate([0, 0, -top_plate_z/2]) frame_cable_routing_hole();
 
 		// aux button holes
-		translate([0, 101.5, 0]) rotate([270, 0, 0]) button_24mm_hole();
+		translate([-30, 101.5, 0]) rotate([270, 0, 0]) button_24mm_hole();
-		translate([-40, 101.5, 0]) rotate([270, 0, 0]) button_24mm_hole();
+		translate([-30, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
-		translate([40, 101.5, 0]) rotate([270, 0, 0]) button_24mm_hole();
+		translate([-70, 101.5, 0]) rotate([270, 0, 0]) button_24mm_hole();
+		translate([-70, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
+		translate([10, 101.5, 0]) rotate([270, 0, 0]) button_24mm_hole();
+		translate([10, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
+
+		// neutrix button hole
+		translate([70, (frame_y/2)-neutrik_panel_thickness, 0]) rotate([90, 0, 0]) neutrik_d_mount();
+		translate([70, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
 	}
 }
 

src/frame-middle.scad

@@ -40,8 +40,11 @@ module middle_frame() {
 
 		// neutrik mounts for connector, switches
 		translate([0, (frame_y/2)-neutrik_panel_thickness, 0]) rotate([90, 0, 0]) neutrik_d_mount();
+		translate([0, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
 		translate([-40, (frame_y/2)-neutrik_panel_thickness, 0]) rotate([90, 0, 0]) neutrik_d_mount();
+		translate([-40, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
 		translate([40, (frame_y/2)-neutrik_panel_thickness, 0]) rotate([90, 0, 0]) neutrik_d_mount();
+		translate([40, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
 	}
 }
 

src/frame-solo.scad

@@ -20,26 +20,35 @@ include <components.scad>
 
 module solo_frame() {
 	difference() {
-		rotate([0, 0, 90]) frame();
+		frame();
 
 		// neutrik mounts for connector, switches
-		translate([0, (frame_x/2)-2.5, 0]) rotate([90, 0, 0]) neutrik_d_mount();
+		translate([0, (frame_y/2)-2.5, 0]) rotate([90, 0, 0]) neutrik_d_mount();
-		translate([-40, (frame_x/2)-2.5, 0]) rotate([90, 0, 0]) neutrik_d_mount();
+		translate([0, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
-		translate([40, (frame_x/2)-2.5, 0]) rotate([90, 0, 0]) neutrik_d_mount();
+		translate([-40, (frame_y/2)-2.5, 0]) rotate([90, 0, 0]) neutrik_d_mount();
+		translate([-40, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
+		translate([40, (frame_y/2)-2.5, 0]) rotate([90, 0, 0]) neutrik_d_mount();
+		translate([40, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
 
 		// aux button holes
-		translate([-frame_y/2+2.5, 0, 0]) rotate([0, 0, 270])
+		translate([-frame_x/2+2.5, 0, 0]) rotate([0, 0, 270])
 			translate([0, 0, 0]) rotate([90, 0, 0]) button_24mm_hole();
-		translate([-frame_y/2+2.5, 0, 0]) rotate([0, 0, 270])
+		translate([(frame_x/2)-neutrik_panel_thickness-4, 0, 0]) rotate([0, 0, 90]) frame_cutout();
+		translate([-frame_x/2+2.5, 0, 0]) rotate([0, 0, 270])
 			translate([-40, 0, 0]) rotate([90, 0, 0]) button_24mm_hole();
-		translate([-frame_y/2+2.5, 0, 0]) rotate([0, 0, 270])
+		translate([(frame_x/2)-neutrik_panel_thickness-4, -40, 0]) rotate([0, 0, 90]) frame_cutout();
+		translate([-frame_x/2+2.5, 0, 0]) rotate([0, 0, 270])
 			translate([40, 0, 0]) rotate([90, 0, 0]) button_24mm_hole();
-		translate([frame_y/2-2.5, 0, 0]) rotate([0, 0, 90])
+		translate([(frame_x/2)-neutrik_panel_thickness-4, 40, 0]) rotate([0, 0, 90]) frame_cutout();
+		translate([frame_x/2-2.5, 0, 0]) rotate([0, 0, 90])
 			translate([0, 0, 0]) rotate([90, 0, 0]) button_24mm_hole();
-		translate([frame_y/2-2.5, 0, 0]) rotate([0, 0, 90])
+		translate([-(frame_x/2)+neutrik_panel_thickness+4, 0, 0]) rotate([0, 0, 90]) frame_cutout();
+		translate([frame_x/2-2.5, 0, 0]) rotate([0, 0, 90])
 			translate([-40, 0, 0]) rotate([90, 0, 0]) button_24mm_hole();
-		translate([frame_y/2-2.5, 0, 0]) rotate([0, 0, 90])
+		translate([-(frame_x/2)+neutrik_panel_thickness+4, -40, 0]) rotate([0, 0, 90]) frame_cutout();
+		translate([frame_x/2-2.5, 0, 0]) rotate([0, 0, 90])
 			translate([40, 0, 0]) rotate([90, 0, 0]) button_24mm_hole();
+		translate([-(frame_x/2)+neutrik_panel_thickness+4, 40, 0]) rotate([0, 0, 90]) frame_cutout();
 	}
 }