TODO.md

@@ -5,7 +5,6 @@ Notes for "next time".
 ## v2
 
 * I need at least 5mm, maybe 10mm, more height, to fit some of my levers like the Nobi Bullet
-    * I couldn't even fit a JLF without the compensations in v1 on the bottom panel
 * The panels' connection points could probably be a bit thinner to accommodate more bolts. A 20mm bolt barely clears the
   two panels and I don't like that kind of bolt connection.
 * Engraving some cosmetic stuff? Or maybe a place to mount other plates?

src/bottom-panel-concave.scad

@@ -1,29 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of bullet-system-stick.
- *
- * bullet-system-stick is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * bullet-system-stick is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * bullet-system-stick. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <components.scad>
-use <bottom-panel.scad>
-
-module bottom_panel_concave() {
-	difference() {
-		bottom_panel();
-		translate([0, 0, top_plate_z/2]) cube([top_plate_x*2/3, top_plate_y*2/3, top_plate_z], center=true);
-	}
-}
-
-bottom_panel_concave();

src/components.scad

@@ -235,24 +235,6 @@ module frame() {
 
 /* LAYOUTS */
 
-module dir_arc_30mm_button_l() {
-	translate([68, 132, 0]) button_30mm_hole();
-}
-
-module dir_arc_w_30mm() {
-	dir_arc_30mm_button_l();
-	translate([35, 0, 0]) dir_arc_30mm_button_l();
-	translate([35+33.5, -12.9, 0]) dir_arc_30mm_button_l();
-	translate([35+7, 34.5, 0]) dir_arc_30mm_button_l();
-	// just my guesstimate on this one, but note that this is the same position as sega 2p (just mirrored)
-	translate([top_plate_x-33.06, 145-19-9-11-19-9-11, 0]) button_30mm_hole();
-}
-
-module dir_arc_w_30mm_plus_one() {
-	dir_arc_w_30mm();
-	translate([-33.5, -12.9, 0]) dir_arc_30mm_button_l();
-}
-
 module noir_button_p1() {
 	translate([40, 145, 0]) button_30mm_hole();
 }

src/top-panel-dir_arc-plus-w-30mm-plus-one.scad

@@ -1,28 +0,0 @@
-/* Copyright Brian Stephan 2023
- *
- * This file is part of bullet-system-stick.
- *
- * bullet-system-stick is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by the
- * Free Software Foundation, either version 3 of the License, or (at your
- * option) any later version.
- *
- * bullet-system-stick is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * bullet-system-stick. If not, see <https://www.gnu.org/licenses/>.
- */
-
-include <components.scad>
-
-module dir_arc_w_30mm_plus_one_panel() {
-	difference() {
-		translate([top_plate_x/2, top_plate_y/2, 0]) topplate();
-		dir_arc_w_30mm_plus_one();
-	}
-}
-
-dir_arc_w_30mm_plus_one_panel();