add a decorative plate for the neutrik + rocker mounts

src/components.scad

@@ -87,6 +87,13 @@ module neutrik_d_mount() {
 	translate([-9.5, -12, 0]) neutrik_d_screw_hole();
 }
 
+module rocker_20mm_mount() {
+	cylinder(r=10+hole_tolerance, h=5, $fn=50, center=true);
+	cube([2.2, 22, 5], center=true);
+	translate([9.5, 12, 0]) neutrik_d_screw_hole();
+	translate([-9.5, -12, 0]) neutrik_d_screw_hole();
+}
+
 // space for a neutrik D mount or 24mm button - Z is to cut the whole inside without affecting panel lip
 module frame_cutout() {
 	cube([36.5, 8, frame_z-(top_plate_z*2)], center=true);
@@ -224,7 +231,7 @@ module frame_mount_column() {
 }
 
 module side_chopper() {
-	translate([frame_x/2+4, 0, 0]) cube([16, 2*(frame_y+top_plate_y), 2*(frame_z+top_plate_z)], center=true);
+	translate([(frame_x-frame_wall)/2, 0, 0]) cube([frame_wall, frame_y, frame_z], center=true);
 }
 
 module frame_connection_holes() {

src/frame-left.scad

@@ -43,8 +43,10 @@ module left_frame() {
 		translate([10, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
 
 		// neutrix button hole
-		translate([70, (frame_y/2)-neutrik_panel_thickness, 0]) rotate([90, 0, 0]) neutrik_d_mount();
+		translate([frame_center_to_neutrik, (frame_y/2)-neutrik_panel_thickness, 0])
-		translate([70, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
+			rotate([90, 0, 0]) neutrik_d_mount();
+		translate([frame_center_to_neutrik, (frame_y/2)-neutrik_panel_thickness-4, 0])
+			frame_cutout();
 	}
 }
 

src/frame-right.scad

@@ -43,8 +43,10 @@ module right_frame() {
 		translate([-10, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
 
 		// neutrix button hole
-		translate([-70, (frame_y/2)-neutrik_panel_thickness, 0]) rotate([90, 0, 0]) neutrik_d_mount();
+		translate([-frame_center_to_neutrik, (frame_y/2)-neutrik_panel_thickness, 0])
-		translate([-70, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
+			rotate([90, 0, 0]) neutrik_d_mount();
+		translate([-frame_center_to_neutrik, (frame_y/2)-neutrik_panel_thickness-4, 0])
+			frame_cutout();
 	}
 }
 

src/misc-decorative-plate-aux-connectors-neutrik-and-rocker-cluster.scad

@@ -0,0 +1,34 @@
+/* Copyright Brian Stephan 2023
+ *
+ * This file is part of the Buildable Stick System.
+ *
+ * The Buildable Stick System is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 3 of the License, or (at your
+ * option) any later version.
+ *
+ * The Buildable Stick System is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * the Buildable Stick System. If not, see <https://www.gnu.org/licenses/>.
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <misc-neutrik-d-plate.scad>
+
+module aux_connectors_two_neutrik_cluster_decorative_plate() {
+	difference() {
+		hull() {
+			translate([-50, 0, 0]) neutrik_d_plate();
+			translate([50, 0, 0]) neutrik_d_plate();
+		}
+		translate([(frame_x/2)-frame_center_to_neutrik-frame_wall, 0, 0]) rocker_20mm_mount();
+		translate([-((frame_x/2)-frame_center_to_neutrik-frame_wall), 0, 0]) neutrik_d_mount();
+	}
+}
+
+aux_connectors_two_neutrik_cluster_decorative_plate();

src/misc-neutrik-d-plate-24mm-hole.scad

@@ -23,7 +23,7 @@ use <misc-neutrik-d-plate.scad>
 module neutrik_d_plate_24mm() {
 	difference() {
 		neutrik_d_plate();
-		cylinder(r=12+hole_tolerance, h=5, $fn=50, center=true);
+		neutrik_d_mount();
 	}
 }
 

src/misc-rocker-20mm-plate.scad

@@ -20,12 +20,11 @@ include <parameters.scad>
 include <components.scad>
 use <misc-neutrik-d-plate.scad>
 
-module neutrik_d_plate_20mm() {
+module rocker_plate_20mm() {
 	difference() {
 		neutrik_d_plate();
-		cylinder(r=10+hole_tolerance, h=5, $fn=50, center=true);
+		rocker_20mm_mount();
-		cube([2.2, 22, 5], center=true);
 	}
 }
 
-neutrik_d_plate_20mm();
+rocker_plate_20mm();

src/parameters.scad

@@ -50,6 +50,8 @@ frame_x = 233;
 frame_y = 208;
 frame_z = 55;
 
+frame_center_to_neutrik = 70;
+
 // depth of the "lip" of the frame that the top plate sets into/supports the overhang
 frame_wall = 4;