move my many, many decorative plates and similar to their own dir

finally making a plates/ instead of stuffing everything in misc/

Signed-off-by: Brian S. Stephan <bss@incorporeal.org>

README.md

@@ -57,11 +57,15 @@ about what the types of parts are and how to use them:
       these is that they aren't as reusable as the inset panels, since the inset panels can go anywhere, but the
       overhang panels must be designed to not overlap with other overhang panels, so you might have to make more custom
       variants depending on where you put things.
-* `misc/`
+* `plates/`
-    * Pieces that I haven't organized better (yet) --- there are decorative plates for top buttons and similar to give
+    * Flat pieces used for cosmetic or connective reasons --- decorative plates for top buttons and similar to give
       more color variance and some layers to the arcade stick, some very simple dustwashers, plates that fit rocker
       switches and the like in Neutrik D or 20mm holes, and a lever mount spacer for getting your lever shaft at the
       desired height. You don't *need* any of these, but you'll probably use a few.
+* `misc/`
+    * Pieces that I haven't organized better (yet) --- odd things and scratch ideas, mostly. There are some decorative
+      corners for a bit more height/nicer seams, a sleeve to make smaller hex spacers fit in the hole as they're
+      supposed to, things of that nature.
 * `extras/`
     * Various experiments and things not directly related to making an arcade stick. At time of writing, there's a
       couple pieces for a little stand for the stick, solely for vanity purposes.

demo/all-together-demo-extended-with-windows.scad

@@ -10,9 +10,9 @@ use <frames/pieces/front-or-back-aux-and-neutrik.scad>
 use <frames/pieces/front-or-back-windowed-horiz-stripes.scad>
 use <panels/inset/lever-and-dir_arc-plus-w-30mm-panel.scad>
 use <panels/inset/sega-2p-nine-plus-aux-button-with-mount.scad>
-use <misc/decorative-plate-24mm-button.scad>
+use <plates/decorative-plate-24mm-button.scad>
-use <misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-nine.scad>
+use <plates/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-nine.scad>
-use <misc/dustwasher-lsx-nobi.scad>
+use <plates/dustwasher-lsx-nobi.scad>
 
 top_panel_color        = "#5B6579";
 bottom_panel_color     = "#8E9089";

demo/all-together-demo-extended.scad

@@ -10,9 +10,9 @@ use <frames/pieces/front-or-back-trapezoid.scad>
 use <frames/pieces/front-or-back-aux-and-neutrik.scad>
 use <panels/inset/lever-and-ergo-wasd-five-panel-with-oled.scad>
 use <panels/inset/ergo-nine-plus-aux-button-with-mount.scad>
-use <misc/decorative-plate-24mm-button.scad>
+use <plates/decorative-plate-24mm-button.scad>
-use <misc/decorative-plate-ergo-wasd-five-30mm-and-ergo-nine-30mm.scad>
+use <plates/decorative-plate-ergo-wasd-five-30mm-and-ergo-nine-30mm.scad>
-use <misc/dustwasher-lsx-nobi.scad>
+use <plates/dustwasher-lsx-nobi.scad>
 
 top_panel_color        = "#0086D6";
 bottom_panel_color     = "white";

demo/all-together-demo-solo.scad

@@ -10,7 +10,7 @@ use <frames/pieces/side-trapezoid-extended-to-front-trapezoid.scad>
 use <frames/pieces/front-or-back-aux-and-neutrik.scad>
 use <panels/inset/lever-and-dir_arc-plus-w-30mm-panel.scad>
 use <panels/inset/lever-and-sega-2p-6-button-panel-with-aux-with-mount.scad>
-use <misc/dustwasher-jlf.scad>
+use <plates/dustwasher-jlf.scad>
 
 top_panel_color        = "#5B6579";
 bottom_panel_color     = "#8E9089";

demo/all-together-demo.scad

@@ -10,9 +10,9 @@ use <frames/pieces/front-or-back.scad>
 use <frames/pieces/front-or-back-aux-and-neutrik.scad>
 use <panels/inset/lever-and-ergo-wasd-five-panel-with-oled.scad>
 use <panels/inset/ergo-nine-plus-aux-button-with-mount.scad>
-use <misc/decorative-plate-24mm-button.scad>
+use <plates/decorative-plate-24mm-button.scad>
-use <misc/decorative-plate-ergo-wasd-five-30mm-and-ergo-nine-30mm.scad>
+use <plates/decorative-plate-ergo-wasd-five-30mm-and-ergo-nine-30mm.scad>
-use <misc/dustwasher-lsx-nobi.scad>
+use <plates/dustwasher-lsx-nobi.scad>
 
 panel_color    = "red";
 base_color     = "gray";

demo/blown-up-demo.scad

@@ -12,9 +12,9 @@ use <frames/pieces/front-or-back-aux-and-neutrik.scad>
 use <panels/overhang/left-lever-and-dir_arc-plus-w-30mm-panel.scad>
 use <panels/overhang/right-sega-2p-nine-plus-aux-button-with-mount.scad>
 use <panels/overhang/left-or-right-panel.scad>
-use <misc/decorative-plate-24mm-button.scad>
+use <plates/decorative-plate-24mm-button.scad>
-use <misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-nine.scad>
+use <plates/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-nine.scad>
-use <misc/dustwasher-lsx-nobi.scad>
+use <plates/dustwasher-lsx-nobi.scad>
 
 color("#C12E1F") translate([-panel_x/2-25, 0, frame_z/2+75]) lever_and_dir_arc_w_30mm_left_overhang_panel();
 color("#C12E1F") translate([panel_x/2+25, 0, frame_z/2+75]) sega_2p_nine_plus_aux_button_right_overhang_panel_with_mount();

docs/assembly-and-tips.md

@@ -27,17 +27,17 @@ The pieces you need to print (all colors to your taste):
 The above gets you the basics. Some common things you may also want:
 
 * **Mounting Neutrik connectors:** Neutrik D connectors can mount flush to the inside of the frame, but you can choose
-  to have a little decorative plate (`misc/neutrik-d-plate.stl` for added depth or color choices on the outside of the
+  to have a little decorative plate (`plates/neutrik-d-plate.stl` for added depth or color choices on the outside of the
   frame, if you'd like.
 * **Mounting a 24mm switch:** a rocker switch can also be mounted in the Neutrik D connector, but it needs to be placed
-  into a `misc/neutrik-d-plate-24mm-hole.stl` plate, and the plate mounted to the frame.
+  into a `plates/neutrik-d-plate-24mm-hole.stl` plate, and the plate mounted to the frame.
 * **Flair for the auxillary buttons:** the three buttons in a row on the back of the frame can also get some style, just
-  place a `misc/decorative-plate-aux-control-three-button-cluster.stl` between the buttons and the frame. This only
+  place a `plates/decorative-plate-aux-control-three-button-cluster.stl` between the buttons and the frame. This only
   works for screw-in buttons.
 * **Flair for the top buttons:** same as above, a decorative plate for top panel layouts --- e.g.
-  `misc/decorative-plate-sega-2p.stl` --- can be sandwiched between the buttons and panel to add some style. This also
+  `plates/decorative-plate-sega-2p.stl` --- can be sandwiched between the buttons and panel to add some style. This also
   only tends to work on screw-in buttons.
-* **Dustwashers/flair:** same deal, if you want to print one, use e.g. `misc/dustwasher-jlf.stl`.
+* **Dustwashers/flair:** same deal, if you want to print one, use e.g. `plates/dustwasher-jlf.stl`.
 
 ## Putting a BSS Stick Together
 
@@ -53,9 +53,9 @@ following is the most consistent way I've found to put one together.
    overall assembly works with your components, so again get your buttons, lever, etc., in place. You can secure them at
    this point.
     1. If you are using a button decorative plate that spans two panels --- e.g.
-       `misc/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one` --- take care to align the two panels as tightly
+       `plates/decorative-plate-dir_arc-plus-w-30mm-and-sega-2p-plus-one` --- take care to align the two panels as tightly
        as possible, and accurately, as they will be hard to adjust once everything is secured and in the frame.
-    2. If using a lever, don't forget the lever mount spacer --- `misc/lever-mount-sanwa-seimitsu` --- if you want it,
+    2. If using a lever, don't forget the lever mount spacer --- `plates/lever-mount-sanwa-seimitsu` --- if you want it,
        and tighten those mounting bolts now as well.
 3. Create the frame box by combining your frame piece parts, box or extended, together. This will be relatively stable
    just via friction fit.