bss/buildable-stick-system
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 9 Wiki Activity

update TODO and README notes

Browse Source 
no known issues!
This commit is contained in:
Brian S. Stephan 2023-09-06 14:47:14 -05:00
parent 8140d5e3a8
commit ff19699d61
Signed by: bss
GPG Key ID: 3DE06D3180895FCB
2 changed files with 1 additions and 17 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
README.md
View File

@ -43,13 +43,7 @@ What you'll need beyond these objects:
### Issues and Limitations ### Issues and Limitations
This is a living repository, and as such, there are likely issues with the objects, known or otherwise. Be aware: This is a living repository, and as such, there are likely issues with the objects, known or otherwise.
* A composition error made the frame 5mm shorter than intended and wasn't noticed until I printed everything:
* Some levers don't have enough clearance in the case.
* Buttons with traditional quick connects are a *very* tight fit, you will probably need to bend pins.
* The PCB mount position was very tight on the buttons panel; it will probably have to be moved.
These issues may be fixed in the future; see `TODO.md` for details. These issues may be fixed in the future; see `TODO.md` for details.
## Development and Contributing ## Development and Contributing

10
TODO.md
View File

@ -2,16 +2,6 @@
Notes for "next time". Notes for "next time".
## v2
* I need at least 5mm, maybe 10mm, more height, to fit some of my levers like the Nobi Bullet
* I couldn't even fit a JLF without the compensations in v1 on the bottom panel
* I had to bend the pins a bit on Crown SDB-202s, too
* The plates bow a bit on the top when pressure is applied, because there's no support from the frame up there ---
adding 5mm to the frame should leave a couple mm for support to get added back
* PCB mount on `top-panel-dir_arc-plus-w-30mm-plus-one-with-mount.scad` doesn't leave room for a USB cable on the right
hand side
## v3 ## v3
* Check that the 24mm cutouts in the frame are good enough, somehow I didn't have them when I printed v2 * Check that the 24mm cutouts in the frame are good enough, somehow I didn't have them when I printed v2