src/components.scad

@@ -92,13 +92,6 @@ module frame_cutout() {
 	cube([36.5, 8, frame_z-(top_plate_z*2)], center=true);
 }
 
-// bank of three 24mm buttons, commonly on a frame face
-module aux_control_three_button_cluster() {
-	translate([-40, 0, 0]) button_24mm_hole();
-	translate([0, 0, 0]) button_24mm_hole();
-	translate([40, 0, 0]) button_24mm_hole();
-}
-
 module m2_mount_post() {
 	difference() {
 		cylinder(r=m2_screw_selftap_radius*2.25, h=3, $fn=6, center=true);

src/frame-left.scad

@@ -37,9 +37,11 @@ module left_frame() {
 		frame_cable_routing_hole();
 
 		// aux button holes
-		translate([-30, 101.5, 0]) rotate([270, 0, 0]) aux_control_three_button_cluster();
+		translate([-30, 101.5, 0]) rotate([270, 0, 0]) button_24mm_hole();
 		translate([-30, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
+		translate([-70, 101.5, 0]) rotate([270, 0, 0]) button_24mm_hole();
 		translate([-70, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
+		translate([10, 101.5, 0]) rotate([270, 0, 0]) button_24mm_hole();
 		translate([10, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
 
 		// neutrix button hole

src/frame-right.scad

@@ -37,9 +37,11 @@ module right_frame() {
 		mirror([1, 0, 0]) frame_cable_routing_hole();
 
 		// aux button holes
-		translate([30, 101.5, 0]) rotate([270, 0, 0]) aux_control_three_button_cluster();
+		translate([30, 101.5, 0]) rotate([270, 0, 0]) button_24mm_hole();
 		translate([30, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
+		translate([70, 101.5, 0]) rotate([270, 0, 0]) button_24mm_hole();
 		translate([70, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
+		translate([-10, 101.5, 0]) rotate([270, 0, 0]) button_24mm_hole();
 		translate([-10, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
 
 		// neutrix button hole

src/frame-solo.scad

@@ -32,14 +32,23 @@ module solo_frame() {
 		translate([40, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
 
 		// aux button holes
-		translate([-frame_x/2+2.5, 0, 0]) rotate([90, 0, 270]) aux_control_three_button_cluster();
+		translate([-frame_x/2+2.5, 0, 0]) rotate([0, 0, 270])
+			translate([0, 0, 0]) rotate([90, 0, 0]) button_24mm_hole();
 		translate([(frame_x/2)-neutrik_panel_thickness-4, 0, 0]) rotate([0, 0, 90]) frame_cutout();
+		translate([-frame_x/2+2.5, 0, 0]) rotate([0, 0, 270])
+			translate([-40, 0, 0]) rotate([90, 0, 0]) button_24mm_hole();
 		translate([(frame_x/2)-neutrik_panel_thickness-4, -40, 0]) rotate([0, 0, 90]) frame_cutout();
+		translate([-frame_x/2+2.5, 0, 0]) rotate([0, 0, 270])
+			translate([40, 0, 0]) rotate([90, 0, 0]) button_24mm_hole();
 		translate([(frame_x/2)-neutrik_panel_thickness-4, 40, 0]) rotate([0, 0, 90]) frame_cutout();
-
+		translate([frame_x/2-2.5, 0, 0]) rotate([0, 0, 90])
-		translate([frame_x/2+2.5, 0, 0]) rotate([90, 0, 270]) aux_control_three_button_cluster();
+			translate([0, 0, 0]) rotate([90, 0, 0]) button_24mm_hole();
 		translate([-(frame_x/2)+neutrik_panel_thickness+4, 0, 0]) rotate([0, 0, 90]) frame_cutout();
+		translate([frame_x/2-2.5, 0, 0]) rotate([0, 0, 90])
+			translate([-40, 0, 0]) rotate([90, 0, 0]) button_24mm_hole();
 		translate([-(frame_x/2)+neutrik_panel_thickness+4, -40, 0]) rotate([0, 0, 90]) frame_cutout();
+		translate([frame_x/2-2.5, 0, 0]) rotate([0, 0, 90])
+			translate([40, 0, 0]) rotate([90, 0, 0]) button_24mm_hole();
 		translate([-(frame_x/2)+neutrik_panel_thickness+4, 40, 0]) rotate([0, 0, 90]) frame_cutout();
 	}
 }

src/misc-decorative-plate-aux-control-three-button-cluster.scad

@@ -1,33 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of the Buildable Stick System.
- *
- * The Buildable Stick System is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * The Buildable Stick System is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <parameters.scad>
-include <components.scad>
-use <misc-neutrik-d-plate.scad>
-
-module aux_control_three_button_cluster_decorative_plate() {
-	difference() {
-		hull() {
-			translate([-50, 0, 0]) neutrik_d_plate();
-			translate([50, 0, 0]) neutrik_d_plate();
-		}
-		translate([0, 0, -10]) aux_control_three_button_cluster();
-	}
-}
-
-aux_control_three_button_cluster_decorative_plate();