GP2040-CE Binary Tools

Tools for working with GP2040-CE binary dumps.

Dependencies

Interacting with your board (e.g. getting dumps, etc.) requires picotool, and currently the expectation is that you can run it yourself before invoking these tools. That may change one day.

Installation

% git clone [URL to this repository]
% cd gp2040ce-binary-tools
% python -m venv venv
% source ./venv/bin/activate
% pip install -e .

At some point we may publish packages to e.g. pypi.

Development Installation

As above, plus also pip install -Ur requirements/requirements-dev.txt to get linters and whatnot.

Tools

In all cases, online help can be retrieved by providing the -h or --help flags to the below programs.

concatenate

concatenate combines a GP2040-CE firmware .bin file (such as from a fresh build) and a GP2040-CE board's storage section .bin, and produces a properly-offset .bin file suitable for flashing to a board. This may be useful to ensure the board is flashed with a particular configuration, for instances such as producing a binary to flash many boards with a particular configuration (specific customizations, etc.), or keeping documented backups of what you're testing with during development.

Sample usage:

% concatenate build/GP2040-CE_foo_bar.bin storage-dump.bin new-firmware-with-config.bin

visualize-storage

visualize-storage reads a dump of a GP2040-CE board's flash storage section, where the configuration lives, and prints it out for visual inspection or diffing with other tools. It can also find the storage section from a GP2040-CE whole board dump, if you have that instead. Usage is simple; just pass the tool your binary file to analyze along with the path to the Protobuf files.

Because Protobuf relies on .proto files to convey the serialized structure, you must supply them from the main GP2040-CE project, e.g. pointing this tool at your clone of the core project. Something like this would suffice for a working invocation (note: you do not need to compile the files yourself):

% visualize-storage -P ~/proj/GP2040-CE/proto -P ~/proj/GP2040-CE/lib/nanopb/generator/proto memory.bin

(In the future we will look into publishing complete packages that include the compiled _pb2.py files, so that you don't need to provide them yourself.)

Sample output:

% visualize-storage -P ~/proj/GP2040-CE/proto -P ~/proj/GP2040-CE/lib/nanopb/generator/proto ~/proj/GP2040-CE/demo-memory.bin
boardVersion: "v0.7.2"
gamepadOptions {
  inputMode: INPUT_MODE_HID
  dpadMode: DPAD_MODE_DIGITAL
  socdMode: SOCD_MODE_SECOND_INPUT_PRIORITY
  invertXAxis: false
  invertYAxis: false
  switchTpShareForDs4: true
  lockHotkeys: false
}
hotkeyOptions {
  hotkeyF1Up {
    dpadMask: 1
    action: HOTKEY_SOCD_UP_PRIORITY
  }
  hotkeyF1Down {
    dpadMask: 2
    action: HOTKEY_SOCD_NEUTRAL
  }
  ...[and so on]...
}
pinMappings {
  pinDpadUp: 19
  pinDpadDown: 18
  pinDpadLeft: 16
  pinDpadRight: 17
  pinButtonB1: 8
  pinButtonB2: 7
  pinButtonB3: 12
  pinButtonB4: 11
  pinButtonL1: 9
  pinButtonR1: 10
  pinButtonL2: 5
  pinButtonR2: 6
  pinButtonS1: 15
  pinButtonS2: 13
  pinButtonL3: 21
  pinButtonR3: 22
  pinButtonA1: 14
  pinButtonA2: 20
}
...[and so on]...
addonOptions {
  bootselButtonOptions {
    enabled: false
    buttonMap: 0
  }
  ...[and so on]...
  dualDirectionalOptions {
    enabled: true
    upPin: 23
    downPin: 27
    leftPin: 26
    rightPin: 24
    dpadMode: DPAD_MODE_DIGITAL
    combineMode: 3
  }
  ...[and so on]...
}
forcedSetupOptions {
  mode: FORCED_SETUP_MODE_OFF
}

Dumping the GP2040-CE board

These tools require a dump of your GP2040-CE board, either the storage section or the whole board, depending on the context. The storage section of a GP2040-CE board is a reserved 8 KB starting at 0x101FE000. To dump your board's storage:

% picotool save -r 101FE000 10200000 memory.bin

And to dump your whole board:

% picotool save -a whole-board.bin