Makefile

@@ -1,5 +1,9 @@
-all:
-	python build.py
+EXCLUDES = blown-up-demo components parameters
+OBJECTS := $(filter-out $(EXCLUDES),$(patsubst src/%.scad,%,$(wildcard src/*.scad)))
+dir_guard=@mkdir -p ./build
+
+all:	$(OBJECTS)
+	$(dir_guard)
 	mkdir -p ./build/docs
 	cp ./docs/README-objects.md ./build/README.md
 	cp ./docs/assembly-and-tips.md ./build/docs/assembly-and-tips.md
@@ -7,5 +11,9 @@ all:
 	cp ./LICENSE ./build/LICENSE
 	pushd ./build; zip ./buildable-stick-system-`git describe --dirty`-stls.zip . -r; popd
 
+$(OBJECTS):
+	$(dir_guard)
+	openscad -o build/$@.stl src/$@.scad
+
 clean:
 	rm -rf ./build

README.md

@@ -11,7 +11,7 @@ know someone or a library with a 3D printer? The Buildable Stick System may be t
 
 [OpenSCAD-based illustration of how the components for an overhang panel-based stick fit together.]
 
-![A photo of a completed stick](docs/finished-v4.4.jpg)
+![A photo of a completed stick](docs/finished-v4.2.jpg)
 
 [Photo of a completed inset panel-based stick.]
 
@@ -30,42 +30,19 @@ starting with an existing object and constructing what you'd like with new or ex
 ## Usage of Parts
 
 There are a lot of parts to pick from, but there are some structural variants to pay attention to; here's some help
-about what the types of parts are and how to use them:
+about when/how to use specific parts:
 
-* `frames/`
-    * `complete/` --- these are the four walls of the frame as one piece, in a couple variations for combining into
-      larger arcade sticks. They are simple to assemble, but you have fewer modularity/customization options, and they
-      are harder to print because the physics of the material cooling will probably pull the corners up. They also need
-      supports, since the top and bottom of the frame both have trays for panels to go into. Use at your own risk.
-    * `pieces/`
-        * `box/` --- these are the same four walls (generally speaking) as in the complete frames above, broken out into
-          modular pieces to print separately. Because they are separate pieces, you can mix and match colors, and you
-          can lay them all face down on the print surface for better adhesion and surface patterns. There are also
-          variants here, the "windowed" pieces, for doing two-tone variants and that kind of thing.
-        * `extended/` --- the frame walls are pulled out to create MCZ TE-style extended sides. Rather than getting a
-          box look, you get a longer slab with nice bevels. These look nice, but slightly fiddily to print (and of
-          course need more material) --- watch your surface adhesion.
-        * `interconnect` --- complete frames are bolted to one another, but for frame pieces, there is an interconnect
-          that stands in for the joined inner wall. You need this if you are combining multiple sets of walls, e.g. for
-          a two-panel-long stick.
-* `panels/`
-    * `inset/` --- various panels, all of the same size, that fit into and flush with the frame, making the arcade stick
-      top or bottom. These work equally well with box or extended frames, and aside from using up a bit of the space
-      inside the frame, come with no downsides --- they print easily and are a pretty simple shape to tweak and remix.
-    * `overhang/` --- overhang panels have their plane extending over the edge of the frame, creating a bit of a
-      sandwich look. This is mostly an aesthetic choice, but they sit higher in the frame as well, the main panel being
-      over/under the frame rather than within it. This extra space is useful for taller levers. The only downside to
-      these is that they aren't as reusable as the inset panels, since the inset panels can go anywhere, but the
-      overhang panels must be designed to not overlap with other overhang panels, so you might have to make more custom
-      variants depending on where you put things.
-* `misc/`
-    * Pieces that I haven't organized better (yet) --- there are decorative plates for top buttons and similar to give
-      more color variance and some layers to the arcade stick, some very simple dustwashers, plates that fit rocker
-      switches and the like in Neutrik D or 20mm holes, and a lever mount spacer for getting your lever shaft at the
-      desired height. You don't *need* any of these, but you'll probably use a few.
-* `extras/`
-    * Various experiments and things not directly related to making an arcade stick. At time of writing, there's a
-      couple pieces for a little stand for the stick, solely for vanity purposes.
+* `panel-inset` --- these fit flush into a frame, creating a closed box enclosure.
+* `panel-overhang` --- these have a tray that fits into a frame with the actual face extending beyond the frame,
+  creating an ice cream sandwich enclosure.
+    * These also yield a bit more space inside the box, for tall levers or whatever.
+* `frame` (non-pieces) --- these create the box of the enclosure, as one part. These can be hard to print well ---
+  shrinkage forces tend to curl up the corners no matter what you do, and some points need supports --- but if you don't
+  care about that because you're printing an ice cream sandwich, they are simpler than...
+* `frame-piece` --- these break up the frame box into four faces, and are held together by friction fit and the hex
+  bolts. This is more stable than you might expect, but it does introduce some variability in the overall sturdiness of
+  the enclosure compared with the frame as one box piece.
+    * The `interconnect` replaces the need to bolt multiple frames together.
 
 ## Printing
 
@@ -80,14 +57,14 @@ What you'll need beyond these objects:
 * An arcade stick board (I recommend [TheTrain's RP2040 Advanced Breakout
   Board](https://github.com/OpenStickCommunity/Hardware/tree/main/RP2040%20Advanced%20Breakout%20Board))
     * 4 M3 8mm hex bolts to secure the PCB to a panel
-* Per frame and panel combo:
+* Per frame and plate combo:
     * 4 45mm M4 hex brass standoffs (or equivalent)
     * 8 M4 countersunk hex bolts
-        * Overhang panels should use 12-16mm length bolts since they are taller
-        * Inset panels should probably use 8-12mm bolts --- some standoffs aren't threaded the whole way, making 16mm
+        * Overhang plates should use 12-16mm length bolts since they are taller
+        * Inset plates should probably use 8-12mm bolts --- some standoffs aren't threaded the whole way, making 16mm
           too long to go flush
         * If making the 45mm standoffs from multiple smaller ones, make sure they have enough length to take your bolts!
-* Per frame connection point (only necessary if you are using complete frames and not frame pieces):
+* Per frame connection point:
     * 8 16mm M4 bolts
     * 8 M4 flange nuts
 * For a lever:
@@ -122,8 +99,8 @@ Filament masses from Bambu Studio estimates, using Bambu PLA Basic, 20% gyroid i
       stick anyway
     * You can also use a shorter length with longer bolts, or combine multiple standoffs, if either of those yield better
       prices
-* 8 16mm M4 bolts to connect top panels to frames: **$0.72 USD** (you can get a pack of 100 on Amazon for $9, as of
-* 8 12mm M4 bolts to connect bottom panels to frames: **$0.72 USD** (you can get a pack of 100 on Amazon for $9, as of
+* 8 16mm M4 bolts to connect top plates to frames: **$0.72 USD** (you can get a pack of 100 on Amazon for $9, as of
+* 8 12mm M4 bolts to connect bottom plates to frames: **$0.72 USD** (you can get a pack of 100 on Amazon for $9, as of
   2023-09-12)
 
 With an enclosure coming in around $31, depending on your choices --- say, ~$30 for TheTrain's RP2040 Advanced Breakout

TODO.md

@@ -4,4 +4,4 @@ Notes for "next time".
 
 ## v4.x
 
-* Engraving some cosmetic stuff? Or maybe a place to mount other plates on the top?
+* Engraving some cosmetic stuff? Or maybe a place to mount other plates?

build.py

@@ -1,50 +0,0 @@
-"""Compile all OpenSCAD files into a build directory and package it with docs.
-
-(a.k.a.: "make is hard"
-
-SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
-SPDX-License-Identifier: GPL-3.0-or-later
-"""
-import os
-import os.path
-import re
-import subprocess
-
-PROJECT_ROOT = os.path.abspath(os.getcwd())
-BUILD_DIR = os.path.join(PROJECT_ROOT, 'build/')
-SOURCE_DIR = os.path.join(PROJECT_ROOT, 'src/')
-
-EXCLUDES = ['components.scad', 'parameters.scad']
-
-# set up our environment to point openscad at the right stuff
-os.environ['OPENSCADPATH'] = SOURCE_DIR
-
-# track processes to wait on
-processes = []
-
-os.chdir(SOURCE_DIR)
-for root, dirs, files in os.walk('.'):
-    print(f"{root} {dirs} {files}")
-    # make the current directory so that openscad can write stuff into it
-    try:
-        os.makedirs(os.path.join(BUILD_DIR, root))
-    except FileExistsError:
-        pass
-
-    input_dir = os.path.join(SOURCE_DIR, root)
-    output_dir = os.path.join(BUILD_DIR, root)
-    for file in files:
-        if not re.match(r'.*\.scad$', file):
-            continue
-        if file in EXCLUDES:
-            continue
-
-        stl_file = re.sub(r'\.scad$', '.stl', file)
-        input_ = os.path.join(input_dir, file)
-        output = os.path.join(output_dir, stl_file)
-        cmd = f'openscad -o {output} {input_}'
-        print(cmd)
-        processes.append(subprocess.Popen(cmd.split(' ')))
-
-for process in processes:
-    process.wait()

demo/all-together-demo-extended.scad

@@ -1,38 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <frames/pieces/extended/front-or-back.scad>
-use <frames/pieces/extended/side-extended-to-bottom.scad>
-use <frames/pieces/extended/front-or-back-clean-for-extended-side-aux-and-neutrik.scad>
-use <panels/inset/lever-and-dir_arc-plus-w-30mm-panel.scad>
-use <panels/inset/sega-2p-plus-one-plus-control-panel-with-mount.scad>
-use <misc/decorative-plate-24mm-button.scad>
-use <misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one.scad>
-use <misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one-plates.scad>
-use <misc/dustwasher-lsx-nobi.scad>
-
-top_panel_color        = "#5B6579";
-bottom_panel_color     = "#8E9089";
-frame_top_bottom_color = "#8E9089";
-frame_side_color       = "#8E9089";
-top_deco_color         = "#8E9089";
-
-color(top_panel_color) translate([-panel_x/2, 0, frame_z/2-panel_z+0.01]) lever_and_dir_arc_w_30mm_panel();
-color(top_panel_color) translate([panel_x/2, 0, frame_z/2-panel_z+0.01]) sega_2p_plus_one_plus_control_panel_with_mount();
-color(frame_side_color) translate([-frame_x/2+4, 0, -2.5]) extra_extended_left_or_right_frame_piece();
-color(frame_side_color) translate([frame_x/2-4, 0, -2.5]) mirror([1, 0, 0]) extra_extended_left_or_right_frame_piece();
-color(frame_top_bottom_color) translate([-frame_x/2+4, 0, -2.5])  extended_front_or_back_frame_piece();
-color(frame_top_bottom_color) translate([frame_x/2-4, 0, -2.5])  extended_front_or_back_frame_piece();
-color(frame_top_bottom_color) translate([-frame_x/2+4, 0, -2.5]) rotate([180, 0, 0]) front_or_back_aux_and_neutrik_box_frame_piece_for_extended_side();
-color(frame_top_bottom_color) translate([frame_x/2-4, 0, -2.5]) rotate([180, 180, 0]) front_or_back_aux_and_neutrik_box_frame_piece_for_extended_side();
-color(bottom_panel_color) translate([-panel_x/2, 0, -5-frame_z/2+5]) panel();
-color(bottom_panel_color) translate([panel_x/2, 0, -5-frame_z/2+5]) panel();
-
-/* color(top_deco_color) translate([0, 0, 3+frame_z/2-4]) dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate_of_plates(); */
-color(top_deco_color) translate([0, 0, 3+frame_z/2-panel_z]) dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate();
-color(top_deco_color) translate([-170, 20, 3+frame_z/2-panel_z]) lsx_nobi_dustwasher();
-color(top_deco_color) translate([panel_x-24, 30, 3+frame_z/2-panel_z]) button_24mm_decorative_plate();

demo/all-together-demo.scad

@@ -1,35 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <frames/complete/left-frame.scad>
-use <frames/pieces/box/side.scad>
-use <frames/pieces/box/front-or-back.scad>
-use <frames/pieces/box/front-or-back-aux-and-neutrik.scad>
-use <panels/inset/lever-and-dir_arc-plus-w-30mm-panel.scad>
-use <panels/inset/sega-2p-plus-one-plus-control-panel-with-mount.scad>
-use <misc/decorative-plate-24mm-button.scad>
-use <misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one.scad>
-use <misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one-plates.scad>
-use <misc/dustwasher-lsx-nobi.scad>
-
-panel_color    = "red";
-base_color     = "gray";
-top_deco_color = "white";
-
-color(panel_color) translate([-panel_x/2, 0, frame_z/2-panel_z+0.01]) lever_and_dir_arc_w_30mm_panel();
-color(panel_color) translate([panel_x/2, 0, frame_z/2-panel_z+0.01]) sega_2p_plus_one_plus_control_panel_with_mount();
-color(base_color) translate([-frame_x/2+5, 0, -2.5]) left_frame();
-color(base_color) translate([panel_x/2, 0, -2.5]) rotate([0, 180, 0]) side_box_frame_piece();
-color(base_color) translate([panel_x/2, 0, -2.5]) front_or_back_box_frame_piece();
-color(base_color) translate([panel_x/2, 0, -2.5]) rotate([180, 180, 0]) front_or_back_aux_and_neutrik_box_frame_piece();
-color(base_color) translate([-panel_x/2, 0, -5-frame_z/2+5]) panel();
-color(base_color) translate([panel_x/2, 0, -5-frame_z/2+5]) panel();
-
-/* color(top_deco_color) translate([0, 0, 3+frame_z/2-4]) dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate_of_plates(); */
-color(top_deco_color) translate([0, 0, 3+frame_z/2-panel_z]) dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate();
-color(top_deco_color) translate([-170, 20, 3+frame_z/2-panel_z]) lsx_nobi_dustwasher();
-color(top_deco_color) translate([panel_x-24, 30, 3+frame_z/2-panel_z]) button_24mm_decorative_plate();

demo/blown-up-demo.scad

@@ -1,33 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <frames/pieces/interconnect.scad>
-use <frames/pieces/box/side.scad>
-use <frames/pieces/box/front-or-back.scad>
-use <frames/pieces/box/front-or-back-aux-and-neutrik.scad>
-use <panels/overhang/left-lever-and-dir_arc-plus-w-30mm-panel.scad>
-use <panels/overhang/right-sega-2p-plus-one-plus-control-panel-with-mount.scad>
-use <panels/overhang/left-or-right-panel.scad>
-use <misc/decorative-plate-24mm-button.scad>
-use <misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one.scad>
-use <misc/dustwasher-lsx-nobi.scad>
-
-color("#C12E1F") translate([-panel_x/2-25, 0, frame_z/2+75]) lever_and_dir_arc_w_30mm_left_overhang_panel();
-color("#C12E1F") translate([panel_x/2+25, 0, frame_z/2+75]) sega_2p_plus_one_plus_control_right_overhang_panel_with_mount();
-color("black") translate([-frame_x/2+5-25, -55, -2.5]) front_or_back_box_frame_piece();
-color("black") rotate([0, 180, 0]) translate([-frame_x/2+5-25, -55, -2.5]) front_or_back_box_frame_piece();
-color("black") translate([-frame_x/2+5-50, 0, -2.5]) side_box_frame_piece();
-color("black") rotate([0, 180, 0]) translate([-frame_x/2+5-50, 0, -2.5]) side_box_frame_piece();
-color("black") rotate([180, 0, 0]) translate([-frame_x/2+5-25, -55, -2.5]) front_or_back_aux_and_neutrik_box_frame_piece();
-color("black") rotate([180, 0, 0]) rotate([0, 180, 0]) translate([-frame_x/2+5-25, -55, -2.5]) front_or_back_aux_and_neutrik_box_frame_piece();
-color("black") rotate([0, 180, 0]) interconnect_frame_piece();
-color("#C12E1F") translate([-panel_x/2-25, 0, -5-frame_z/2-75]) left_or_right_overhang_panel();
-color("#C12E1F") mirror([0, 1, 0]) translate([panel_x/2+25, 0, -5-frame_z/2-75]) left_or_right_overhang_panel();
-
-color("black") translate([0, 0, 3+frame_z/2+150]) dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate();
-color("black") translate([-195, 25, 3+frame_z/2+150]) lsx_nobi_dustwasher();
-color("black") translate([panel_x, 25, 3+frame_z/2+150]) button_24mm_decorative_plate();

docs/README-objects.md

@@ -6,40 +6,26 @@ Files for 3D printing an arcade stick.
 
 The following notes document the objects in the Buildable Stick System and how you can use them:
 
-* `frames/`
-    * `complete/` --- these are the four walls of the frame as one piece, in a couple variations for combining into
-      larger arcade sticks. They are simple to assemble, but you have fewer modularity/customization options, and they
-      are harder to print because the physics of the material cooling will probably pull the corners up. They also need
-      supports, since the top and bottom of the frame both have trays for panels to go into. Use at your own risk.
-    * `pieces/`
-        * `box/` --- these are the same four walls (generally speaking) as in the complete frames above, broken out into
-          modular pieces to print separately. Because they are separate pieces, you can mix and match colors, and you
-          can lay them all face down on the print surface for better adhesion and surface patterns. There are also
-          variants here, the "windowed" pieces, for doing two-tone variants and that kind of thing.
-        * `extended/` --- the frame walls are pulled out to create MCZ TE-style extended sides. Rather than getting a
-          box look, you get a longer slab with nice bevels. These look nice, but slightly fiddily to print (and of
-          course need more material) --- watch your surface adhesion.
-        * `interconnect` --- complete frames are bolted to one another, but for frame pieces, there is an interconnect
-          that stands in for the joined inner wall. You need this if you are combining multiple sets of walls, e.g. for
-          a two-panel-long stick.
-* `panels/`
-    * `inset/` --- various panels, all of the same size, that fit into and flush with the frame, making the arcade stick
-      top or bottom. These work equally well with box or extended frames, and aside from using up a bit of the space
-      inside the frame, come with no downsides --- they print easily and are a pretty simple shape to tweak and remix.
-    * `overhang/` --- overhang panels have their plane extending over the edge of the frame, creating a bit of a
-      sandwich look. This is mostly an aesthetic choice, but they sit higher in the frame as well, the main panel being
-      over/under the frame rather than within it. This extra space is useful for taller levers. The only downside to
-      these is that they aren't as reusable as the inset panels, since the inset panels can go anywhere, but the
-      overhang panels must be designed to not overlap with other overhang panels, so you might have to make more custom
-      variants depending on where you put things.
-* `misc/`
-    * Pieces that I haven't organized better (yet) --- there are decorative plates for top buttons and similar to give
-      more color variance and some layers to the arcade stick, some very simple dustwashers, plates that fit rocker
-      switches and the like in Neutrik D or 20mm holes, and a lever mount spacer for getting your lever shaft at the
-      desired height. You don't *need* any of these, but you'll probably use a few.
-* `extras/`
-    * Various experiments and things not directly related to making an arcade stick. At time of writing, there's a
-      couple pieces for a little stand for the stick, solely for vanity purposes.
+* `bottom-panel-inset`: a simple solid panel that fits into the bottom of a frame box.
+* `bottom-panel-overhang-*`: solid panels whose base fits into the bottom of a frame box, but have a longer sheet that
+  extends beyond the frame, creating a sandwich kind of look; the various forms hang over more or less of the frame,
+  expecting it will be connected to other frames.
+* `frame-{left,middle,right,solo}`: the core frame of the stick, these are complete boxes; since they are long and
+  narrow, and need supports to print the space for the insets, these may be difficult to print nicely.
+* `frame-piece-*`: the core frame broken up by individual faces, which are easier to print and essentially just as
+  sturdy.
+* `frame-piece-*-extended*`: frame pieces that have been stretched out beyond the normal frame dimensions in order to
+  make a nice bevel on the sides and/or bottom; this, interestingly, tends to make the stick look a bit thinner than if
+  it was just a simple box.
+* `misc-decorative-plate-*`: things you can print to snazz up face buttons mounting, auxillary button points, etc..
+* `misc-dustwasher-*`: simple dustwashers for levers.
+* `misc-lever-mount-*`: lever mounts of various shapes and depths to get the desired lever height when mounting a lever
+  to a panel (with the appropriate cutouts).
+* `misc-neutrik-*`: like the decorative plates, but these are a bit more necessary by their design.
+* `misc-rocker-*`: rocker SPDT switches don't have mounting holes, this allows you to attach them to the frame.
+* `top-panel-inset-*`: various lever and/or button layouts for using as the face(s) of a stick.
+* `top-panel-overhang-`: same idea as the inset top panels, but overhung over the frame to make the sandwich look; these
+  also leave a bit more space inside the frame, which might accommodate a taller lever.
 
 Feel free to request or contribute to more objects, see the links to Git repos below.
 

docs/assembly-and-tips.md

@@ -8,21 +8,21 @@ Assembly of a stick is pretty straightforward, but there are some choices that c
 following is the most consistent way I've found to put one together. This is assuming a v4.2 or beyond stick, with two
 panels to make a long standard stick, and the frame made of pieces.
 
-1. Prepare the frame pieces: this is your best shot to get the e.g. Neutrik plates for the USB mount, SPDT switches, etc.
-   installed, so do it now, and give them a good tighten. You shouldn't need to adjust these again, so finish their
-   installation while the pieces are free.
-    1. You could also do the decorative plates and related buttons, but it might be just as well to leave those for step 7,
-       just to make sure the buttons don't get in the way of other buttons or a lever or so on.
-2. Start the top panels: you want both to get the components installed now when it's easy, and to make sure that the
-   overall assembly works with your components, so again get your buttons, lever, etc., in place. You can secure them at
-   this point.
+1. Prepare the frame top pieces --- `frame-piece-top-left-or-right`: this is your best shot to get auxillary buttons,
+   panel connectors, and the like installed, so do it now, and give them a good tighten. You shouldn't need to adjust
+   these again, so finish their installation while the pieces are free.
+    1. This of course includes decorative plates --- e.g. `misc-decorative-plate-aux-control-three-button-cluster` ---
+       you may choose to use. These are held to the top pieces by the buttons or component mounting screws.
+2. Start the top panels --- `top-panel-(inset|overhang)-*`: you want both to get the components installed now
+   when it's easy, and to make sure that the overall assembly works with your components, so again get your buttons,
+   lever, etc., in place. You can secure them at this point.
     1. If you are using a button decorative plate that spans two panels --- e.g.
-       `misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one` --- take care to align the two panels as tightly
-       as possible, and accurately, as they will be hard to adjust once everything is secured and in the frame.
-    2. If using a lever, don't forget the lever mount spacer --- `misc/lever-mount-sanwa-seimitsu` --- if you want it,
-       and tighten those mounting bolts now as well.
-3. Create the frame box by combining your frame piece parts, box or extended, together. This will be relatively stable
-   just via friction fit.
+       `src/misc-decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one` --- take care to align the two panels as
+       tightly as possible, and accurately, as they will be hard to adjust once everything is secured and in the frame.
+    2. If using a lever, don't forget the lever mount spacer --- `src/misc-lever-mount-sanwa-seimitsu` --- if you want
+       it, and tighten those mounting bolts now as well.
+3. Create the frame box by combining your `frame-piece-*` parts together. This will be relatively stable just via
+   friction fit.
 4. Rest the frame top-up on a desk, and put the standoffs through the holes. This will probably be tight, and you may
    even need a rubber mallet or similar to drive the standoffs through the holes.
 5. Insert the top panels into the frame.

src/blown-up-demo.scad

@@ -0,0 +1,34 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <frame-piece-bottom-left-or-right.scad>
+use <frame-piece-interconnect.scad>
+use <frame-piece-side.scad>
+use <frame-piece-top-left-or-right.scad>
+use <top-panel-overhang-left-lever-and-dir_arc-plus-w-30mm.scad>
+use <top-panel-overhang-right-sega-2p-plus-one-plus-control-with-mount.scad>
+use <bottom-panel-overhang-left.scad>
+use <bottom-panel-overhang-right.scad>
+use <misc-decorative-plate-24mm-button.scad>
+use <misc-decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one.scad>
+use <misc-dustwasher-lsx-nobi.scad>
+
+color("#C12E1F") translate([-panel_x/2-25, 0, frame_z/2+75]) top_panel_left_lever_and_dir_arc_w_30mm();
+color("#C12E1F") translate([panel_x/2+25, 0, frame_z/2+75]) top_panel_right_sega_2p_plus_one_plus_control_with_mount();
+color("black") translate([-frame_x/2+5-25, 35, -2.5]) top_left_or_right_frame_piece();
+color("black") rotate([0, 180, 0]) translate([-frame_x/2+5-25, 35, -2.5]) top_left_or_right_frame_piece();
+color("black") translate([-frame_x/2+5-50, 0, -2.5]) side_frame_piece();
+color("black") rotate([0, 180, 0]) translate([-frame_x/2+5-50, 0, -2.5]) side_frame_piece();
+color("black") translate([-frame_x/2+5-25, -35, -2.5]) bottom_left_or_right_frame_piece();
+color("black") rotate([0, 180, 0]) translate([-frame_x/2+5-25, -35, -2.5]) bottom_left_or_right_frame_piece();
+color("black") interconnect_frame_piece();
+color("#C12E1F") translate([-panel_x/2-25, 0, -5-frame_z/2-75]) bottom_panel_left();
+color("#C12E1F") translate([panel_x/2+25, 0, -5-frame_z/2-75]) bottom_panel_right();
+
+color("black") translate([0, 0, 3+frame_z/2+150]) dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate();
+color("black") translate([-195, 25, 3+frame_z/2+150]) lsx_nobi_dustwasher();
+color("black") translate([panel_x, 25, 3+frame_z/2+150]) button_24mm_decorative_plate();

src/bottom-panel-inset.scad

@@ -6,4 +6,4 @@
 include <parameters.scad>
 include <components.scad>
 
-panel();
+bottom_panel();

src/bottom-panel-overhang-left.scad

@@ -5,14 +5,14 @@
 
 include <parameters.scad>
 include <components.scad>
-use <solo-panel.scad>
+use <bottom-panel-overhang-solo.scad>
 
-module left_or_right_overhang_panel() {
+module bottom_panel_left() {
 	difference() {
-		solo_overhang_panel();
+		bottom_panel_solo();
 		// chop the right edge off
 		side_chopper();
 	}
 }
 
-left_or_right_overhang_panel();
+bottom_panel_left();

src/bottom-panel-overhang-middle.scad

@@ -5,13 +5,14 @@
 
 include <parameters.scad>
 include <components.scad>
-use <left-or-right-panel.scad>
+use <bottom-panel-overhang-left.scad>
+use <bottom-panel-overhang-right.scad>
 
-module middle_overhang_panel() {
+module bottom_panel_middle() {
 	intersection() {
-		left_or_right_overhang_panel();
-		mirror([1, 0, 0]) left_or_right_overhang_panel();
+		bottom_panel_left();
+		bottom_panel_right();
 	}
 }
 
-middle_overhang_panel();
+bottom_panel_middle();

src/bottom-panel-overhang-right.scad

@@ -0,0 +1,14 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <bottom-panel-overhang-left.scad>
+
+module bottom_panel_right() {
+	rotate([0, 0, 180]) bottom_panel_left();
+}
+
+bottom_panel_right();

src/bottom-panel-overhang-solo.scad

@@ -6,11 +6,11 @@
 include <parameters.scad>
 include <components.scad>
 
-module solo_overhang_panel() {
+module bottom_panel_solo() {
 	difference() {
 		rotate([180, 0, 0]) base_panel_with_raised_overhang();
 		rotate([180, 0, 0]) panel_holes();
 	}
 }
 
-solo_overhang_panel();
+bottom_panel_solo();

src/components.scad

@@ -168,6 +168,10 @@ module base_panel() {
 	cube([panel_x, panel_y, panel_z], center=true);
 }
 
+module base_bottom_panel() {
+	mirror([0, 0, 1]) base_panel();
+}
+
 module panel() {
 	difference() {
 		base_panel();
@@ -175,6 +179,13 @@ module panel() {
 	}
 }
 
+module bottom_panel() {
+	difference() {
+		base_bottom_panel();
+		mirror([0, 0, 1]) panel_holes();
+	}
+}
+
 module overhang_plate() {
 	top_points = [
 		// top bevel
@@ -290,11 +301,7 @@ module frame_mount_column() {
 	cube([frame_mount_column_width, frame_mount_column_width, frame_z], center=true);
 	// add some corners back to do a lame chamfer
 	linear_extrude(height=frame_z, center=true)
-		polygon([
-			[frame_mount_column_width/2, frame_mount_column_width/2],
-			[-frame_mount_column_width, frame_mount_column_width/2],
-			[frame_mount_column_width/2, -frame_mount_column_width]
-		]);
+		polygon([[10, 10], [-20, 10], [10, -20]]);
 }
 
 module side_chopper() {
@@ -331,7 +338,7 @@ module frame() {
 	difference() {
 		base_frame();
 		translate([0, 0, frame_z/2]) scale([1, 1, 2]) base_panel();
-		translate([0, 0, -frame_z/2]) scale([1, 1, 2]) base_panel();;
+		translate([0, 0, -frame_z/2]) scale([1, 1, 2]) bottom_panel();
 		translate([panel_to_frame_point_x, panel_to_frame_point_y, 0]) frame_hex_bolt_hole();
 		translate([-panel_to_frame_point_x, panel_to_frame_point_y, 0]) frame_hex_bolt_hole();
 		translate([panel_to_frame_point_x, -panel_to_frame_point_y, 0]) frame_hex_bolt_hole();

src/frame-left.scad

@@ -24,9 +24,9 @@ module left_frame() {
 		frame_cable_routing_hole();
 
 		// aux button holes
-		translate([-35.25, 101.5, 0]) rotate([270, 0, 0]) aux_control_three_button_cluster();
-		translate([-35.25, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
-		translate([-72.25, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
+		translate([-35, 101.5, 0]) rotate([270, 0, 0]) aux_control_three_button_cluster();
+		translate([-35, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
+		translate([-72, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
 		translate([2, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
 
 		// neutrix button hole

src/frame-piece-bottom-left-or-right-extended.scad

@@ -0,0 +1,29 @@
+/*
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <frame-piece-bottom-left-or-right.scad>
+
+module bottom_piece_wall() {
+	// get a slice of the piece, to use it in extruding
+	projection(cut=true) rotate([-90, 0, 0]) translate([0, frame_y/2-frame_bevel_height, 0])
+		bottom_left_or_right_frame_piece();
+}
+
+module bottom_piece_extension() {
+	// combine the original with a shrunken piece to "pull" the wall out
+	hull() {
+		linear_extrude(height=frame_extension_y) scale([1, 0.5, 1]) bottom_piece_wall();
+		linear_extrude(height=frame_bevel_height) bottom_piece_wall();
+	}
+}
+
+module extended_bottom_left_or_right_frame_piece() {
+	bottom_left_or_right_frame_piece();
+	translate([0, -frame_y/2+frame_bevel_height*2, 0]) rotate([90, 0, 0]) bottom_piece_extension();
+}
+
+extended_bottom_left_or_right_frame_piece();

src/frame-piece-bottom-left-or-right.scad

@@ -5,9 +5,9 @@
 
 include <parameters.scad>
 include <components.scad>
-use <frames/complete/left-frame.scad>
+use <frame-left.scad>
 
-module front_or_back_box_frame_piece() {
+module bottom_left_or_right_frame_piece() {
 	piece_width = panel_support_width+frame_wall+frame_mount_column_width;
 	intersection() {
 		left_frame();
@@ -16,15 +16,11 @@ module front_or_back_box_frame_piece() {
 			translate([0, -(frame_y/2)+(piece_width/2), 0]) cube([frame_x, piece_width, frame_z], center=true);
 			// ...minus the frame wall and lip on the left
 			translate([-frame_x/2+frame_wall/2, 0, 0])
-				cube([frame_wall, frame_y-frame_wall*2, frame_z], center=true);
-			linear_extrude(height=frame_z, center=true) polygon([
-				[-frame_x/2, -frame_y/2], [-frame_x/2+frame_wall, -frame_y/2+frame_wall],
-				[-frame_x/2, -frame_y/2+frame_wall]
-			]);
+				cube([frame_wall, frame_y, frame_z], center=true);
 			// ...minus a slot for the combining piece to go into
-			cube([frame_x, frame_y-(panel_support_width+frame_wall)*2, inner_frame_z/3], center=true);
+			cube([frame_x, frame_y-(panel_support_width+frame_wall)*2, frame_z/4], center=true);
 		}
 	}
 }
 
-front_or_back_box_frame_piece();
+bottom_left_or_right_frame_piece();

src/frame-piece-interconnect.scad

@@ -5,11 +5,11 @@
 
 include <parameters.scad>
 include <components.scad>
-use <box/side.scad>
+use <frame-piece-side.scad>
 
 module interconnect_frame_half_piece() {
 	translate([frame_x/2-frame_wall, 0, 0]) difference() {
-		side_box_frame_piece();
+		side_frame_piece();
 		rotate([0, 0, 180]) side_chopper();
 	}
 }

src/frame-piece-side-extended-to-bottom.scad

@@ -5,16 +5,13 @@
 
 include <parameters.scad>
 include <components.scad>
-use <frames/complete/left-frame.scad>
-use <frames/pieces/box/side.scad>
-use <front-or-back.scad>
+use <frame-piece-bottom-left-or-right-extended.scad>
+use <frame-piece-side.scad>
 
 module side_and_bottom_frame_piece_wall() {
 	// get a slice of the pieces, to use it in extruding
-	// this doesn't use the side_frame_piece because of the 45 degree angle geometry
-	// not creating a clean thing to cut, so we just take the whole wall and use that
-	projection(cut=true) rotate([0, 90, 0]) translate([frame_x/2-frame_wall-(frame_bevel_height/2), 0, 0])
-		left_frame();
+	projection(cut=true) rotate([0, 90, 0]) translate([frame_x/2-frame_bevel_height, 0, 0])
+		side_frame_piece();
 	projection(cut=true) translate([0, -frame_y/2+frame_wall, 0]) rotate([90, 90, 0]) bottom_piece_extension();
 }
 
@@ -28,7 +25,7 @@ module side_and_bottom_frame_piece_extension() {
 
 module extra_extended_left_or_right_frame_piece() {
 	difference() {
-		side_box_frame_piece();
+		side_frame_piece();
 		// chop off the old edge which is getting replaced with the extension
 		translate([-frame_x/2+frame_bevel_height/2, 0, 0]) cube([frame_bevel_height, frame_y, frame_z], center=true);
 	}

src/frame-piece-side-extended.scad

@@ -5,16 +5,12 @@
 
 include <parameters.scad>
 include <components.scad>
-use <frames/complete/left-frame.scad>
-use <frames/pieces/box/side.scad>
-use <front-or-back-clean-for-extended-side.scad>
+use <frame-piece-side.scad>
 
 module side_frame_piece_wall() {
 	// get a slice of the piece, to use it in extruding
-	// this doesn't use the side_frame_piece because of the 45 degree angle geometry
-	// not creating a clean thing to cut, so we just take the whole wall and use that
-	projection(cut=true) rotate([0, 90, 0]) translate([frame_x/2-frame_wall-(frame_bevel_height/2), 0, 0])
-		left_frame();
+	projection(cut=true) rotate([0, 90, 0]) translate([frame_x/2-frame_bevel_height, 0, 0])
+		side_frame_piece();
 }
 
 module side_frame_piece_extension() {
@@ -27,7 +23,7 @@ module side_frame_piece_extension() {
 
 module extended_bottom_left_or_right_frame_piece() {
 	difference() {
-		side_box_frame_piece();
+		side_frame_piece();
 		// chop off the old edge which is getting replaced with the extension
 		translate([-frame_x/2+frame_bevel_height/2, 0, 0]) cube([frame_bevel_height, frame_y, frame_z], center=true);
 	}

src/frame-piece-side.scad

@@ -5,19 +5,20 @@
 
 include <parameters.scad>
 include <components.scad>
-use <front-or-back.scad>
+use <frame-piece-top-left-or-right.scad>
+use <frame-piece-bottom-left-or-right.scad>
 
-module side_box_frame_piece() {
+module side_frame_piece() {
 	piece_width = panel_support_width+frame_wall+frame_mount_column_width;
 	difference() {
 		// side piece is left/right agnostic
 		frame();
 		// minus the top and bottom
-		front_or_back_box_frame_piece();
-		rotate([180, 0, 0]) front_or_back_box_frame_piece();
+		top_left_or_right_frame_piece();
+		bottom_left_or_right_frame_piece();
 		// and just chop out the rest of the frame
 		translate([piece_width, 0, 0]) cube([frame_x, frame_y+1, frame_z+1], center=true);
 	}
 }
 
-side_box_frame_piece();
+side_frame_piece();

src/frame-piece-top-left-or-right.scad

@@ -0,0 +1,26 @@
+/*
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <frame-left.scad>
+
+module top_left_or_right_frame_piece() {
+	piece_width = panel_support_width+frame_wall+frame_mount_column_width;
+	intersection() {
+		left_frame();
+		difference() {
+			// include the whole top wall (including mount columns)
+			translate([0, (frame_y/2)-(piece_width/2), 0]) cube([frame_x, piece_width, frame_z], center=true);
+			// ...minus the frame wall and lip on the left
+			translate([-frame_x/2+frame_wall/2, 0, 0])
+				cube([frame_wall, frame_y, frame_z], center=true);
+			// ...minus a slot for the combining piece to go into
+			cube([frame_x, frame_y-(panel_support_width+frame_wall)*2, frame_z/4], center=true);
+		}
+	}
+}
+
+top_left_or_right_frame_piece();

src/frame-right.scad

@@ -24,9 +24,9 @@ module right_frame() {
 		mirror([1, 0, 0]) frame_cable_routing_hole();
 
 		// aux button holes
-		translate([35.25, 101.5, 0]) rotate([270, 0, 0]) aux_control_three_button_cluster();
-		translate([35.25, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
-		translate([72.25, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
+		translate([35, 101.5, 0]) rotate([270, 0, 0]) aux_control_three_button_cluster();
+		translate([35, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
+		translate([72, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
 		translate([-2, (frame_y/2)-neutrik_panel_thickness-4, 0]) frame_cutout();
 
 		// neutrix button hole

src/frames/pieces/box/front-or-back-aux-and-neutrik.scad

@@ -1,28 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <front-or-back.scad>
-
-module front_or_back_aux_and_neutrik_box_frame_piece() {
-	difference() {
-		front_or_back_box_frame_piece();
-
-		// aux button holes
-		translate([-35.25, -101.5, 0]) rotate([90, 0, 0]) aux_control_three_button_cluster();
-		translate([-35.25, -(frame_y/2)+neutrik_panel_thickness+4, 0]) frame_cutout();
-		translate([-72.25, -(frame_y/2)+neutrik_panel_thickness+4, 0]) frame_cutout();
-		translate([2, -(frame_y/2)+neutrik_panel_thickness+4, 0]) frame_cutout();
-
-		// neutrix button hole
-		translate([frame_center_to_neutrik, -(frame_y/2)+neutrik_panel_thickness, 0])
-			rotate([270, 0, 0]) neutrik_d_mount();
-		translate([frame_center_to_neutrik, -(frame_y/2)+neutrik_panel_thickness+4, 0])
-			frame_cutout();
-	}
-}
-
-front_or_back_aux_and_neutrik_box_frame_piece();

src/frames/pieces/box/front-or-back-inner-wall.scad

@@ -1,31 +0,0 @@
-/* The inner top/bottom wall of the frame, for being displayed through a windowed part.
- *
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <front-or-back.scad>
-
-module mount_column_cutout() {
-	intersection() {
-		frame_mount_column();
-		cube([frame_mount_column_width*3/2, frame_mount_column_width*3/2, inner_frame_z*5/8], center=true);
-	}
-}
-
-module front_or_back_inner_wall_frame_piece() {
-	difference() {
-		front_or_back_box_frame_piece();
-		// minus the outer wall
-		translate([0, -(frame_y-frame_wall)/2, 0]) cube([frame_x, frame_wall, frame_z], center=true);
-		// minus half of the mounting posts (the other half provided by the outer wall)
-		translate([-panel_to_frame_point_x, -(panel_to_frame_point_y), 0]) rotate([0, 0, 180])
-			mount_column_cutout();
-		translate([panel_to_frame_point_x, -(panel_to_frame_point_y), 0]) rotate([0, 0, 270])
-			mount_column_cutout();
-	}
-}
-
-front_or_back_inner_wall_frame_piece();

src/frames/pieces/box/front-or-back-windowed-backslashes.scad

@@ -1,40 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <front-or-back.scad>
-use <front-or-back-inner-wall.scad>
-
-module backslash() {
-	polyhedron([[5, -frame_y/2, -(frame_z-panel_z*3)/2], [20, -frame_y/2, -(frame_z-panel_z*3)/2],
-			[20, -frame_y/2+frame_wall, -(frame_z-panel_z*3)/2], [5, -frame_y/2+frame_wall, -(frame_z-panel_z*3)/2],
-			[-20, -frame_y/2, (frame_z-panel_z*3)/2], [-5, -frame_y/2, (frame_z-panel_z*3)/2],
-			[-5, -frame_y/2+frame_wall, (frame_z-panel_z*3)/2], [-20, -frame_y/2+frame_wall, (frame_z-panel_z*3)/2]],
-		[[0, 1, 2, 3], [4, 5, 1, 0], [7, 6, 5, 4], [5, 6, 2, 1], [6, 7, 3, 2], [7, 4, 0, 3]]
-	);
-}
-
-module backslashes() {
-	translate([-60, 0, 0]) backslash();
-	translate([-40, 0, 0]) backslash();
-	translate([-20, 0, 0]) backslash();
-	backslash();
-	translate([20, 0, 0]) backslash();
-	translate([40, 0, 0]) backslash();
-	translate([60, 0, 0]) backslash();
-}
-
-module backslashes_windowed_front_or_back_box_frame_piece() {
-	difference() {
-		front_or_back_box_frame_piece();
-		// subtract slashes from the frame wall
-		backslashes();
-		// subtract the inner wall area that will be provided by the other piece
-		front_or_back_inner_wall_frame_piece();
-	}
-}
-
-backslashes_windowed_front_or_back_box_frame_piece();

src/frames/pieces/box/front-or-back-windowed-forwardslashes.scad

@@ -1,22 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <front-or-back.scad>
-use <front-or-back-inner-wall.scad>
-use <front-or-back-windowed-backslashes.scad>
-
-module forwardslashes_windowed_front_or_back_box_frame_piece() {
-	difference() {
-		front_or_back_box_frame_piece();
-		// subtract slashes from the frame wall
-		mirror([0, 0, 1]) backslashes();
-		// subtract the inner wall area that will be provided by the other piece
-		front_or_back_inner_wall_frame_piece();
-	}
-}
-
-forwardslashes_windowed_front_or_back_box_frame_piece();

src/frames/pieces/box/front-or-back-windowed.scad

@@ -1,23 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <front-or-back.scad>
-use <front-or-back-inner-wall.scad>
-
-module windowed_front_or_back_box_frame_piece() {
-	difference() {
-		front_or_back_box_frame_piece();
-		// subtract frame wall window
-		translate([0, -frame_y/2, 0])
-			cube([frame_x-frame_mount_column_width*3.5, (frame_wall+panel_support_width)*2,
-				frame_z-panel_z*3], center=true);
-		// subtract the inner wall area that will be provided by the other piece
-		front_or_back_inner_wall_frame_piece();
-	}
-}
-
-windowed_front_or_back_box_frame_piece();

src/frames/pieces/box/side-inner-wall.scad

@@ -1,35 +0,0 @@
-/* The inner side wall of the frame, for being displayed through a windowed part.
- *
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <side.scad>
-
-module mount_column_cutout() {
-	intersection() {
-		frame_mount_column();
-		cube([frame_mount_column_width*3/2, frame_mount_column_width*3/2, inner_frame_z*21/24], center=true);
-	}
-}
-
-module side_inner_wall_frame_piece() {
-	difference() {
-		side_box_frame_piece();
-		// minus the outer wall
-		translate([-(frame_x-frame_wall)/2, 0, 0]) cube([frame_wall, frame_y, frame_z], center=true);
-		// minus half of the mounting posts (the other half provided by the outer wall)
-		translate([-panel_to_frame_point_x, panel_to_frame_point_y, inner_frame_z/2]) rotate([0, 0, 90])
-			mount_column_cutout();
-		translate([-panel_to_frame_point_x, -(panel_to_frame_point_y), -inner_frame_z/2]) rotate([0, 0, 180])
-			mount_column_cutout();
-		translate([-panel_to_frame_point_x, panel_to_frame_point_y, -inner_frame_z/2]) rotate([0, 0, 90])
-			mount_column_cutout();
-		translate([-panel_to_frame_point_x, -(panel_to_frame_point_y), inner_frame_z/2]) rotate([0, 0, 180])
-			mount_column_cutout();
-	}
-}
-
-side_inner_wall_frame_piece();

src/frames/pieces/box/side-windowed-backslashes.scad

@@ -1,38 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <side.scad>
-use <side-inner-wall.scad>
-
-module backslash() {
-	polyhedron([[-frame_x/2, -5, -(frame_z-panel_z*3)/2], [-frame_x/2, -20, -(frame_z-panel_z*3)/2],
-			[-frame_x/2+frame_wall, -20, -(frame_z-panel_z*3)/2], [-frame_x/2+frame_wall, -5, -(frame_z-panel_z*3)/2],
-			[-frame_x/2, 20, (frame_z-panel_z*3)/2], [-frame_x/2, 5, (frame_z-panel_z*3)/2],
-			[-frame_x/2+frame_wall, 5, (frame_z-panel_z*3)/2], [-frame_x/2+frame_wall, 20, (frame_z-panel_z*3)/2]],
-		[[0, 1, 2, 3], [4, 5, 1, 0], [7, 6, 5, 4], [5, 6, 2, 1], [6, 7, 3, 2], [7, 4, 0, 3]]
-	);
-}
-
-module backslashes() {
-	translate([0, -40, 0]) backslash();
-	translate([0, -20, 0]) backslash();
-	backslash();
-	translate([0, 20, 0]) backslash();
-	translate([0, 40, 0]) backslash();
-}
-
-module backslashes_windowed_side_box_frame_piece() {
-	difference() {
-		side_box_frame_piece();
-		// subtract slashes from the frame wall
-		backslashes();
-		// subtract the inner wall area that will be provided by the other piece
-		side_inner_wall_frame_piece();
-	}
-}
-
-backslashes_windowed_side_box_frame_piece();

src/frames/pieces/box/side-windowed-forwardslashes.scad

@@ -1,22 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <side.scad>
-use <side-inner-wall.scad>
-use <side-windowed-backslashes.scad>
-
-module forwardslashes_windowed_side_box_frame_piece() {
-	difference() {
-		side_box_frame_piece();
-		// subtract slashes from the frame wall
-		mirror([0, 0, 1]) backslashes();
-		// subtract the inner wall area that will be provided by the other piece
-		side_inner_wall_frame_piece();
-	}
-}
-
-forwardslashes_windowed_side_box_frame_piece();

src/frames/pieces/box/side-windowed.scad

@@ -1,23 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <side.scad>
-use <side-inner-wall.scad>
-
-module windowed_side_box_frame_piece() {
-	difference() {
-		side_box_frame_piece();
-		// subtract frame wall window
-		translate([-frame_x/2, 0, 0])
-			cube([(frame_wall+panel_support_width)*2, frame_y-frame_mount_column_width*3.5,
-				frame_z-panel_z*3], center=true);
-		// subtract the inner wall area that will be provided by the other piece
-		side_inner_wall_frame_piece();
-	}
-}
-
-windowed_side_box_frame_piece();

src/frames/pieces/extended/front-or-back-clean-for-extended-side-aux-and-neutrik.scad

@@ -1,28 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <front-or-back-clean-for-extended-side.scad>
-
-module front_or_back_aux_and_neutrik_box_frame_piece_for_extended_side() {
-	difference() {
-		front_or_back_box_frame_piece_for_extended_side();
-
-		// aux button holes
-		translate([-35.25, -101.5, 0]) rotate([90, 0, 0]) aux_control_three_button_cluster();
-		translate([-35.25, -(frame_y/2)+neutrik_panel_thickness+4, 0]) frame_cutout();
-		translate([-72.25, -(frame_y/2)+neutrik_panel_thickness+4, 0]) frame_cutout();
-		translate([2, -(frame_y/2)+neutrik_panel_thickness+4, 0]) frame_cutout();
-
-		// neutrix button hole
-		translate([frame_center_to_neutrik, -(frame_y/2)+neutrik_panel_thickness, 0])
-			rotate([270, 0, 0]) neutrik_d_mount();
-		translate([frame_center_to_neutrik, -(frame_y/2)+neutrik_panel_thickness+4, 0])
-			frame_cutout();
-	}
-}
-
-front_or_back_aux_and_neutrik_box_frame_piece_for_extended_side();

src/frames/pieces/extended/front-or-back-clean-for-extended-side.scad

@@ -1,18 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <frames/pieces/box/front-or-back.scad>
-
-module front_or_back_box_frame_piece_for_extended_side() {
-	difference() {
-		front_or_back_box_frame_piece();
-		// ...minus the frame wall and lip on the left
-		translate([-frame_x/2+frame_wall/2, 0, 0]) cube([frame_wall, frame_y, frame_z], center=true);
-	}
-}
-
-front_or_back_box_frame_piece_for_extended_side();

src/frames/pieces/extended/front-or-back.scad

@@ -1,37 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <front-or-back-clean-for-extended-side.scad>
-
-module clean_front_or_back() {
-	difference() {
-		front_or_back_box_frame_piece_for_extended_side();
-		// chop off the lip we left on the basic piece
-		translate([-frame_x/2+frame_wall/2, 0, 0]) cube([frame_wall, frame_y, frame_z], center=true);
-	};
-}
-
-module bottom_piece_wall() {
-	// get a slice of the piece (before the bevel), to use it in extruding
-	projection(cut=true) rotate([-90, 0, 0]) translate([0, frame_y/2-(frame_wall-frame_bevel_height)*3/2, 0])
-		clean_front_or_back();
-}
-
-module bottom_piece_extension() {
-	// combine the original with a shrunken piece to "pull" the wall out
-	hull() {
-		linear_extrude(height=frame_extension_y) scale([1, 0.5, 1]) bottom_piece_wall();
-		linear_extrude(height=(frame_wall-frame_bevel_height)) bottom_piece_wall();
-	}
-}
-
-module extended_front_or_back_frame_piece() {
-	clean_front_or_back();
-	translate([0, -frame_y/2+frame_wall, 0]) rotate([90, 0, 0]) bottom_piece_extension();
-}
-
-extended_front_or_back_frame_piece();

src/misc-decorative-plate-aux-connectors-neutrik-and-rocker-cluster.scad

@@ -5,7 +5,7 @@
 
 include <parameters.scad>
 include <components.scad>
-use <neutrik-d-plate.scad>
+use <misc-neutrik-d-plate.scad>
 
 module aux_connectors_two_neutrik_cluster_decorative_plate() {
 	difference() {

src/misc-decorative-plate-aux-control-three-button-cluster.scad

@@ -5,7 +5,7 @@
 
 include <parameters.scad>
 include <components.scad>
-use <neutrik-d-plate.scad>
+use <misc-neutrik-d-plate.scad>
 
 module aux_control_three_button_cluster_decorative_plate() {
 	difference() {

src/misc-decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one-plates.scad

@@ -0,0 +1,50 @@
+/*
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+decorative_radius_scale = 1.5;
+jumbo_decorative_radius_scale = 0;
+include <components.scad>
+
+module dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate_of_plates() {
+	difference() {
+		// get a 2mm slice of the bigger button cylinders
+		union() {
+			translate([-panel_x/2, 0, -25]) {
+				hull() union() {
+					dir_arc_30mm_finger_buttons();
+					translate([-26.8, 57.2+12.9+34.5, 0]) dir_arc_30mm_thumb_button();
+				}
+			}
+			translate([panel_x/2, 0, -25]) {
+				hull() sega_2p();
+			}
+			hull() {
+				translate([-panel_x/2, 0, -25]) dir_arc_30mm_thumb_button();
+				translate([panel_x/2, -19-9-11-19-9-11, -25]) sega_2p_p1();
+			}
+			difference() {
+				translate([-60, -8, 0]) cube(60, center=true);
+				translate([-98.35, -39.25, 0]) cylinder(h=50, r=48, $fn=50, center=true);
+			}
+			difference() {
+				translate([43.35, -10.30, 0]) cube(50, center=true);
+				translate([68.35, -35.30, 0]) cylinder(h=50, r=18, $fn=50, center=true);
+			}
+			difference() {
+				translate([-10, 55, 0]) cube(43, center=true);
+				translate([-5.15, 76.25, 0]) cylinder(h=50, r=27, $fn=50, center=true);
+			}
+			translate([-7, 0, 0]) cube(80, center=true);
+		}
+		translate([0, 0, -100]) cube([500, 500, 198], center=true);
+		translate([0, 0, 100]) cube([500, 500, 198], center=true);
+		// cut out the normal holes
+		translate([-panel_x/2, 0, -1]) dir_arc_w_30mm();
+		translate([panel_x/2, 0, -1]) sega_2p_plus_one();
+	}
+}
+
+dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate_of_plates();

src/misc-neutrik-d-plate-24mm-hole.scad

@@ -5,7 +5,7 @@
 
 include <parameters.scad>
 include <components.scad>
-use <neutrik-d-plate.scad>
+use <misc-neutrik-d-plate.scad>
 
 module neutrik_d_plate_24mm() {
 	difference() {

src/misc-rocker-20mm-plate.scad

@@ -5,7 +5,7 @@
 
 include <parameters.scad>
 include <components.scad>
-use <neutrik-d-plate.scad>
+use <misc-neutrik-d-plate.scad>
 
 module rocker_plate_20mm() {
 	difference() {

src/misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one-plates.scad

@@ -1,26 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-decorative_radius_scale = 1.5;
-jumbo_decorative_radius_scale = 0;
-include <components.scad>
-
-module dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate_of_plates() {
-	difference() {
-		// get a 2mm slice of the bigger button cylinders
-		union() {
-			translate([-panel_x/2, 0, -25]) hull() dir_arc_w_30mm();
-			translate([panel_x/2, 0, -25]) hull() sega_2p_plus_one();
-		}
-		translate([0, 0, -100]) cube([500, 500, 198], center=true);
-		translate([0, 0, 100]) cube([500, 500, 198], center=true);
-		// cut out the normal holes
-		translate([-panel_x/2, 0, -1]) dir_arc_w_30mm();
-		translate([panel_x/2, 0, -1]) sega_2p_plus_one();
-	}
-}
-
-dir_arc_plus_w_30mm_and_sega_2p_plus_one_decorative_plate_of_plates();

src/panels/overhang/right-sega-2p-plus-one-plus-control-panel-with-mount.scad

@@ -1,15 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <right-sega-2p-plus-one-plus-control-panel.scad>
-
-module sega_2p_plus_one_plus_control_right_overhang_panel_with_mount() {
-	sega_2p_plus_one_plus_control_right_overhang_panel();
-	translate([30, -50, -(panel_z/2) - 3]) pcb_mount();
-}
-
-sega_2p_plus_one_plus_control_right_overhang_panel_with_mount();

src/parameters.scad

@@ -67,9 +67,6 @@ panel_x = frame_x - (frame_wall * 2);
 panel_y = frame_y - (frame_wall * 2);
 panel_z = 5;
 
-// inside the frame
-inner_frame_z = frame_z - (panel_z * 2);
-
 // how much the top plate x/y is expanded to overhang the frame
 // note that this is relative to the top plate (so the wall is added back)
 panel_overhang_amount = 8.5;

src/top-panel-inset-dir_arc-plus-w-30mm-plus-one-with-mount.scad

@@ -5,7 +5,7 @@
 
 include <parameters.scad>
 include <components.scad>
-use <dir_arc-plus-w-30mm-plus-one-panel.scad>
+use <top-panel-inset-dir_arc-plus-w-30mm-plus-one.scad>
 
 module dir_arc_w_30mm_plus_one_panel_with_mount() {
 	dir_arc_w_30mm_plus_one_panel();

src/top-panel-inset-lever-and-dir_arc-plus-w-30mm.scad

@@ -6,7 +6,7 @@
 include <parameters.scad>
 include <components.scad>
 
-module lever_and_dir_arc_w_30mm_panel() {
+module top_panel_inset_lever_and_dir_arc_w_30mm() {
 	difference() {
 		panel();
 		dir_arc_w_30mm();
@@ -15,4 +15,4 @@ module lever_and_dir_arc_w_30mm_panel() {
 	}
 }
 
-lever_and_dir_arc_w_30mm_panel();
+top_panel_inset_lever_and_dir_arc_w_30mm();

src/top-panel-inset-lever-with-mount.scad

@@ -5,7 +5,7 @@
 
 include <parameters.scad>
 include <components.scad>
-use <lever-panel.scad>
+use <top-panel-inset-lever.scad>
 
 module lever_panel_with_mount() {
 	lever_panel();

src/top-panel-inset-sega-2p-plus-one-plus-control-with-mount.scad

@@ -5,11 +5,11 @@
 
 include <parameters.scad>
 include <components.scad>
-use <sega-2p-plus-one-plus-control-panel.scad>
+use <top-panel-inset-sega-2p-plus-one-plus-control.scad>
 
-module sega_2p_plus_one_plus_control_panel_with_mount() {
-	sega_2p_plus_one_plus_control_panel();
+module top_panel_inset_sega_2p_plus_one_plus_control_with_mount() {
+	top_panel_inset_sega_2p_plus_one_plus_control();
 	translate([30, -50, -(panel_z/2) - 3]) pcb_mount();
 }
 
-sega_2p_plus_one_plus_control_panel_with_mount();
+top_panel_inset_sega_2p_plus_one_plus_control_with_mount();

src/top-panel-inset-sega-2p-plus-one-plus-control.scad

@@ -6,7 +6,7 @@
 include <parameters.scad>
 include <components.scad>
 
-module sega_2p_plus_one_plus_control_panel() {
+module top_panel_inset_sega_2p_plus_one_plus_control() {
 	difference() {
 		panel();
 		sega_2p_plus_one();
@@ -15,4 +15,4 @@ module sega_2p_plus_one_plus_control_panel() {
 	}
 }
 
-sega_2p_plus_one_plus_control_panel();
+top_panel_inset_sega_2p_plus_one_plus_control();

src/top-panel-inset-shiokenstar-left.scad

@@ -6,11 +6,11 @@
 include <parameters.scad>
 include <components.scad>
 
-module shiokenstar_left_panel() {
+module top_panel_inset_shiokenstar_left() {
 	difference() {
 		translate([-frame_x/2+frame_wall, 0, 0]) panel();
 		translate([75, 0, 0]) shiokenstar();
 	}
 }
 
-shiokenstar_left_panel();
+top_panel_inset_shiokenstar_left();

src/top-panel-inset-shiokenstar-right.scad

@@ -6,11 +6,11 @@
 include <parameters.scad>
 include <components.scad>
 
-module shiokenstar_right_panel() {
+module top_panel_inset_shiokenstar_right() {
 	difference() {
 		translate([frame_x/2-frame_wall, 0, 0]) panel();
 		translate([75, 0, 0]) shiokenstar();
 	}
 }
 
-shiokenstar_right_panel();
+top_panel_inset_shiokenstar_right();

src/top-panel-overhang-left-lever-and-dir_arc-plus-w-30mm.scad

@@ -6,7 +6,7 @@
 include <parameters.scad>
 include <components.scad>
 
-module lever_and_dir_arc_w_30mm_left_overhang_panel() {
+module top_panel_left_lever_and_dir_arc_w_30mm() {
 	difference() {
 		panel_with_raised_overhang();
 		dir_arc_w_30mm();
@@ -16,4 +16,4 @@ module lever_and_dir_arc_w_30mm_left_overhang_panel() {
 	}
 }
 
-lever_and_dir_arc_w_30mm_left_overhang_panel();
+top_panel_left_lever_and_dir_arc_w_30mm();

src/top-panel-overhang-left-lever.scad

@@ -7,7 +7,7 @@ include <parameters.scad>
 include <components.scad>
 
 // combine the lever mount and generic plate, with mounting holes
-module lever_left_overhang_panel() {
+module top_panel_left_lever() {
 	difference() {
 		// base plate
 		panel_with_raised_overhang();
@@ -18,4 +18,4 @@ module lever_left_overhang_panel() {
 	}
 }
 
-lever_left_overhang_panel();
+top_panel_left_lever();

src/top-panel-overhang-middle-dir_arc-plus-w-30mm-with-mount.scad

@@ -5,11 +5,11 @@
 
 include <parameters.scad>
 include <components.scad>
-use <middle-dir_arc-plus-w-30mm-panel.scad>
+use <top-panel-overhang-middle-dir_arc-plus-w-30mm.scad>
 
-module dir_arc_w_30mm_middle_overhang_panel_with_mount() {
-	dir_arc_w_30mm_middle_overhang_panel();
+module top_panel_middle_dir_arc_w_30mm_with_mount() {
+	top_panel_middle_dir_arc_w_30mm();
 	translate([-15, -40, -(panel_z/2) - 3]) rotate([0, 0, -45]) pcb_mount();
 }
 
-dir_arc_w_30mm_middle_overhang_panel_with_mount();
+top_panel_middle_dir_arc_w_30mm_with_mount();

src/top-panel-overhang-middle-dir_arc-plus-w-30mm.scad

@@ -6,7 +6,7 @@
 include <parameters.scad>
 include <components.scad>
 
-module dir_arc_w_30mm_middle_overhang_panel() {
+module top_panel_middle_dir_arc_w_30mm() {
 	difference() {
 		panel_with_raised_overhang();
 		dir_arc_w_30mm();
@@ -15,4 +15,4 @@ module dir_arc_w_30mm_middle_overhang_panel() {
 	}
 }
 
-dir_arc_w_30mm_middle_overhang_panel();
+top_panel_middle_dir_arc_w_30mm();

src/top-panel-overhang-right-sega-2p-plus-one-plus-control-with-mount-with-oled.scad

@@ -5,14 +5,14 @@
 
 include <parameters.scad>
 include <components.scad>
-use <right-sega-2p-plus-one-plus-control-panel-with-mount.scad>
+use <top-panel-overhang-right-sega-2p-plus-one-plus-control-with-mount.scad>
 
-module sega_2p_plus_one_plus_control_right_overhang_panel_with_mount_with_oled() {
+module top_panel_right_sega_2p_plus_one_plus_control_with_mount_with_oled() {
 	difference() {
-		sega_2p_plus_one_plus_control_right_overhang_panel_with_mount();
+		top_panel_right_sega_2p_plus_one_plus_control_with_mount();
 		translate([75, 77.5, 0]) oled_ssd1306_mount_cutout();
 	}
 	translate([75, 77.5, 0.5]) oled_ssd1306_mount();
 }
 
-sega_2p_plus_one_plus_control_right_overhang_panel_with_mount_with_oled();
+top_panel_right_sega_2p_plus_one_plus_control_with_mount_with_oled();

src/top-panel-overhang-right-sega-2p-plus-one-plus-control-with-mount.scad

@@ -0,0 +1,15 @@
+/*
+ * SPDX-FileCopyrightText: © 2023 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <parameters.scad>
+include <components.scad>
+use <top-panel-overhang-right-sega-2p-plus-one-plus-control.scad>
+
+module top_panel_right_sega_2p_plus_one_plus_control_with_mount() {
+	top_panel_right_sega_2p_plus_one_plus_control();
+	translate([30, -50, -(panel_z/2) - 3]) pcb_mount();
+}
+
+top_panel_right_sega_2p_plus_one_plus_control_with_mount();

src/top-panel-overhang-right-sega-2p-plus-one-plus-control.scad

@@ -6,7 +6,7 @@
 include <parameters.scad>
 include <components.scad>
 
-module sega_2p_plus_one_plus_control_right_overhang_panel() {
+module top_panel_right_sega_2p_plus_one_plus_control() {
 	difference() {
 		panel_with_raised_overhang();
 		sega_2p_plus_one();
@@ -15,4 +15,4 @@ module sega_2p_plus_one_plus_control_right_overhang_panel() {
 	}
 }
 
-sega_2p_plus_one_plus_control_right_overhang_panel();
+top_panel_right_sega_2p_plus_one_plus_control();

src/top-panel-overhang-right-sega-2p-plus-one-with-mount.scad

@@ -5,11 +5,11 @@
 
 include <parameters.scad>
 include <components.scad>
-use <right-sega-2p-plus-one-panel.scad>
+use <top-panel-overhang-right-sega-2p-plus-one.scad>
 
-module sega_2p_plus_one_with_mount_right_overhang_panel() {
-	sega_2p_plus_one_right_overhang_panel();
+module top_panel_right_sega_2p_plus_one_with_mount() {
+	top_panel_right_sega_2p_plus_one();
 	translate([30, -50, -(panel_z/2) - 3]) pcb_mount();
 }
 
-sega_2p_plus_one_with_mount_right_overhang_panel();
+top_panel_right_sega_2p_plus_one_with_mount();

src/top-panel-overhang-right-sega-2p-plus-one.scad

@@ -6,7 +6,7 @@
 include <parameters.scad>
 include <components.scad>
 
-module sega_2p_plus_one_right_overhang_panel() {
+module top_panel_right_sega_2p_plus_one() {
 	difference() {
 		panel_with_raised_overhang();
 		sega_2p_plus_one();
@@ -14,4 +14,4 @@ module sega_2p_plus_one_right_overhang_panel() {
 	}
 }
 
-sega_2p_plus_one_right_overhang_panel();
+top_panel_right_sega_2p_plus_one();

src/top-panel-overhang-solo-dir_arc-24mm-6-button.scad

@@ -6,11 +6,11 @@
 include <parameters.scad>
 include <components.scad>
 
-module dir_arc_24mm_6_button_solo_overhang_panel() {
+module dir_arc_24mm_6_button_panel() {
 	difference() {
 		panel_with_raised_overhang();
 		translate([-71.5, -panel_y/2+122.5, 0]) dir_arc_24mm_6_button();
 	}
 }
 
-dir_arc_24mm_6_button_solo_overhang_panel();
+dir_arc_24mm_6_button_panel();

src/top-panel-overhang-solo-dir_arc-plus-w-24mm-8-button.scad

@@ -6,11 +6,11 @@
 include <parameters.scad>
 include <components.scad>
 
-module dir_arc_plus_w_24mm_8_button_solo_overhang_panel() {
+module dir_arc_plus_w_24mm_8_button_panel() {
 	difference() {
 		panel_with_raised_overhang();
 		translate([-80.5, panel_y/6, 0]) dir_arc_plus_w_24mm_8_button();
 	}
 }
 
-dir_arc_plus_w_24mm_8_button_solo_overhang_panel();
+dir_arc_plus_w_24mm_8_button_panel();

src/top-panel-overhang-solo-lever-and-sega-2p-6-button.scad

@@ -6,7 +6,7 @@
 include <parameters.scad>
 include <components.scad>
 
-module lever_and_sega_2p_6_button_solo_overhang_panel() {
+module top_panel_solo_lever_and_sega_2p_6_button() {
 	difference() {
 		// base plate
 		union() {
@@ -18,4 +18,4 @@ module lever_and_sega_2p_6_button_solo_overhang_panel() {
 	}
 }
 
-lever_and_sega_2p_6_button_solo_overhang_panel();
+top_panel_solo_lever_and_sega_2p_6_button();